Epson Stylus Photo 1400 profiles missing after Snow Leopard!

After installing Snow Leopard, I am no longer able to see the color profiles for my Epson 1400 printer in Adobe InDesign CS3 or Illustrator CS3. They do show up in Photoshop CS3 as well as Apple's Mail.app and Safari. But, they are most needed for the Adobe print programs.
I found another post that explained how to open an Epson package and copy the files to the ColorSync folder. This did not help; but, I was able to copy the profiles to the Adobe Color folder. Now they show up in InDesign. Haven't tried printing, yet, to see if they work properly. That's next. But, Apple and Adobe and Epson should fix this so others do not have this problem.

I've just upgraded from Leopard to SL on my 24in iMac.
I have an Epson SP R800 and an Epson SP 1400. Using Epson drivers for SL the 800 printer runs several blank sheets through before printing the first page. The colours are terrible. I use Adobe CS3 suite (final output in inDesign) for my brochures and can no longer print them to any decent quality.
With 1400 I just get an error mesage. I've tried the Gutenpress (or whatever it's called) alternative and while the 1400 prints with it the quality is atrocious. I've tried deleting and reinstalling the printers, resetting the lot and adding again, and no difference. I wish I had never switched from Leopard to be honest. SL may be slick (can't see any obvious benefits myself), but they could have developed it so that expensive printers still worked properly.
It also will not support Filemaker 8.5 Pro or Word 2004 - why not? A very unsatisfactory development all round that has offered no benefit that I can see at all.
If I reinstall Leopard and chuck SL in the bin would that be the best solution?
Message was edited by: DominicM
Message was edited by: DominicM

Similar Messages

  • Upgraded to Mountain Lion and CS3, I am no longer able to access the correct dialog box for fine printing with Epson Stylus Photo 1400.

    I have recently upgraded my Mac OS to Mountain Lion, and am using Photoshop CS3 together with Lightroom 5. To my absolute horror, in either Adobe program I am no longer able to access the dialog box which allows me to choose paper type, size, and print quality when attempting to print on my Epson Stylus Photo 1400. An excruciating hour on the phone with largely unintelligible folks at Epson seemed to prove the problem lies with Adobe instead of Epson. I'd greatly appreciate whatever advice might be forthcoming from the Community.

    Well, this seemed to work.. can't believe it! After a year of messing with this!
    from Stevejones5
    "I found a way around this problem. GO to HD/Library/Printers/Epson/InkjetPrinter/ICCProfiles and you will find a file labeled Pro38.profiles. This is a package file. Control click on it and reveal contents. Then you can copy all the profiles and paste them into your Colorsync folder either in the HD/Library folder or your own Home folder/Library. Then the profiles will show up in Photoshop and Lightroom."
    Key, is to Control click on the printer to "Open contents". Then open Resource folder. Copy everything in it and then paste it into the "Colorsync" folder in your Library.  (Remember, to get to Library you have to hold the command key down for it to appear in "Go" Menu for Finder.
    Then I reinstalled printer driver from Apple, then rebooted computer, then plugged in printer. And VOILA-- I can now select Epson Premium Photo Paper Luster!

  • Photoshop CS3 with Epson Stylus Photo 1400 and Mac Leopard

    I have Adobe Photoshop CS3 and an Epson Stylus PHOTO 1400 printer and Mac OS X 10.5.4.
    When I print a photo it comes out with excessive ink which smears very easily and has lines in it. It only does it in Photoshop. When I print from any other program it comes out fine. I've seen reviews online where people have printed from Macs and photoshop onto the printer and it worked. I've already contacted Epson, but they said to contact Adobe. Does anybody have any advice?

    Forget Epson's useless tech support.
    What you describe is typical of improper printer profile or usage of non-Epson paper, especially paper with gloss. Have you profiled the printer/paper and are you using Epson paper (or other paper and profiles specifically recommended here for Epson photo-quality printers) properly selected?
    Like Ramón I am on 10.4.11, not 10.5.x, but I doubt if your described problem is due to the OS version.

  • HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available"

    How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available".  I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

    You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
    If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

  • /usr/libexec/cups/filter cgpdftoraster failed (Epson Stylus Photo 1400)

    10.5.2 appears to have added support for my printer when it is plugged in to my airport express - before I upgraded it did not work at all, now it works almost perfectly.
    However, when i try to print a book from aperture (Aperture 2.0 Trial), the printer bounces on the dock and the job says that it is working, then an error flashes up and disappears and then the status changes to "stopped".
    I managed to take a screenshot in the second that the error is displayed, and it is as follows:
    "/usr/libexec/cups/filter cgpdftoraster failed"
    I have not tried printing a book when the printer is directly plugged into my laptop yet, as this is the first time that I have ever tried - everything else seems to work perfectly (Printing photos / printing from Lightroom), but not printing this book.
    The printer is an Epson Stylus Photo 1400 (A3+), but it does not seem to be a printer problem - as it never tries to send the file to the printer, it breaks before it gets that far.
    Does anyone know why this is happening and have any suggestions about how to fix it?
    Thanks.

    I concur, Aperture 2.0.1 on OS X 10.5.2 was NOT able to print to the Epson Stylus Photo 1400, and resulted in an "/usr/libexec/cups/filter/cgpdftoraster failed" message at the print driver.
    Exporting the image from Aperture to Photoshop, and printing using Photoshop, printed effortlessly; I was even able to use "Super B" paper (13"x19") Sheet-Feeder Borderless with Ultra Premium Photo Paper Semi-Glossy.

  • Epson Stylus Photo 1400 detection problem

    Hi all,
    I have an Intel based iMac with 27 inches display and a Macbook. They are both running Mac OS X 10.6.8.
    I'm trying to install my Epson Stylus Photo 1400 printer on my iMac but having quite difficult times. I installed everything that came with the Epson installation CD. But I see the problem is beyond a driver issue because my iMac does not detect the printer at all.
    When I plugged the printer to my Macbook without even installing the drivers it automatically detected that a printer is plugged in. In the case of iMac however, I even updated Epson printer drivers from Apple Software Update page but it still behaves like nothing has been plugged in to any of the USB ports. I have four ports and I tried every one them by the way. The ports themselves are OK because I have an external disk and it works in all four ports.
    Have you ever came across with such an issue where iMac does not detect a plugged in USB printer.
    Thank you.
    Alper K. Tunc

    be sure to UnCheck the 16-bit option in the Epson print dialogs (it is a known bug that causes dark, off-colr prints)
    try reviewing this CS6 Photoshop Manages Colors workflow
    and the troubleshooting tips there
    make sure you get a cean nozzel test pattern and are printing on the correct side of the paper...

  • Epson Stylus Photo R280 Stopped Working After Mac OS X Update

    I have an Epson Stylus Photo R280 hooked up to my iMac running Snow Leopard. Yes, I upgraded my drivers months ago to the Epson supplied 10.6x drivers. The other day, Software Update showed an 'Epson Printer Drivers Update' and I installed accordingly. When I try and print now, I get the following error:
    Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Con
    and the job doesn't print. I have tried uninstalling and re-installing the Epson Snow Leopard drivers, but to no avail. Is there a way to uninstall an Apple update? It seems their update has killed my printer and I can't fix it. Any help is greatly appreciated!

    This was very helpful.
    I have an Epson Photo Stylus Photo R260 and, after updating the driver through Software Update in Snow Leopard, got the same error message when I tried to print: "rastertoescpII fail."
    I did as you explained: deleted the printer from system preferences > print & fax; control-clicked to bring up the contextual message and reset my printing system; then downloaded (again) the combo update to the print driver from Epson (the driver designed for Macs running both Snow Leopard and Leopard).
    Everything's working just fine again.

  • Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks, Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks

    Hello,
    I have an Epson Stylus Photo T50 and after upgrading to OS X Mavericks it does work and is idle the whole time.
    I'm from Brazil and would like to know if an update comes out soon or is there another solution for my case?
    I'm waiting for aid

    You probably need an updated driver:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • Cannot add Epson stylus photo 1400 to printer list

    Hi,
    I just unpacked my new printer, however I don't seem to be able to install it properly. I have tried both the the driver from the website as well as the one that came with it on CD. First, installing seems to go smoothly. Then I get to a screen telling me that before I can print I will have to add it to the printer list. The next screen gives me the printer list with the Epson Stylus's name on it. However, clicking on it I am not able to select the proper device name. It just doesn't appear on the list. (click here for a screenshot: http://img8.imageshack.us/img8/8601/bild15zy6.png ) Finally, the Epson driver installation app tells me that my printer "has not been added to the printer list" and that I should better go back and try again. "Running a printer check" actually makes it draw paper in but doesn't print anyhow.
    Could someone help me with this?
    Thanks a lot.

    I now managed to install my printer. To state my problem first, so people don't have to read the whole thread again:
    My printer (this should be printer model independent) is connected directly via USB to my macbook. When I tried to add it to my printer list, I recieved the message "Error: -9672, An error occurred while trying to add the selected printer"
    As I gathered from the forums, this points to missing rights during installation. In a lucky guess, I logged onto my computer not with my usual account but with the admin account and from there I could install it without any problems!
    That is a bit strange as I should have been able to assign admin rights via entering the password from my usual account, but there you go. Strange are the ways of Apple (as with my most favourite mac problem/solution of all times: when you use the password reset feature from the install DVD, it uses an english keyboard layout, but in the standard log-in window it uses whatever the locale is set to, thus e.g. mixing z und y in German layout amongst others. This small misunderstanding cost me hours over christmas! Just thought I'd mention it in case anyone has similar trouble)
    I hope this helps,
    Otto

  • Finder search "aliases" missing after Snow Leopard upgrade

    I'm dealing with a crazy annoyance after upgrading from Leopard to Snow Leopard - currently running 10.6.2
    I have 2 duplicate, external, 1TB WestDig Drives. I have no problems accessing these drives from the Finder, but if I use Finder search or Smart Folders, the corresponding folders on the external drives never open on the first try. I always receive the message:
    +The alias “…” can’t be opened because the original item can’t be found.+
    On the second try, search result folders open fine and I don't seem to have any further problems with a folder once it has been opened successfully from within search.
    It seems that after my Snow Leopard upgrade every search on the external drive reveals "missing" folder aliases although the "aliases" appear as regular folder icons.
    I tried re-indexing Spotlight but this did not solve the problem. I also trashed my plist files for Finder and Spotlight which didn't help either.
    External Drive volume info from Terminal:
    +drwxrwxr-x 21 782 Mar 14 17:18 PHOTOGRAPHY ARCHIVE+
    FWIW I've found others having similar problems on the Apple forums HERE and HERE. I've tried their suggested PathFinder workaround without success.
    This is driving me bonkers because it renders Smart Folders somewhat useless. Additionally, these external drives work fine on my old installation of 10.5 Leopard
    Thanks for any help!

    HI,
    Try repairing disk permissions...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Epson Stylus Photo 1400 not working on 10.6.5

    I've done just about everything I've found online and both epson and apple are in denial of this situation. I'd been on the phone with apple to almost two hours and in the end they tell me that it's probably epson's drivers and that I need to contact them. Another 2 hours with epson pretty much saying I needed to contact apple.
    Is anyone else experiencing this? Whenever I print using word/photoshop or any other apps, I get nothing. My printer icon doesnt ever come up on the dock. Even when I open it manually I see that they werent added to my queue. If I try to print with Preview App, it tells me "Error While Printing"
    I've uninstalled and reinstalled drivers, remove and re added printer, I've checked and repaired disk permissions. What gives? Is it 10.6.5 causing this?

    So I went on and downloaded Print Therapy to see what is going on and here's what it found:
    The directory /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PDEPluginInterface.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCore.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCoreDeprecated.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitions.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitionsDeprecated.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMErrors.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.r is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintSettingsKeys.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintingDialogExtensions.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.h is missing!
    The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.r is missing!
    The directory /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplication.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplicationDeprecated.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.h is missing!
    The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.r is missing!
    The file /usr/share/cups/mime/apple.convs is missing!
    The file /usr/share/cups/mime/apple.types is missing!
    The directory /usr/share/cups/model is missing!
    The file /usr/share/man/man8/cups-calibrate.8.gz is missing!
    The file /usr/share/man/man8/cups-genppd.5.2.8.gz is missing!
    The file /usr/share/man/man8/cups-genppdupdate.8.gz is missing!
    I've already reinstalled 10.6.5 twice to see if that would fix but no luck.

  • Epson stylus Photo 1400

    Hi. I just replace my espon 1280 to 1400, running Mac OS X 10.5.8.
    Original printing driver was working fine for about 10 pages of printing, then this morning, when I hit print, it shows up in Que., then 10 sec. later or so, disappeared, and show up in complete job without printing.
    I just downloaded epson 13964 dmg software from epson site, and re-install it again, as well as re-started computer and printer.
    still not working.
    Does anyone have same issue and know any way to fix this issue? Thank you.

    Hi. I just successfully printed a page of word document from MS word software. The problem I had listed below was from INDD running CS4.
    Thank you!

  • PSE 6 Crashes when trying to print to Epson Stylus Photo 1400

    Has anyone had an issue with PSE 6 crashing when trying to print a single photo from the Organizer?  I have tried to print photos directly from the Organizer and each time I do, the application crashes.  I can open the photo in the editor and print directly from the editor with no problems.  It's not the printer becuase I can print from other applications to the printer.  I can also print to my HP PSC 2355 with no issues. but for some reason, I cannot get the Organizer application to print to the Epson.  I have uninstalled the printer and reinstalled it.  I have checked to see if there are any updated drivers - there are none.  I'm running PSE 6 on Windows Vista 32-bit.  Any suggestions what else I can try?  I hate that I cannot print to my new printer!

    Try deselecting the print options "EXIF Print" and "Print Image Matching".   Unfortunately, the Search function of the new forums doesn't work yet for older messages, but I did find this thread cached by Google referring to a similar problem:
    http://74.125.93.104/search?q=cache:VUoPY8opoygJ:www.adobeforums.com/webx/.59b68b01+epson+ exif+print+site:adobeforums.com&cd=5&hl=en&ct=clnk&gl=us
    (I find myself using Google more and more to search Adobe's site, unfortunately.)

  • Epson stylus photo RX595 Printer stopped after updates

    I just updated my computer stuff to 10.5.7 and my printer suddenly stopped working. I actually updates several items, but I imagine it was the OS. I can access the printer utility and it will still give me ink levels and other info, but it won't print. The status just changes to "stopped." Stuff like this makes me want to not update the computer.
    Any ideas?

    I don't have any answers for you. Something similar happened to me . . . when I went wireless with Apple Airport Extreme. I did everything: read all the postings on the topic . . . and there a zillion! I called Epson, they have NO CLUE. I finally connected the printer directly to my iMac, so I am able to print, but I am still unable to scan.
    You might try trashing all the Epson stuff in your apps folder and reinstalling from the discs or from the website. Good Luck.
    If anyone else has an idea, I'd love to hear it. I have a drawer full of Epson inkjet cartridges, so am reluctant tow switch to another printer . . . but I am sorely tempted.

  • Epson Stylus Photo 750 not working  after upgrade to,  X.5.2

    I'm not sure as to what has happened since my update, however I can't print any type of documents.
    However my printer will run a test page on head cleaning, so I know it's not the printer.
    I'm thinking it has something to do with the driver, because I keep getting this message...,
    /usr/libexec/cups/filter/rasteroepson failed
    Tried reinstalling the epson drivers, but had know luck.
    Looked through a few threads here in discussions, but did not find anything specific.
    Anyone have any thoughts?
    Thanks in advance,

    Found this link at epson USA. Hope that it helps someone.
    http://www.epson.com/cgi-bin/Store/support/SupportLeopard.jsp

Maybe you are looking for