Epson Stylus Photo 2200 RIP Software errors

I'm at my wit's end! For no apparent reason, I cannot print to my Epson Stylus Photo 2200 with my Stylus RIP Pro 2.0 PS server software from either of my 2 computers--I get the same problems from both computers. I have a Dual 1 GHz PowerPC G4 running Mac OS 10.4.7 and a new 2x2.66 GHz Dual-Core Intel Xeon running 10.4.8. I'm trying to print from Illustrator CS2. Several different things are happening when I print the job.
a) It sends the print job to print far too quickly. Sometimes it times out and never even appears in the 127.0.0.1 window, and doesn't send it to the RIP. The job simply disappears. When it does send to the printer, it stops the job, putting it on hold and when I click start jobs, it promptly stops it again and this repeats itself going nowhere.
I gave up, unplugged it, disconnected the USB, plugged it all back in, repaired permissions to both computers, restarted and then tried to print again and then:
b) In the printer list the job shows up as first printing to the RIP (127.0.0.1) for a few seconds, then it quickly bounces to the next printer on my list, an HP laser jet???!!!
I've uninstalled and reinstalled both the RIP software and the 2200 in printer setup utility and on both systems. All the files I'm trying to print will print directly to the 2200, just not through the RIP software, so I know it's communicating. The files will all print to my other printers as well, but I need to print them to the 2200 with the RIP for best quality.
When I launch the RIP software, sometimes--but not every time--I immediately get a PS server error that says: EPSONLPRService EPSONLPRService error. This happens on both computers. I have received no help from Epson whatsoever. I run a business and I must print this job. Anyone have any thoughts? Thanks!!!
Dual 1 GHz PowerPC G4 & 2x2.66 GHz Dual-Core Intel Xeon 10.4.8   Mac OS X (10.4.7)  

Thnx for the reply. I think I have a better understanding of your setup. I was thinking that you had a physical RIP, rather than it being software. That would explain why you are using the loopback address to view the spool area of the RIP.
However, could you confirm some more. Is the Epson physically connected to one Mac via USB or is it network with its own IP address?
You also mention in your original post a HP printer jobs were switching to. Is this an Ethernet or USB printer?
The reason I ask is that I was thinking that if they were both networked then there may be an addressing issue. As a test I would change the RIP software so that only the Epson printer is spooled to.
I would also only print from TextEdit. The CS2 suite is not an ideal test app, unless it is only the suite you are having trouble printing from.
I know that you have already performed a repair permissions, but I would do it after booting from the OS X disc. I'm guessing the RIP software acts as a service and starts on boot. If you boot from the disc, the service won't have started and therefore it will respond to any attempt by the system to repair it.
The other thing I would try is downloading the full 10.4.8 Combo updater for Intel and PPC and run this on both Mac's respectively.
Also, check that you have correct queue names for the LPD queue. This can cause jobs to behave as you mention. Better still, see if the software supports some other protocol such as Raw (Port 9100). If it does then you can connect using the HP Jet Direct-Socket to see if that works.
Regards,
Paul

Similar Messages

  • Epson Stylus Photo 2200 and Bonjour

    My Epson Stylus Photo 2200 printer can use either Firewire or USB. When connected directly to my G5 with Firewire I can add printer features which include setups for "Borderless" and "Minimal Margins" printing.
    However, from my MacBook Pro, after installing the latest Epson driver, I can print only in Standard mode through Bonjour. This is with the printer attached to my Airport Extreme USB port.
    I contacted Epson and this was their reply:
    "Thank you for contacting the Epson Connection.
    You will need to contact Apple and inform them that there Bonjour protocol
    doesn't support extra features like borderless and minimal margins. As
    stated before, Epson America supports the product only with a direct USB
    connection to a USB port on the computer and a direct Firewire cable to a
    firewire port on the computer. Epson America doesn't support or test any
    type of third-party printer servers, switchs, routers or Apple base
    stations. Apple has already stressed that there base stations do not
    support the Epson Status monitor. Unfortunately, if the Apple Bonjour
    protocol only supports the "Standard" printer driver, there is nothing
    Epson can do about it and you will need to talk to Apple and see if they
    have any work around. "
    How can I get this printer to use these features that I use regularly without connecting directly from computer to printer? Is there a work around?
    It seems silly to have to connect directly. After all that's why we got MacBooks - to access the internet and print - remotely!
    MacBook Pro   Mac OS X (10.4.8)   2.33 GHz Intel Core 2 Duo 2GB SDRAM
    MacBook Pro   Mac OS X (10.4.8)  

    You can try uninstalling the drivers for your printer and re-installing the printer drivers....Also, then try to add the printer port and try to check the same.....hope that should sort this out....

  • Epson Stylus Photo 2200--Roll Paper function not found

    After I reset my printer function for another problem, I lost my ability to print on Roll Paper altogether. The other fuctions that go along with the Stylus Photo 2200 driver are not made available.  I cannot print my panoramas.  I have gone around and around and around with Epson who finally seemingly gave up.
    When Stylus Photo 2200 is listed as the printer only Epson (SP2200) comes up as a companion printer.  No matter what I do, and I have done everything from dumping everything Epson and starting completely over to every thing Epson suggested. 
    It seems the menu Printer Setup Utility has changed and when the printer is listed, it only offers only "Printer Model" that stays greyed out instead of "Page Setup" which was what gave me the functions I needed to add in the past .  Is there a way to revert back to the old Printer Setup Utility?  Using the Epson Printer Utility doesn't work because, although it shows the printer driver, it offers no way to add the Roll Paper function.  I hope this makes sense and that someone can figure this out!  Thanks

    I have done everything from dumping everything Epson and starting completely over to every thing Epson suggested.
    Which was?
    What to do when you can't print
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    Which OS are you working with?  OS 10.3.9 (Panther) or OS 10.4.11 (Tiger)?

  • IPhoto 6 and Epson Stylus Photo 2200 Printer

    The photos that I print from iPhoto 6 to my Epson 2200 printer are all coming out way too green. What settings do I need to use in the print dialog -- and color management? -- to get decent results? I can print beautifully from Photoshop CS2 to the 2200. I just can't figure out what settings to use in iPhoto. Thanks in advance for your help with this question. _sidpink
    G5 Tower   Mac OS X (10.4.6)  

    Kingstone's reply was helpful even though a little discouraging. But it made me realize that the problem probably lies with the choice of which software is doing the color management. The Epson 2200 printer driver provides some "advanced" settings in the print window, and I had been specifying "No color adjustment," because that's the setting recommended when printing from Photoshop. I had simply been trying the same setting when printing from iPhoto. But I went back and printed a photo from iPhoto using the "Color Controls" setting (without changing any of the variables), and the print came out perfectly! So I've answered the question to my satisfaction thanks to Kingstone's reply -- and I don't have to go out and invest in Photoshop Elements.
    G5 Tower   Mac OS X (10.4.6)  

  • Epson Stylus Photo 2200 defective print menu in Mac X

    My print menu on my Epson 2200 suddenly changed in Mac X. It's added a dither algorhythm choice and a complex DPI menu. I don't like it, it screws up my photos and I would like to get rid of it. I have taken everything that makes reference to printer off the harddrive but it's still there. I have reinstalled, uninstalled, installed again the print drivers on the disk to no avail. I cannot get rid of this menu. The one I had before was a pain but a less complicated one and my photos printed beautifully. I might mention it is not the printer as if I go to Mac 9 with it's perfect menu, the photos print beautifully also. Anyone had this problem and, if so, what'd they do. Epson Technical help was confounded and gave up on me. What do I need to get rid of to start all over? Thanks

    You indicated in your first post that you have been installing, removing, etc. Let's try a fresh start.
    We'll do some clean up. Open Printer Setup Utility and delete any printer queues you have set up for the Epson 2200. Quit Printer Setup Utility
    Now go to the /Library/Printers folder and delete the Epson folder if there is one present. Next go to the /Library/Receipts folder and delete the "EpsonPrinterDriver.pkg" and the "SP2200 18a.pkg". You may only have one of these files or you may have both.
    You can now start a fresh installation process of the printer driver. I would recommend that you use the latest driver from the Epson site. It is listed as the "Printer Driver v1.8aAs". When you unpack the download, you will find that it places a folder "epson11019" on your Desktop. Inside this folder will be a disk image that contains the actual installer for the drivers. Run the installer.
    Now it's time to add your printer(s). We need to go back to your Desktop. As you unpacked the Epson download, a PDF file "OS X booklet.pdf" was also placed on your Desktop. Open this file. It will give you a pictorial guide on how to add your printer in OS X 10.3.x. Open Printer Setup Utility. The short version is that you open Printer Setup Utility; highlight your printer if it appears; click on the Add icon and highlight your printer; use the pop up menu to select EPSON USB or EPSON FIREWIRE; select the paper format you want to add; click Add to add the printer.
    You do not need Easy Print for your printer driver to work. Depending on the applications your are running, it may provide some extra measure of "ease of use". It should be noted however that this Easy Print is more a utility program that will only add enhancements if the application you are using is written to take advantage of the Easy Print software.
    It is only the Gimp-Print drivers that have the choices for "dither" et al. The Epson drivers are similar to those used in OS 9.x. To get at these settings, look for "Print Settings" in the Copies & Pages pop up menu.
    Matt
    Mac Mini G4; B&W G3/300    

  • Printing to Stylus Photo 2200 At High Resolution Causes Color Shift

    I recently upgraded to InDesign CS3, and I'm having color issues when printing to my Epson Stylus Photo 2200 using higher resolution settings.
    From the Print dialog box I click the Printer button and choose Print Settings from the pull down menu. For Media Type I choose Enhanced Matte Paper and set the Print Quality to Photo - 1440.
    When I print the file (a document I've printed successfully many times before) the grey process color in my logo come out burgundy, and the other colors are all off.
    If I don't adjust any of the Printer settings, the colors appear fine, but the quality is poor.
    How can I fix this issue?

    Sorry for being but I was just brought in to solve the same problem as Nobody Special and now searching forums! Both Apple Cinema monitor and Epson 2200 were calibrated with a Greytag MacBeth Eye1Photo.
    The problem is a color shift and a greater saturation of color. When the image was printed with the same system using InDesign and Photoshop CS2, it printed accurately. With CS3, the problem noted above developed.

  • TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

    Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
    I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

    After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then  the "software ... is not currently available..."
    Resetting  the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from  here
    did not help either, downloading Epson Printer Drivers.
    In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
    But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

  • Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

    Mac os x Lion version 10.7.2 installed Gutenprint for my Epson Stylus Photo 1390. Every time I try to print I get the following error message: cgpdftoraster unsupported colorSpace. Any advice would be helpful thanks.

    I don't think Lion installed it, rather you did. That said System Preferences>Print & Scan. select your Epson printer and then select Options & Supplies>Driver>Print Using>Select print Software. Then scroll down to the driver you want to use.

  • After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

    After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

    Try resetting the printing system.
    Reset Printing System
    Network printer or attached to the computer?

  • HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available"

    How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available".  I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

    You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
    If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

  • Epson Stylus Photo 1280 not working with OS X 10.4.3

    I recently updated to Tiger OS 10.4.3 and my Epson Stylus Photo 1280 no longer prints. I've attempted to delete and add it to the Printer List, but get the following error - "An error occurred while trying to add the selected printer." Along with that it reads "successful-ok-too-many-events."
    As well as this, (sorry, possibly off topic) I can no longer download files via Safari, consistantly getting the error "mounting failed." This also occurs when I try to use Software Update as well. I get the message, "Unexpected error occured."
    Any help would be greatly appreciated!
    667 MHz PowerPC G4   Mac OS X (10.4.3)  

    The last Gutenprint release was in July 2012 as version 5.2.9. Therefore, it has not been compiled or tested especially for Mavericks.
    Suggest you reset/remove the Epson printer entry in System Preferences > Printers & Scanners. Then re-add it. Leave your printer power on and connected to the Mac. Perform a software update, this may also offer the Epson Printer Drivers v2.15.1 for OS X (released Sept 11, 2013). This download supports your printer model.
    Read this brief Apple article.
    How to get the previously mentioned Epson Printer Drivers from Apple, if they weren't available through software update.

  • Adobe PSE 8 + Epson Stylus Photo PX710W - Cannot Get This Combo to Work

    Hi All
    Apologies for length of posting but I am really at the end of my tether with this. I should say that prints from this printer have not impressed me even from when I first received it about a month ago when I was printing from Epson Easyprint software. They looked washed out and not at all vibrant and I was using Epson inks and papers. However things got a whole lot worse when I started to use PSE8 which gave prints that were far darker than those on screen. Interestingly the best prints so far came from me simply inserting my SD card directly into the printer this morning but obviously that gives little-to-no control over manipulation.
    So, if somebody could help me I would really appreciate it. Here are my latest settings:
    Snow Leopard 10.6.4
    Macbook Pro 2.66 GHz Intel Core Duo
    Epson Stylus Photo PX710W
    Adobe PSE 8 (Mac)
    Note that I spent the whole of yesterday working on this to the stage where I uninstalled and reinstalled all of the Epson stuff. I also consulted the following link (and related links) and downloaded the latest Mac Updater from the Epson US site.
    http://discussions.apple.com/message.jspa?messageID=10609503
    My latest print driver from the Epson CD is showing as version 6.61
    I also loaded Epson ICC profiles
    I have calibrated my monitor using the Eye-One display 2.
    When I print in PSE I am choosing:
    Colour Settings: Always Optimise Colour for Computer Screens (I chose this because my photo file is showing as sRGB)
    Colour Management:
    Colour Handling: Photoshop Handles Colour (I disabled Printer Colour Management in another menu)
    Image Space: sRGB IEC61966-2.1
    Printer Profile: SPPXTX 810 710 Epson Glossy
    Rendering Intent: Relative Colorimetric
    I truly hope this is a case of user error on my part so all advice welcome. Or just let me know if oyu know of a better printer:)
    Many thanks
    L

    I also had enough with Epson Stylus Photo PX710W... I am buying a new printer. I have tried everything to make it print from photoshop nice vivid colors, if you consider i am using a very well calibrated monitor special for video editing. i used also Dekke settings for Colors and are not even close to the original when printed and i can't seem to figure out whats the problem. I disabled printer color management and let photoshop handle it. I tried Adobe RGB, i tried Epson Standar bla bla bla... I searched the subject very deeply as to inform everybody before posting anything that i have no problem with my videos whatsoever. I have tried numerous settings (almost all photoshop could offer) and have consumed a lot of ink and printed thousands the same picture to compare the settings and wrote with a marker on it each times the combination of settings that i did. Not even close... I realized only one thing just to also let others know and get them out of trouble... Epson Stylus Photo PX710W + Mac = Disaster! Good for windows yes, but buying a Epson Stylus Photo PX710W for your Mac? FORGET IT! I'm throwing it to the waste bin or i will just give it away to someone for free.

  • Epson Stylus Photo R280 Stopped Working After Mac OS X Update

    I have an Epson Stylus Photo R280 hooked up to my iMac running Snow Leopard. Yes, I upgraded my drivers months ago to the Epson supplied 10.6x drivers. The other day, Software Update showed an 'Epson Printer Drivers Update' and I installed accordingly. When I try and print now, I get the following error:
    Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Con
    and the job doesn't print. I have tried uninstalling and re-installing the Epson Snow Leopard drivers, but to no avail. Is there a way to uninstall an Apple update? It seems their update has killed my printer and I can't fix it. Any help is greatly appreciated!

    This was very helpful.
    I have an Epson Photo Stylus Photo R260 and, after updating the driver through Software Update in Snow Leopard, got the same error message when I tried to print: "rastertoescpII fail."
    I did as you explained: deleted the printer from system preferences > print & fax; control-clicked to bring up the contextual message and reset my printing system; then downloaded (again) the combo update to the print driver from Epson (the driver designed for Macs running both Snow Leopard and Leopard).
    Everything's working just fine again.

  • Epson Stylus Photo R320 Won't show in OS 9.2.2 Chooser

    I just purchased an Epson Stylus Photo R320, primarily to print on CDs and DVDs. This fancy new inkjet replaced my dependable Epson C-86. My problem is that after installing the Epson printing software on my G5 2.0, I can print, as usual, great in 10.4.5, but now, not in OS9.2.2 anymore. The R320 icon shows up in the left side of the Chooser, but when I select it, nothing shows up on the right side. I really don't want to go back to my C-86 since it doesn't print on CD/DVD media and I still use some old OS9 software that still works great but now won't print. I've done all the little things one might expect (i.e., throw away prefs, reinstall OSX and OS9, reinstall only OS9, permissions, etc.) but to no avail. I even reinstalled the OSX software. Nothing.
    Any thoughts on this?

    Hello 64M,
    Is Chooser showing your USB bus or is it showing the default Modem or Printer port Setting?
    Jeff

  • Epson Stylus Photo 1290 - how do I remove items from the print queue?

    Description of problem with "Epson Stylus Photo 1290" Application:
    After selecting Show Completed Jobs from the main menu (Jobs > Hide/Show Completed Jobs) I am presented with a status list of print jobs (a.k.a. "print queue") that are either marked as "Completed", "Cancelled", "On Hold", "Printing" etc. Each and every time I print an item it is added to this list.
    I simply want to clear this list.
    However, the application's "Delete" button appears to only transform a "Printing" job to a "Cancelled" job, for example.
    So how on earth do I clear the old (and, to me, useless) jobs listed in this print queue?
    I know this isn't apple software but seeking help on the EPSON sites (and the rest of the net) has led me nowhere.
    Many many thanks in advance if anyone can suggest anything!
    My set-up:
    Hardware:
    Model Identifier: MacBookPro5,1
    Boot ROM Version: MBP51.007E.B05
    SMC Version (system): 1.33f8
    Running: OS X 10.5.8
    Problem App: EPSON Stylus Photo 1290.app, version 6.0.3
    Queue name: EPSONStylus_Photo1290
    Host name: localhost
    Driver version: 3.09 (confirmed as latest)
    URL: usb://EPSON/Stylus%20Photo%201290?serial=WORLL0112061542320
    Have print log files been cleared: Yes (using MacPilot)
    Have print preferences been trashed/reset: Yes (all that I could find)
    When did this problem start: not sure, I first noticed it several months after first using it on my MBP 10.5.x

    Hmmmm. Doesn't look like I can edit my post. Okay.......
    Contrary to what I've said above, this IS an Apple issue as the problem lies in the Print Queue, which is part of the OS.
    The "fix" is to go System Preferences > Print & Fax and then delete the 1290 from the list of printers.
    When the 1290 printer is re-added its print queue is now empty AND the Delete button does as it is supposed to do - it deletes items from the queue list.
    Hooray!

Maybe you are looking for

  • Problem of JSplitPane with ScrollPane

    Does JSplitPane work with ScrollPane?i am writing 2 ScrollPanes in a JSplitPane,but i can not move the bound.Thanks!

  • Quicktime "Share" feature no longer works for me.

    For the past year now I've been using Quicktimes "Share" feature to upload videos to YouTube. As of today, the feature no longer works. When I open a video, click "Share" and then "YouTube" absolutely nothing happens. I've tried with multiple differe

  • Monitor turned pink!!! help!!

    I just got a new mac mini, OS 10.5.x (updated) I connected it to a Magnavox LCD display that happens to be also a TV. The connexion (VGA using apple DVI to VGA adaptor) worked fine for 2 weeks, now, every time I turn on the computer, the screen is dy

  • Restricted WBS during PO Creation : Department wise WBS to be allowed for PO Creation

    Dear SAP PS Members as per the SAP Standard anyone can choose the account assignment checked WBS for PR/PO Creation, however we are facing issues with this as end user may choose other department WBS out of understanding.which leads to reporting inco

  • Adobe Download Assistant cannot update itself

    Hi, My ADA 1.2 tries to update itself to version 1.2.4, but this is catch 22: the update dialog shows up, I click Download Now, then it downloads, and then the login dialogbox (Enter your Adobe ID) shows up, but it's hidden behind the update dialogbo