Epson Stylus Photo 700 won't print in OS 9.2

HI,
I got my usb to parallel adapter to work with my Stylus Photo 700 on my Blueberry with OS 10.3.9 and usbtb and gimp=Print. I have been trying to figure out how to get it to work in the classic environment-9.2.2. The Epson window comes up and Ii have access to utilities there but the "*printer is not available*"
Any ideas how to overcome that little problem?
Thanks,
Warren McNeely

If this article doesn't work:
http://docs.info.apple.com/article.html?artnum=300849
Then you need a Mac OS 9 version of both the printer driver and the USB to Parallel adapter. Unfortunately the company that makes the older version of the driver has a website domain that no longer works if Keyspan's drivers don't work. That company was Strydent, and their driver was called Powerprint. You may want to toss that printer and get one known to work in the Classic environment. Only Canon has on their support pages listings of printers that do work in the Classic environment. You may find more info that is relevant on my FAQ*:
http://www.macmaps.com/printersx.html
You may be able to find someone whos still has Strydent's software, but I wouldn't hold my breath.
- * Links to my pages may give me compensation.

Similar Messages

Epson Stylus Photo R2400 won't print large pages?

I recently upgraded to Mac OS X Leopard. I immediately had problems with printing to my Epson Stylus Photo R2400 as a print driver gutenprint had suddenly replace my Epson driver when going thu dialog to print. Called and Epson and they got me thru process of getting rid of the newly replaced gutenprint to an Epson driver. Problem is I can't print anything larger than an 8.5x11 page. The printer set up says and shows me that what I have set as an 11x17 or 13x19 is going to print. But all that prints on this large expensive paper is an area 8.5x8.5. No matter what I change in set up. Epson says they have done all they can do. (And I just found out last week they have replaced this printer with another printer). I have hundreds of dollars in newly purchased inks and I am wasting expensive paper.
Also I had to remove the patch for OS leopard to get the printer to work in this diminished capacity.
And my email signature disappeared. Can't get that back either.
But printer is my biggest problem. Any suggestions how to get this printer to work with this new OS leopard and print large sizes? I have deadlines and hate to outsource the printing when I could easily do it in house.

Well, you picked the very hardest way to do it, and as time goes on, you will probably discover many other things wrong with your system as well. You CANNOT go back to Tiger from Leopard via an archive and install; you have to wipe the drive and start over from scratch, and then transfer all your data over from a backup and reinstall most, if not all, of your applications so the right elements are in the right places. Even so you'll never get your system exactly back to where it was, unless you had a perfect bootable Tiger backup (via SuperDuper) and merely restored from that. Obviously whatever Leopard element that killed your printing capability is still on your frankenstein system of BOTH Tiger and Leopard parts.
There are hundreds of posts on the issue of reverting to Tiger from Leopard, many quite detailed. So many things are changed from upgrading from one to the other that what you attempted (unless you completely wiped the drive and all your data) has always proven disastrous, which is why I highly recommended against it after reading hundreds of horror stories here.
I suggest doing a search at downgrading from Leopard to Tiger, following those instructions if you can, and making the best of it. You'll find that springing the $200 for an external drive would have been a much better and easier solution, because it can come in very handy if you ever need to do any maintenance on your internal hard drive, or if some update or problems kill your internal drive and you can't even boot the system. Not to mention sooner or later always needing more storage capability, and even a drive for reliable backups.
I would never dream of attempting a downgrade or needing to do it in the first place (having taken precautions as to never have to), so I can't give you any further advice than that.

Epson Stylus Photo R320 Won't show in OS 9.2.2 Chooser

I just purchased an Epson Stylus Photo R320, primarily to print on CDs and DVDs. This fancy new inkjet replaced my dependable Epson C-86. My problem is that after installing the Epson printing software on my G5 2.0, I can print, as usual, great in 10.4.5, but now, not in OS9.2.2 anymore. The R320 icon shows up in the left side of the Chooser, but when I select it, nothing shows up on the right side. I really don't want to go back to my C-86 since it doesn't print on CD/DVD media and I still use some old OS9 software that still works great but now won't print. I've done all the little things one might expect (i.e., throw away prefs, reinstall OSX and OS9, reinstall only OS9, permissions, etc.) but to no avail. I even reinstalled the OSX software. Nothing.
Any thoughts on this?

Hello 64M,
Is Chooser showing your USB bus or is it showing the default Modem or Printer port Setting?
Jeff

Does Lion work with an Epson Stylus Photo R2000 Ink Jet Printer?

Does Lion work with an Epson Stylus Photo R2000 Ink Jet Printer?

Took deliverly of my R2000 yesterday 11/04/2012.
**** of a job/mission getting to connect wirelessly to OSX Lion, but thanks to the perseverence of Epson support online chat plus ultimately phone call from Epson,the problem was resolved (total 3hours 45mins online chat 45mins on phone) yes i was a gineapig as the R2000 has only been available since March 2012 here in the UK.
1. Download combo driver/utilities for R2000 Mac 10.6 (works with Lion)
2. Install latest drivers and Epsonet.
3. Connect the printer to your wireless router using a LAN cable.
4. Ensure ink is installed on startup of the printer as the printer wont for some reason communicate without it as all the printer knows is it needs ink.
5. Ensure Mac is also connected to router.
6. Run Epsonet.
7. When Epsonet has found the R2000 click next.
8. Then click Changes on the following screen.
9. Select wireless Lan.
10. Select config manually (the auto will not work with Lion)
11. Allow Epsonet to use passwords from keychain network name(SSID) + WEP password.
12. When done you will be prompted to disconnect the LAN from the printer.
13. Then Click next.
14. Ensure wireless light on printer is lit if not hold WiFi button on printer for 3 Secs.
15. If config is successful (it took me Two attempts) goto system preferences/print/scan/Add printer and add the R2000 that ends in IP.
Hope this helps someone. Epson support is a good enough reason to buy Epson IMO as mentioned with their help it took nearly 4 hours to reach the above solution at no cost to myself and believe you me i was on the verge of returning the printer to the supplier as Wireless printing is a must with a 19 month old child on the loose.
Thanks Epson/Europe

Fixed Epson Stylus Photo RX580 - Unable to print from AirPort in 10.5.x

After upgrading 1st Gen MBP 17" to 10.5.4 I could not print from the Airport, unless I used Bonjour through one of my 10.4.11 Macs. Much sadness. Found this thread: http://discussions.apple.com/thread.jspa?messageID=6170067 - near the bottom was "big ant" response (for an AL C1100). He has a 9-step process from Stepson, and it work fabulously. One suggestion - in the last step, you can choose which model driver, I advise selecting the second choice driver Epson Stylus Photo RX580 - Gutenprint v5.1.3. It adds better options for printing, especially for print quality options. I plan to try the solution on my office RX680 next.

After trying for weeks, I finally came up with a very simple workaround that allows me to print to the Stylus Pro 3800 wirelessly again. I don't know why I didn't try this before. All I did was change the way I connect the printer to the Airport Extreme Base Station from using USB to Ethernet. In the printer's front panel "Network Setup" menu I made sure that the Bonjour option was enabled.
After this, it was just a simple matter of adding the printer again from the Print Fax preference pane and everything worked!
So, if anyone else is having a similar problem, try using the Ethernet port on your printer instead of the USB one.
Cheers

Epson Stylus Photo R1800 on Linksys Printer server

hi, I'm currently running Tiger 10.4.11 on my power book G4 and trying to connect to a network printer on a Linksys Print Server (PSUS4). The printer connected to the server is an Epson Stylus Photo R1800.
I'm able to print perfectly from my computer via USB direct, but when I try to find the printer as a network printer I can't locate it.
The print utilities finds the location of printer from the Linksys server, but none of my drivers are coming up that are compatible to the printer when it finds it like that.
When the printer is turned on the print browser cannot find it at all, but when it's turned off the browser comes up with the name Linsys gave it to be discovered. It says it's connected via AppleTalk, but when I click on it to try to add the driver doesn't come up. BUT it's the correct driver when I connect manually.
What am I doing wrong? I was on the phone with tech support for an hour and 24 minutes only to be told (when transferred to a specialist) that they aren't trained for this kind of thing, neither is Linksys (who I spoke to for 30 minutes). I read the thread on the similar issue to this and don't think that it's a driver issue, but a print server issue, what do you think??
thanks for any help.
-melissa

Driver issue - the driver provided by Epson was written for USB only (well, maybe Firewire too for the 1800). You will have to use either the Gutenprint driver or the printfab driver for network printing:
http://gimp-print.sourceforge.net/MacOSX.php3
http://www.printfab.net
Sounds like your print server will work via appletalk -- but, if you want to try IP printing, don't forget to enter the correct queue name for the LPD and IPP protocols.

Epson Stylus Color 740 won't print after Tiger "upgrade"

Just loaded 10.4 onto my iMac G5. Now it won't print.
Any ideas what to do?
Thanks, guys!
Lindsay

Try Reset Printing System, a menu choice in Printer Setup Utility.
You haven't tried installing anything - don't!

Mavericks 10.9.3 / epson stylus photo px730wd: can not print cd

Hello, I have a problem with my inc printer: I can no longer print CD's!
The other thing I noticed is, that the "head cleaning tools" are no longer available.
I installed the "Epson Printer Drivers v2.17 for OS X" package but I did not see a change. The driver still says it is 2.0...
I hope you have an idea... and if it would be a hint, which CD printer IS working with machericks 10.9.3.
Thanks in advancs!

I don't know if this helps, but I've always had problems printing wireless with my Epson Photo Printer 580. I am now able to print CDs wireless by going to Epson's North America site and downloading the EPson Print CD v2.0 as well as as the common updater.

Epson Stylus Photo 1290 does not print after installing Snow Leopard

Hello.
I have this silly problem of having an old very good printer, and a very new system. Since my update the printer simply wont print. It gives me a "communication error". Printer Utility is working though ! I can check ink settings, clean the printing heads, but when printing the test page, which is completely EMPTY.
The Printer Utility taks AGES by the way, to do anything i want. VERY slow.
Oh, and yes, i also installed Gutenberg printer drivers additionally,
printing works there, but it is ooooooddly slooooow as well, **** it !!
Any ideas ? Thank you !!
Message was edited by: maringorama

btw, this is how i got to know about the "resetting printer queue" - OFFICIAL EPSON ANSWER:
(sorry for German speaking users only ...)
Bitte gehen Sie in diesem Fall wie folgt vor.
1. Löschen Sie alle Epson Drucker aus der Druckerliste.
2. Deinstallieren Sie den Treiber über die Installationsroutine. Besteht diese Möglichkeit nicht gehen Sie bitte direkt zu Punkt 3.
3. Löschen Sie den Inhalt des Ordners "Epson" unter HDD -> Library -> Printers.
4. Suchen Sie im Finder nach Druckermodell und löschen gefundene Einträge.
5. Starten Sie Ihren Mac neu.
6. Laden Sie den aktuellen Treiber von unserer Website und installieren Sie diesen. http://esupport.epson-europe.com/de-DE
7. Schließen Sie den Drucker direkt am Mac an, Kabellänge <= 2m. Sollte der Drucker im folgenden nicht gefunden werden schließen Sie ihn bitte per USB und nicht per FireWire oder Netzwerkkabel an. Verwenden Sie keinen USB-Hub und nicht den USB-Port an der Tastatur.
8. Drucker hinzufügen:
8.1 Power PC 10.x.x
Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen (unter Tiger 10.4.x dann weitere Drucker) und wählen die korrespondierende EPSON-Schnittstelle (Epson-USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
8.2 Mac-Intel 10.4.x
Gehen Sie ins Druckerdienstprogramm wählen Sie hinzufügen und wählen die korrespondierende EPSON-Schnittstelle (USB, Epson Firewire, Epson Appletalk, Epson TCP/IP) im Dialog aus. Der Drucker wird in der Auswahlliste angezeigt. Markieren Sie ihn und wählen Sie wenn möglich Papierformat "ALLE". Schließen Sie den Vorgang mit hinzufügen.
8.3 Leopard 10.5.x
Gehen Sie in Drucker & Faxe, wählen Sie hinzufügen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
8.4 Snow Leopard 10.6.x
Gehen Sie in Drucker & Faxe, wählen Sie das "+" Zeichen, wählen Sie den Drucker aus der Liste (USB/Bonjour) und prüfen Sie, daß im Feld "Drucken mit/Druckermodell" EPSON und das Kürzel für Ihren Drucker steht. z.B.: "SPRO3800". Um den Drucker per EPSON Appletalk oder per Epson Firewire hinzuzufügen, wählen Sie oben rechts das Symbol "andere". Wählen Sie hinzufügen um die Installation abzuschließen.
Beim Update von 10.4 oder 10.5 auf 10.6 empfehlen wir das Drucksystem zurückzusetzen und dann die Treiber neu zu installieren. Dieses Verfahren kann auch beim bei Punkt 1 benutzt werden. Allerdings sind dann alle Drucker gelöscht!
Falls Sie noch weitere Fragen, Wünsche oder Äußerungen haben, stehen wir Ihnen gerne zur Verfügung.
Mit freundlichen Grüßen,
EPSON Deutschland

Print quality on Epson Stylus Photo R800

Hi...
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years.
I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy.
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Does anyone have similar problems or (even better) a hint to a solution?
Note,
When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
Thanks!
Erik.

Sorry for calling you 'Frank' Frans...
Vriendelijke groet,
Erik Henken.
Op 3 jan. 2012 om 20:23 heeft "c.frans w" <[email protected]> het volgende geschreven:
Re: Print quality on Epson Stylus Photo R800
created by c.frans w in Photoshop Lightroom - View the full discussion
I would shine some light on your remark:
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom...
My name is :
Frans
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116097#4116097
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116097#4116097. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Epson Stylus Photo 1280 not working with OS X 10.4.3

I recently updated to Tiger OS 10.4.3 and my Epson Stylus Photo 1280 no longer prints. I've attempted to delete and add it to the Printer List, but get the following error - "An error occurred while trying to add the selected printer." Along with that it reads "successful-ok-too-many-events."
As well as this, (sorry, possibly off topic) I can no longer download files via Safari, consistantly getting the error "mounting failed." This also occurs when I try to use Software Update as well. I get the message, "Unexpected error occured."
Any help would be greatly appreciated!
667 MHz PowerPC G4 Mac OS X (10.4.3)

The last Gutenprint release was in July 2012 as version 5.2.9. Therefore, it has not been compiled or tested especially for Mavericks.
Suggest you reset/remove the Epson printer entry in System Preferences > Printers & Scanners. Then re-add it. Leave your printer power on and connected to the Mac. Perform a software update, this may also offer the Epson Printer Drivers v2.15.1 for OS X (released Sept 11, 2013). This download supports your printer model.
Read this brief Apple article.
How to get the previously mentioned Epson Printer Drivers from Apple, if they weren't available through software update.

Epson Stylus Photo R1800 now working

I'm posting this because I found help here and hope this will be useful. When I switched to Leopard on my Mac Pro, my R1800 printer stopped working. First it printed everything in a washed out draft mode. Then, even after doing what was suggested in this forum, I still couldn't get back t my original dialogue box, which seemed to be the only way to activate the gloss optimizer for real photo quality.
This is how I got back to a fully functioning printer (Note: don't skip any steps, like I did initially).
1. Open up the print and fax dialogue box in system preferences. Highlight the Epson printer and click on the "minus box" to delete that printer driver.
2. Restart your computer (very important)
3. Go to the Epson Website (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14121&infoType=Downloads) and download Epson EasyPrint v3.1bA and Printer Driver v3.0aAs.
4. Install both downloads.
5. Open up the print and fax dialogue box again. If the Epson R1800 shows up again, highlight it and click on the minus sign to delete it again. Then click on the "plus" sign and add the R1800 back.
6. Look for the menu that says "Print Using." Make sure to select Epson SP R1800 (1) and not the Gutenprint option.
7. Close the dialogue box and you should be good to go.
This procedure returned my original (pre-Leopard) set of options to the R1800 and, once again, I'm getting nice prints.
Note: I do have to access that menu in a new way from Photoshop
a. make sure the triangle next to Epson Stylus Photo R1800 in the print dialogue box is pointing up to reveal the expanded menu selection.
b. under the popup menu where "layout" is listed, select "Print Settings" and you should se the menu you are used to for the R1800.
I hope this helps.

Kent,
The problem here is that the original poster is using an Intel-based Mac (Mac Pro). The driver he is referring to ONLY supports Intel-based Macs (Printer Driver v3.0aAs). So, not to put too fine a point on it, but the post should have been entitled "Epson Stylus Photo R1800 Now Working for Intel-Mac - Others SOL" (grin).
Apparently Epson doesn't think many of us have computers more than a couple years old - and that they shouldn't have to support them.
The printing problem is one that has been well documented and the lack of drivers apparently only affects those "ancient" PowerPC models, not the Intel-Macs.
So, the only current solution that I have found to date is:
1. Replace your decrepid computer with a new Intel-Mac (about $7k in my case)
2. Replace your Epson printer (I hear that the HP B9180 printers are working) and hope the new one works with your ancient PowerPC.
3. Hope that Epson gets around to writing a driver for us before our photo business go belly-up.
Full Disclosure:
Somewhat tongue-in-cheek, but still extremely frustrated.
Message was edited by: Gilbert Blankenship1
null

Does maverick have a driver for the Epson stylus photo R1900, Does maverick have a driver for the Epson stylus photo R1900

I tried first with Epson but they referred me to Apple. My printer is Epson stylus photo R1900, I am interested in instaling Maverick

Hi,
I am not sure if the Printer is compatible with Mavericks, but found the Drivers for the Epson Stylus Photo R1900 Ink Jet Printer in Epson Official Website. You can go through the below link
https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=94511&BV_UseBVCook ie=yes&infoType=Downloads&platform=OSF_M_X9

Epson Stylus Photo RX680 with Bluetooth Photo Print Adapter 2 won't pair

This post describes my problem, but I couldn't reply since it has been archived:
http://discussions.apple.com/thread.jspa?messageID=7882399&#7882399
I am having the same issue with an Epson Stylus Photo RX680 and their Bluetooth Photo Print Adapter 2. I go to System Preferences -> Bluetooth -> Set Up New Device, click Continue, select Printer, and click Continue. At this point, the Bluetooth Setup Assistant sends me to the Print & Fax System Preferences window. I can add the printer under the Bluetooth heading. It finds the drivers and adds the printer to my printers list, but a test page (or anything else) won't print. The job is added to the queue, but it stops trying to print after a few seconds. If I go to the Bluetooth System Preferences, I can see the printer listed (for a while), and I notice that it is connected but not paired.
If I run the Bluetooth Setup Assistant and select Any Device instead of Printer, I see the printer in the list and can view the Passkey options. It is set to "Use a specific passkey", which is what I need. I have tried changing it to a different option and then changing it back, but it does not seem like this has an effect on how the printer is paired. I have never been asked for a passkey when attempting to add this printer, and I suspect that this is why I cannot print to it.
I have also tried enabling and disabling Bluetooth sharing, and this does not seem to have an effect, whether "require pairing" is checked or not. Isn't there some place where I can choose "Pair this device" once it has been discovered? I find it strange that I can connect to it but have no option to pair afterward (at least that I can find). To make the matter more complicated, the printer disappears from the device list in the Bluetooth System Preferences after about 30 seconds, so I have to remove the printer and reinstall it in order to see the it in the list again.
I am able to print to this printer using bluetooth from a Windows XP machine, so I don't think that there is a problem with the adapter. I am also able to print to this printer using USB, so I don't think that there is a driver problem. I believe (though I certainly could be wrong) that the issue is that the device is not paired. Can anybody help?
Thank you.
-Kyle

I was trying to find a way to use the Epson drivers because the Gutenprint drivers don't support duplexing or feeding out of the front tray on this printer, but at least this got bluetooth printing working. I downloaded the latest Gutenprint drivers (5.2.2), ran the uninstall program first to get rid of the old drivers, and then installed the new ones. I added the printer through the bluetooth heading in the Add Printer dialog, and I selected the RX680 Gutenprint driver (which was not available with the default OS X 10.5.5 installation). Once again, the printer showed up as connected but not paired in the Bluetooth System Preferences, and it disappeared from the device list after a few seconds, but printing works now. The print quality for this printer is much improved by the new drivers as well.
Bluetooth setup is mentioned in the user documentation. It's kind of a joke:
Macintosh computer: Double-click Bluetooth File Exchange in your Utilities folder and follow the on-screen instructions.
That's it. I have been disappointed with this printer on a number of occasions. If you are going to connect directly through USB, then it's probably fine. If you want to use any form of network connectivity, you had better be running Windows on any machine involved.
I'll talk with Epson support to see if I can get any further with their drivers. Since it's supposed to work, I'd like to see if I can get it to happen. Otherwise, I'll return the adapter and share the printer through a spare desktop.

Can't print using Epson Stylus Photo R300

I am new to Mac ownership and have been having issues since updating to OS10.4.9. I have an Epson Stylus Photo R300 and have been using CUPS and Gimprint to print w/o a problem (OK, I had to call tech support and spent 10 hours getting it figured out) Now, for no reason my computer won't print again. I'm not sure what the issue is. Nothing has changed. I use a wireless print server connected to my wireless router. I've tried everything today. I'd removed all print drivers, CUPS and Gimprint and reinstalled. I've tried checking to see if the router has a different IP but nothing is working.
When I go to print the utility will spool the printing and then tell me the printer is busy and it will try again later.. then it times out. I've cleared the print history and jobs but still get the message. The only time I got anything close to printing was when I selected default browser, selected the wireless router but it chose Apple talk at the communication so I just got syntax stuff to print. Nothing in English.
So any help from ANYONE would be appreciative because Apple wasn't helpful when I called today.

Is there any reason why you're not using the standard Epson supported driver? It's available here

Epson Stylus Photo 700 won't print in OS 9.2

Similar Messages

Maybe you are looking for