Epson Stylus Photo 900 not responding

My wife's Epson Stylus Photo 900 I acting up.... I can align and clean the printer with NO problem but when we try to print a document the printer utility gives us this message. (I hope I do not leave out any characters) "Error:/Library/Printers/Epson/inkjet Printer 2/Filter/rastertoespll.app/Content/Mac OS/rastertoescpll failed" Any thoughts would be appreciated. This has me baffeled.
She has a 20 inch iMac and is running Snow Leopard..

System Preference-Print & Fax-Clicked on Printer Name-Turned off Printer-Removed Printer from List-clicked on OK-Turned Printer Back on-Printer was added automatically....Bingo! Printer works

Similar Messages

Epson Stylus Photo 1280 not working with OS X 10.4.3

I recently updated to Tiger OS 10.4.3 and my Epson Stylus Photo 1280 no longer prints. I've attempted to delete and add it to the Printer List, but get the following error - "An error occurred while trying to add the selected printer." Along with that it reads "successful-ok-too-many-events."
As well as this, (sorry, possibly off topic) I can no longer download files via Safari, consistantly getting the error "mounting failed." This also occurs when I try to use Software Update as well. I get the message, "Unexpected error occured."
Any help would be greatly appreciated!
667 MHz PowerPC G4 Mac OS X (10.4.3)

The last Gutenprint release was in July 2012 as version 5.2.9. Therefore, it has not been compiled or tested especially for Mavericks.
Suggest you reset/remove the Epson printer entry in System Preferences > Printers & Scanners. Then re-add it. Leave your printer power on and connected to the Mac. Perform a software update, this may also offer the Epson Printer Drivers v2.15.1 for OS X (released Sept 11, 2013). This download supports your printer model.
Read this brief Apple article.
How to get the previously mentioned Epson Printer Drivers from Apple, if they weren't available through software update.

Epson Stylus Photo 750 not working after upgrade to, X.5.2

I'm not sure as to what has happened since my update, however I can't print any type of documents.
However my printer will run a test page on head cleaning, so I know it's not the printer.
I'm thinking it has something to do with the driver, because I keep getting this message...,
/usr/libexec/cups/filter/rasteroepson failed
Tried reinstalling the epson drivers, but had know luck.
Looked through a few threads here in discussions, but did not find anything specific.
Anyone have any thoughts?
Thanks in advance,

Found this link at epson USA. Hope that it helps someone.
http://www.epson.com/cgi-bin/Store/support/SupportLeopard.jsp

Epson Stylus Photo 1400 not working on 10.6.5

I've done just about everything I've found online and both epson and apple are in denial of this situation. I'd been on the phone with apple to almost two hours and in the end they tell me that it's probably epson's drivers and that I need to contact them. Another 2 hours with epson pretty much saying I needed to contact apple.
Is anyone else experiencing this? Whenever I print using word/photoshop or any other apps, I get nothing. My printer icon doesnt ever come up on the dock. Even when I open it manually I see that they werent added to my queue. If I try to print with Preview App, it tells me "Error While Printing"
I've uninstalled and reinstalled drivers, remove and re added printer, I've checked and repaired disk permissions. What gives? Is it 10.6.5 causing this?

So I went on and downloaded Print Therapy to see what is going on and here's what it found:
The directory /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PDEPluginInterface.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCore.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMCoreDeprecated.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitions.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMDefinitionsDeprecated.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMErrors.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintAETypes.r is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintSettingsKeys.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PMPrintingDialogExtensions.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.h is missing!
The file /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/Headers/PrintCore.r is missing!
The directory /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers is missing!
The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplication.h is missing!
The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/PMApplicationDeprecated.h is missing!
The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.h is missing!
The file /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Headers/Print.r is missing!
The file /usr/share/cups/mime/apple.convs is missing!
The file /usr/share/cups/mime/apple.types is missing!
The directory /usr/share/cups/model is missing!
The file /usr/share/man/man8/cups-calibrate.8.gz is missing!
The file /usr/share/man/man8/cups-genppd.5.2.8.gz is missing!
The file /usr/share/man/man8/cups-genppdupdate.8.gz is missing!
I've already reinstalled 10.6.5 twice to see if that would fix but no luck.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then the "software ... is not currently available..."
Resetting the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from here
did not help either, downloading Epson Printer Drivers.
In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

WIFI scan Epson Stylus Photo PX710W does not work under OS X 10.9 (Mavericks) and

Since yesterday (27/10) i have installed OS X 10.9 (Mavericks) on my iMac. Now there is a problem with my Epson Stylus Photo PX710W. I cannot scan via WIFI. It seems that the problem is with the scan.app version 3.7.1. I can oly scan via USB and cable, but that's not why I bought a WIFI printer/scanner for.
Is there anybody who can offer me a solution for my problem?

WE HAVE GOT HIM.
MAVERICKS driver for for wireless scan with EPSON STYLUS PHOTO PX710W.
Available on http://www.epson.nl/nl/nl/viewcon/corporatesite/support
Choose 1 - All in one printers
Choose 2 - EPSON STYLUS PHOTO PX710W
Choose 3 - Mac OS X - Power PC
Confirm selection
CHOOSE Direvers and software
CHOOSE the file EPSON Scan (3.761) - 24,07 MBps - 21-22-2013
Download and install AND BE HAPPY, IT'S WORKING AS BEFORE.

Epson Stylus Photo PX710W is not compatible with Mavericks

I still cannot scan with my Epson Stylus Photo PX710W. My scan driver (scan.app version 3.7.1) is not compatible with Mavericks. Who can help me?
Epson does not react to my question when the correct driver will be available.
Epson indicate to their FAQ’s, but this is will not help since the ICA scan only works when my printer/scanner is connected to my Mac via USB. I bought this EPSON printer/scanner because it was wireless. Now after just 3 years I miss this important option.
I see a lot of discussion about Epson scan drivers but little help from Epson
Who can lead me to an appropriate scan driver for my Epson device?

I disagree a bit because my Epson printer/scanner worked very well for over 3 years. It worked under Snow Leopard, Lion and Mountain Lion. But since I installed Mavericks my scanner doesn't work anymore. It's just a case that Epson is very slow in upgrading the drivers within an appropriate time on the one hand and not giving any foresight how long it takes to repair drivers on the other hand. Their website is inadequate and gives me absolute no information at all. I can understand their vision when it comes to printer/scanners which are very old i.e 10 years and mor. But not for relatively new printer/scanners.
So, if anybody can help i'll be very greatefull.

How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

Did you try removing the printer from the queue and then reinstalling it?
I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
I opened System Preference > Print & Scan and deleted the printer.
I then added the printer back and it now working again. Worth a shoot first I should think.
Much easier the a downgrade.
Allan

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW Why not?r

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

The part "scanner" of my all in one printer epson stylus photo PX 720 WD is not on duty and no driver ready to use some informations about drivers epson and mavericks ?

some news for drivers os x mavericks and epson stylus photo px720wd ?
the part "printer" is ok
the part "scanner" is of duty because no driver found
thanks

Try using the pre installed Image Capture app in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

Bought a new Mac Pro, purchased a Firewire to Thunderbolt adapter, then hooked up Epson Stylus Photo R2400 printer but the system preferences does not see the printer. Started, restarted, hit the " " to add a printer but no go.

How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro

When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
To go back to USB, you would have to delete and re-add in a similar fashion later.

Epson Stylus Photo 2200 RIP Software errors

I'm at my wit's end! For no apparent reason, I cannot print to my Epson Stylus Photo 2200 with my Stylus RIP Pro 2.0 PS server software from either of my 2 computers--I get the same problems from both computers. I have a Dual 1 GHz PowerPC G4 running Mac OS 10.4.7 and a new 2x2.66 GHz Dual-Core Intel Xeon running 10.4.8. I'm trying to print from Illustrator CS2. Several different things are happening when I print the job.
a) It sends the print job to print far too quickly. Sometimes it times out and never even appears in the 127.0.0.1 window, and doesn't send it to the RIP. The job simply disappears. When it does send to the printer, it stops the job, putting it on hold and when I click start jobs, it promptly stops it again and this repeats itself going nowhere.
I gave up, unplugged it, disconnected the USB, plugged it all back in, repaired permissions to both computers, restarted and then tried to print again and then:
b) In the printer list the job shows up as first printing to the RIP (127.0.0.1) for a few seconds, then it quickly bounces to the next printer on my list, an HP laser jet???!!!
I've uninstalled and reinstalled both the RIP software and the 2200 in printer setup utility and on both systems. All the files I'm trying to print will print directly to the 2200, just not through the RIP software, so I know it's communicating. The files will all print to my other printers as well, but I need to print them to the 2200 with the RIP for best quality.
When I launch the RIP software, sometimes--but not every time--I immediately get a PS server error that says: EPSONLPRService EPSONLPRService error. This happens on both computers. I have received no help from Epson whatsoever. I run a business and I must print this job. Anyone have any thoughts? Thanks!!!
Dual 1 GHz PowerPC G4 & 2x2.66 GHz Dual-Core Intel Xeon 10.4.8 Mac OS X (10.4.7)

Thnx for the reply. I think I have a better understanding of your setup. I was thinking that you had a physical RIP, rather than it being software. That would explain why you are using the loopback address to view the spool area of the RIP.
However, could you confirm some more. Is the Epson physically connected to one Mac via USB or is it network with its own IP address?
You also mention in your original post a HP printer jobs were switching to. Is this an Ethernet or USB printer?
The reason I ask is that I was thinking that if they were both networked then there may be an addressing issue. As a test I would change the RIP software so that only the Epson printer is spooled to.
I would also only print from TextEdit. The CS2 suite is not an ideal test app, unless it is only the suite you are having trouble printing from.
I know that you have already performed a repair permissions, but I would do it after booting from the OS X disc. I'm guessing the RIP software acts as a service and starts on boot. If you boot from the disc, the service won't have started and therefore it will respond to any attempt by the system to repair it.
The other thing I would try is downloading the full 10.4.8 Combo updater for Intel and PPC and run this on both Mac's respectively.
Also, check that you have correct queue names for the LPD queue. This can cause jobs to behave as you mention. Better still, see if the software supports some other protocol such as Raw (Port 9100). If it does then you can connect using the HP Jet Direct-Socket to see if that works.
Regards,
Paul

Borderless printing, Epson stylus photo 820

Ok, I'm trying to print this: http://www.thecoverproject.net/view.php?cover_id=1716
On an Epson Stylus Photo 820. I know this printer can do borderless prints, I just can't figure out how. Is this a driver issue or something? Is borderless printing on this printer a PC only feature? Am I missing something entirely?
Thanks for any help!

I don't have experience with the Stylus Photo 820, but I do have a Stylus Photo 890 and unfortunately borderless printing is not possible in OS X, even with the latest drivers. I went round and round with this with Epson Tech Support, who kept sending me suggestions that didn't work and finally they admitted that it was just not possible. I doubt that Epson will further update the drivers for these rather elderly printers.
Bob N.
Mac Mini 1.5 GHz; iBook 900 mHz; iPod 20 GB Mac OS X (10.4.8)

Print quality on Epson Stylus Photo R800

Hi...
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years.
I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy.
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Does anyone have similar problems or (even better) a hint to a solution?
Note,
When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
Thanks!
Erik.

Sorry for calling you 'Frank' Frans...
Vriendelijke groet,
Erik Henken.
Op 3 jan. 2012 om 20:23 heeft "c.frans w" <[email protected]> het volgende geschreven:
Re: Print quality on Epson Stylus Photo R800
created by c.frans w in Photoshop Lightroom - View the full discussion
I would shine some light on your remark:
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom...
My name is :
Frans
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116097#4116097
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116097#4116097. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Epson Stylus Photo 900 not responding

Similar Messages

Maybe you are looking for