Epson Stylus Pro 4800 with 10.7.5 - yellow printouts

Since getting a new imac I am unable to get a good printout. all the printouts are yellowish, with red flaring and type is green (see images below). I first thought my print heads were clogged due to lack of use but I had it serviced and the nozzle check and alignment are fine now. I have checked and rechecked the setting. Tried different settings. I have reinstalled the driver. I still have the old computer and now that also produces yellow printouts. Could it be the cable I'm using? I have a USB connection which I thought was a firewire at first because where it plugs in to the printer its more squarish rather than traditional usb retangle. There is an unused port that is larger that I'm not sure what its for? Perhaps there were 2 options for connecting the printer and I need to try the other one? Could it be a compatibility issue between the new computer and old printer? Could there be a glitch that I need a patch for? I've been working on this all day and I'm stumped and can't find information online or at Epson. Please send any information you may have.

As has been suggested in your other thread, most printer software includes a 'clean nozzles' command, but I would add that you should all replace all your printer ink cartridges since you said that they haven't been used for a while, as they will probably keep clogging.

Similar Messages

Bonjour with Epson Stylus Pro 4800

I can't connect the Epson Stylus Pro 4800 with Bonjour.
Bonjour detects the Printer but after a few seconds there comes this message:
Error: -9672

Shame on me! :-O
Still... it seems the -9672 error is attributable to the Printer in all the cases I've found, but a very few have been able to cure it by downloading the Instaaller/Driver from the Manufacturer, rather than using the ones on the CD.

Problem printing from cs6 photoshop to epson stylus pro 4800 printer

Has anyone had trouble printing from cs6 on a mac running lion to a epson stylus pro 4800 printer? I keep getting an error message saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."" The computer sees the printer just fine and has the latest driver installed. I have removed it and reinstalled it many times . I need help with this.

Yes, the menu items are not unavailable. We were already aware of the "Reveal Arrow" issue under OSX v10.5.3. The most important print menu items such as "Print Settings" and "Color Management" are simply not present. As previously stated we've already tried uninstalling and reinstalling the latest (v3.66) "Universal" print driver on both hosts and all of our client Macs. A resolution to this problem is very urgent as our semester begins this week and currently students can not print their next week assignments.

Epson Stylus pro 4800 on my iMac.

I am attempting to use my Epson Stylus Pro 4800 on my new iMac (OS X 10.7.3). It is connected by USB. No luck. I have installed the driver 14360.dmg however I am still unable to set up the printer. When I go to add printer no fields are available and the printer is not listed? Am I missing a step? Do I need to add more software? The disc that came with the printer says it includes drivers, not software. Help.

The printer dialogue will only show printers connected (either physically or wirelessly) to your Mac.
There's got to be a simple answer to this as your Mac should find the printer. Epson has a Lion driver, so your printer should work.
Try a different USB cable and / or plug the printer into a different USB port on your Mac, then switch your printer on.

Problem with printing (Epson Stylus Pro 4800)

All of a sudden, my black and white photos are printing in sepia tone. I have Photoshop CS3 and an Epson Sylus Pro 4800. Interestingly, in the printer profile drop-down menu, it used to say "Pro 4800 PLPP". Now it defaults to "Working RGB - sRGB IEC61966 - 2.1". I suspect it has something to do with Color Settings... but I didn't change anything. Please help!!! Thank you in advance.

Start here:
http://www.gballard.net/psd/cmstheory.html
Once you've digested that entire web site, come back if you have further problems. You need to understand color management first.

Epson Stylus Pro 4800 Printer Sharing Broken

We have 2 Epson 4800 printers, each attached via USB to it's own dedicated iMac (Intel OSX 10.5.3 w/ Epson SPR4800 Universal Driver v3.66). The iMacs have printer sharing turned on. The printers are shared across our ethernet LAN to approx 50 other Mac workstations. Over half of those are PPC G5 PowerMacs the rest are Intel MacPro's. All are running OSX 10.5.3 with the latest Epson 4800 Universal Driver v3.66.
Our problem is most of the printer control menu items are missing from the print window when client Macs attempt to print from Photoshop CS3 using Photoshop color management.
We've tried unstalling and reinstalling the lastest universal driver both on the host iMacs as well as the client PowerMac's and MacPro's. Any comments on why this happening and suggested remedies would be much appreciated.

Yes, the menu items are not unavailable. We were already aware of the "Reveal Arrow" issue under OSX v10.5.3. The most important print menu items such as "Print Settings" and "Color Management" are simply not present. As previously stated we've already tried uninstalling and reinstalling the latest (v3.66) "Universal" print driver on both hosts and all of our client Macs. A resolution to this problem is very urgent as our semester begins this week and currently students can not print their next week assignments.

Printing on a Epson Stylus Pro 7600 with Leopard & cs3 problem?

Hi
I have just setup an epson 7600 on a network, it's connected to a macbook and then shared to my imac. When i print on the iMac using preview, it comes out great when i untick the high speed printing button, when i don't untick it, i get banding straight across the page. When i print using cs3 even when i change the settings so that it doesn't print at high speed, it still does and i get banding, can anyone help?
Des
Message was edited by: desmond2002
Message was edited by: desmond2002

Here is Apple's list of supported printers from Lion: http://support.apple.com/kb/ht3669
As far as I know, this is their latest list.
Note the list is dated July 26, 2012, so it almost certainly will apply to Mountain Lion as well.

Bonjour on Windows Vista Business (Epson Stylus Pro 4800)

I've installed Bonjour 1.0.3 on Vista Business.
But the print stuck on about the half page. I think, Apple has to update Bonjour for Windows Vista.
Do you have another idea?
Best wishes.

The printer dialogue will only show printers connected (either physically or wirelessly) to your Mac.
There's got to be a simple answer to this as your Mac should find the printer. Epson has a Lion driver, so your printer should work.
Try a different USB cable and / or plug the printer into a different USB port on your Mac, then switch your printer on.

Epson stylus pro 4800 prints very yellow prints

No combination of the settings in Print dialogue, or "Print Settings..." dialogue seem to generate anything other then a dramatically yellow cast image. Photoshop on the same computer, and all tests on the PCs print normally. Other people on this list have said they can print consistently between Photoshop, Aperture and the 4800.
So is there anyone here who has a 4800 that is working for you so that I can find out what the missing piece.
Thanks

No combination of the settings in Print dialogue, or "Print Settings..." dialogue seem to generate anything other then a dramatically yellow cast image.
All other things being equal, a yellow cast could occur (1) if the gamut mapping in the ICC profile for the configuration of the printing system (hardware behaviour + inkset + paper) is compensating for a bluish tint in the paper, caused by optical brightener in the paper, by shifting the graybalance in the image towards yellow, and (2) if some other paper than the paper intended in the ICC profile were loaded. In this scenario, the compensation in the graybalance, which would appear neutral on the intended paper, now appears as a colour cast in the graybalance. Colour appearance, including graybalance compensation and softclipping in shadows (as opposed to colorimetric linear clipping) is part of the gamut mapping in the printing table, 0 Perceptual.
/hh

How do i print from iPhoto with Epson Stylus Pro 3800 Printer Driver v8.64

Please help...I'm a new user...how do i print- select paper Epson options and make colour adjustments using iphoto and Epson Stylus Pro 3800 with Printer Driver v8.64

Yes, do share your solution for others who may want to do the same with their special profiles and printers.

Networking Epson Atylus Pro 4800

I have a Firewire Epson Stylus Pro 4800 on a G4 running OSX10.2, this is on an ethernet network connected to 3 MacPros. I've just upgraded from 10.5 to 10.6 and can no longer see the Epson on the network. As Appletalk is no longer supported on Snow Leopard, is there a way to connect to the Epson? I've tried adding an IP printer using the G4's IP address with the Epson print driver, but no luck.

Contacted EFI who have said that 10.6 is NOT supported, nor are Intel macs. I will need to upgrade to EFI Express or downgrade the MacPro to 10.5.

Epson Stylus Pro 5000 & Leopard

Can I print directly from my MacPro 3GHz to my network printer Epson Stylus Pro 5000 and get top quality results. I used to have it setup using my old PowerBook G4 Ti laptop running OS9 and Stylus RIP Software.... but I purchased a new MBP with Leopard on it so I gave my PowerBook Ti to my father with Tiger running on it. I see in the support notes that Leopard comes with Gimp drivers for the Stylus Pro 5000, but when I add the printer and GIMP drivers to my print network the quality of the printouts is by no way near what it was when running the Stylus RIP software on my old OS9 laptop... does anyone have a similar problem? I was going to just go away and buy another more up to date printer e.g. the Epson R2400, but the 9 ink cartridges at 13ml each sounds very uneconomical to run... and besides... there's nothing at all wrong with my Epson Stylus Pro 5000 with 110ml cartridges... I just need to get it to work using Leopard on my MacPro 3GHz.
Any comments / ideas most welcome...
Yours sincerely,
Irish MacUser & MacAddict

Hi there Kappy and thank you for your excellent suggestion... on arriving at the website I could see it held the perfect solution, but I could not see my printer listed on the supported printers list... so I have emailed them to see if it may be a pending supported printer.... but thanks again for your excellent suggestion... I have it working direct now without a RIP using the Gimp driver... but it's painstakingly slow and the colour matching isn't as good as it was using the proper Epson Pro 5000 Driver with the Epson Stylus RIP software...
Always something in the bloody business...lol..lol
Thanks again...

Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4

Epson Stylus Pro 9800 errors on 32-bit Windows 7 with Adobe CS4
Question: We are experiencing some major errors with printing to our Epson Stylus 9800 Pro. Some of our large files are spooling about 16K, then crashing Photoshop. Sometimes we are getting partial prints (the left most 3-4 inches of print, or the file starting to print about 1/2 way into the file itself), sometimes it just spools for a few minutes, then stops, with nothing coming from the printer at all.
At Epson's request, we have tried the following:
reinstalling Windows 7 print driver
Reinstalling Adobe CS 4
Installed NEW NIC in printer
Installed new network line to printer
Installed new main board on printer
Printed from a PC directly connected to printer via USB and crossover cable
This issue is very bizarre in that it is random and sporatic. Same file will cause one of the above errors, then, another attempt to print same file will be successful. We have several Windows 7 machines that get the issue, while several Windows XP machines are fine. Epson instructed us to install the newest (win7) driver on the XP machines, issue then affects XP machines. Uninstalling new driver and re-installing old driver on XP machines resolves issue on XP machines.
Is this an issue with the Epson driver? CS4 on Windows 7? Or some other malady?
When Photoshop crashes, the following error log is created: Log Name:      Application
Source:        Application Error
Date:          10/6/2010 1:31:16 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      _PCNAME_._OUR_DOMAIN_.com
Description:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: E_FJBLDBE.DLL, version: 0.1.1.7, time stamp: 0x469dea6c
Exception code: 0xc0000005
Fault offset: 0x0001c9ba
Faulting process id: 0x1cf8
Faulting application start time: 0x01cb657c010cac1c
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL
Report Id: 85870535-d16f-11df-b849-406186f3bc8f
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-10-06T17:31:16.000000000Z" />
    <EventRecordID>5497</EventRecordID>
    <Channel>Application</Channel>
    <Computer>_PCNAME_._OUR_DOMAIN_.com</Computer>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>E_FJBLDBE.DLL</Data>
    <Data>0.1.1.7</Data>
    <Data>469dea6c</Data>
    <Data>c0000005</Data>
    <Data>0001c9ba</Data>
    <Data>1cf8</Data>
    <Data>01cb657c010cac1c</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>C:\Windows\system32\spool\DRIVERS\W32X86\3\E_FJBLDBE.DLL</Data>
    <Data>85870535-d16f-11df-b849-406186f3bc8f</Data>
</EventData>
</Event>

Giving that a go.
Thanks!

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website?

Epson Stylus Pro 4800 with 10.7.5 - yellow printouts

Similar Messages

Maybe you are looking for