Epson Stylus R220 not recognized by AEBS. Was by AX

I originally posted in the Airport & Printing section but I see this problem is specific to the Dual Band Airport Extreme.
THe subject USB printer is recognized by my AX when connected to the AX via USB but not when connected to a brand new AEBS Dual Band via USB. I've tried bot WAN and LAN configurations but no success. The 5.5 version of AIrport Admin always shows nothing on the Printers pane. Base station is running 7.5 firmware. I've done the power on/off tricks. My drivers are the latest from Epson but I don't think that's at play here. The AEBS is not recognizing the USB printer.
Aside, there are numerous Apple articles on troubleshooting that say "Not all OS X compatible printers can be base station printers". However, I cannot find any base station compatibility list. Also, the printer worked fine on the AX.

Nevermind. The Epson R220 works fine on the AEBS. Wrong USB cable was plugged into the AEBS.

Similar Messages

  • Epson Stylus SX205 not recognized as printer, only as scanner

    I try to get my Epson Stylus SX205 printer/scanner to work on my ArchLinux, but can't. The scanner part works fine, but the printer part doesn't. I have tried all the tricks in the wiki article on Cups, including adding udev rules as suggested in the section on "Device node permissions", but to no avail.
    I don't know what information to post yet, other than this:
    Kernel: 3.6.5-1-ARCH
    Cups:1.6.1-6
    Printer driver: epson-inkjet-printer-escpr-1.2.2-1
    Not (yet) using systemD
    Any help/pointer will be much appreciated. 
    /Bent
    Edit: I forgot to mention that I get this message in the system: "udev-configure-printer: no corresponding CUPS device found"
    Last edited by BentB (2012-11-05 07:05:16)

    Step 1
    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.
    Step 2
    If there's no improvement after Step 1, restore the following folder from the last backup you made before the EPSON update:
    /Library/Printers/EPSON
    You may have to reset the printing system for the change to become effective.

  • My ipad identifies my charging cable as not recognized, although it was bought at the same store, at the same time as the ipad. It charged for awhile, but now won't turn on or even charge. Any ideas?

    My ipad identifies my charging cable as not recognized, although it was bought at the same store, at the same time as the ipad. It charged for awhile, but now the ipad won't turn on or even charge. I still have all the packaging and receipt as proof. Any ideas why? Purchase was over a year  ago, so I can't get Apple help on the phone.

    Try moving and wiggle the devise  if that works the port or the tip of the charger is Brocken if the wire is an apple chatter made by Apple it should not I give your problems I've it in a forren ore different manufacturer that could be the problem apple suggest all apples devises should all ways charges and sync with an apple manufactured charger for the best proformance don't try other doggy chargers made from other manufactures.
    Hope this works
    Sinserly redwan Uddin        

  • My canon powershot SX2210 IS is not recognized. It was before I installed OSX!!

    my canon powershot SX2210 IS is not recognized. It was before I installed OSX!!

    graham135 wrote:
    my canon powershot SX2210 IS is not recognized. It was before I installed OSX!!
    Reinstall OS X in case you had a bad download or install on your previous try.  Then test to see if the problem is fixed.
    If you need to post back for other ideas, please tell us which specific Mac and Mac OS X version you are using.  Also verify your camera's model number.  The only one I could find by searching Canon's web site that is close to your "canon powershot SX2210 IS" is Canon PowerShot SX210 IS.

  • Epson Stylus C88+ not compatible

    I have Mavericks 10.9.1, and my new Epson Stylus C88+  is not compatible. any advice? I talked to Epson, they had no solution, said i should talk to apple.

    The Epson C88 driver won't work?
    You could try the Gutenprint drivers, they have one for the C88.
    http://gimp-print.sourceforge.net/p_Supported_Printers.php

  • 3gs not recognized in windows, was before now usb problem

    Windows laptop says usb does not recognize  iphone 3gs, it did before????

    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Epson Expression 1600 not recognized by Acrobat

    I've been trying for a year to get Acrobat X pro to recognize my Epson Expression Scanner, but it never does. Frustrated that I have to scan in preview or scanning software then bring document into Acrobat. Frustrating. Please Help!

    Nevermind. The Epson R220 works fine on the AEBS. Wrong USB cable was plugged into the AEBS.

  • USB device not recognized/device software was not successfully installed

    IPOD touch 4 also not showing up in ITUNES

    Just fixed my ipod nano problem on my own and figured I'd  share as I have just spent the last 4 hours trying to trouble shoot all  of Apple's problems...following everyone's tips...nothing worked until I  figured it out on my own.
    I'm running windows 7 and have an Ipod Nano (6th Gen).  Hard  drive crashed on computer.  Replaced HD.  Everything works fine now.   Downloaded iTunes along with all other programs.  Nano wouldn't show up  or sync on iTunes.  Said Device Driver Software was not successfully  installed (some USB problems).  Tried everything.  Finally, I figured it  out.
    Disconnect Nano.  Uninstall iTunes AS WELL AS
    Apple Application Support, Apple Mobile Device Support, and Apple Software Update.  Apple only
    tells you to uninstall iTunes and reinstall..restart computer bla bla  bla.  I said screw it and uninstalled all Apple programs (well, the  listed ones above).  I hooked up my nano to my computer to make sure the  device manager recognized it without anything else plugged in...and it  did.  I unplugged it.  Reinstall iTunes and all three other Apple  programs listed above will also reinstall.  I opened iTunes and plugged  in my nano.  It started with the "installing device driver software" and  I was sure
    it wasn't going to work.  Well, it did work.  My  nano showed up in the upper right bar of iTunes and synced.  Unreal...  I  unplugged my nano and plugged in the wife's.  Once again, "installing  device driver software."  Voila!  Her's showed up and synced too.  I  plugged mine back it to make sure it worked and it did.  I'm done.  It's  working.  Hope these steps work for you as well. 

  • Epson stylus r300 not printing

    After installing a recent Epson printer update through the app store, my printer causes an error log to be sent to Apple each and every time I attempt to print. This adds to my woes in that my Epson perfection 1250 scanner also refuses to work after a recent update. I've tried to update through the app store update facility, but no updates are available. This is getting me down a little as I really like my new 27" imac, but without a printer it's almost useless. What's going on with these updates? Can I restore to earlier drivers? Epson web site suggests no - rather that any update must be installed through the app store. I've also tried repairing permissions which appeared to fix some printer issues according to the log, but didn't solve my problem.
    Thanks

    Step 1
    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.
    Step 2
    If there's no improvement after Step 1, restore the following folder from the last backup you made before the EPSON update:
    /Library/Printers/EPSON
    You may have to reset the printing system for the change to become effective.

  • PSE12: serial number not recognized - duplicate post [was:Construction worker]

    I purchased Adobe Photoshop elements 12 from Best Buy. When I try to load it into my computer. It does not recognize the serial number code it says it's invalid, in your manual. It says if you buy from Best Buy to go to your website to get your number. Unfortunately, your website is not available. Is there any way I can find this out now?

    Duplicate post
    http://forums.adobe.com/thread/1366345

  • Epson Stylus Pro 3800 - reporting an issue

    I have an Epson Stylus Pro 3800 connected via Ethernet which is recognized by Bonjour.
    When I tried to add this printer, the driver was not recognized as I was presented with "Select Driver to Use" for "Print Using".
    I then went to the Epson support page and found Printer Driver v3.5cE which has Mac OS X (v10.5 - 10.5.x) listed. After downloading and installing, I am presented with "EPSON SPro 3800" for "Print Using" but when I "Add" the printer, I get the following error message "An error occurred while trying to add the selected printer. Error: -9672"
    I am testing this out on my Powerbook G4 before I actually install Leopard on my production machine.

    After uninstalling the Epson driver, installing the Epson drivers (1.5GB) from the Optional Install package (which didn't contain the driver for the 3800 but you can't know until after you've installed the optional drivers), and reinstalling the downloaded 3.5cE driver, I was still given the error.
    Bonjour doesn't work, but IP does. By selecting More Printers and then selecting Epson TCP/IP, the printer showed up in the list and I was able to add it to my list of printers without the error. The Supplies button in the Printer Queue window doesn't work but Epson's utility can access the printer and get the ink levels, etc as usual.
    It appears to be a CUPS bug. In the cups/access_log, I noticed the following lines while trying to add the Epson printer:
    localhost - - 27/Oct/2007:16:46:57 +0800 "POST / HTTP/1.1" 200 75 CUPS-Get-Default client-error-not-found
    I have just printed a high-res photo on the printer, a photo I printed using the same printer/sharpening/settings/etc only a week ago. I compared the two photos and there are no discernible differences. My Epson is accessible and working

  • Problem with MacBook Air connecting to Epson Stylus sx600fw wirelessly

    Hi
    I have been trying to set up my new Macbook Air with Epson Stylus sx600fw.  Previously this printer was being used via USB with a PC.  I have set up the printer on macbook via USB, but under the advice of online resources, erased that and began trying to set it up for wifi use.  The printer cannot be found in the Print & Scan section of settings, and when i enter it in manually with IP address, it can find the software to install but gets stuck and says "Unable to verify the printer on your network".  After further research i have tried to Ping the printer, which does not work.  One thing that i notice is that the Subnet Mask is different than the apple default...for the printer it is 255.255.0.0, where for apple it is 255.255.255.0 but i dont know how to change this
    Any advice for where it might be getting stuck or what I can do?
    thanks!!!

    Welcome to the forums @lesleglreglpegl ,
    I have a few suggestions for you that might help with the connection problem you're having with connecting your OJ J4680 to your Mac.
    Here are the steps:
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Re-add the printer (do not use the AirPrint driver)
    Good luck to you, have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Ipod touch not recognized in windows after reset

    I just reset my ipod touch in itunes and now it's not recognizing it. i was updating to 2.2.1 firmware and i never got past the update. it's hung on that screen that has the usb and cd. and windows keeps saying found new hardware and wants a driver. my ipod does not work now. how do i get windows to recognize it so i can finish the update.
    I'm on xp 64 bit. and yes i'm using a hacked version of itunes. but it worked with this update before. i actually had the 2.2.1 firmware on it already but i needed to reset the ipod because i have a dead strip i was hoping a reset would fix. now nothing works.

    I uninstalled iTunes, rebooted, and reinstalled.  Now, the iPod is being recognized by iTunes.  Hopefully, it will remain recognized the next time I reboot Windows.  I'd hate to have to uninstall/reinstall each time.
    But, I'm using a beta operating system, and knew the ramafications when I installed it.  So, whatever happens, happens.  Thank you for responding.   Jd

  • CD stuck in combo drive – not mounted / not recognized, so cannot eject

    A CD which had been recognized and could be played in iTunes was in the combo drive when I rebooted. After reboot the CD was not recognized/mounted, and was not visible in Finder, iTunes, or DiskUtility (therefore, it cannot be ejected).
    I rebooted with the mouse button held down but nothing happened. Then I did drutil eject, trying it a few times in succession, but nothing happened.
    At no time after the original reboot has there been the slightest clicking or whirring noise from the combo drive. Evidently the system 'thinks' the combo drive has no disk inside it.
    I haven't tried to go into single-user mode to try to eject it from there. (Incidentally, I have conflicting methods on how to enter single-user mode – is it cmd-s or cmd-opt-o-f ?) Before I try that, my question is that given that I know a good CD is inside the combo drive, is there any command (in Terminal) that would make the system force it to mount?
    Thanks for any info.

    HI,
    Before I try that, my question is that given that I know a good CD is inside the combo drive, is there any command (in Terminal) that would make the system force it to mount?
    Try the suggestion here: http://forums.macosxhints.com/archive/index.php/t-4446.html
    To eject the CD. Try launching iTunes, then Quit iTunes then press the Eject key on your keyboard.
    And, instructions here on how to Startup in Single User Mode
    Carolyn

  • Image Capture is not recognizing my Epson Stylus Scanner 2000

    I have an Epson Stylus Scanner 2000 printer that scans, prints, copies and fax. I faithfully used these fetures in my home-based buisness with my G3 until I traded for a Mac Pro. I can print without a glitch, no problems there. How can I scan and fax??? I've been the the Epson website and didn't see my printer on the list of updates and recognized printers for OS 10.x. What can I do??? I need to keep my printer (which is in excellent working condition). Help me to scan and fax please...

    You need Intel or Universal Binary drivers, which it seems Epson doesn't offer. What I use to use for my scanner (and still do actually) is VueScan. But I did end up buying a $79 Canon LiDE 70 eventually.
    http://hamrick.com
    Epson Stylus 2000 is listed there as supported.
    http://www.hamrick.com/vuescan/vuescan.htm#epson
    A lot of older printers are supported by CUPS or GuttenPrint so take a look there (avoid the latest beta driver though).
    http://www.versiontracker.com

Maybe you are looking for