Epson USB Scanner not working properly after 10.44 update

After 10.44 update, my Epson 3490 USB Photo scanner has stopped working properly. Is this just another one of those update issues that seem to be reported at the moment. Will someone at Aplle actually fix thisat some point?

I can't open Epson Scan - it appears in the dock and info bar for about 2 seconds, then quits. I can sometimes open SmartPanel by pushing the scan button on the unit, but then it says "Please install the supported TWAIN driver." Most of the time it appears in the dock and info ba) but doesn't open the window itself. Epson couldn't fix it. It works on a PC, so they said it's a Mac problem.

Similar Messages

Notes are not working properly after 3.0 update, iPod touch

Since the update, my Notes have not worked properly. I had 3 active notes. Two, I've tried to close and can't. One, I can't access. I also can't save a new note, it kicks me out to the home screen if I try to. I also get kicked back to the home screen when I try to access my third active note. Anyone else experience this?

First connect your your device with iTunes.
You can try to delete your backup data for you iPhone/iPod touch. The backups are placed in ~/Library/Application Support/MobileSync/Backup/.
If you can identify the last backup it worded with notes you can delete all your later backup. Then it should work again.
Or you can find the backup data for notes in the *.mdinfo and *.mddata file. The application identifier should be something like com.apple.notes. Just search for that string in each *.mdinfo file. Than delete these files.
In iTunes right-click (or Control-click) the device, and choose Restore from Backup. Then everything should work fine again.

Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
Related information....
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Find My Friends Not Working Properly after iOS 7 Update

Following update to iOS7, the Find My Friends app doesn't seem to work properly anymore. In particular, when the app is on, or running in the background (i.e. you can see it when you double tap the home button) everything is fine and my friends can see my location. When the app is killed, i.e. off or not running in the background, then my friends cannot see where I am.
That was not the case with the old iOS where regardless of the app running in background or not, my friends could still see my location. Has this happened to anyone? Does anyone have a solution?
Thank you!

Appreciate that, but it's not as useful now. Many users have the same issue, also see
https://discussions.apple.com/message/23105624#23105624

Note not working properly after iOS 7 update,

After installazione of iOS 7 and following, Note never worked more, I see just for half second that it is updated from other devices but any chance to use it again, it appear and disappear immediately, somebody can give me some advise pls?

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

Gps not working properly after 3.0 update

I have an unlcoked iPhone with version 3.0. Before I installed the update to the new version my gps worked great. It was very accurate and would follow along when traveling. Ever since I applied the update the gps is way off by 20-30 miles and it will no longer follow while traveling. Was just curious as to if anyone else is experiencing the same issues or if a update or fix was possible. Thanks for the help

First connect your your device with iTunes.
You can try to delete your backup data for you iPhone/iPod touch. The backups are placed in ~/Library/Application Support/MobileSync/Backup/.
If you can identify the last backup it worded with notes you can delete all your later backup. Then it should work again.
Or you can find the backup data for notes in the *.mdinfo and *.mddata file. The application identifier should be something like com.apple.notes. Just search for that string in each *.mdinfo file. Than delete these files.
In iTunes right-click (or Control-click) the device, and choose Restore from Backup. Then everything should work fine again.

IPAD Speakers not working properly after iOS 7 update

Hi all... After updating iOS 7 my iPAD speakers are producing an horrible noise whenever I listen to music and while using skype it's really intolerable.. Can anyone help me to get rid of this?? Even while hearing songs through headset its producing d same noise.

Quite frustrating
Sounds are either non existent, or sound like they're going through a distortion pedal.
Tried a hard reset, and will likely attempt a clean install/restore next...
Ugh... Apple...!!!
Ipad 2, iOS 7.0.2

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Asha 501 : Whatsapp not working properly after 14....

Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?

Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

TS1398 My wi-fi does not work properly now I have updated my iPhone 4 can any one help

My wifi does not work properly now I have updated my iPhone 4 to the iOS 6 operating system can someone please help me? Also on my maps I can not zoom in as image is so distorted

Make sure your ring/silent switch on the side of the phone is not On (red dot showing).

Touchpad not working properly after changing LCD and invertor

Product - HP Pavilion DV4 1318TU
I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
Thanks

Hey @ashfaque91 ,
Welcome to the HP Forums!
I understand the touchpad and mouse are not working on your notebook after having your display serviced.
It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain.
Was this service provided by an HP service provider or was it done by an independent provider?
Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Epson USB Scanner not working properly after 10.44 update

Similar Messages

Maybe you are looking for