Epson won't print after firmware update

Epson 400 printer worked fine on Airport from Mac 10.6.8 until an Airport firmware update to 5.6.1.   Can print from printer utility -- but not from any software.  Printer does get the message. Then pauses and when questioned returns "empty print file."  Printer has wifi access okay.  Have reset printer to no avail.   I have sharing selected.  But as in one of the other answers -- do not have a computer 'named'.   Needless to say, I do NOT appreciate Apple updates that ruin connections and make complicated restarts necessary.

Heads up all -- after reading assorted similar chats -- I went to the Epson printer's webpage via Printer Utilities and selected Update Firmware -- it did connect with Epson, updated and I was able to print a Word file.  Guess I should have tried that first.

Similar Messages

  • MacBook Pro Won't Boot after Firmware Update

    So I just upgraded to a MacBook Pro which came in the mail yesterday. I removed the Apple-installed HD and swapped it out for a bigger, faster HD. I installed OS X from scratch, imported everything from my Time Machine backup during the Setup Assistant, and then started installing updates. Everything was running swimmingly until the last updates.
    What happened is when I rebooted my MacBook Pro and logged in after a series of updates, I got presented with both a Bluetooth update and a Firmware update at the same time. Both required a restart so I thought I would kill two birds with one stone. I installed the Bluetooth update, and then when it asked to reset I installed the Firmware update instead. However, the firmware update didn't behave as advertised because instead of shutting the MacBook Pro completely down, it restarted and then started installing the firmware update.
    Ever since the firmware update (which I think installed correctly but don't know how to verify), I cannot boot my MacBook Pro. Using the OS X install DVD I can view my firmware version using System Profiler, and the number it is reporting is MBP53.00A.B03.
    I have tried booting in verbose mode to try and get a feel for the problem, and it eventually hangs on an infinite loop saying something about not being able to find something on disk0s2.
    I also thought I would fix the problem by doing an Archive and Install, but it quit at the very beginning of installing with the error "unknown error".
    Also I thought I would format the disk with Disk Utility and then try installing again, but Disk Utility reports that it in unable to unmount the volume.
    Any help you can provide would be greatly appreciated. Thanks!
    -- Update --
    Remember how I'm unable to unmount the drive? I force unmounted it and then used Disk Utility to repair the volume, but still no luck.
    I think the key to the problem is this new HD I put in runs at 3 Gbps. I think I read somewhere that the new MacBook Pro's don't support that.
    I think next I should try swapping out the new HD in my MacBook Pro with the one it originally came with. What do you think?

    I, too, have a brand new MBP 15" that I put an Intel X25 in. At the 1.5 (Prior to Firmware Update) setting, it worked fine. I rant the Firmware Update, all looked fine, but the drive is no longer able to be seen.
    Flash the PRAM, per other suggestions to no avail. Boot off of the DVD and disk utility nor Profiler sees the drive.
    Replace the drive with the stock that came with the MBP (which I had never even used) and it works.
    Put the Intel X25 into a Windows machine and it works fine. Reformatted it (in windows) and put it back into my MBP. Still not able to see it (from the Disk utility after booting off the DVD).
    Intel's firmware for the drive says its up-to-date (new drive) and if I attempt to "re-run" the Mac Firmware Update, it says that the machine is already up-to-date.
    Seems odd that it worked before an now it doesn't. Also seems odd that the X25 works in other machines. And that my MBP works just fine with the stock Hitachi 7200 320GB drive.
    Ideas? Intel says to call Apple Support. Not sure what I can say to them.

  • Finder won't launch after Firmware Update

    I ran the firmware update for my MBP (MBP31.0070.B07). Now, my finder will not automatically launch upon restart/login. I can click on the Finder icon in the dock and launch the finder, but it won't do so on its own.

    Weird...
    Go into /Applications/Utilities/Console.app. Click on "Console Messages" on the left side. Is there anything specifically mentioning the Finder in the text that appears on the right side from around the time you logged in? Then check LOG FILES->~/Library/Logs/CrashReporter. Are there any crash logs listed with Finder in the name? If so, copy/paste the bottom one into a reply and post it up. With that info we might be able to figure out what is going on with your machine... Good luck...

  • HT6114 my printer won't print after last update it is a mac mini update osx10.9.2

    help   my lexmark series 5600 wont print after the last update to my mac mini
    can anybody help

    Try here >  OS X: Printer and scanner software available for download

  • MacBookPro won't boot after firmware update; superdrive spins forever

    I got my brother to switch to mac recently, but his MacBookPro has stopped booting. He told me that he ran a software update, in fact he said specifically "firmware update" on his CoreDuo MacBookPro, and as a result the machine does not boot. Instead it struggles to power on when the power button is pushed, and nothing happens except for a spinning up of the superdrive. It continues on like this until he holds the power button down again, stopping the spin.
    As he put it, he ran a "firmware update" (sounds strange to me) and was told to restart, so he clicked restart. He was later instructed to do a hard restart, holding down the power key. He did so and has since fallen into the spinning drive problem, with no hints as to any cause.
    Does anyone recognize this, and could someone please suggest solutions for trouble shooting? Thanks in advance. OS 10.4.x

    This sounds like he got a kernel panic, as my FAQ* explains:
    http://www.macmaps.com/kernelpanic.html
    * links to my FAQ may generate me some compensation.

  • HELP Boot Camp won't start after firmware update

    Hi Guys,
    I just bought a XP CD and installed 10.4.6 and the latest firmware update for my XP installation. So I downloaded Boot Camp, and when I go to the assistant in utilities a window pops up and it says "You must update your computers firmware to use this assistant"
    So when I check MacBook Pro SMC Firmware update also in utilities it confirms I have the latest firmware 1.0.
    I have repaired permissions and still nada...
    Can anyone determine what is wrong? Any help would be greatly appreciated
    Thanks
    Pete

    i think the SMC update != overall system firmware. did you update ur machine to firmware version 1.01? heres a link http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html

  • 8500A Plus Won't print after idle 20 mins

    Windows 7, 64 bit, no service pack yet. Tried updating firmware, but by computer grays out the printer option.  This is my THIRD printer from HP (exact same model) that has had the exact same issue.  Must be a software issue, but can't find it.  Printer won't print after idle for 20 mins.  Goes into printer que, but doesn't complete.  Issue started Jan 2, no big changes to computer at time.  Has anyone had this issue that can help?  I'm about ready to go buy a Brother.  Thanks

    The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02790693&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • ITunes won't open after OS update to Yosmite

    ITunes won't open after OS update, ITunes has been updated, it won't open or bounce. It will not allow me to move it to trash or reinstall it. I have already updated to OS X Yosmite two times as directed by apple, I have rebooted in safe made as well as Command/Option/P/R before start up. I have opened console/system log to see if there is anything going on but when I click on Itunes nothing happens, not even so much as half a line of script. I'm stumped. If I wanted someone to tell me to turn it off and on again I'd just watch IT Crowd. please help

    Thank you for using the Apple Support Communities
    If you head into your applications folder and locate iTunes. Right click iTunes and show package contents. In there there will be a contents folder --> MacOS --> double click on the iTunes terminal icon. This should force iTunes to open via a terminal window and at the very least it will tell you what it is getting stuck on.

  • Data recovery after firmware update

    Hi guys,
    does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
    thx.

    if you didn't backup them, there is no way to recover them
    Greece Nokia X6 RM-559 v40.0.002

  • My iTunes won't open after last update.

    My iTunes won't open after last update. Can anybody help me?

    I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
    https://discussions.apple.com/thread/3800524
    Oliver

  • Fire fox won't open after installing update. But it shows in my task manager as running

    Firefox won't open after installing update 3.6.6 Solution page says problem has been solved, but the solution has been removed.
    == This happened ==
    Every time Firefox opened
    == After installing update 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Hello Chris.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start

  • Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

    Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

    This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
    http://support.mozilla.com/en-US/questions/880170

  • Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

    Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • IPhoto won't open after iLife update

    iPhoto won't open after iLife update.  How get iPhoto to funtion again?

    What version of iPhoto? What happens when you try?
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

Maybe you are looking for