Epson Workforce 630 - no settings?

I just bought an Epson 630 workforce today and installed the latest drivers but for the life of me I can't find any settings for quality or paper type. The only preset is default and last used. How do I create a preset? I feel like I'm missing something simple.

In the Print dialogue box just to the right of the printer name is small blue box with an arrow pointing downward. Click on that box so the arrow points upward. Voila!

Similar Messages

Two-sided printing with Epson Workforce 630

I bought a new iMac a few months ago and got the Epson WorkForce 630 printer at the same time. However, I can't figure out how to do duplex (two-sided) printing. I've searched around, and it looks like this feature may not be supported for the Mac. Now, why would Apple sell a printer through their website that doesn't support Mac? This seems like a basic feature that all printers should have.
Does anyone know a work-around? The "two-sided" selection is grayed out for me.
Thanks!

Thanks! Unfortunately, on the Epson site, it says, "
Q:
Is manual duplex (double-sided) printing supported in Mac OS X with my product?
A:
No. This feature is supported in Windows only."
I really don't know why Apple would sell a printer through their stores that doesn't support all features in their OS. I might end up going back to my older printer.

[SOLVED] iscan Plugin for EPSON WorkForce 630?

Hello again Arch Forums!
I'm trying to set up my scanner with sane and iscan using the Arch Wiki page.
Upon installing iscan (required for EPSON hardware) I noticed there is no appropriate plugin for my all-in-one scanner, the EPSON WorkForce 630, in the AUR.
Which driver do I install now?
Last edited by SwitchDhole (2015-02-20 15:42:05)

I think it may be that your scanner would be included in the AUR package iscan (local) or iscan-plugin-network.
If you look on the Epson site for the drivers corresponding to the iscan and iscan-network-plugin packages it seems that the Workforce 630 is among the scanners supported.
Regards,

I just downloaded Java for OS X 2014-001 and my Epson Workforce 630 printer is not recognized? Any thoughts?

I just downloaded Java for OS X 2014-001 and my printer is not recognized. I use an Epson Workforce 630. Has anyone had similar problems?

Hi there wildwatercolors,
I would recommend taking a look at the printer troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

Since auto download of an update to y Epson Workforce 630, I can't scan

My Mini downloaded the update for the Epson workforce 630 2 nights ago. The Mac no longer recognizes the scanner. I can print and copy from the Mini but no scanning. I get a comm error saying the scanner is not connected. When I try to use image capture, the mini can't find the scanner. Where can I go to repeat the download. I am on OS 10.9.4

My Epson's work normally after the latest > Epson Printer Drivers v2.18 for OS X Update.
I would also do the 10.9.4 Combo Update as suggested by IIIaass.
Then if that does not solve your problem, go to the > Epson Support Site and follow the instructions for downloading the ICA Scanner Driver for Image Capture.

HT4356 Can I print from my ipad3 to an Epson workforce 630?

Can I print from my ipad3 to an Epson workforce 630?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I don't see that printer in the list of AirPrint printers;
http://support.apple.com/kb/HT4356
You can install AirPrint on a PC or activate AirPrint on a Mac and print to this printer attached to your computer by USB.
Activate AirPrint on a Mac;
http://netputing.com/airprintactivator/
Install AirPrint on a PC;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

EPSON Workforce 630 Setup Problem

Hello,
I recently purchased the EPSON Workforce 630 when I ordered my MacBook Pro. I am having troubles connecting my laptop to the printer over wireless. I get to a certain step in the process where I click on "Add Printer". Then, a screen on the side pops up and says to click "Add" in the screen to the left. But, there is no other screen to the left that gives me the option to "Add". I am confused and have tried everything I can think of. If anyone can help me, I would greatly appreciate it!!
Thanks!!!

I'm having the same problem with my new Epson 630 and Macbook5.1/OS 10.6.8
I had no problem connecting to my mom's Epson 630, but can't add my printer to the printer list.
Do you get a message saying System/Library/Extension/IomegaSam.Kext missing?
Have you found a fix? Sure would appreciate knowing what to do next.

Wireless printing epson workforce 630

Can I print wirelessly from my iPad to an epson workforce 630? Two seemingly relevant apps don't seem to do the trick.

there are 4 ways of printing
1. the printer support airprint
2. the printer maker have an app which you use to print with this is how I print and scan from my samsung printer
3. 3th party apps which support a wide range of printers look in app store
4. installing the program netgear genie on your computer that will let your ios device see the printers connected to your computer as airprint supporting printers but of cause only when the computer is turned on

Please Help! All of a sudden my Epson workforce 630 won't print. I have combed the previous discussions and tried the suggestions; still not printing. I get an error message that says'"Stopped, Filter failed"

HI,
I have combed previous discussions and tried the suggestions. I am running OS X 10.9.2. My Epson software is current( I just re downloaded all the drivers etc.) I uninstalled and reinstalled my printer. I opened sharing and there is a name there. My hardware has this message if this helps:
rastertoescpII:
Path: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/ MacOS/rastertoescpII. I have turned off, unplugged, waited... nothing. I am able to do a test print and all is fine. Epson only assists via email and I have to wait 24hrs. I'm reaching out here; been banging my head against the wall since 7am today. I really need to get back to work, sigh. Any assistance is greatly appreciated.
Kristin

I was contacted by Epson support, all resolved. There were so many steps we did to resolve this; I'm unable to remember them all to share here.

Scanning with Adobe Acrobat Pro X using a Espon Workforce 630

I have a Mac Pro with Lion OS and a epson workforce 630 both working fine. But Adobe CS6 -Acrobat Pro X does not see the scanner. I can print without problems, just can't see scanner. I've downloaded the latest epson drivers. Adobe doesn't show anything.

I have a Mac Pro with Lion OS and a epson workforce 630 both working fine. But Adobe CS6 -Acrobat Pro X does not see the scanner. I can print without problems, just can't see scanner. I've downloaded the latest epson drivers. Adobe doesn't show anything.

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
Do one of the following:
USB
Connect your product to your Mac using a USB cable and make sure the product is turned on.
Wireless
Connect your product to your router wirelessly and make sure the product is turned on.
Note: You'll need to use the product's control panel to establish the connection to your router.
Ethernet
Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
Select the menu on your Mac, then Software Update.
Do one of the following:
If you see an update from Epson, select UPDATE to install it.
Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
For more information on scanning in OS X, see our Image Capture FAQ.

EPSON Workforce 310 "scanner reported an error" when using document feeder

I'm having trouble using my EPSON Workforce 310 printer/scanner with my new MacBook Pro (late 2012, 2.5 GHz i5, OS X Mountain Lion 10.8.2).
Using the flatbed I can scan without a problem. But when I try to use the document feeder, I get the following error right after I click Scan and before the scanner has done anything (at least I don't hear anything moving inside the EPSON):
Scanner reported an error
An error occured during scanning
The EPSON's display doesn't show any error or special message.
This is repeated whether I use Image Capture, Preview's Import from Scanner, or the printer's native app (PrinterProxy, the one that shows up in the doc whenever the printer is printing or scanning).
I have no problem doing the scanning from my old iMac (2006, 2GHz Core Duo, Snow Leopard). After scanning to the MacBook fails I can walk over to the iMac and scan from there without problem and without resetting anything on the EPSON.
The EPSON is connected the home network via ethernet to a Time Capsule. Both computers are connected to the network via WiFi.

Syd,
My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do.

How do I print in draft mode on Epson Workforce 3540

I just bought and set up an Epson Workforce all in one printer. Everything is working fine, except that I can't get it to print in draft mode.
I've tried a few different applications and all are the same. When I go to print, I get a window that includes a print quality slider at the bottom that includes three settings: draft, normal, and best. The word "draft" is grayed-out. If I try to drag the slider to it, it snaps back to normal in the middle.
I looked in the printer's manual, and it says draft mode can only be selected with "plain paper" selected. But, even when I have plain paper selected, I cannot choose draft quality. In fact, it seems no matter what I try I cannot choose draft quality.
The printer's owner's manual, it also shows some printer dialog windows that I don't get (I think I did get them with the Epson I just replaced, though).
Can anyone tell me how I can select draft print quality, and why I'm having so many problems doing so? Maybe it's to be expected that the Epson isn't letting me select the print mode quality that would save me the most ink.
I'm attaching a screen capture of what I see when I try to print. It is the first image.
I'm also attaching a couple of screen captures from the printer's owner's manual section on Mac printing. These are the printer dialog windows I don't see when I try to print.
What I see when I try to print (note that "Draft" is grayed-out on the quality slider):
These are what the printer's manual seems to suggest I should see (and what I think I did see with my last Epson printer that I just replaced):
And:

Based on your screen captures I believe you may have selected Apple's AirPrint driver rather than the Epson driver. This can happen if you add the printer by selecting it from the small pop-up window that appears with a heading of Nearby Printers after you click the plus button in the Print & Scan preference pane.
To confirm which printer driver you are using, open the Print & Scan preference pane and select the Epson in the Printers colum. The right pane will give some details about the printer. If there is mention of AirPrint in the printer Name or Kind, then this will be the issue. The fix would be to remove this printer from Print & Scan and add again. But this time, don't select the Epson from the Nearby Printers pop-up. Instead, click on Add Printer Or Scanner from this pop-up window and from the next Default Add printer window, select the Epson in the list and ensure you select the Epson driver in the Use menu rather than the AirPrint driver.

Printing problem with Epson Workforce 840 & iPhoto 6

My iPhoto 6 works fine with our other printer - HP Officejet.
However, when I try to print a 4x6 photo with the Epson Workforce 840, the "iPhoto" tab in the print settings doesn't offer the usual set of paper options. It only offers a limited set including Letter, A4, and a bunch of weird papers called: EPKG; EP8x10in; EPHiVision102x180; EPPhotoPaperLRoll; etc. No, there's no "EP4x6".
I choose 4x6 in page setup, but that doesn't help. I've downloaded and installed the Epson drivers and rebooted.
Help!

I have an Epson R320 and have communication problems.You start the job and after about 5 seconds you get a ! in the dock on the printer icon and on opening you see "job stopped".
I am no expert but it seems to me that the program e.g.MYOB accounting fails to pass the data to OSX.
If I de install and reinstall the epson drivers and repair permission it will work ...but then the next day on re-booting we are back to the same state of not working.
I have informed Epson and am waiting for a reply. The epson printer tests and standalone mode works. OSX problem?

Epson Workforce 845 will not print after IPad software upgraded

All worked well before I upgraded my Ipad2 software yesterday. No longer prints. Message when I press print says it is searching for an AirPrint printed, and finds none on my network. Nothing has changed except the software upgrade. hat must I do?

Thanks...other computers on the wireless network continue to work well. The Epson Workforce 845 is an approved printer on AirPrint. Trying to find a printer setup screen on the iPad without success. When I bought the new wireless printer, it worked right out of the box with the iPad.
I am tempted to restore the software to the original factory settings through iTunes but fear losing everything that has been added since I got it. A disclaimer on iTunes says I can back all up, and later reinstall after I reset to original factory settings, but I am skeptical. Any experience in this area?

Epson Workforce 630 - no settings?

Similar Messages

Maybe you are looking for