Epson Workforce 845 will not print after IPad software upgraded

All worked well before I upgraded my Ipad2 software yesterday. No longer prints. Message when I press print says it is searching for an AirPrint printed, and finds none on my network. Nothing has changed except the software upgrade. hat must I do?

Thanks...other computers on the wireless network continue to work well. The Epson Workforce 845 is an approved printer on AirPrint. Trying to find a printer setup screen on the iPad without success. When I bought the new wireless printer, it worked right out of the box with the iPad.
I am tempted to restore the software to the original factory settings through iTunes but fear losing everything that has been added since I got it. A disclaimer on iTunes says I can back all up, and later reinstall after I reset to original factory settings, but I am skeptical. Any experience in this area?

Similar Messages

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

B210a will not print after changing router\modem

b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

Good morning,
Please use the second section of the following article to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Have a Canon MX860 and the magenta will not print after several deep cleanings

Have a Canon MX860 and the magenta will not print after several deep cleanings

Hello allenaeifert.
Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error Code 150:30 Photoshop Will Not Open after System Software crash

Error Code 150:30 Photoshop Will Not Open after System Software crash

if mac os,Error "Licensing has stopped working" | Mac OS

Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

Iphoto will not print since I've upgraded to Lion. It is looking for themes. It would appear the themes are now missing how do I get them back?

Thank you, yes this solved my problem...

Epson rx680 will not print after apple update print driver

I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

https://discussions.apple.com/thread/5233149

Epson workforce 845 suddenly not working wirelessly, help!

I've had an iMac for three yrs., also bought an Epson Workforce 845 at the same time. Both have worked seamlessly. I believe that after the most recent automatic computer update, is when my printer stopped working wirelessly. I can print from my iPad and iPhone, but not from my iMac. I've been on the phone with Epson three times, they can't figure it out. My husband's mac mini won't print now either. Any suggestions as to what I can do to get my printer to print wirelessly again???? HELP!! So frustrated.

Try a reset > Mac OS X: How to reset the printing system

My epson WF-3540 will not print.

After updating to Yosemite. My Epson will not print.,even with the the epson 2.19 driver update.
None of My devices can find my printer. It only works with USB plug directly to my iMac. .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
I've reinstalled software.
Unplugged and reconnected cables.
Print out from printer says everything passes ,network is good, but epson connect is disabled ?
What can I do next?
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: I
Processor Speed: 2.8
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM7
SMC Version (syste
Model Name: iMac
Model Identifier: iMac7,1
Processor Na

Network Printer Troubleshooting
If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Printer Troubleshooting - Yosemite
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Epson xp-312 will not print wireless with 10.9

i am new to the mac so i got a epson xp-312 from our local shop and installed the driver what is the lastest from epson but it will not work wireless and will not find the printer. I have gone to network settings and you can trace it and it will come back saying that the ip address belongs to the epson but when you ping it it comes back 100% fail you can print from a windows pc wireless with no problem please help the driver i have tried is 2.15.1 dated 11th sept 2013 thank you in advance for any help

alamondo wrote:
i have a ipad and a iphone and they both can not find the printer ...
I am assuming (hoping!) you mean you have installed the Epson iPrint app on one or both of your iPad and/or iPhone, and Epson iPrint does not detect the printer.
If that's true, then Mavericks is definitely not the problem! Neither the iPhone nor iPad (nor Epson iPrint) rely on Mavericks.
Hunt for your printer using Epson iPrint. Make sure your pinter is on, tap "Scan", then tap the gear-like icon in iPrint to hunt for it.

HT4356 Epson Artisan 837 will not print from IPhone

I have an IPhone 5 and an Epson Artisan 837 printer. When I attempt to print from my Ihone 5 I always receive an error message:
"out of paper, paper jammed, or incorrect paper size".
In reality,it is none of these things. I can print from my IPhone 5 to my Brother printer via the router connected to my computer, but the Epson is via WiFi/AirPrint.
Someone tried printing from their IPhone 5 to my Epson and it worked perfectly, but it WILL NOT PRINT FROM MY IPHONE 5.

Try GutenPrint:
Click here to begin autodownload: http://tinyurl.com/8ctlaw.
You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
Click here to begin autodownload: http://tinyurl.com/9mgm38.
Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
Here's a link to Foomatic-RIP:
Click here to begin autodownload: http://tinyurl.com/4ep5dv.
Finally here's a link to HPIJS:
Click here to begin autodownload: http://tinyurl.com/ayhp9z.
You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
<Edited by Moderator>

HP Officejet Pro 8500 Wireless (Vista x64) Will not print after Sleep Mode

Hello,
As the title says the printer does not print after coming back from sleep mode. Before entering sleep mode the printer works fine and is responsive. After coming back from sleep mode the printer is still responsive (buttons on the touch screen can be pressed) but unfortunately does not accept any print jobs. Currently, I restart the printer to get it to print. It is connected wirelessly through WRT610N Linksys Router. Any suggestions or solutions would be greatly appreciated.
-Artem Durytskyy

I have been having the same problem all during my warranty period. But no one ever told me it was a firmware problem until two days ago connected to the sleep mode for the wireless one. Supposedly, they have downloads for wire ones now online which I found for 909a and 909b, but not 909g which is wireless. Now I am out of warranty and they won't replace it. I have a long history with tech support since early 2010. Right now, they are sending me a power adapter to try, said to turn off sleep mode (which I dont' know how). Then I told them I found online a firmware download, Apr 2010 to update firmware. My current version is different that the one listed for the download. So, I'm going back to TS to have them fool with it. Has anything worked for you?
Officejet Pro 8500 Wireless, A909g. It's been a problem from the beginning

My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC. The error box says:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
Any suggestions?

Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having cartridge and printhead problems. I would like to try and assist.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Epson Workforce 845 will not print after IPad software upgraded

Similar Messages

Maybe you are looking for