Epson Workforce Pro wf-4630 will not connect.

I just purchased the Epson all-in-one and am trying to connect wirelessly.  I downloaded the drivers and updated them....and I downloaded the Epson drivers from Apple.  No luck. 
The computer does "see" the Epson fax. 
When attempting to add "IP" it does say valid and complete host name or address.  The Use: EPSON WF-4630 Series indicates properly but when I click "add"...I get "Unable to verify the printer on your network".
Thank you in advance.
~Dave

Dabakeman wrote:
The computer does "see" the Epson fax. 
This is a good start, It indicates that the Mac and Epson are on the same IP subnet. Next to the entry of Epson fax, does it show Bonjour or something similar? If so, then this shows that the fax component uses Bonjour to advertise itself but the printer component could use a different protocol. Have you checked any supporting documentation? Is the printer component meant to be visible in the same manner?
Dabakeman wrote:
When attempting to add "IP" it does say valid and complete host name or address.  The Use: EPSON WF-4630 Series indicates properly but when I click "add"...I get "Unable to verify the printer on your network".
Some printer drivers don't work when creating the printer this way. If the Epson driver does support this type of connection, then you may need to select an alternate IP protocol. By default, IPP is the default protocol set when creating an IP printer. If you remove this printer and try again, this time selecting HP Jetdirect-Socket for the protocol, you may have more success.

Similar Messages

  • I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    I have a HP wireless printer, and im trying to connected to my macbook pro. But will not connect..

    Isaaura - what printer model do you use?
    While opening Safari click the Bookmarks icon and select Bonjour.. can you see the printer listed there?
    (If Bonjour is not listed click Safari > Preferences > Bookmarks and check Bonjour within the Collections section)
    Can you access the printer by typing its IP from Safari?
    If the printer not available only thoguh Bonjour but an be reached by its IP, what router brand and model are you using?
    Templeton Peck - correct me if I'm wrong, the different OS X forums have a dedicated forum for printing and scanning.. as Apple no longer produce printers about the last 2 decades I would assume those forums meant to deal with other manufactures over OS X..
    john galt - Am I spelling OS X correctly?

  • I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

    I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

    Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

  • Epson Workforce 325 scanner app will not work.

    Recently downloaded Maverick X and now my Epson Workforce 325 scanner app will not work. I have checked for updates through Epson and they say its an Apple problem, but there is none available through Apple. 
    Do I have to go back to the old Mountain Lion 10.8.5 v software?

    You will have no alternative but to wait for Epson to update their drivers to be compatible w/Mavarick.  Why not call them (tech support) or send them an email? 

  • Macbook Pro 10.6+ will not connect to wifi network

    Having a strange issue with one particular Macbook Pro not being able to connect to the internal wifi. There are 5 machines, mix of Windows and OS X, none have this issue. We have a wireless network coming from a SonicWall router with wireless capability. This particular Macbook will not connect to the wifi. Just an "!" symbol around the wifi. It has no issues connecting to any other wifi in the area, even to a second on within the same floor.
    What are steps to troubleshoot? I am an advanced Windows user and would check ipconfigs, flushdns, among plethora of other things. I am not so sure about what to do in OS X (10.6 or 10.7, not sure).
    Any guidance would be appreciated.

    I can assure you it is not the router. I am pretty good with Windows and Networking, particularly these model routers. This is an issue on the laptop. I feel as if it keeps remembering old credentials to this wifi network (when user kept typing the wrong password). Once I changed the WiFi password, it no longer even asks me to update the WiFi password when attempting to connect. I have to manually try to connect to it by inputting SSID and password and still does not accept.

  • Officejet 4630 will not connect to computer to scan.

    When I first got the product it scanned a few times but now will not connect to my computer to scan even after re-downloading drivers and entering a printer claim code.

    I would recommend using the HP Print and Scan Doctor to help diagnose and resolve your connection issue.
    Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Hp officejet pro 8600 premium will not connect to network

    I have a HP printer that will not connect to  my home network unless I disable WPA2
    security. Any suggestions?
    Thanks

    Hi,
    Have you tried WEP or WPA, I know few printers do not support WPA2. Manual for the 8600 printer does not say anything about WPA2 and we expect it should work with WPA2 but you may want to run a test with WPA only (if your wireless router had this ontion) to confirm this.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Keith Gilabert "HP Laserjet Pro 200 MFP will not connect wirelessly"

    Hi.
    Laserjet HP Pro 200 will not allow me to have a wireless connection direct to the printer when I have the network cable plugged in. 
    Please advise.
    Thank you,
    Keith Gilabert
    Keith Gilabert

    Hello @KeithGilabert
    You may only use the network cable (Ethernet) or Wireless as the connection to your computer(s). Both of the connections together cannot co-exist, unlike USB and Wireless, which is possible.
    Installing the Printer Software on a Wireless or Wired (Ethernet) Network
    Wishing you a wonderful Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Just got the mac pro and mouse will not connect.

    I've googled the heck out of it and can't find anything wrong.  At this point I don't know what else to say but, the mouse isn't working. Checked batteries, went through ALL processes, and nothing seems to work.  All I get it the green status light blinking or it will say it's connected for 30 secs but doesn't do anything. If anyone else has any other help or info I would appreciate it.

    Sprad05 wrote:
    If anyone else has any other help or info I would appreciate it.
    How far is you mouse from the back of your mac pro and is there anything between those two points?  Beyond about 3 to 4 feet the MM on a mac pro for many people is problematic.  Here's a 24-page thread on this topic:
    Poor Bluetooth reception and jerky mouse
    Bottom line, use a bluetooth dongle (that what I use -- IOGear GBU421) or wire up an external antenna to the bluetooth card inside your mac pro.
    As an experiment you could try doing a smc and pram reset and keep the mouse close to the back of your machine and seeing if it pairs up and stays connected.

  • Officejet 4630 will not connect to wifi

    Bought this printer a few months ago, set it up, no problems.  Now all of a sudden, it will connect to wifi.  Nothing with wifi has changed.  Printer finds wifi, I enter the password, and it thinks for a while, then says "Connection Failed, Cannot connect to network".  When I print the report, the only thing that fails is in settings "no filtering".  Tells me the solution is to add the mac address but doesn't tell me how to do that.  When I scroll through the settings, it looks like the mac address is there.
    This question was solved.
    View Solution.

    Power off printer and router. Power on router and wait 3 mins. Power on printer and verify it connects to the router. Do you have a valid IP address??
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My macbook pro and iphone will not connect to the internet

    For three days my macbook and Iiphone have not been able to connect to the internet.The macbook says the wifi is connected with a green light, but when I open google chrome and attempt to go on any website it says "This webpage is not available." I have tried everything including restarting the computer, restarting the router/modem and deleting/re-adding wifi to the networks list. the iphone says that the internet is connected but when I go to use an app like FAcebook it says that there is a network error. I have even called our service provider about this. The imac in our home has no problem connecting to the internet. Any ideas on what is going on?

    Run the Network Diagnostics assistant. How far do you get?

  • Everytime I come home from being somewhere else my macbook pro(late 2007) will not connect to my airport express(802.11n)

    Also, my airport utility can never find the airport express either.  It keeps searching and searching.  I've downloaded all the updates, as far as I know...
    Also, my iPhone 5 won't connect either.  And the iPhone 4 I had before wouldn't either!
    Thanks!

    The warranty entitles you to complimentary phone support for the first 90 days of ownership. If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to  exchange or return it for a refund. In other countries, the return policy may be different.

  • Officejet 4630 will not connect to computer through wireless or usb since installing Windows 10

    I have tried to install updated software for said printer but it still refuses to connect to my pc through either of the two mediums provided. Bit unstuck due to this as it is my work computer. Admittedly should have waited a while to install windows 10 but I got a bit caught up in the moment and didn't consider that issues such as this may arise. I also have a HP designjet T120 connected to this PC and that still works wirelessly no problem at all!

    HELP

  • My Macbook Pro will not connect to my Server

    I have a new mac book pro and it will not connect to my mimi server running X Server. My iMac and PCs will connect just not the new mac book...any advice?
    I also have 20 questions about general server operations...help anyone?
    Chuck Montana

    OK - here is the the ifconfig output
    {CODE}
    IFCONFIGLast login: Tue Jan 25 15:41:00 on console
    ChuckandGinas-MacBook-Pro:~ Montana$ IFCONFIG
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    inet6 fd53:ca8e:fb14:7019:cabc:c8ff:fe8a:d874 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether c8:bc:c8:8a:d8:74
    media: autoselect
    status: inactive
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 78:ca:39:b7:bd:76
    inet6 fe80::7aca:39ff:feb7:bd76%en1 prefixlen 64 scopeid 0x5
    inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
    media: autoselect
    status: active
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr 78:ca:39:ff:fe:1f:f1:00
    media: autoselect <full-duplex>
    status: inactive
    utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet6 fe80::cabc:c8ff:fe8a:d874%utun0 prefixlen 64 scopeid 0x7
    inet6 fd00:6587:52d7:c0:cabc:c8ff:fe8a:d874 prefixlen 64
    ChuckandGinas-MacBook-Pro:~ Montana$
    {CODE}
    {CODE}
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether d4:9a:20:fd:bf:b4
    media: autoselect
    status: inactive
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 90:84:0d:f4:e1:06
    inet6 fe80::9284:dff:fef4:e106%en1 prefixlen 64 scopeid 0x5
    inet 192.168.1.103 netmask 0xffffff00 broadcast 192.168.1.255
    media: autoselect
    status: active
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr d4:9a:20:ff:fe:fd:bf:b4
    media: autoselect <full-duplex>
    status: inactive
    mini:~ montanafamily$
    {CODE}

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

Maybe you are looking for