Epson xp 202 will not print with wifi

using os 10.7.3. Can ping printer ok but print box indicates printer off line. Prints ok with usb cable but not with wifi
cheers

Fixed.
Thank you Misery.  As I am juust starting out with Arch I was unaware of PKGBUILD/makepkg system.  You have *greatly* enhanced my Arch experience.
I am, however, still puzzled as to why I got the 'file not found' message from ldd.  I checked dependencies with objdump and installed the one (old)libjpeg it wanted, but ldd still refused to run giving me 'file not found'!

Similar Messages

  • Why will my epson artisan 810 will not print with ipad?

    Why will my epson artisan 810 not print with iPad?

    Because it is not a Airprint enabled printer.
    http://support.apple.com/kb/ht4356

  • My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

    There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC.   The error box says:
    "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
    Any suggestions?

    Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having cartridge and printhead problems.  I would like to try and assist.
    I would suggest performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

    Hello! To anyone who tries to help me, thank you in advance!
    I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
    I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
    None of this seems to be working, suggestions very appreciated!
    Thanks
    MP

    Try Linc's suggestion first.  That should cure your issue.  If not, here's something else to consider:
    PrinterMaccer wrote:
    I installed the software from the site ...
    Apple keeps a set of current software for Epson printers.  You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key).  Then download Apple's software version from here:
    Epson Printer Drivers v2.18 for OS X
    Finally, set up the printer as shown here:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Epson xp-202 will not print "Filter failed"

    I am moving from SuSE to Arch - installed couple of days ago.  My epsonxp202 was working (well) under SuSE with 'drivers' downloaded late November.  The download now gives *different 'drivers', offering .rpm, .deb, dource (.src.rpm).
    Cups finds printer (wirelessly) no probs, but attempting to print gives "Filter failed" message.  Log shows it to be the epson_inkjet_printer_filter supplied which gives the error :
    [Job 15] PID 1469 (/opt/epson-inkjet-printer-201202w/cups/lib/filter/epson_inkjet_printer_filter) stopped with status 102 (No such file or directory)
    file command gives this output
    /opt/epson-inkjet-printer-201202w/cups/lib/filter/epson_inkjet_printer_filter: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.8, not stripped
    And ldd gives
    /usr/bin/ldd: line 116: /opt/epson-inkjet-printer-201202w/cups/lib/filter/epson_inkjet_printer_filter: No such file or directory
    I have tried removing the compiled files and replacing with those extracted from rpm - no deal
    Removed those and extracted everything from .deb, ran the preinst script, untarred the files and ran the postinst.
    As an old (SysV) unix freak I am baffled.  After moving to the .deb version I got a complaint about /usr/share/cups/drivers/pscript5.dll not found - so I obtained this Win crap and stuck it there.  Back to same old problem.
    Other forums suggest that this printer is fine with this set of 'driver' files.
    N.B.  I *did* try copying over everything that the SuSE version appeared to be using without luck.
    Has *anybody* an idea on how to make this printer function under Arch?  Xsane found and used the scanner side without any downloads or other inteervention.

    Fixed.
    Thank you Misery.  As I am juust starting out with Arch I was unaware of PKGBUILD/makepkg system.  You have *greatly* enhanced my Arch experience.
    I am, however, still puzzled as to why I got the 'file not found' message from ldd.  I checked dependencies with objdump and installed the one (old)libjpeg it wanted, but ldd still refused to run giving me 'file not found'!

  • Elements 11 will not print with Epson R2000?

    Cannot make Elements 11 work with new Epson r2000 printer.  Prompt on screen states it is not compatible or settings are not correct.  Epson tech support worked on it, said to contact without success, said to contact Adobe.  Printer works fine on all other applications.  Help please.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Epson xp-312 will not print wireless with 10.9

    i am new to the mac so i got a epson xp-312 from our local shop and installed the driver what is the lastest from epson but it will not work wireless and will not find the printer. I have gone to network settings and you can trace it and it will come back saying that the ip address belongs to the epson but when you ping it it comes back 100% fail you can print from a windows pc wireless with no problem please help the driver i have tried is 2.15.1 dated 11th sept 2013 thank you in advance for any help

    alamondo wrote:
    i have a ipad and a iphone and they both can not find the printer ...
    I am assuming (hoping!) you mean you have installed the Epson iPrint app on one or both of your iPad and/or iPhone, and Epson iPrint does not detect the printer.
    If that's true, then Mavericks is definitely not the problem!  Neither the iPhone nor iPad (nor Epson iPrint) rely on Mavericks.
    Hunt for your printer using Epson iPrint.  Make sure your pinter is on, tap "Scan", then tap the gear-like icon in iPrint to hunt for it.

  • HT4356 Epson Artisan 837 will not print from IPhone

    I have an IPhone 5 and an Epson Artisan 837 printer. When I attempt to print from my Ihone 5 I always receive an error message:
    "out of paper, paper jammed, or incorrect paper size".
    In reality,it is none of these things. I can print from my IPhone 5 to my Brother printer via the router connected to my computer, but the Epson is via WiFi/AirPrint.
    Someone tried printing from their IPhone 5 to my Epson and it worked perfectly, but it WILL NOT PRINT FROM MY IPHONE 5.

    Try GutenPrint:
    Click here to begin autodownload: http://tinyurl.com/8ctlaw.
    You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
    Click here to begin autodownload: http://tinyurl.com/9mgm38.
    Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
    Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
    Here's a link to Foomatic-RIP:
    Click here to begin autodownload: http://tinyurl.com/4ep5dv.
    Finally here's a link to HPIJS:
    Click here to begin autodownload: http://tinyurl.com/ayhp9z.
    You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
    <Edited by Moderator>

  • My epson WF-3540  will not print.

    After updating to  Yosemite. My Epson will not print.,even  with the  the epson  2.19 driver update. 
    None of My devices can find my printer. It  only works with USB plug directly to my iMac.  .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
    I've reinstalled software.
    Unplugged  and reconnected  cables.
    Print out from printer says everything  passes ,network  is good, but epson connect is disabled ?
    What can I do next?
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Name: I
      Processor Speed: 2.8
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 4 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: IM7
      SMC Version (syste
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Na

    Network Printer Troubleshooting
    If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Printer Troubleshooting - Yosemite
    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite

  • Epson Stylus CX7300 will not print after software update

    After doing the latest update for my Epson Stylus CX7300 printer it will not print.  When i open the printer utility it comes up with a communication error.  I can still scan documents but i can't print or even print a test page, check ink levels etc.

    Hi Kerry Bonney,
    Welcome to the Apple Support Communities!
    If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Have a great day,
    Joe

  • PIXMA MP 530 will not print with win7 64 PC

    My PIXMA MP 530 is connected via usb through a Linksys EA 6500 usb router. There are two PC's connected wired in this network. One uses Windows 7 32 bit and the other uses Windows 7 64bit. Cisco VUSB software is used to connect the two PCs to the printer. The Windows 7 32bit PC connects and prints fine but the 64bit PC says it is connected but will not print. I have updated the drivers and no luck. I have talked with Cisco tech service but couldnt resolve my problem and said I would need to buy a new printer. The 64bit PC does print when shared through the 32bit PC. Can this be fixed or go with a new printer?

    Hi VlcV50,
    If Linksys is saying the only way to fix the issue is to upgrade the printer, I would have to agree with them.  The PIXMA MP530 doesn't have it own built in networking capabilities, so in your case it's relying on the VUSB software from Linksys to do the networking job.  It sounds like either the VUSB software isn't compatible with the 64 bit version of Windows 7, or there is a limitation in their software in the 64 bit version that doesn't exist in the 32 bit version that is preventing the software from sending the printer information across the network.
    Fortunately the vast majority of our current models have built in networking support so you can connect any of them to the router either via Ethernet or via WiFi if the printer doesn't have an ethernet connection or you prefer to use it wirelessly to save on cabling.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Hp 1315 will not print with 10.6.7

    I cannot find any answers to this strange set of circumstances.
    I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
    I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
    -- uninstalling the hp software
    -- downloading the most recent driver from the HP website
    -- deleting the printer from the Print & Fax window and then adding it again
    -- running the "Reset Printing System" on the Print & Fax window
    -- running "Software Update"
    -- unplugging, replugging, restarting, etc.
    -- running the test page on the printer
    -- using the device to copy (i.e., using it separate from the computer)
    -- checking to see that there are no lights blinking on the device and that it has toner and paper
    The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
    I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
    I must be able to print things for my business. Can anyone help me.

    Download and use the updated HP software from their web site, don't use the disk.
    You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
    Step by Step to fix your Mac

  • H-P Laserjet 4L printer will not print with Windows 7 operating system. Need help

    I have an H-P Laserjet 4L printer that worked fine with a Dell PC and Windows XP. But, it no longer worked when the PC was updated to Windows7. I was advised to buy an adapter that would accept the H-P plug and connect to the PC by means of a  USB port. I did that, but the H-P still will not print. Anyone know what to do about this problem?
    EugeneZ

    Hello EugeneZ,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
    The support page for your product may be helpful in the meantime: HP LaserJet 4L/mL Printer series
    I hope this helps!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Epson Pro 4000 will not print

    I have been searching and calling epson about the drivers for the 4000 using 10.6 and with no luck and a time frame they told me to contact apple that they are going to supply one I would like to know if there is a drive for me to print with my equipment or am I just going to have to install the old operating system?
    can you give me a solution?
    thank you

    What type of 4000 is it? You're sure it's not listed here:
    http://support.apple.com/kb/HT3669
    Apple won't write a driver, it will have to come from Epson. If Epson releases a driver, Apple will make it available with Software Update.

  • Macbook pro will not print on wifi

    ipad + iphone all print on wifi but not macbook pro tryed everyting bar pulling my hair out any help would me much appreciated

    Reset the printing system on the Mac. You will then need to re-add your printer.
    http://support.apple.com/kb/HT1341

Maybe you are looking for