Epson XP 600 paper size error with IPAD?

Solutions for Epson XP 600 paper size error with IPAD?

You may have to switch between A4 and Letter size.

Similar Messages

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

Photosmart 375 paper size error msg

My Mac has OS X 10.10.1. When I attenpt to print on my portable photosmart 375, I receive the error message "Paper is too small. Choose a larger paper size." I believe I should be choosing 4x6 size in the print dialog box on my computer, and the same in the printer's menu, since that is the size of the photo paper for this small printer. However, in the print dialog box on my computer, no photo size options (4x6, 5x7) come up, only Letter, A4, etc. As for the printer's menu, the HP manual states that I can select "paper size" choosing Menu -> Help -> Paper Size, but the list of options under Help on the printer's menu gives all that the manual states should be there EXCEPT "paper size". I have manually downloaded the latest Mac updates for hp printers. I have reset the printer to default settings. I appreciate any help you can give.

Hi @penelopem,
Welcome to the HP Forums!
I noticed that your HP Photosmart 375 is giving you a paper size error message. I am happy to help you with this issue!
Please take a look through this guide, Changing Print Settings in Mac OS X, and follow the 10.8 steps.
Otherwise, if that does not work you can probably use the printer as a standalone using the memory card slots. Troubleshooting Memory Cards.
For future reference, your printer's user guide can be found at this website, HP Photosmart 375 Compact Photo Printer User guides.
The last suggestion is to consider upgrading your printer to one that has full feature software and drivers available for Mac OS X 10.10. If you wish to do so, please call our phone support at 800-474-6836 for your upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Paper Size issues with CreatePDF Desktop Printer

Are there any known paper size issues with PDFs created using Acrobat.com's CreatePDF Desktop Printer?
I've performed limited testing with a trial subscription, in preparation for a rollout to several clients.
Standard paper size in this country is A4, not Letter. The desktop printer was created manually on a Windows XP system following the instructions in document cpsid_86984. MS Word was then used to print a Word document to the virtual printer. Paper Size in Word's Page Setup was correctly set to A4. However the resultant PDF file was Letter size, causing the top of each page to be truncated.
I then looked at the Properties of the printer, and found that it was using an "HP Color LaserJet PS" driver (self-chosen by the printer install procedure). Its Paper Size was also set to A4. Word does override some printer driver settings, but in this case both the application and the printer were set to A4, so there should have been no issue.
On a hunch, I then changed the CreatePDF printer driver to a Xerox Phaser, as suggested in the above Adobe document for other versions of Windows. (Couldn't find the recommended "Xerox Phaser 6120 PS", so chose the 1235 PS model instead.) After confirming that it too was set for A4, I repeated the test using the same Word document. This time the result was fine.
While I seem to have solved the issue on this occasion, I have not been able to do sufficient testing with a 5-PDF trial, and wish to avoid similar problems with the future live users, all of which use Word and A4 paper. Any information or recommendations would be appreciated. Also, is there any information available on the service's sensitivity to different printer drivers used with the CreatePDF's printer definition? And can we assume that the alternative "Upload and Convert" procedure correctly selects output paper size from the settings of an uploaded document?
PS - The newly-revised doc cpsid_86984 still seems to need further revising. Vista and Windows 7 instructions have now been split. I tried the new Vista instructions on a Vista SP2 PC and found that step 6 appears to be out of place - there was no provision to enter Adobe ID and password at this stage. It appears that, as with XP and Win7, one must configure the printer after it is installed (and not just if changing the ID or password, as stated in the document).

Thank you, Rebecca.
The plot thickens a little, given that it was the same unaltered Word document that first created a letter-size PDF, but correctly created an A4-size PDF after the driver was changed from the HP Color Laser PS to a Xerox Phaser. I thought that the answer may lie in your comment that "it'll get complicated if there is a particular driver selected in the process of manually installing the PDF desktop printer". But that HP driver was not (consciously) selected - it became part of the printer definition when the manual install instructions were followed.
However I haven't yet had a chance to try a different XP system, and given that you haven't been able to reproduce the issue (thank you for trying), I will assume for the time being that it might have been a spurious problem that won't recur. I'll take your point about using the installer, though when the opportunity arises I might try to satisfy my cursed curiosity by experimenting further with the manual install. If I come up with anything of interest, I'll post again.

How do I get my HP 2645 to print 4x6 cards. It gives me a mismatch paper size error

How do I get my HP 2645 to print 4x6 cards? It gives me a mismatch paper size error.

Hi @aleek,
Thank you for visiting the HP Support Forums! I see you would like to print 4x6 cards to your HP Deskjet Ink Advantage 2645, when you attempt to print the card you get a 'Paper Mismatch' error.
I would like you to go ahead and take a look in your User Guide on page 10, here it shows how to load the media and change the printing preferences, although it shows Photos, you would use the same guidelines and steps for the Index cards, just be sure to change the media type to the correct card you are using.
Once you have the media loaded and settings set if you are still getting the error, continue here: 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
I hope this helps, if you have anymore questions please let me know.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart c7180 paper jams & wrong paper size errors

About 5 weeks ago I bought an ASUS computer with Windows 7, 64 bit and installed the drivers for my printer from the hp website. The printer is hooked up to my wireless network. No problem. 3 weeks later I have constant paper jams, I did the standard clean out paper, clean dust off of rollers and while on, unplug plug from back of printer then from outlet and wait a bit then plug back in. I was able to print a test page then it started happening again, sometimes reporting a paper jam error, sometimes a wrong size paper error, and sometimes an out of paper error. I also noticed that the rollers seem to be trying to grab the paper really fast (faster than they normally did). I have had this printer for many years-not even sure how many-and have hardly had an issue with it ever. I love it.

HI CFox,
Here is the link to the support document for paper jams for your printer. This is the most comprehensive document for paper jams on your printer. Let us know if this works for you or not.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Paper size error

I just updated my HP software (printer is an HP Office JetPro 8500 A910) abdout 2 weeks ago. Since then, when I try to print from either of my iPads, I get the following error on trhe printer "Paper size or type is incorrect. Press OK to cancel job". Both iPads are running IOS 8 (one is 8.0.1 the other is 8.1) The same job prints fine from my PC. How can I revert to the previous level of software?
This question was solved.
View Solution.

Hi @BobsK
I know this might sound strange, but I think the following steps will resolve the issue;
Please leave the printer on and unplug the power cable, then turn off both of the iPads Reconnect the printer, turn on the iPads and try printing again.
The strange thing is, I think this error is a result of a communicate issue. I don't know this error appears, it seems kinda deceiving to me, but if I recall this solution might do the trick.
Please let me know if the issue persists, or is resolved. If you require further assistance I will happily do all I can to help.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I choose a paper size on my iPad when I print?

I need to print on 8.5" x 14" paper, but cannot choose the paper size in Adobe Reader on my iPad 2 when I print.
Please help!

According to a document by Canon on their AirPrint printers, this appears to be a limitation of AirPrint:
"Paper Size
With AirPrint, the paper size is selected automatically according to the app being used on the Apple device and the region in
which AirPrint is used.
When Apple's photo app is used, the default paper size is L size in Japan, and 4"x6" or KG in other countries and regions.
When documents are printed from Apple's Safari app, the default paper size is letter size in the U.S. region, and A4 in Japan
and Europe."

Excel 2010 paper size issue with PCL6 drivers after KB2592687 installed on client

When I connect to the RDS server and open Excel with the PCL6 printer and select File / Print the paper size says Custom Paper Size and I can not change the paper size here, in the Page Layout tab or in the drivers properties pages. Using the PS driver there
is no issue. I've tried using several stock PCL6 drivers from Windows 7 and have the same issue such as the HP LaserJet P4014/4015 PCL6. Using the Lanier LP131n PCL6 or PS I had the issue with PS as well.
I do not have the drivers loaded on the server so it is using Remote Desktop Easy Print. If I do load the drivers and allow it to use them then there is no issue but I cannot configure the printers options without taking ownership of the printer so that
is not desirable.
If I do not install KB2592687 then there is no issue, but that is not an option as I am dealing with a customer who's IT manager refuses to remove this, even to test it, and says our printer driver has the issue and is not compliant with MS TS.
Could I be missing any configuration, hotfix, policy that could explain this issue or any other workaround? Or is there a change required to our printer driver for this?
Test setup:
I created a new Windows Server 2008 R2 Standard server with SP1, Added the RDS Role, Installed Office 2010 Professional with SP1 using the Terminal Services product key. No updates were installed. I have tested installing every possible update as well for
both Server and Office.
I then created a new Windows 7 Professional x86 with SP1 client, installed PCL6 & PS printers, installed KB2574819 and KB2592687. No other updates were installed. I have tested installing every possible update as well.

Hi,
Did you find any particular Event ID for your issue?
To troubleshoot this issue, have you tried changing the default printer and printing from other programs such as Word or any other?
The issue which you are facing might occurs because the Microsoft XPS Document Converter (MXDC) determines the paper size by using the FormID value on the server. As you commented that you are using Easy print driver first you can find incorrect paper size
if RD Easy Print printer driver first is enabled.
To work around this issue, use the forms that are defined by the system when you print. The paper sizes for these forms match on the server and on the client computer. Additionally, a printer driver can rename these forms. Please refer below article for more
information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
Apart from this providing link to understand RD Easy print in Windows 7 & Server 2008 R2.
Hope it helps!
Thanks.

HP 7410 All-in-one - incorrect paper size error

When I print envelopes thatb are not a standard size I get an error before each envelope prints saying the paper size does not match up. I make sure I enter in exactly the size of the envelope but it still stops before eacvh envelope. this is so annoying when I print a 100 envelopes at a time. Does anyone know how to fix this?

I'm having the same issue. Did you ever find a solution? I have two lights in the resume section, and the one blinking is the on that looks like a black water drop. I thought it might be the ink, and I just went out and bought a b/w, and color cartridge. That didn't work. I've opened and looked through the back and the front, and I can't find any paper. I read somewhere that I should delete the software, and re upload. I deleted it, and thought I had the software...yep, I don't dummy me. Now I need the software for it...it always seems to happen when I need it most. I've also noticed that everything stalls to print, when I use quick print.

Paper Size Error: The specified custom paper size is not supported in the selected tray.

This happens when I try to print a web page using firefox. When I copy and paste the same yrl into safari and select that page in Safari it prints without a problem.

Hello Bhumika2 ,
Welcome to the HP Forums.
I see that you are having some printing issues with paper sizes.
Seeing that the operating system is 10.5, the printer is not supported on this version. I suggest that you check for apple updates and see if anything is available.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

C5280 printer paper size error

It wont let me change the paper size in the features section. I want to custom size the paper and it wont let me hit ok after putting in the size I need. It says the custom paper size that you have defined will not become available until you have exited and re entered the printing preferences/properities Im not sure what this means.

I can't get anything to save. I exit and return, and the custom paper size I set up won't show up. I hate this printer and will never buy another hp.

YouTube error with iPad 2 running iOS5

I get an error 'The operation could not be completed' anytime I try to use YouTube on my iPad. I can open the YouTube application and see video options but get the error when I try to play them. I get the same message when trying to play YouTube videos either in Safari or Facebook. The iPad is a week old and I immediately updated to iOS5 so I don't know if it's a problem unique to iOS5 or what. Can anyone help?

Another update - Fixed thanks to another post by doing the following on my SonicWALL...
Security Services --> Gateway Anti-Virus --> Configure Gateway AV Settings --> Enable HTTP Byte-Range requests with Gateway AV
Click OK

Paper Size Error: The paper size selected in the printer driver software does not match the paper

HPofficejet 7500 E910
This question was solved.
View Solution.

I see this question several times, and one response asking the person to have patience.. however that was in February - it is now April, and i am not able to locate an actual answer to this question. My printer is also giving me this error (Officejet Pro 8000 -A809w), even though is it very obviously not true. I have unplugged and replugged and restarted, etc. I am trying to print on a regular landscape oriented 8.5x11 sheet of paper. The last thing i printed was a single envelope (also appropriately chosen in page setup), with the paper guides narrowed.. the envelope printed and i moved the guides back to the normal position and replaced the letter sized paper. Now the printer tells me that's not what i've done.
Running Mac OSX Lion 10.7.3 - it worked fine all day til now. It's done this a time or two previously, but unplugging the printer has solved it - not this time.
Help!

Epson XP 600 paper size error with IPAD?

Similar Messages

Maybe you are looking for