Epson XP-610 will not connect to Macbook Air

Epson XP-610 says cannot find computer, also says IP already in use. The printer has green WiFi icon lighted. How do I connect to print wirelessly?
My WiFi is a pocket WiFi with Telstra.

Try the suggestions here >  iOS: Device not recognized in iTunes for OS X
If nothing helped, repair permissions.
Disconnect the iPhone.
On your Mac open Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Then select: Repair Disk Permissions
This process can take a few minutes.
When it's done, restart your Mac and connect the iPhone.
If that doesn't help, reset the PRAM >  About NVRAM and PRAM

Similar Messages

  • IPhone 4 will not connect to macbook air via bluetooth. Message " not supported"

    iPhone 4 will not connect to macbook air via bluetooth

    Try the suggestions here >  iOS: Device not recognized in iTunes for OS X
    If nothing helped, repair permissions.
    Disconnect the iPhone.
    On your Mac open Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Then select: Repair Disk Permissions
    This process can take a few minutes.
    When it's done, restart your Mac and connect the iPhone.
    If that doesn't help, reset the PRAM >  About NVRAM and PRAM

  • IPod Touch 4th Gen will not connect to Macbook Air

    Okay, so I've been trying to connect my iPod to my Macbook Air for a few days now to get some very important videos to transfer into iPhoto so I can get them sent to people that have been requesting them of me by their deadlines. I've also wanted to do some general charging of my device.
    Here's the problem; when I connect the USB cord (Original one that I received with my iPod from Apple) to the only USB port the Macbook Air has, it refuses to connect, charge and/or synch with my computer. Up until about three days ago, it would connect and charge just fine with the computer, but now it is not.
    When I plug the usb into my wall charger however, it recognizes and charges the device just fine.
    I've had both my Air and iPod inspected recently at the Genius Bar, and there is NOTHING wrong with either device, so that is NOT the cause of the issue.
    I want to know how to fix this, and whether or not buying a new cord would help, as I need the files on it to get to my computer ASAP. (Emailing the videos from the iPod is NOT an option as they're longer than one minute, and it will only let me email one minute clips.)

    I brought all three yeah.
    And the guy that assisted me hooked it to their computers and it worked fine, and then he hooked it to mine and wiggled it around for a couple seconds and it worked for him but now I can't get it to do anything at all.
    And as I said he checked the hardware and everything of both my Air and the iPod and said there was nothing wrong with it.
    I'll try buying a new cord when I get paid and see if that fixes anything.

  • New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

    Hello! To anyone who tries to help me, thank you in advance!
    I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
    I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
    None of this seems to be working, suggestions very appreciated!
    Thanks
    MP

    Try Linc's suggestion first.  That should cure your issue.  If not, here's something else to consider:
    PrinterMaccer wrote:
    I installed the software from the site ...
    Apple keeps a set of current software for Epson printers.  You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key).  Then download Apple's software version from here:
    Epson Printer Drivers v2.18 for OS X
    Finally, set up the printer as shown here:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • IPhone Bluetooth paired but not connected to Macbook Air???

    My iPhone 4 will not connect to my MacBook Air 11" via Bluetooth.
    Continually get the "MacBook Air is not supported" error on the phone.
    Air is up-to-date.
    iPhone is up-to-date
    I've deleted the phone profile and reconnected a dozen times
    Air shows the phone paired
    iPhone shows the Air paired
    iPhone will not connect to the Air
    Yes, Bluetooth Sharing is enabled in Air prefs.
    I need suggestions.

    See these two links:
    Understanding Personal Hotspot
    Troubleshooting Personal Hotspot

  • IPhone5 bluetooth can not connect to macbook air?

    hi
    my iPhone5 bluetooth can not connect to macbook air (mid 2012).
    is bluetooth on iPhone 5 designed so that it CANT connect to computers? 
    thanks

    Yes, BT on the iPhone only has profiles for hands-free, audio, tethering and control. It does not support file transfer profiles.

  • HT201343 can not connect my Macbook Air to apple TV3

    can not connect my Macbook Air to my Apple TV3

    If it is early 2011 or newer running OSX 10.8 Mountain Lion then  you can mirror.
    A third party app called airparrot can help other models.

  • Ipad will not connect to my air extreme router but my IMac&air mac will

    Ipad will not connect to my air extreme router but my IMac&air mac will

    The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
    Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
    Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
    If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

  • External keypad will not connect to MacBook

    I have an external Samsonite Comptuer Keypad and it will not connect to my macbook. It is saying to press the key next tothe shift key, but there is not shift key, because it's only a keypad.
    If anybody knows what to do..please help!
    Also, there is not "Num Lock" but a "State Lock"
    Thanks!

    I am having a similar problem with using an external HD and timemachine for backups.  When I first connect the HD with a USB cable timemachine "sees" the drive and allows the backup to start.  The backup fails after about 5gb and says that the drive was "disconnected" and then drive is no longer recognized by timemachine and does not show up in Finder.  I also did not have an issue until I installed Mt. Lion.

  • TS1363 iPod Classic 160gb will not connect to Macbook.

    My iPod classic will not connect to my macbook. It is recognized by my wall charger, speakers, and FM transmitter in my car. I've had this trouble for some time, but before I attributed to my previous Macbook which had a few other problems. However I just got a new macbook, and it is still not coming up in Finder nor iTunes. Any advice is much appreciated!

    What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac?  Have you tried another USB cable just in case?
    What happens if you try to reset the device with it still connected to the Mac?
    How to reset iPod
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in iTunes and Mac desktop
    B-rock

  • New Apple Tv will not connect with iPad Air 2

    My new Apple TV will not recognize my iPad Air or Air 2, but will recognize all other devices in the house (iPhone 5c, 5s,  6, iPad mini, MacBook, etc).  What am I missing that the new Airs will not connect? All software is up to date. they are on same network.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • My zagg keyboard will not connect to iPad Air even though it has been working fine

    My Zagg keyboard will not connect with my iPad Air even though it has been working fine for weeks.  Bluetooth and keyboard are on and keyboard is connected to iPad.

    Hey Leelll,
    Thanks for using Apple Support Communities.
    It sounds like you are having trouble using a bluetooth keyboard with your iPad. If it is paired to a second iPad that may be an issue.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Have a nice day,
    Mario

  • Airport extreme will connect to some iPhones and iPads, but not all, and will not connect to MacBooks.

    Why will the airport extreme not connect internet to macbook or some iPhones? It will connect to all our iPhone 6's and iPads but not to the MacBooks. The macbook says wi-fi has the self assigned ip address of ___,____,____,___ and will not be able to connect to the internet,

    Have you done a full restart of the network in correct order?
    Shut down everything.. OFF not standby.
    Power on in order.
    Modem.. wait 2min
    Router.. (Extreme??) wait 2min
    Macbook.. Only the Macbook.. do restart anything else yet.
    Any luck??
    No luck reset the Extreme to factory and redo the setup.. this time use all short names, no spaces and pure alphanumeric. Bonus for names <10 characters.
    Use passwords with the same rules.. only can be 8-20 characters.. mixed case and numbers.
    Try again with the Macbook..
    No luck give explicit details of the setup of the whole network.

  • Why will my Airplay will not connect to macbook pro?

    My apple tv connects to my ipad via airplay easily.  Yet my macbook pro continues to get a error message "Could not connect ot apple tv".

    This is a network issue, troubleshoot the network.

  • Why is First Generation iPad not connecting to MacBook Air?

    We received our daughter's first generation iPad. Whenever I connect it to the new MacBook Air the iPad will keep beeping, and give a message that "this iPhone is not longer connected to itunes" The beeping continues.
    It connects OK to my Macbook Pro, but I don't want to sync it with the MacBook Pro.
    I re-installed iTunes on the MacBook Air and then plugged in the iPad and got the message that the USB port was being disconnected because there was too much power draw on that port. The only USB connection is the iPad.
    Any ideas on what this could be? I'm using a newer cable, the iPad was 45% charged. Is there some limitation of the power draw on the MacBook Air? Is this older iPad drawing more power than the MacBook Air is capable of?

    - Macbook Air is plugged into external power
    - I cleaned the connections on the iPad and on the cable
    - Nothing changed, still get the USB power message and/or the message from iTunes that the device is no longer connected.

Maybe you are looking for

  • Accent keys/tilde keys ignored in urxvt

    I've recently been noticing a problem when using vim.  On the DE layout there's a tilde key that can be reached by hitting "alt gr" and "+", which works fine in my terminal, firefox, etc. (It's a "dead key", thus requiring a double-press, but I don't

  • Physical inventory 4.6c & Ecc 6.0(urgent)

    Hi all            We are in to 4.6 c and planned to move to Ecc 6.0 in few months. I have a situation like to do the physical inventory of the warehouse but my thoughts would be to do it after the upgrade as we'll have additional features in ECC6.0 f

  • Broken Default Domain Policy! GPOFIX Doesn't work

    Justin1250 wrote: So I noticed that command prompt is open in the users directory. Did you right click on the command window and run as administrator? It should run from the system directory as an admin.Yes I did. I just made sure again to run it as

  • How to install DRM in 11.1.1.3

    Hi all, can any one help me how to install DRM in 11.1.1.3 (please write the procedure) and how to post-configure or configure. best regards. Edited by: 869377 on Jun 30, 2011 1:04 AM

  • SD Card Failure - Anyone else?

    I had one of 3 Transcend 1G cards result in complete failure, loosing about 400 pictures of Costa Rica birds. Neither the camera nor computer would recognize card after the shoot. Disk Doctors disassembled the card and hooked it up to test modules an