Epub to be created and viewed with computer and ipad

Now that Pages can work with video, we at the school would like to create content to promote the ipad while still being able to view it on a computer ereader. I've tried with Adobe which only handles SWF and with the Firefox add on EPubReader. I'm not sure if it me or if it can be done at all. Has anyone had success? The files read the video perfectly on the iPad but only the text and poster frame on the computer. Suggestion?

I'm not sure if it me or if it can be done at all. Has anyone had success? The files read the video perfectly on the iPad but only the text and poster frame on the computer. Suggestion?
Basically it is a "hit or miss" proposition. It all depends on which reader/application is being used. Some don't support embedded audio and/or video files at all. Others may have limited support but only for specific formats. You will likely have to warn users that such content is not supported by all readers. One alternative for wider viewing might be to include hyperlinks to a web page containing the media. However, this too would not be a universal solution as it requires active internet access which may or may not be available to all users.

Similar Messages

I have experienced great difficulty deleting photos from iPad I have followed advice and synced with computer and iTunes and deleted from computer and then synced again but managed to get hundreds more unwanted photos.

I have had great difficulty deleting photos from iPad I have followed advice and connected to computer and iTunes but cannot find anywhere to click on delete I also deleted photos fro computer and synced again and then found hundreds of more photos on iPad which were unwanted at the same time I lost a film I had purchased from iTunes and The soundtrack of film from iPod

Photos that were synced from your computer you should be able to delete by movin/removing them from where they were synced from and then re-syncing (or de-selecting the whole folder if you want to remove the entire album from the iPad).
Photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view. They should also appear in Windows Explorer on PC where you can delete them, and in iPhoto on a Mac you can delete them after importing.

Create folder view with files and tasks

Good day to you,
we want to support our software development procces with Vibe. What we are doing is, we make changes to the source code and protocol corresponding things in certain files.
We think in so called "releases" and every release consists of tasks and a list of changes. This list is held in an excel file, so I would like to create a folder view, which consists of tasks and files.
So far I could create a custom folder view with attachments at the top and a task list at the bottom, based on the task family.
The problem is, the attachment view as a standard folder view does not allow colleborative editing of attached files. You can only view and download attached files, but not open them via Office addin. Therefore you can not lock or version files, which is mandatory for collaborative work.
I would like to mix the file folder view with it's possibilities with a task folder view.
Any ideas?
Warm regards
bitschnau

There's no out of the box way to achieve what you're looking for.
Two solutions:
1. Your users would need to open the entry first and then click on the "edit this file" link.
2. You could code your own folder view or landing page element and build what you need.
HTH
Cheers
Erik
PS: Feel free to contact me offlist if you need professional support.

How to create materialized view with parameter and index ?

Hi all,
i am using oracle 11g.
i want to create parameter materialized view with two parameter (STORED_VALUE, LOV_NAME) with an index .
i have below view
CREATE OR REPLACE FORCE VIEW SR_MY_TEST(DISPLAYED_VALUE, STORED_VALUE, LOV_NAME) AS
SELECT DISPLAYED_VALUE , LOVVALUE.STORED_VALUE , lovname.lov_name
           FROM (SELECT T.LOV_VALUE_ID,
      T.LOV_ID,
      T.ORG_ENTITY_ID,
      T.STORED_VALUE,
      T.DISPLAYED_VALUE,
      T.ENTERPRISE_ID
     FROM MS_QS_LIST_OF_VALUES_T T) lovvalue, ms_qs_lov_names lovname
          WHERE lovvalue.lov_id = lovname.lov_id
            AND lovvalue.org_entity_id = 1
            and LOVVALUE.ENTERPRISE_ID = 100000
            AND LOVNAME.ENTERPRISE_ID = 100000;
i want to create index on   STORED_VALUE, LOV_NAME
Thanks
Damby

No.AFAIK, there's nothing called as "parameterized MV".
Materialized View store data like tables (and not like Views). So, does it make sense when you say - "table with parameters" ?
Could you please explain your business requirement?
What is the purpose behind those 2 parameters?

Digital Content Bundler and Viewer with CS5 for Ipad magazines?

Does anyone know where is the Digital Content Bundler and Viewer that Adobe promised to release in the summer of 2010 for Apple Ipad so that people can create interactive digital magazines like the new Wired issue?
http://blogs.adobe.com/digitalpublishing/2010/07/introducing_the_adobe_digital_magazine_wo rkflow.html
Here is what Dave Dickson said back in August,
By Dave Dickson - 6:16 PM on August 31, 2010 Reply
We’re working nights and weekends to get this release to you ASAP. Stay tuned to this blog for more info, as well as the Adobe Labs page at http://bit.ly/LabsDigPub
Poor old Dave, he must be very tired by now, I do hope Adobe Labs are paying him overtime rates for all his night and weekend work since June 2010.
Is he a millionaire yet?

Yes. You must subscribe to the Digital Publishing Suite. About $500-700 a month to start. There is a lot of pressure on Adobe to knock this off though; Join the fight. I want to publish to Ipad too - but 6-7k a year just for that????? forget it.

Create View with Force and No Force

Can Anyone Tell me how to create view with force and no force i have very little idea about this

This is the syntax.
CREATE [OR REPLACE] FORCE VIEW view
[(alias[, alias]...)]
AS subquery
[WITH CHECK OPTION [CONSTRAINT constraint]]
[WITH READ ONLY [CONSTRAINT constraint]];You can see interesting threads about this topic here.
Re: Creating view forcibly
Creating View forcefully
Cheers
Sarma.

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?
If not, then to me that is a huge retrograde step

No, the old album list view is not an option in iTunes 11...
You can restore much of the look & feel of the previous version with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

How to create a view with parameter?

who can tell me hwo to create a view with
parameters just like a cursor?

Hi,
This is not possible in Oracle. What u can do is create the view without the where clasue and supply the where clause at runtime.
Hope this helps...
Regards,
Ganesh R

What are the best options for creating a PDF with bookmarks and a hyperlinked TOC?

What I'm interested in is whether or not there is an alternate process I could follow that would side step Word 2011's inability to export to PDF with bookmarks and hyperlinked TOCs. How do you create PDF documents with bookmarks and hyperlinked TOCs in your documents?
Some background:
In Word 2010 and 2013 for Windows (and I'm sure this applies to older versions as well), you can export documents to a PDF file format where the exported file will carry over the bookmarks and hyperlinked table of contents. Specifically, by making specific text headers, will appear in the final PDF file as bookmarks on the side (see image taken from Adobe's website).
Regarding the table of contents, using Word's built in Table of Contents feature successfully ports the ability to navigate to a specific section by clicking on its chapter in the table of contents to the finished PDF file.
I've read several forum discussions that say it's not possible to do this from Word 2011, so my current solution is to just finish all documents on a Windows machine (either with parallels or a separate computer). The alternate process flow of creating a word document, exporting it to PDF, then rehyperlinking everything in Acrobat is just too time consuming to consider.

Hi, beejasaurus
I found a possible kluge from this discussion here
https://forums.adobe.com/thread/1008480
Create the hyperlinks in Word, save the file
Open that file with Pages, export as PDF.
The links work from that PDF.
Note, I did not try this with TOC but it worked with hyperlinks embedded in the Word document

Need help in creating a view with Encryption for hiding the code used by the multiple users

Hi,
Can anyone help me out in creating view with encryption data to hide the stored procedure logic with other users.
I have create a stored procedure with encryted view but while running this manually temporary views are getting created, therefore the problem is if there are 500 entries then 500 temp views will get created.
Any solution to aviod creating temporary views, please refer my code below
USE [etl_validation]
GO
/****** Object: StoredProcedure [dbo].[Pr_DBAccess_mod]    Script Date: 05/23/2014 12:53:22 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[Pr_DBAccess_mod](@ETL_CONFIG_ID INT)
AS
BEGIN
DECLARE @openquery NVARCHAR(MAX),
@DATABASENAME NVARCHAR(100),
@HIERNAME NVARCHAR(100),
@TABLENAME NVARCHAR(100),
@SERVERTYPE NVARCHAR(100),
@SERVERNAME NVARCHAR(100),
@USERNAME NVARCHAR(100),
@PASSWORD NVARCHAR(100),
@ETL_CONFIG_IDN NVARCHAR(100);
SET @ETL_CONFIG_IDN=CAST(@ETL_CONFIG_ID AS NVARCHAR);
SET @TABLENAME='Department';
SET @SERVERTYPE='SQL';
SET @SERVERNAME ='192.168.31.176';
SET @DATABASENAME='AdventureWorks2008R2';
SET @HIERNAME = 'HumanResources';
IF @SERVERTYPE='SQL'
BEGIN
/*SET @openquery= 'SELECT * INTO ##TestTable
                 FROM OPENROWSET(''SQLNCLI'',''server=192.168.31.176;Trusted_Connection=yes;'','''+@query+''')'
SET @openquery= 'CREATE VIEW '+@TABLENAME+@ETL_CONFIG_IDN+
                 ' WITH ENCRYPTION AS SELECT * FROM OPENROWSET(''SQLNCLI'',''SERVER='+@SERVERNAME+';TRUSTED_CONNECTION=YES;'',''SELECT * FROM '+@DATABASENAME+'.'+@HIERNAME+'.'+@TABLENAME+''')'
SELECT @openquery
END
EXECUTE sp_executesql @openquery
END

Hi aa_rif,
According to your description and code message, you execute the sp_executesql statement in your stored procedure, it indeed create many views with a tablename and ETL_CONFIG_ID named. If you need not to use these temporary views, you can delete them when
it contains the tablename in one view name.
In addition, if you want to create view with encryption in SQL Server, you can use directly the ENCRYPTION option to encrypt the T-SQL of a view in create view commands, for more information, see:
http://learnsqlserver.in/4/Create-View-With-Encryption.aspx. if not, you can descript more detail about requriements, so that more forum members can involve into the thread and help you
out.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Creating Materialized View with the Distinct key word

Hi
I need help to create Materialized View with the Distinct key word.
my query is
select distinct col1, col2 from t1;
is there any alternate of DISTINCT because I can not refresh the MV as fast on demand if I am using it and Fast on Demand is a must for me.

hi
check out this link
http://download-west.oracle.com/docs/cd/B12037_01/server.101/b10736/basicmv.htm#i1007299
http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/intro.htm#sthref183
hope this helps
CHeers

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF's and I cannot edit them as I could before such as using Tools Comment

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF’s and I cannot edit them as I could before such as using Tools>Comment&Markup or Tools>Advanced Editing>TouchUp Text Tool. All the functions are greyed out. Please advise.

What's your OS? Acrobat 8 is not compatible with any modern OS.
On Thu, Jan 15, 2015 at 4:16 PM, thomasc1234 <[email protected]>

How to create a view with a column of counts of the occurence of values

If my table is:
ID
1
2
3
3
5
5
5
I want to create a view with the following result:
ID   COUNT
1     1
2     1
3     2
5     3
How would I accomplish this?

Sorry, my mistake. I was thinking about counting distinct events.
I created a table with your example values:
You should do a projection with a calculated column = 1:
And then add this calculated column as an aggregated measure on the aggregation node:
Result:
Cheers,
Fernando

How to create a view with parameters; read the documentation but nothing!

Hello!
I'm new to the Oracle world but together with my coworkers we need to very quickly study Oracle to figure out whether we'll add Oracle to our list of supported databases or not.
Question: How do I create a view with parameters?
I've read the documentation but I could not find this! I found the sql syntax to create a view but no parameters whatsoever...
I have found on the web some very complicated way of doing this, but doesn't Oracle support Views with parameters?
The goal here is to return a recordset, don't forget, so,please don't speak about stored procedures unless you are going to tell me how to get a recordset out of a stored procedure! ;)
Thanks for all your help and attention!
Jorge C.

You can set up a parameterized view via context as follows:
1. Set up a procedure to set your context values:
create or replace procedure p_set_context (p_context IN VARCHAR2,p_param_name IN VARCHAR2,p_value IN VARCHAR2)
as
BEGIN
sys.dbms_session.set_context(p_context,p_param_name,p_value);
END;
2. Create your context using the procedure you just created
create or replace context my_ctx using p_set_context
3. This is the test table I'll use
create table my_table(col1 number)
and populate it:
begin
for v_index in 1..10
loop
insert into my_table values(v_index);
end loop;
end;
and the view that will be parameterised
create or replace view v_my_table as select col1 from my_table where col1 between sys_context('my_ctx','start_range') and sys_context('my_ctx','end_range')
4. Now set the parameters using the procedure above.
begin
p_set_context('my_ctx','start_range','1');
p_set_context('my_ctx','end_range','5');
end;
5. Selecting from my_table will give you 1 to 10 (no surprise there :-) )
selectng from v_my_table will give you 1 to 5
You can use the context to set formats etc using the same principle. A common gotcha to watch for is trying to set the context directly using DBMS_SESSION.SET_CONTEXT instead of creating a procedure. This belongs to SYS and SYS won't have the privileges to set your context so you get an insufficient privileges result leading to much headscratching and unnecessary grants (at least that's my understanding of it).
Sorry Jorge, as you're new to Oracle I should also have pointed out for completeness sake, that you can change the parameters at any time through recalling the p_set_context, for example, following on from above, after your "select * from v_my_table" and seeing 1 to 5, you could then do
begin
p_set_context('my_ctx','start_range','3');
end;
and when you requery 'Select * from v_my_table' you will now see rows 3 to 5.
Bit of a simplistic example, but you can see how easy it is. :-)
Message was edited by:
ian512

Epub to be created and viewed with computer and ipad

Similar Messages

Maybe you are looking for