Equavalent server to this IBM Machine.
The customer is Bimbo Bakeries, USA.
Requirements : Hardware refresh of 2 UNIX servers, Each server listed hosts its own application, which is either OES (Oracle Enterprise)and SAP. They do not need any application upgrades, they just need new hardware, and a plan for migrating the applications and data to the new servers. The server capacity must be sufficient for a 4-year hardware refresh cycle.
When I asked " What is the main purpose of these two systems in this architecture.", they answered " OES is a proprietary Order Entry System, SAP is an Enterprise Resource Planning system (ERP), it is only being used to store and access older ERP data. The amount of disk storage used on server for SAP data is 170 Gigabytes of raw disk. The informix database does not used cooked filesystems.
They are IBM RS/6000 systems that have 2 processors in one system and 4 in the second system. The processors are likely 450MHz.
One of my friend suggested a pair of M4000 servers each with 2 processors and 16GB of Memory each.
But at this moment M4000 is not recognized by the EDS standards and yet to be tested.
What about SunFire V445 or T2000 or Sun Fire[tm] V490, RoHS:YL .
Please let me know whether these systems are not near to M4000 or not valid upto next 4 years (EOL).
Please guide me.
Thanks
Yadav
Also whose EOL should not be in next 4 years.
Also it should run Soalris 10. Other wise please suggest me the correct person with mail ID.
One of my client is using this 2 old IBM Hardware and software. I recommend them to go to SUN. They want the equavalent Hrdware capacity in SUN.
Please give the quotation for these equavalent or near by equavalent servers and The amount of disk storage used on server sap system for SAP data is 170 Gigabytes of raw disk. The informix database does not used cooked filesystems.
OES System :
Hardware / Configuration
Vendor IBM Corp. AMS Processor Power PC RS64III AMS
Model Power PC RS64III 7026/H80 AMS Processor Speed
RAM 4,194,304 KB (4,096 MB) (4 GB) AMS Processor Count 2 AMS
Total Drive Space 528,445,192 KB (516,060 MB) (503.96 GB) AMS BIOS Unknown AMS
Free Drive Space 277,779,868 KB (271,269 MB) (264.91 GB) AMS Drive Count 26 AMS
SAP System :
Hardware / Configuration
Vendor IBM Corp. AMS Processor Power PC RS64III AMS
Model 7026/H80 AMS Processor Speed
RAM 6,291,456 KB (6,144 MB) (6 GB) AMS Processor Count 4 AMS
Total Drive Space 88,244,224 KB (86,176 MB) (84.16 GB) AMS BIOS Unknown AMS
Free Drive Space 51,895,696 KB (50,679 MB) (49.49 GB) AMS Drive Count 22 AMS
Similar Messages
-
Hello,
I am an it tech in need of some help. I don't mess with our servers that often, and I could use some guidance in setting up this particular machine. We would like to use this server with 2012 R2 for Michigan M-step caching machine, and possibly setting up
a ticket system for maintenance, and technology repairs. This server was configured before I got here, and I would like to delete the current novell software and Server 2003, and start over fresh. Is there a manual that you could recommend, or a step by step
instruction guide that will show me the correct steps to take. I have watched youtube videos, read different articles, however they really didn't give me the information that I am looking for to set up this server. Any help you can give me would be greatly
appreciated!!
Thank you,
AngieThe very first thing you need to determine is if the ML360 is a 32-bit or 64-bit server. If it is 32-bit, it's a no-go. Windows Server 2012 is 64-bit only.
The next issue is installation media. Does the ML360 have a DVD or CD reader? 2012 R2 comes on DVD. It's possible to install from USB, but that's if the system supports it. Does the ML360 support booting from USB?
Yes, the smart start capability is neat, but it is generally geared to a specific release of an operating system for a server that supports that operating system. The ML 360 is old enough that smart start may not work on it.
I would go out to HP.com and download all the latest drivers for the ML360 and put those on a CD. I would also get the latest BIOS/Firmware. Make sure the system is updated to the latest BIOS/Firmware.
Before trying to give any further suggestions, it would help to know exactly what you have.
. : | : . : | : . tim
Tim -- all HP ML360s support 64-bit architecture. That was the first Series HP released full x64 bit architecture support. (I'm an HP Accredited Platform Specialist)
I agree with the other points however.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015! -
SSL VPN message "This (client) machine does not have the web access privilege."
Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
heading "My Intranet"
url-text "Cisco" url-value "http://192.168.0.2"
url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
url-list "MyServers"
functions svc-enabled
svc address-pool "sslvpnpool"
svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan -
ODBC Problems with SQL Server 2012 on Virtual Machine
I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.
My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world! -
Backing up Windows Server 2012 R2 Virtual Machine
When I try to back my Windows Server 2012 R2 Virtual machine up to a NAS, using the Windows Server Utility I get the following errors:
There was a failure in preparing the backup image in one of the volumes in the backup set.
Detailed error: The process can not access the file because another process has locked a portion of the file.
When viewing the errors in Event viewer I get the following error:
The backup operation that started at '2014-03-12T10:23:08.681735200Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Any help will be appreciated.
Regards
LouisHave a look, check whether the solution is working for you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/windows-8-backup-error-code-0x807800c5/0ec7fea0-bb4d-44d2-9381-c364ef2c1f6c
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
BOE XI R2 on Windows Server 2008 64 Bit Machine
Hi,
We are trying to install BOE XI R2 on Windows Server 2008 64 Bit Machine.
For some reason when the install finishes we dont get all the Program Icons (Like .Net Admin Launchpad).
Are there any different steps that we have to take to get a successful installation? Will XI 3.1 take care of this?
Thank you
Edited by: Charlie DeSaussure on Jan 22, 2010 8:44 PM
Edited by: Charlie DeSaussure on Jan 22, 2010 9:40 PMHi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful. -
Oracle Workflow Server in a SUN machine; and the Oracle
Hi All
I have installed Oracle Workflow Server in a SUN machine; and the Oracle
Workflow Client (Builder) in a WIN2000 machine.
In the SUN machine, I already had installed Oracle9i and OMS (Oracle
Management Server) version 9.2.0.1.0.
In the WINDOWS 2000 machine, I already had installed the Oracle9i
Client and the OWB (Oracle Warehouse Builder) version 9.0.3.35.0. Workflow
Builder
was installed together with Oracle Client components.
I have a OWB (Oracle Warehouse Builder) project, and I deploy and schedule
JOBS in OEM.
Now I need Oracle Workflow in order to better ordering, manage and schedule
that jobs.
I'm reading the following documentation:
Oracle Workflow Guide (Release 2.6.2)
http://www.csis.gvsu.edu/GeneralInfo/Oracle/workflow.920/a95265.pdf But I think Oracle Workflow is very complex to learn quickly.
My OWB Project has several mappings that load tables in a Data Warehouse.
When I deploy these mappings one by one, in OEM, I can execute them in OEM
and they work well.
But when I use the Workflow Deployment Wizard, I create a new Workflow
Project (Item type and Process).
But I can't Launch this process. I go to Launch Process in Workflow page
(http://:/pls//) but when I iniciate the project,
it stops in the OWB Standard Begin Function. It does not go ahead.
Well, when I use the Workflow Deployment Wizard inside OWB, it generates
jobs that can
be viewed inside OEM (Oracle Enterprise Manager) too. But when I submit
these jobs, I can't get success too.
Can somebody help me? May you guide me in order to solve my problem, or send
me some
documents or links about workflow, and it's integration with OWB and OEM?
Best regardsI think this might be more of an OWB question, and how OWB uses workflow, I have sent an email internally to try and get someone to responsd. You should also consider contacting Oracle Support if you are having these kinds of problems.
Hi All
I have installed Oracle Workflow Server in a SUN machine; and the Oracle
Workflow Client (Builder) in a WIN2000 machine.
In the SUN machine, I already had installed Oracle9i and OMS (Oracle
Management Server) version 9.2.0.1.0.
In the WINDOWS 2000 machine, I already had installed the Oracle9i
Client and the OWB (Oracle Warehouse Builder) version 9.0.3.35.0. Workflow
Builder
was installed together with Oracle Client components.
I have a OWB (Oracle Warehouse Builder) project, and I deploy and schedule
JOBS in OEM.
Now I need Oracle Workflow in order to better ordering, manage and schedule
that jobs.
I'm reading the following documentation:
Oracle Workflow Guide (Release 2.6.2)
http://www.csis.gvsu.edu/GeneralInfo/Oracle/workflow.920/a95265.pdf But I think Oracle Workflow is very complex to learn quickly.
My OWB Project has several mappings that load tables in a Data Warehouse.
When I deploy these mappings one by one, in OEM, I can execute them in OEM
and they work well.
But when I use the Workflow Deployment Wizard, I create a new Workflow
Project (Item type and Process).
But I can't Launch this process. I go to Launch Process in Workflow page
(http://:/pls//) but when I iniciate the project,
it stops in the OWB Standard Begin Function. It does not go ahead.
Well, when I use the Workflow Deployment Wizard inside OWB, it generates
jobs that can
be viewed inside OEM (Oracle Enterprise Manager) too. But when I submit
these jobs, I can't get success too.
Can somebody help me? May you guide me in order to solve my problem, or send
me some
documents or links about workflow, and it's integration with OWB and OEM?
Best regards -
How to start the admin server on another WLS machine?
Hi,
I have a weblogic cluster with 2 weblogic machines: machineA and machineB.
The cluster contains 4 managed servers (2 on each WLS machine)
The admin server runs on machineA (standalone).
I have a file backup of the domain directory on machineA.
Suppose machineA crashes.
How can I start the admin server on machineB?
Kind regards,
PieterThanks for your reply,
I know how to (re)start the admin server on machineA. But in this case I want to start the admin server on machineB.
The documentation says:
Restarting an Administration Server on Another Machine
If a machine crash prevents you from restarting the Administration Server on the same machine, you can recover management of the running Managed Servers as follows:
Install the WebLogic Server software on the new administration machine (if this has not already been done).
Make your application files available to the new Administration Server by copying them from backups or by using a shared disk. Your application files should be available in the same relative location on the new file system as on the file system of the original Administration Server.
Make your configuration and security data available to the new administration machine by copying them from backups or by using a shared disk. For more information, refer to Directory and File Backups for Failure Recovery.
Restart the Administration Server on the new machine.
Simply starting the admin server on the other machine does not work because it tries to start the admin server on the ip address of the old machine.
Edited by [email protected] at 05/10/2007 7:47 AM -
Hallo,
I just installed LabVIEW 8.2 DSC-Module and tried to configure a OPC Client Instance. I get the Error "Unable to browse OPC Server from the selected machine / Error -2147221163 occurred at GetOPCServerList.vi". I have no OPC-Server installed, but is there no Demo-Server?
Thank you
ThomasThis issue might be related to opcenum not being registered correctly. Please follow the steps explained in this document to fix this problem.
As OPCdemo follows the OPC 1.0 standard it is not supported by the OPC client in LV DSC 8.x which supports OPC 2.0 and 3.0 servers. You can download an OPC 3.0 compliant demoserver from Matrikon.
I hope that helps,
Jochen Klier
National Instruments Germany -
How to access application server 10g, if client machine is proxy settings.
hi,
i have installed oracle application server 10gR2, on vertual machine, windows2003
my forms are stored in forms folder , i can access the application/forms
throuhg client machines, if proxy setting is unchecked, but if proxy is chacked can't access application.
as there with the user machine is required with proxy setting. how
to access the application. i mean what is the configuration.
in application server so that any computer (client machine)
can access weather it is having proxy setting or not.now i enabled the java console to see the trace, there i found. if proxy is checked in client brouser with 8080 port which is required by organisation.
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\fresh
Proxy Configuration: Manual Configuration
Proxy: eproxy:8080
Proxy Overrides:
Jar cache disabled by user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Where as if there if i remove proxy setting by uncheck. then application goes smoothly. -
Cannot Start OATS Server After Restart the Machine
Hi, All
I installed the Linux OATS server on a virtual machine.After i restart the machine, always failed to restart OATS server.
I login the weblogic console to start the application of oats, failed. got error message
javax.naming.NameNotFoundException: Unable to resolve 'OATS_common_DS'. Resolved ''; remaining name 'OATS_common_DS'.
Check the log file:
Caused By: javax.persistence.PersistenceException: Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [OATS_common_DS].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'OATS_common_DS'. Resolved ''; remaining name 'OATS_common_DS'
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:417)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:164)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:221)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:209)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.newPersistenceContext(TransactionalEntityManagerProxyImpl.java:65)
at weblogic.deployment.BasePersistenceContextProxyImpl.getPersistenceContext(BasePersistenceContextProxyImpl.java:170)
at weblogic.deployment.BasePersistenceContextProxyImpl.invoke(BasePersistenceContextProxyImpl.java:101)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.invoke(TransactionalEntityManagerProxyImpl.java:77)
at weblogic.deployment.BasePersistenceContextProxyImpl.invoke(BasePersistenceContextProxyImpl.java:87)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.invoke(TransactionalEntityManagerProxyImpl.java:18)
at $Proxy260.createNamedQuery(Unknown Source)
at oracle.oats.configuration.SettingsManagerBean.getApplication(SettingsManagerBean.java:388)
at oracle.oats.configuration.SettingsManagerBean.lookup(SettingsManagerBean.java:139)No problem :-) Happy to hear that you fixed it.
BTW, there is a tool provided with OATS (Database Configuration Tool) allowing you to review/reconnect to the database. I didn't think about it at first but this is a good idea to try that one next one you (or someone else) faces the problem.
Database Configuration Tool: <oats_install>/bin/DbConfig.sh
Some other useful tools:
Create Support Package: <oats_install>/bin/oats_support.sh
OLT Agent Authentication Manager: <oats_install>/jdk/jre/bin/javaw -jar <oats_install>/agentmanager/AMAuthManager.jar
Restart OATS App Service: <oats_install>/bin/restartSvc.sh [OracleATSServer | OracleATSAgent]
Stop OATS App Service: <oats_install>/bin/stopSvc.sh [OracleATSServer | OracleATSAgent]
JB -
Possible to use BI Server ODBC on other machines?
The BI Server has an ODBC connection to the repository file - is this possible to install on other Windows machines so as to access the tables in the RPD?
I've tried the server install file but it doesn't give me an option to install only the driver.thejame wrote:
The BI Server has an ODBC connection to the repository file - is this possible to install on other Windows machines so as to access the tables in the RPD?
I've tried the server install file but it doesn't give me an option to install only the driver.This is not correct. The BI Server has no ODBC connection to the RPD. Have a look at diagram on page 16 of the deployment guide:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b40058.pdf
The RPD is a file. The BI Server open this file and reads it. Nothing else happens. What exactly do you want to do?
http://www.catb.org/~esr/faqs/smart-questions.html#beprecise -
Simple file server accessible remotely with managed access. Do I need ML Server for this?
Hello,
I have a Mac Mini that will be dedicated to serving 15 folders of documents to 7 people. It would be great if each person had their own password and I'd like to be able to decide what folders each user will have access to. The people need to be able to access the files from home and on the office network.
Do I NEED to run OS X server for this Or can i accomplish this in OS X?
I have to get this running quickly and I may not have time for the ML Server learning curve (even though it has been simplified).
I tried to get ML server running on my machine a few weeks ago but got stuck. If setting up ML server with JUST the file server is dramatically easier I will try again. Can anyone please suggest a tutorial that takes me through simply setting up a remotely accessible file server with managed access with ML Server?
VOS X client can serve files to remote clients, via both SMB/CIFS and AFS; via the Windows and OS X fiel services. That's cheap, uses hardware you already have, and works fine.
Most NAS boxes don't do distributed authentication. Typically, you have credentials for the box at most. Some of the mid- and upper-end boxes do offer distributed authentication, but that means having that authentication around. At the low end, an Apple Time Capsule is a reasonable NAS box, and you can add an external disk. And can be used for backups via Time Machine, too. The mid- and upper-end boxes from Synology have a reputation for capabilities and flexibility. There are (many) other vendors.
I'm not a huge fan of LogMeIn for various reasons that I won't get into here, but that service does work for accessing hosts. I don't know if that allows access to NAS directly, but I'd tend to doubt it. You'd need to check with both LogMeIn and with the specs for whatever NAS box you're using.
Given the choice, I'd use a VPN.
Using a VPN does mean you can control — at the VPN level — who can access your private network, so that can provide a broad-brush form of access control to your NAS device or your OS X client or your OS X Server box, if you go that route.
I don't prefer to openly serve files to the internet, as the underlying protocols have occasionally had security issues and vulnerabilities, and the internet gremlins will find and will poke at any open ports and any accessible file servers. I prefer to configure these services via VPN.
VPNs are also more involved to set up, where LogMeIn can be simple.
As mentioned previously, I'm also not a huge fan of the host-based VPN servers in OS X, though those do work. The gateway boxes I've been using in the last year or so are probably not a good choice for a user that isn't familiar with networking — the boxes provide a user interface that very definitely expect the user to understand IP and routing and related, but is both self-consistent and quite powerful — and they're cheap for what they can do, and they do work nicely. ZyXEL ZyWALL USG series. If you are evaluating any of these firewall boxes, then I'd definitely encourage downloading the manuals and making sure you can understand the available information. The server-grade firewall boxes are almost inherently flexible and thus complex devices.
One of the easiest ways is to work with somebody that does this sort of thing to sort through the options and requirements and trade-offs available here, and potentially to set up your VPN or NAS or server configuration for you. (Disclosure: I offer this.) -
How DNS Server works with workgroup machines
Hi All,
I have 1 AD with DNS Server and few machines are in workgroup. I have given my network IP to this machines including Primary, Alternate DNS Server. I am able to use ping -a command to resolve IP address to Computer Name. I have tried to search this workgroup
machines DNS entries on DNS Server but no use.
Please suggest how to check this records & clear stale records
Thanks & Regards,
Amol BhosaleHi,
When you join a computer to a domain, the Primary DNS Suffix is automatically configured, which matches the name of the AD DNS domain name, which should also be identical to the DNS zone name. However, workgroup computers normally do not have a Primary
DNS Suffix, unless you’ve already manually configured all of them.
I assume that you didn’t configure the Primary DNS suffix for the workgroup computer, right? That would be the reason that there is no DNS record for the workgroup computer in DNS server.
Please manually
add the primary DNS suffix on the client and check “Use this connection’s DNS suffix in DNS registration” on the workgroup computer in Advanced TCP/IIPv4 Settings, then change the Dynamic Update type to “Nonsecure and secure” in DNS.
If that workgroup computer is DHCP enabled, you can also use DHCP server to force register all leases by following Ace’s article below:
DNS Dynamic Updates in a Workgroup
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Has anyone installed Oracle VM Server on Sun X4600 machines
Hi,
I am having problems with Oracle VM Server on Sun X4600 machines with 8 dual-core AMD opteron 8220 processors and 32 GB ram. The repository is on a shared LUN over two Emulex LPe11000 HBA's.
My problem is basically that dom0 reboots when I power on certain guest installations. I have succesfully installed EL4U5 guests after setting the irqpoll in grub.conf of dom0. But I am unable to complete an installation of for example EL5U1 or some of the templates available on the Oracle web site. Half way through the installation or when I power on the template the dom0 reboots.
Has anyone experiences with Oracle VM on these machines or similar hardware ?You can download RedHat advance server from following site.
This is only for oracle internal use.
http://tintin/oralnx/oralnx.html
Go to Download section.
Click on RedHat Advanced Server 2.1 and go to 2.1-Gold-CD.
This has five CD CD 1to 3 for server install. 3 and 4 has all source rpm. 5 is doc cd. checksum file has checksum for all 5 CD.
If you have any question let me know.
Maybe you are looking for
-
Hi, I am trying to connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor. I am not having a lot of luck. My machine: OS: Mac OS X Lion 10.7.4 (11E53) Graphics Card: NVIDIA GeForce 9400
-
Is there a way to use the itouch as disk drive? My old ipod would show up as a drive in My Computer but this one doesn't. I have it set to manually sync so I can use it on my 2 home computers and my work computer. I've been going back and forth betwe
-
Multiple Offline Images in PSE 10 Mac
Hi there, I am using PSE 10 on Mac, never used prior versions so no risk of mix up there. I have always added my photos using the Organizer, and backed up my catalog to an external drive. Have never deleted or moved photos using anything other than t
-
Help please. I am on my final warning before automatic update to Fx12 but I do not want Fx12. I want to remain on the superiour 3.6.28 How the heck can I stop it from changing. If there is no way to stop it then for me it is bye bye Firefox and hello
-
I'm in Europe but can't upload pictures from iphone5C to mac. I have turned off cellular and notifications to avoid roaming charges. What do I need to do?