Equipment BOM query

Dear All,
After maintaining equipment BOM , i think we are only
able to issue (BOM Maintained)material against the
Maintenance Order but its not happening.?? ? i think i
am missing some customization, is it?.
Plz guide, n do tell me main benefits of maintaining
Equipment BOM.
Thanks a ton

Deepak,
A BOM is used in PM to assign spares for a technical object. BOM provides you  an overview of all components that make up an Equipment . The BOM is also used for material planning, and you can perform material planning when creating a maintenance task list or Work Order.
When you create a work order with an Equipment as reference object, you can access its BOM from the order component screen and assign an item to the order. The system generated material reservation/ PR based on the item category.
If you can elaborate your problem a bit more in detail I may be able to provide more specific answer.
Hope it helps.
Thanks,
PJ

Similar Messages

  • Tables or Logical database to create standard report for Equipment BOM?

    Dear All
    My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock quantity,storage location of stock,description of component,price of component,Pending PR of component(if any),Pending PO of component(if any) etc
    I want to develop the report with standard infoset query instead of going for abap development.is there any logical database to map the report or what tables can i use for table joins??
    Required sample report with fields as below
    BOM Component
    Stock available/Not available indicator
    Description of Components
    BOMQty/ UOM
    Price
    Part Number
    Plnt
    Sloc
    Stock Qty
    Bin
    Pending PR
    Pending PO
    1000001121
    YES
    BEARING
    NO
    2000
    ERS22
    1000
    MECH
    4
    A1
    300012431
    Regards
    M.Manojkumar

    Manoj,
    The following is the tested solution.
    Table join
    Output
    This figure shows the case of a Equipment BOM where 3 components are there. Installed Quantity are 4, 1, 1 respectively. Last two columns are showing the Storage Locations and the Stocks available.
    Fields taken to output are
    From STPO : IDNRK MENGE MEINS
    From MARD  LGORT LABST
    As said before, more than this you can not do in SQVI. With this basic join in SQ02, using codes in Extras you can do much more.
    Jogeswara Rao K

  • Equipment BOM & Function Location BOM

    Dear All,
    We  are created functional location BOM and we are  created Functional location order.In that order i found the  Equipment BOM which are linked with functional location.I assigned functional location BOM as well as Equipment BOM items for that order.It will take the items.In Functional location order Equipment BOM items should not take.
    Pls.Help me.

    Hi Srinu,
    Your query is not clear.
    Normally when your creating the maintenance order for Functional location. if this FL is having the BOM you will get the this BOM during the material planning in that order.
    if your creating the maintenance order for Equipment. if this Equipment is having the BOM you will get the this BOM during the material planning in that order.
    If there is no BOM you can plan the Material from the list also.
    Regards
    Venkat

  • Error while creating equipment BOM (IB01)

    hi guys,
    while creating equipment BOM (IB01) i am getting this error, while adding components.
    'Material type NLAG cannot be used with item category (plant 1000)'.
    regards
    chinta

    HI Chinta,
                                   I understood ur problem IB01-give the equipment number which is generated by the system and give plant name in which you have created the equipment and bom usage as 4 (plant maintenance) and press enter.
    Then you will get the components list give the description,quantity and item category as:
               as you gave it as L it is throwing an error give it as N(Non stock item), then you wont get the error.while selecting the item cat. you will get differnet components and you select the appropriate one based on you equipment.Hope you issue is resolved.
    Regards,
    Bharat

  • Item category in equipment BOM ?

    hi all,
    how could i chose the item category of a component while creating equipment BOM.
    how do i know weather it is of 'L' of 'N' or any thing else.
    regards,
    chandra

    Hi
    Item category L- stands for stock items i.e. for these items you normally maintains stocks.
    N- is Non stock item i.e. when you use it in BOM its for idication only. However when one creates order & assigns components of item category N, it trigers a PR for immediate procurement. So check with your business requirement.
    Regards
    Shakti

  • Function Module for creating Functional Location BOM and Equipment BOM

    Hi All,
    Is there any function module for creating and changing Functional Location BOM and Equipment BOM ???

    Hi,
    Tables for Eq., BOM: EQST, STKO, STPO.
    Tables fro Fun., Loc., BOM: TPST, STKO, STPO.
    You can use FMs: CS_BOM_EXPL_TPL_V1, CS_BOM_EXPL_EQU_V2 & CS_BOM_EXPL_MAT_V2 for extracting the appropriate BOM related data.
    And for the Alternatives please check the customizing or check with your respective Module experts for the appropriate configuration.
    Hope this helps.
    Best Regards, Murugesh AS

  • Tcode for Equipment BOM list

    Hello,
    1. What is the Tcode to see Equipment  BOM list ?
    2. How to see a particular ERSA material is used in how many Equipment BOM
    Thanks
    Prasad

    As described above, there isn't a BOM list as such.
    However, you could look at the Equipment BOM Logical Database (CEC) via TCode SE36
    This Logical Database can also be used in TCode SQVI or SQ01
    PeteA

  • Deletion flags for equipment BOM

    Hi,
    In equipment BOM header , there are 2 fields for deletion flag :
    -one is set manually (the one on the right)
    -the other set by the system (the one on the left).
    Can someone explain to me how deletion flag indicator (on the left) work?
    Thanks,
    P.

    Hi,
    To explain this i must say first there is a difference in the Deletion Flag (Right in Header) and Deletion Indicator(Left in Header).
    In SAP term The deletion Indicator shows the item which has already been Deleted from the System and Deletion flag shows that the record has been flagged for deletion and will hence be Archieve (when, depends on the Archieving strategy followed in the company).
    To explain the affect these will have is the Deletion Indicator will not allow you to use the and will show the error as the object has been deleted and is not in the system.
    Deletion flag for BOMs
    Indicator: this BOM will be archived during the next archiving run and, if necessary, deleted from the data base.
    Where as the Deletion Flag will show that the object is ready to be archieved and is set to be deleted.
    Deletion Indicator
    Indicator showing that the BOM header or the BOM item has been deleted with reference to the change number.
    Now there is another difference in the way we can amke the objects active from deletion flag anf the deletion indicator.
    For Deletion flag you have to go to change mode and just remove or untick the deletion flag.
    For Deletion indicator you have to go to Archieve table and pull the object back in to SAP system and it will then show only the deletion flag, which can be removed by the way explained above.
    I hope this was helpful, if yes then please award points.
    Regards
    Anoop

  • Maximum Line items for Equipment BOM

    Dear Experts,
    Is there a limit to the number of line items of components we can have in equipment BOM. I am not able to add anything above 999. It doesnt show any error, but doesnot save any value after 999. Please let me if there is a work around.
    Thanks,
    Boby

    The BOM item node number STPO-STLKN is an 8 digit field therefore I would imagine that you could have a maximum of 99999999 items..
    But you could use multi-level BOMs which would allow you to organise your components better.
    PeteA

  • Equipment BOM

    Hi,all,
    I m maintaining equipment BOM for spare parts planning ,where all item category has been mentioned as "L",now from maintenance order I want to generate Purchase Requisition by changing the item category as "N" after selecting the specfic item from that equipment BOM .But  item category field of the maintenance order is coming greyed mode ?how can I change the item category from "L" to "N" to trigger PR??
    Also is it possible to create Purchase Requisition from t-code ME51N with reference to an equiment for which I have maintained BOM .Is there any field to enter equipment no from where I can retrieve the spare parts list ?Please give ur valuable suggestion how to proceed.
    thanks in advance.
    rgds
    rajib

    Hi,
    BOM item should be maintain with item category u2018Nu2019 or while assigning component to order instead of double clicking on item (BOM item) ,  Just copy the material (ctrl+c) and assign category :u2018Nu2019 and quantity manually.
    In case of second issue: You cannot create a PR with reference to Equipment and there is no field in PR to assign Equipment.  If you are having cost centers assigned to equipment in 1:1 ratio, you can assign cost center in account assignment of PR item.
    Or else you can go for a standing order that is one standing order is to be assigned to each equipment and same can be used for account assignment for procurement.
    In case of capitalization of expense you can go for asset as account assignment.
    If you are not looking for account assignment and just want to retrieve the PRs connected to Equipment then you can think of tracking no field.
    Raju

  • LSMW for create Equipment BOM

    Hi Experts,
    I have created a LSMW through "Batch Input Recording" method to upload materials to Equipment BOM.
    It caters to upload 5 materials per equipment. However if input data contains only 3 materils for a equipment then LSMW gives an Error. Have to enter 2 more materials to the BOM.
    How can i overcome the matter?
    Is there any other method that i can follow to upload the Equipment BOM?
    Thanks in Advance

    Hi,
    Use standard Object
    0030 Object
    0001Method
    main Structure  : BOMHEADER
    Sub Structure : BOM item
    BOMHEADER                 BOM header
        EQUNR                          C(018)    Equipment
        WERKS                          C(004)    Plant
        STLAN                          C(001)    BOM Usage
    BOMITEM                   BOM item
         EQUNR                          C(018)    Equipment
         POSNR                          C(004)    Item (SD)
         POSTP                          C(001)    Item Category
         IDNRK                          C(018)    Component
         MENGE                          C(013)    Quantity
         MEINS                          C(003)    Base Unit of Measure
    In Field mapping and conversion rule Maintean TCODE as constant IB01.
    Create Logical and Physical path during specify files under Converted Data.
    It will create Equipment BOM
    Regards,
    SandeepV

  • LSMW for equipment bom kde

    Can someone please specify the steps required to create an equipment bom lsmw

    hi Alagasen
    why don't you use standard object "create material BOM",change the transaction code from CS01 to IB01
    and do the mapping and upload
    regards
    Seenu

  • Purchasing Group in equipment BOM ( Item level)

    At the time of creating equipment BOM , purchasing group in equipment BOM (item level ) will be in sync with material master purchasing data.
    When we change purchasing data (Purchasing group) in material master at that time system will not change purchasing group in old equipment BOM's at item level. Is there any standard method to maintain purchasing group in old equipment BOM in sync with purchasing group in material master data (System ECC 6.0 ehp5)
    Thanks and Regards,
    Pankaj

    Thanks for reply Peter ,
    Because of this issue wrong information is flowing to PR (when component selected from equipment BOM in work order).
    Is there any negative impact if I will remove purchasing group at BOM item level ?
    I did analysis for this and found no negative impact on PR , still looking for expert advice as client is not looking for any core modification.
    Thanks and Regards,
    Pankaj

  • By default vendor in equipment BOM

    Hi,
    In equipment BOM's non stock (N) component item data, in purchasing tab, can I make vendor bydefault. It is client's requirement
    Jayesh

    Thanks Dev
    I have tried for default vendor setting in info record condition tab but not able to do that. In info record if I try to add condition type ZDUT, system gives below error "condition type ZDUT is not in procedure A M RM0002". I checked in possible entries and condition type ZDUT is not available.
    I have checked vendor master and the vendor schema group IV is assigned to the vendor. This schema group for vendors IV is defined in the system. Also calculation schema ZIMPOR is attached to IV. Also condition type ZDUT is available in ZIMPOR.
    Why system is not allowing me to add condition type ZDUT in info record and why system is calling RM0002 procedure in info record. What do I need to do for this default vendor setting?
    Please guide me.
    Thanks & regards’
    Manoj Gupta

  • Equipment BOM & Plant assignment

    Dear All,
    My client having two Maintenance Plant which is 1001 & 1002 & having one planning plant which is 1001.
    Here 1001 plant executes the maintenanace of 1001 & 1002 plant.
    Actually we have created one Equipment in plant 1002, so its maintenance plant is 1002 & its planning plant is 1001, in this condition when i am going to create Equipment BOM through tcode IB01, then which plant needs to be assigned to that Equipment BOM.....1001 or 1002 ??
    Thanks & Regards,
    Sandeep

    Sandeep,
        As equipment has been created in Plant 1002, in equipment BOM creation, plant should be 1002. Equipment BoM definition plant would be based on the equipment location.
    Hope this will help you.
    Regards,
    Maheswaran.

Maybe you are looking for

  • Updating database table based on BAPI response in case of error

    Dear Experts, My scenario includes pulling records from database stagging table, and push one record at a time to BAPI_ALM_NOTIF_CREATE. I am using sender JDBC adapter(with select query and update query to mark records as processed). My question is :

  • Why are there 2 versions of same song in Itunes folder

    Hi, Itunes is not showing double songs in the player, but when I go to the folder where the .m4a files are located there is both a "song.m4a" and a "[00g.....]song.m4a".  Some folders have this and some don't.  Why?  Also, some folders have "AlbumArt

  • X-axis tick marks and labels

    Is there a way I can apply a vertical orientation to the x-axis labels on a chart?

  • Cant find my i cloud icon maybe deleted

    can i retreive my icloud that came with my imac or do i need to download another    i may have deleted the icon   I dont see  icloud in system prefeences

  • Service for Object attacchements database

    Hy guys, does anybody know where SAP stores(i mean dictionary.....) attacchements by "Service for Object functionality" ? i need to develop a custom program.............. thanks a lot. Cheers.