Equipment Category number range shortclose
Dear Gurus,
i want to short close (ie close the the current number range ) and want to assign a new number range for the existing equipment category. How can I do it. The existing numbe range is External numbe range type.
Plz throw me some light on it. I
Rgs,
Pravs.
Dear Sathees,
Thank ylu for you reply. I changed to new number range. But thing is that , the older range exists and retriving when I was checking in the IE03.Now I have two problems..
1).The new format which I have given with etrernal range, system is taking any format rather specified format. But range it is checking accurately.
2) If any sales return is there for the older format equipment, how to process that with the new format.
Plx help me in this.
Rgs,
Pravs.
Similar Messages
-
External number range for equipment number
Hi All,
How to maintain external number range for equipment number?( t-code IE01)
Thanks in advance,
SoumyenduDear ,
Go to...
spro -
pm/cs -
master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
Regards,
Ishwar -
Problem in number range assignment to equipment category
Hi Gurus,
I have created equipment categories & now want to maintain no. range for them. But by mistake i have assigned the categories to standard no. range group (PM) .Now i want to reverse it by deassigning to its original place.Please suggest me the way how i can do it so that i can create a new no. range group & assign equipment categories there.
Also to activate the check box for external number range i am not able to activate or deactivate the check box.Please suggest for this problem also.
Regards,
VivekDear,
For deassigning to it's orignal place
Select the category
Press the select element or F2
Select the Not Assignt (at bottom of the screen)
Press the Element/Group or F5
For creating a new no. range
Select Group at Menu Bar
Select Insert
Now give he Text and give the no. range
u can not activate or deactivate External check box. See there are two lines if u want to give external no. range then assign the no. range at second line where external no. range check box is already activated.
Regards
Sunil -
Alphnumeric External Number range for Equipment category
Hi,
Is there any other option that I can restrict length of external alpha numeric number range except that exit IEQM0003? This exit only applicable or restrict when you save the equipment.
Requirement is like external number range should be like AAA-000 to ZZZ-999. System must not allowed any other equipment number which is out of this range. ( must be 7 character)
As far as my understanding , system use string comparison once you use alphanumeric number range and you can create equipment with 18 char length except special character if above range is maintained.
Please correct me if i am wrong and suggest.
Thanks
Anish AhyaHi Zenith,
Its not available in Standard SAP, please use the user exit and tell the ABAPER to check the Equipment numbering (count) before entering into Creation screen. In IE01,entering equipment Number, Category and date after completion of this activity when we enter continue icon there u can put a condition to check the length of equipment number. I implemented that user exit and i got the result. its working fine. User Exit: IEQM0003.
regards
Jalu -
Plant specific equipment number ranges
Hi,
Is there ay possibility to maintain plant specific Equipment number ranges,kindly suggestNaveen,
Equipment number ranges are defined at client level. Probably what I could suggest is to create new equipment category for different plants and for that you can assign different number ranges.
Regards,
Prasobh -
Some external number range are not valid for equipment creation
Hi All,
What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
Waiting for your valuable inputs..
Thanks
SuryaHi
As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
Regards,
Rakesh -
External Number Range setting for Equipment Not working
As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara RaoHi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not. -
The external number range for Equipment master
Dear Experts,
My client has requirement to use KKS code as Equipment number as they want to create Notification and Maintenance order using the KKS code.
For example 10H, 10BEB, 20BHB04, 10LBG10AA001, 10HLA13AA001A, 10ETG10AN001-E etc.
All these KKS codes has different character length hence it's not fit in any number range.
can anyone suggest the external number range that I can use for above requirement?
Thanks.Parag,
I have checked again. It is working correctly. Remember that the following setting the check box below the column A should be empty. This allows Alphanumeric characters in the numbers.
SPRO Path to above setting
My Equipment category of External Numbers is 'A'.
KJogeswaraRao -
Equipment Number Range Clarification
Hi,
I have defined the below number range as Creation of Equiment Master (Txn. IE01) for Category Q / Z.
AAA-0000-AAA ZZZ-9999-ZZZ
During creation, I would like to change the number as like EDP15890UYT. Can I use the below user exit for the same. If so, can you please pass the code.
IEQM0003 -> EXIT_SAPMIEQ0_001
Regards,No need to write any logic on this exit.
-
External number range in equipment
Hello!
I want to create a number range in equipment which contains letters, numbers, symbols.
For example equipment numbers like:
A125D-6
1-DSDV
tHANK YOU!Hi, if you pres F1 help in OEIN it is written:
"External intervals can only contain either letters or numbers, as sorting can differ between platforms (Code page):
Allowed: 000001 to 999999
AAAAAA to ZZZZZZ
Not allowed: AAAAAA to 999999
So it looks like either leters or numbers but not both.
However you can ask also in Plant Maintenance forum
Best Regards, Peter -
Assign Product category to number range group
Hi,
I have defined an product Category in CRM .. COMM_hierarchy.
when i open the tcode COMCMATERIALId..
i am not getting the new product category in the non-assigned elements to assign the category to the number range..
thanks..
DineshDear Rajprabhu,
Please follow the link.
Re: how to transport number range
Hope this is clear
Thanks & Regards
Kundan Kumar -
Any FM for create an external number range for equipment number ????
Hi all,
Any FM for create an external number range for equipment number??????
thanks & regards
indu.Hi
you can use below FM to get number range
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = 'Z1'
object = 'ZTEST'
object = 'ZFIREC'
quantity = '1'
subobject = p_compcd
toyear = p_fisc
IMPORTING
number = v_seqno.
thanks & regards,
bhupal. -
Dear All,
Is there any exit available for configuring alphanumeric internal number range for equipment.
My client requirement is equipment should generate alphanumeric number internally.
Thanks in advance
JohnsonHi Johnson
I dont think we can achieve the Internal Alphanumeric Number Range for Equipment
The Alphanumeric no range has to be set externally where either a User or an External System can assign the number
Regards
Jignesh -
Gurus
In OIEN; i have kept number range as xxxx-yyyyyyyyyy (4110)
But i can create equipement upto 18 characters without any error / block. Why?
I want system should give me error when number range is more than 15 characters but currently i can create upto 18
Please let me know what needs to be done so that system checks this number range
RegardsHi Paul
Thanks for replying. Unfortunately i could not interpret what you are trying to say
Can you please elaborate? What should i do so that system will not allow me to keep more than 15 characters in number range for equipement??
Hi Atul
Does it mean that i should keep upper limit also? It should also be 15 characters??
Please reply
Thanks again
Regards -
Differentiating the orders in SNP based on number range but same category
Hi,
There is temporary requirement where we need to exclude planning for certain type of STOs/ASNs from heuristics planning. The categories are same i.e. SAP std categories but number range is different and originating plant is different. We can say that i want filter out the STOs and ASNs originating from particular plant.
Is there any other way than to exclude it from CIF (will have to use user exit) OR through macro functions?
Appreciate your thinking time for this.
Regards
AlhadHi Srinidhi
Thanks for reply.
I want the material to be planned for in APO SNP but only wish to exclude orders to be seen in planning book e.g.
there is one STO starting with number range 45* and other is starting with 65. I would like to exclued them to be seen in planning book. (both have same categories). Only difference between them is 65 are from one specific location.
This is again a temporary requirement where the stock transport orders and ASNs are not clean and cleaning process is in progress.
Again, thanks for your time.
Regards
Alhad
Maybe you are looking for
-
How do I transfer Keychains from one mac to another mac?
I recently got a new imac. I choose during the set-up process for the new imac to pass on pulling "all" the old information from my old G4 mac as there was stuff I just did not want to move and then have to find and delete on the new mac. However I w
-
For the past couple of weeks I've been having this issue. Everything works fine all morning, and then mid-afternoon, Mozilla goes haywire and I get an "unresponsive plugin" error message, telling me Shockwave Flash "has stopped responding". It derail
-
Mac Pro (early 2008) - a series of problems
Like many people here, I've been hit with a series of Mac Pro (early '08) issues. I've had the machine for a little over a month and I love it when it's working. But recently, the aforementioned "series of problems" has arisen - ATI graphics card fre
-
How to send e-mails containing non-english characters
Hi, I would like to send email using JavaMail, but I have a problem with sending non-english Characters. How to change/use different charset? What should I do to send non-english chars? thanks!
-
Microsoft Wireless Notebook Laser Mouse 6000
I bought one of these for my Macbook: followed the install steps and nothing. No laser light, no control via the mouse. Any ideas?