Equipment class assigning with equipment

Dear PM experts,
I have created characteristics and class for equipment under class type 002. While assigning the class to equipment master system throws a message that "No assignment find for class type 002". What is missing.
Is any configuration is required for assigning the class with the equipment? . Pls let me know the solution.
Thanks in advance.
Chandru

Hi Chandru,
Check in the class whether you have assigned the charecteristics or not?
the process is like this.
first you create a Class with type 002, say Motor
Then Create the charecteristics for the Motor in CT04, it would specs of the motor, like capacity, Current required etc..
Then assign these Charecteristics to the classs motor in CL02.
Now assign this class to the Equipment master.
Regards,
Praveen,

Similar Messages

One material type assign with multiple valuation class

Dear All,
One material type assign with the multiple valuation class.it is possible.what is defuclty for that.
pls, explan.
Regards,
Ranjeet

Hi,
ABC 3040 - spare mach BSX ( G/ L )- Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3040--G/L account
XYZ 3041 - spare mach BSX ( G/ L )-Goto OBYC and double click on the transaction key BSX and enter your chart of account proceed
val modifier(0001)-val class 3041--G/L account
ABC 3040 - store consumable GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3040-G/L Account(cr)-G/L Account (Dr)
ABC 3040 - repair and maintanance GBB ( G/ L )-Goto OBYC and double click on the transaction key GBB nter your chart of account proceed
val modifier(0001)-Account modifier VBR-Valuaiton class 3041-G/L Account(cr)-G/L Account (Dr)
Regards,
Deepak.

Table class interface to replace Not assigned with blank

Hi,
I have some of the values for characterstic as Not assigned I wan to replace it with blank in my webreport
when I want to replace #with blank I have written the following code
In method CHARACTERISTIC_CELL I have written th following code
IF I_CHAVL EQ '#'.
    replace '#' with '-' into c_cell_content.
    replace '#</a>' with '-</a>' into c_cell_content.
ENDIF.
but when I wan tot replace Not assigned with blank witht the following code its not working
IF I_CHAVL EQ 'Not assigned'.
    replace 'Not assigned' with '-' into c_cell_content.
    replace 'Not assigned</a>' with '-</a>' into c_cell_content.
ENDIF.

See SDN-thread "Re: Remove 'Not assigned" in which you should modify the text elements in SAPLRRSV
(do not know, if this works; it is a modification which affects the whole system).
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:18 PM

ATM model with Servlet and Cookies(class assignent)

i am struggling starting a class assignment. I am suppose to use and access database, a servlet and cookies. If i understand correctly the servlet will have the buttons and GUI? What would i use the cookies for? or how would i use cookies in such an application? Please help.
ty,
max

A servlet will typically generate HTML content. The generated HTML will contain tags which will be rendered into buttons and the like. Cookies are used for persisting state about a particular web browser across several sessions. For example, if a user enters their name in your system you could set a cookie (which would be stored on the client's machine). Then, when they return to the site you can re-access the cookie which was originally set.
Good luck,
-Derek

Error in Class Assignment in Pool Asset Managment

Hello Team,
I am facing problem in IW21 during creation Notification type MF which is used for Pool Asset Management. if possible give me solution
After Click on Equipment below window will open
and in this window if i do next, no processing will happened. If i wish to save this notification system will give error Like Error in Class Assignment.
I checked entries in PAMS_FSET table also.
Thanks and Regards,
Sweta

Hi , Please check whether class PAM is defined for class type PAM in CL02 . If it is not defined please maintain some characters in it.
Regards,

Batch Class Assignment

Dear All,
I have created a material with batch management & i have assigned a Class of type "023" in the classification view.
When i open the same material again there is no class assigned to the material.
this is happening to all materials.....
plzzz guide
Cheers

Hi,
Refer below thread which is similar to your problem,
[Class not assgin|Re: Batch class assignment on a material]
Regards,
Dhaval

MIGO Error - Account 6500029 requires assignment with CO object

Hi Experts,
I am facing problem with new material code opened recently. Valuation class assigned is ZSTD.
At the time of GRN, It is giving an error msg :
Message no. KI235. Account 6500029 requires assignment with CO object.
Kindly note I am not making an account assignment P.O. It is a normal P.O.
Previously also with same valuation class, we have received no. of materials with out any error.
It should post the material to my inventory account 1220000 as it did with materials of the same valuation class earlier. I don't know from where it is picking GL 6500029.
Kindly help.
Regards,
Rajneesh Gulati

Hi ,
In OBYC kindly check the Key BSX for the GL account assingment to the valuation class .
As inventory accounts are Balance sheet accounts and do no require an assingnment to a cost element .
If your account is getting changed then check the same in OBYC - BRX .
Regards ,
Dewang T

Simple class Evolution with DPL fails.

Hi
I added a simple integer field to an existing class, used with DPL and during startup next time get this error. From the documentation, this type of class evolution should work automatically. But I get following exception. Does it require some extra configuration? I cant seem to locate that in the documentation.
com.sleepycat.persist.evolve.IncompatibleClassException: Changes to the fields or superclass were detected when evolving class: com.pkg.TestClass version: 0 to class: com.ul.users.UserProfile version: 0 Error: A new higher version number must be assigned
at com.sleepycat.persist.impl.PersistCatalog.<init>(PersistCatalog.java:338)
at com.sleepycat.persist.impl.Store.<init>(Store.java:172)
at com.sleepycat.persist.EntityStore.<init>(EntityStore.java:148)

Hi,
The exception message "A new higher version number must be assigned" means that you have to explicitly specify a version parameter in your Entity or Persistent annotation.
This is explained in the com.sleepycat.persist.evolve package description here:
http://www.oracle.com/technology/documentation/berkeley-db/je/java/com/sleepycat/persist/evolve/package-summary.html
--mark

Map data from class CL_PT_REQ_WF_ATTRIBS with workflow

Hi All,
I am using the standard class CL_PT_REQ_WF_ATTRIBS with DUMMY method for approval workitem which uses webdynpro ABAP. The webdynpro person is passing one variable RESULT after the approval, and RESULT with its value is shown in the log but there is no workflow container element named RESULT in the workflow. so, I created one with that name. But when I use this vaiable in the task after mapping, it is not showing any value. Am I missing something or doing anything wrong?

Hi
After creating the container element in Approve Leave request Task did you try to refresh the buffer and Refresh Org assignement.
And also make sur ethat the webdynpro developer is writing back the decision to Approve Leave request Task
and also make sure you do a proper bidning between Task container to workflow container. Check in the workflow log whteher in atleast the task container the value is populate. Also please let us know how the webdynpro developer is assigning the result value is it something like he is using SAP_WAPI_WRITE_CONTAINER function module then make sure that the container element is CAse Sensitive. so ask him to define as you decalred in the task/workflow container.
Regards
Pavan
Edited by: Pavan Bhamidipati on May 17, 2011 2:18 PM
Edited by: Pavan Bhamidipati on May 17, 2011 2:18 PM
Edited by: Pavan Bhamidipati on May 17, 2011 2:19 PM

Error while trying to create new assignment with supervisor through API

Hi Experts,
I'am trying to create new assignment with supervisor for employee, but i'am facing this error:
=============================================================
ORA-20008: Error While Create new assignment..-20001
ORA-20001: The supervisor assignment that you have entered is invalid.
Please check that you have entered the supervisor,
that the supervisor assignment belongs to this supervisor and that the assignment is effective.
ORA-06512: at line 198
=============================================================
This is my script, (Oracle EBS 12.1.1)(DB 11):
DECLARE
v_user_id NUMBER;
v_res_id NUMBER;
v_res_appl_id NUMBER;
v_org_now_no_manager_warning BOOLEAN;
v_spp_delete_warning BOOLEAN;
v_other_manager_warning BOOLEAN;
v_tax_district_changed_warning BOOLEAN;
v_entries_changed_warning VARCHAR(4000);
v_person_id per_all_assignments_f.person_id %TYPE;
v_business_group_id hr_all_organization_units_tl.organization_id %TYPE;
v_people_group_id per_all_assignments_f.people_group_id %TYPE;
v_object_version_number per_all_assignments_f.object_version_number %TYPE;
v_special_ceiling_step_id per_all_assignments_f.special_ceiling_step_id %TYPE;
v_group_name pay_people_groups.group_name %TYPE;
v_ass_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_start_date per_all_assignments_f.effective_start_date %TYPE;
v_effective_end_date per_all_assignments_f.effective_end_date %TYPE;
v_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_sup_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_supervisor_assignment_id per_all_assignments_f.assignment_id %TYPE;
v_job_id per_jobs.job_id %TYPE;
v_grade_id per_grades.grade_id %TYPE;
v_location_id hr_locations_all.location_id %TYPE;
v_payroll_id pay_all_payrolls_f.payroll_id %TYPE;
v_pay_basis_id per_pay_bases.pay_basis_id %TYPE;
BEGIN
v_user_id := FND_GLOBAL.user_id ;
v_res_id := FND_GLOBAL.resp_id ;
v_res_appl_id:= FND_GLOBAL.resp_appl_id;
FND_GLOBAL.apps_initialize(v_user_id, v_res_id, v_res_appl_id);
BEGIN
SELECT organization_id
INTO v_business_group_id
FROM hr_all_organization_units_tl
WHERE name = 'Vision University'
AND language = 'US';
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,'Error While Retrieving (Business Group ID) Info...'||SQLCODE||' '||SQLERRM);
END;
FOR R IN (SELECT * FROM xx_assignment) LOOP
BEGIN
SELECT assignment_id , ass_f.object_version_number
INTO v_assignment_id , v_object_version_number
FROM per_all_assignments_f ass_f, per_all_people_f p_f
WHERE ass_f.person_id = p_f.person_id
AND ass_f.business_group_id = p_f.business_group_id
AND ass_f.business_group_id = v_business_group_id
AND p_f.employee_number = R.employee_number
AND TRUNC(p_f.effective_start_date)= TRUNC(ass_f.effective_start_date)
AND TRUNC(p_f.effective_end_date) = TRUNC(ass_f.effective_end_date);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20001,'Error While Retrieving (Assignmet_ID) for employee..'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT job_id
INTO v_job_id
FROM per_jobs
WHERE trim(lower(name)) = trim(lower(r.employee_job))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20002,'Error While Retrieving (Job_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT grade_id
INTO v_grade_id
FROM per_grades
WHERE trim(lower(name)) = trim(lower(r.employee_grade))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20003,'Error While Retrieving (Grade_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT location_id
INTO v_location_id
FROM hr_locations_all
WHERE trim(lower(description))= trim(lower(r.employee_location))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20004,'Error While Retrieving (Location_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT payroll_id
INTO v_payroll_id
FROM pay_all_payrolls_f
WHERE trim(lower(payroll_name)) = trim(lower(r.payroll_name))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20005,'Error While Retrieving (Payroll_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT pay_basis_id
INTO v_pay_basis_id
FROM per_pay_bases
WHERE trim(lower(pay_basis)) = trim(lower(r.pay_basis))
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20006,'Error While Retrieving (Pay_Basis_ID) Info...'||SQLCODE||' '||SQLERRM);
END;
BEGIN
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20007,'Error While Retrieving (Assignmet_ID) for supervisor..'||SQLCODE||' '||SQLERRM);
end;
BEGIN
hr_assignment_api.update_emp_asg_criteria(p_effective_date => TRUNC(SYSDATE),
p_datetrack_update_mode => 'CORRECTION',
p_assignment_id => v_assignment_id,
p_validate => FALSE,
p_called_from_mass_update => NULL,
p_grade_id => v_grade_id,
p_position_id => NULL,
p_job_id => v_job_id,
p_payroll_id => null,--v_payroll_id,
p_location_id => v_location_id,
p_organization_id => v_business_group_id,
p_pay_basis_id => v_pay_basis_id,
p_segment1 => NULL,
p_segment2 => NULL,
p_segment3 => NULL,
p_segment4 => NULL,
p_segment5 => NULL,
p_segment6 => NULL,
p_segment7 => NULL,
p_segment8 => NULL,
p_segment9 => NULL,
p_segment10 => NULL,
p_segment11 => NULL,
p_segment12 => NULL,
p_segment13 => NULL,
p_segment14 => NULL,
p_segment15 => NULL,
p_segment16 => NULL,
p_segment17 => NULL,
p_segment18 => NULL,
p_segment19 => NULL,
p_segment20 => NULL,
p_segment21 => NULL,
p_segment22 => NULL,
p_segment23 => NULL,
p_segment24 => NULL,
p_segment25 => NULL,
p_segment26 => NULL,
p_segment27 => NULL,
p_segment28 => NULL,
p_segment29 => NULL,
p_segment30 => NULL,
p_employment_category => NULL,
p_concat_segments => NULL,
p_grade_ladder_pgm_id => NULL,
p_supervisor_assignment_id => v_sup_assignment_id,
p_people_group_id => v_people_group_id,
p_object_version_number => v_object_version_number,
p_special_ceiling_step_id => v_special_ceiling_step_id,
p_group_name => v_group_name,
p_effective_start_date => v_ass_effective_start_date,
p_effective_end_date => v_effective_end_date,
p_org_now_no_manager_warning => v_org_now_no_manager_warning ,
p_spp_delete_warning => v_spp_delete_warning,
p_entries_changed_warning => v_entries_changed_warning,
p_tax_district_changed_warning => v_tax_district_changed_warning,
p_other_manager_warning => v_other_manager_warning);
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20008,'Error While Create new assignment..'||SQLCODE||' '||SQLERRM);
END;
END LOOP;
COMMIT;
END;
Thank you & Best Regards

I think this is essentially saying that the Supervisor Assignment is wrong or no longer effective. Looking at your SQL to fetch the Supervisor Assignment there are a number of potential issues. This is what you've currently got:
SELECT person_id
INTO v_person_id
FROM per_all_people_f
WHERE employee_number = r.supervisor_number
AND business_group_id= v_business_group_id;
SELECT assignment_id
INTO v_sup_assignment_id
FROM per_all_assignments_f
WHERE person_id = v_person_id
AND business_group_id = v_business_group_id;
Potential Problems/Clarifications
1. What is r.supervisor_number, what does it contain and how is it derived? I can't see that anywhere else in the block...
2. Is there a chance that r.supervisor_number is referencing an employee who has left, ie, now an ex-employee?
3. The SELECT statement that fetches the assignment_id does not perform any date-effective restrictions, which means you might be lucky enough to fetch the person's current assignment. But you might also fetch an old or future-dated assignment.
4. The SELECT statement that fetches the assignment_id does not restrict the type of assignment, so if this manager has applied for a job (ie, they have an applicant assignment) or some other type of non-employee assignment you might be picking that up.
This would work better for you:
SELECT paaf.assignment_id
INTO v_sup_assignment_id
FROM per_all_people_f papf
,per_all_assignments_f paaf
WHERE papf.employee_number = r.supervisor_number
AND papf.business_group_id = v_business_group_id
AND nvl(papf.current_employee_flag, 'N') = 'Y'
AND trunc(sysdate) BETWEEN
papf.effective_start_date AND papf.effective_end_date
AND papf.person_id = paaf.person_id
AND paaf.assignment_type = 'E'
AND paaf.primary_flag = 'Y'
AND trunc(sysdate) BETWEEN
paaf.effective_start_date AND paaf.effective_end_date;
If it doesn't return a row it means that the supervisor (or whatever employee is returned by r.supervisor_number) is not active as at sysdate and cannot be used. Note that this SQL only applies for employees. If you can have Contingent Workers as supervisors in your implementation then this needs tweaking.
Does that help?

Java class integration with Oracle Identity Manager 9.1.0.2

Hello Friends,
I have a java class that is responsible for sending notifications, my question is how do the relationship of this class with the Oracle Identity Manager 9.1.0.2 so you can take the class and notify users when an application is approved or rejected.
Any recommendation for this process.
Thanks for the support
Edited by: JLK on Jun 12, 2012 5:20 PM

Hi
Java class integration with OIM happen through concept of adapters. You can go through OIM documentation of how to create adapters.
In your case you should create a process task adapetrs adn attach it on the Approved response code in your approval process.
Desingn Console --> Process management --> Process definition --> <Apprlication Process Ex: AD User>.
Alternatively you can also send notification using OIM OOTB email templates.
Regards
user12841694

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Is Apple aware of this problem? No longer supported?

My web page uses a Java Applet to allow my visitors to replay chess games; the Chess Viewer Deluxe applet was written by Nikolai Pilafov some time ago and has been working properly for some time (until recently). I don't monitor this part of my site regularly so I am not sure when it began to fail. On his web site [http://chesstuff.blogspot.com/2008/11/chess-viewer-deluxe.html] he has a link to check LiveConnect object functionality (which fails for OBJECT tags). His recommendation is to "seek platform specific support which might be available from the JRE developers for your platform".
I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Until I checked the LiveConnect object functionality, I was unable to identify the source of the console error messages. This does seem to be the smoking gun.
Is Apple aware of this problem? Are these classes no longer supported? Has anyone else had this problem? You can attempt to recreate the problem locally by going to my web page: http://donsmallidge.com/DonSmallidgeChess.html
Thanks in advance for any help you can provide!
Abbreviated Java Console output:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03-384-10M3425 Java HotSpot(TM) 64-Bit Server VM
load: class ZeroApplet.class not found.
java.lang.ClassNotFoundException: ZeroApplet.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)
load: class JavaToJS.class not found.
java.lang.ClassNotFoundException: JavaToJS.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)

I just went up to check the LiveConnect object functionality page AND IT WORKED THIS TIME! I must confess, this is very mysterious. I will do some more checking and reply here if I can determine why it is working now (and more importantly, why it didn't work before).

Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, don´t work with UCCX 10.5

I have a Java Class (Compiled with JDK6_u12) that works with UCCX 9.0.2, after upgrade it don´t work with UCCX 10.5
I get the error message: "Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL.; nested exception is: javax.xml.ws.WebServiceException: Failed to access the WSDL at: https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. It failed with: Got java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty while opening stream from https://www.brightnavigator.se/brightservice/brightservice.asmx?WSDL. (line: 1, col: 47)
Does anyone know about this ?

Did you ever find a resolution to this issue? I have a similar issue after upgrading from 7 to 10.5. I have loaded all provided certificates to the tomcat-trust store, restarted Tomcat Services and still get the same error
Thanks

How to replace # or Not assigned with blank in BEx Query Output.

Hi,
While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
The requirement is to "Replace # or Not assigned with a blank" in the output.
I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
Please share your inputs on this. Any inputs on this would be appreciated.
Thanks,
Naveen

Check out SDN-thread: "Re: Remove 'Not assigned'" for more details
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM

Equipment class assigning with equipment

Similar Messages

Maybe you are looking for