Equipment, classes, characteristics, values

Hello,
I'm trying to list out all equipments that have classes assigned to them and i also want to see which characteristics and values are valid for that equipment. I want to have that in one overview.
transaction CL6BN comes very close, but i can not make a download from that transaction to excel (at least i can not find the option)
Does anyone know a transaction or table (table join) where i can find the needed information?
Thanks in advance for your help
Kind regards,
Peter

Hello Riyaj,
Thank you for the swift reply. It seems like a good solution. When go to the menu option i get the pop-up with the following classes:
AP06
P0103
AP01
P0101
AP05
F0102
F0101
P0106
P0108
P0109
P0112
AP03
P0105
AP04
CE01
G0101
G0102
G0103
Does this mean that of all the equipments in the list, only these classes are applicable to those equipments? I can not imagine, because if i check the class list, 182 equipment classes are supposed to be assigned...

Similar Messages

Need link between Equipment- class- characteristics- values...

Hi Guys,
As per the customers requirement I have to list down all the equipments along with the respective corresponding values. The equipments are linked to the Characteristics by class type and class and then characteristics and then the the values that are assigned.
I am aware that the characteristics and the values are saved in the CABN and CAWN table and the link between them us the internal number.
Can any one please suggest me if there is a way to find a table link for equipment which are assignd to a Class type and hence a class and then these characteristics in CABN and values in CAWN.
Thanks in advance.
Anoop

Plesae post your question in the appropriate forum -- this is for Asset Accounting.

Read Document Class Characteristics Values (Class Type 017)

Hi Gurus,
I want to read values of Document Class Characteristics (Class Type 017).
Is there any Functional Module available for this?
Best regards,
Abir.

Hi ,
Use this BAPI   BAPI_DOCUMENT_GETDETAIL2 to get the details of class and char values for particular documents.
kindly enter the data about the DIR and mark the ent
DOCUMENTTYPE                  DRW
DOCUMENTNUMBER            2000
DOCUMENTPART                 000
DOCUMENTVERSION            00
GETOBJECTLINKS                       X
GETCOMPONENTS
GETSTATUSLOG
GETLONGTEXTS                          X
GETACTIVEFILES
GETDOCDESCRIPTIONS               X
GETDOCFILES                             X
GETCLASSIFICATION                    X
GETSTRUCTURE
GETWHEREUSED
HOSTNAME
INHERITED
Here whatever marked as a 'X' BAPI will return the values for particular DIR.
Use TCODE SE37 for executing this BAPI or get the help of your technical person.
Regards
Abhiji A. Pachgade

Equipment - Class Characteristics restriction

Hello,
I would like to get some insight and the way of proceeding further for the below requirement. We have two characteristics defined in CT04 for Equipment - Manufacturer and Model Number.
Example
Manufacturer can have values like ABC, XYZ, JUO.....
Model Number can have values like 123 Model, 124 Model, 125 Model. 126 Model
My first requirement is - I need to have defined the Manufacturer and Model Number in tables, and refer that custom table in CT04 (I think I can use value check against table) option. Is this is the correct way?
My second req is - For example if I choose ABC from Manufacturer then only 125 Model and 126 Model should show up on Model Number Characteristic - how to achieve this? I have given an example of values here, but in runtime it could be dynamic, so not sure how to write Dependancy here
Any help is much appreciated!
Regards,
Justin.

Hi Justin,
For your first requirement - Yes, you can use the option check against table but only drawback here is that the table you are referring should have one primary key and not more than that(Check this).
Second requirement - If you have two characteristics for manufacturer & model, then this not possible. Instead you can have one characteristic for both and maintain model numbers as sub-characteristic values for each of the manufacturer value.
Regards,
Ravi

Item Class ,Characteristics Value Change.

Hi ,
Is any Std SAP transaction present which will allow me to change the values of Characteristics assigned to Item of Notification ( PM/CS) through classification tab functionality.
Riyaj

Riyaj,
Can you please give more details of your issue
PeteA

From which table characteristics value is been picked in Batch(023 class)

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Regards

Missing characteristics value in table AUSP

Hi all,
In the classification of equipment master, the characteristics value of a new class could be shown but the value cannot be found in the table AUSP.
(it's been ensured that the object no. input is correct)
Where is the value stored? or is there something wrong?
Many Thanks!

hi,
check CABN table.

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Mass Upload of object dependency for characteristics value

Hi ,
I need to upload the object dependency for characteristics values through transaction CT04. My input data consists of characteristcs name , characteristics value and the object dependency (KNNAM) . Need to populate the KNNAM field alone .
Have tried with the FM 'CTMV_CHARACT_CHANGE_KNOWL_VAL' which suits my requirement but teh dependencies are not getting uploaded . Am I missing anything ? Since I do not have class details i.e class num and class type I am not able to use the BAPI like 'BAPI_CLASS_CHARVALUE_LOCAL_DEP ' . Please suggest any othe r suitable method .
Thanks in advance.
Sanjeev

Hi,
Please check the below link..
BAPI for Characteristic Dependency
Thanks.

Assigning of characteristics value for a batch

Hi All,
Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
The function module is CIF_BATCHCHAR_MAP.
For the above function module the inputs which i have given are...
Material number
Batch
Plant
Class type
Class Number
Characteristics name
Characteristics value
Expecting your earliest reply.
Thanks,
G.C.Arravind Kumar Vikram

Try the code below
*.1 create key
it_objects-key_field = 'MATNR'.
it_objects-value_int = matnr.
APPEND it_objects.
it_objects-key_field = 'CHARG'.
it_objects-value_int = charge.
APPEND it_objects.
CLEAR l_objectkey.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      objecttable    = 'MCH1'
    IMPORTING
      objectkey_conc = l_objectkey
    TABLES
      objectkeytable = it_objects
      return         = it_return2.
2 fill it_num it_char it_curr with values
3 change characteristics
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
    EXPORTING
      objectkey          = l_objectkey
      objecttable        = 'MCH1'
      classnum           = it_class-classnum
      classtype          = '023'
    TABLES
      allocvaluesnumnew = it_num
      allocvaluescharnew = it_char
      allocvaluescurrnew = it_curr
      return             = it_return.

Picking or copying Characteristics Value from material master

Dear Experts,
Please i create five Characteristics which i assign to a Class ( of type 022 ). The Class is then assigned to materials in the classification View of the Material Master.
I want one of the five Characteristics to copy its values from specific parameter value maintaned in the Material Master.
Please assist on how to accomplish this?
I did the following but did not get the desired results; While creating this Characteristic, in the Values Tab, I filled ''MARC'' in the Tablename field & in the Fieldname field, i enter the technical fieldname of the particular field from table MARC which i want.
I want this particular value to be automatically copied into the Characteristics Value field in the Foreground for eacb batch anytime Goods Receipt is done.
after doing this, anytime Goods Receipt is done & a batch number generated, it takes me to the Classification screen, but this particular field which i desire to be auto updated remains blank.
Please assist ?

Hi,
1. This will not automatically updated just as we wil fill the addtional date table and field.
2. you need to write the object dependency to get it updated when you call somewhere
3. Generally in the batch level you will be able to do this .( even you can use function / object dependency )
Reg
Dsk

Copying Batch Characteristics Value from Standard SAP Table Field

Dear Experts,
1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04, on the Additional Data tab, I filled the following fields as follows: Table Name = MCHA, Field Name =ERNAM.
'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
TRIMMED was assigned to a batch managed material ADE245DD.
After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019 for the generated batch.
2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
Regards

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Batch Characteristics value in report

I want to develop a custom report where material master batch characteristics value should be displayed.
The report will display based on Process order No. In Process order AFPO table I am bringing MATNR, CHARG, WERKS information.
Now, the MATNR is maintained with a batch classification of class type 001 (material class) one characteristic "Z_NUMERIC" and value is maintained as "22345".
Now, in custom report I have to bring the 22345 no. In which Table I can get the information for material for 001 class type characteristics value?
Please repond.

You can find it in table ausp
Regards,
Dhaval

How to show the Characteristics Values of Batch appear upon Search?

Dear all
We are implementing SAP for Wood Industry.
Facts:
1. There are 3 batches created for the raw material.
2. Each batch has the characteristics of Thickness, Width, Length with characteristics value 24mm, 140mm, 1530mm
3. 1 Production Order has been create to produce raw material (RM) to semifinised goods (SM).
Quetions:
During GI to Produciton Order using MVT 261, when we try to select batches from the Item Detail level, the pop up search windows only show us the existing 3 Batch Numbers available for the RM, it does not show the characteristics value "thickness, Width, length" that describe each batch.
And this has caused serious problem to use during their selection of batch as batch number will only make more sense to them if it is shown together with the characteristics value.
Apart of opening additional screen to show the batch information of each batch, is there any config I need to do to solve this situation?
Mark will be given handsomely.
Thanks.

Hi,
it is possible to use another search help (Tab Strip: Search for batches via classes, when you press F4 in the batch field).
Here you have to enter the class number first.
Then you get a list of all characteristics in this class, and you can narrow your selection, by setting values for specific characteristics.
After that, press F8 (Find in initial class)
You will get a list of batches, assigned to the selected class, and fullfilling your selection criteria.
Now you can display either the characteristics of a single batch, or you can define a layout for the ALV-Table control, with all characteristics, which you want to see in the overview.
Another possibility is, to open up the 'batch information cockpit' (transaction BMBC) in a separate mode. Here you can see the characteristics ( if you define a selection class on tab strip 'Characteristics' ), e.g. in combination with stock information, which might be relevant as well.
Here you can download some screenshots (link wiil be valid for 80 days)
Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z]
Kind Regards
Michael Franz
IBU Mil Products & Mining
SAP AG

Same Batch Number with different characteristics value

Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation      Batch number               batch Class               Length     width     Diameter
1                        1000                              022                              100        50             20
2                        1000                              022                              120        25             10
3                        1000                              022                              150        70             30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
Vimal

Dear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds,

Equipment, classes, characteristics, values

Similar Messages

Maybe you are looking for