Equipment Components Cannibalization

Hi All,
My client is implementing an equipment cannibalization process wherein spare parts of an equipment on stand-by are removed and transferred to a similar component in need of that spare parts. They require a documentation of these movements since at times these equipment (the ones on stand by) are sold and buyers require a list of spare parts removed or defective parts (from the equipment that used the on stand-by equipment's spare parts) installed in these equipment.
For example. Prime Mover A is on standby when Prime Mover B needed a transmission gear. Maintenance orders the removal of tranmission gear from Prime Mover A and the installation of the same to Prime Mover B. My client documents this manually right now and whats to put it in SAP. Showing the Equipment where the parts came from and where it will be installed.
Can anyone help me figure out a standard way by which I can accomplish this requirement in SAP ECC 6 PM? Im planning to make a new notification type but i cannot configure the view screens to contain the information of such movement.
Thanks for the help.
Andrew

hi
iam not sure ,you can use the IE4N T code for this, try to create equipment with BOM of required material with serial numbers ,so that you an trace back
define the separate notification for this and assign in the IMG settings for installation and dismantle,hence when you do the install/dismantle/replace you can get the notification details.
first dismantle the material with serial number
then install to the respective FL or equipment
regards
thyagarajan

Similar Messages

Managing warranties for equipment components

Hi! I have the following issue:
I need to implement a solution where user can manage warranties for equipment's components besides the equipment warranty. User requires that when a new component is assigned to an equipment, like bill of materials or any other way..system advises him when creating a notification or maintenance order over the equipment, if any of its components is under warranty, eventhough equipment warranty period had expired.
Does anyone know any way how to manage it?
Thanks in advance,
Regards,
Eva

Hi,
I beleive it won't possible thru standard..
Please check below exits..Hope it may helps you.Take help from ABAP er to meet your requirement.
BG000001 |User Exit: Warranty Check |
BG000002
User Exit: Warranty Check Dialog Box
| BG000003 |User Exit: Subscreen for Changing Warranty Check Result
Kuber

Job Opening in Denver, CO

Job Posting Title: IRC25919
Job Title: EngineerBrief Description:
DISH Network is an innovative industry leader distinguished by its pioneering spirit. Ever since our establishment in 1980, we’ve been the ideal workplace for people with adventurous spirit and creativity, who are smart risk takers and aggressive winners - all those for whom the status quo just isn’t enough. Our Fortune 250 Company continues to define the curve in television entertainment. We are always improving and extending our products and delivering greater value to people, including our workforce of 25,000 plus. Come explore the big picture with us! Come to DISH Network with your high energy and desire to achieve to our state-of-the-art Inverness Service Center. Here you have the opportunity to become a part of an exciting organization that has the vision to be the leader in changing the way the world communicates by providing innovative technology, quality products and dynamic services. Designs, develops, and tests the manufacture and installation of electrical equipment, components, or systems.
Detailed Description:
This is an entry level software engineer position. Designs electrical equipment, components, systems, instruments, and products. Plans and implements research methodology and procedures related to engineering projects. Prepares and analyzes technical drawings, specifications, and maps to ensure installations and operations conform standards and customer requirements. Performs detailed calculations to compute and establish manufacturing, installation, and maintenance standards and specifications. Coordinates manufacturing, installation, maintenance, and testing activities to ensure compliance with specifications, codes, and customer requirements. Estimates cost of labor, materials, equipment, construction, etc.; prepares reports.
Job Requirements:
Bachelor's degree (B. S.) in Electrical Engineering from four-year college or university; or at least four years related experience and/or training; or equivalent combination of education and experience, with emphasize in software.
Additional Details: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conforms to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Proficient with C/C++, and ability to debug, understand abstract data types and Object-Oriented Programming, Win32 based programming is desirable. Proficient with LabVIEW programming, and debugging. Ability to read schematics and troubleshoot electrical circuits, understanding of microwave systems is desirable as well.
APPLY HERE
Local candidates only. Do not respond to this post. All applicants must use the above link.
Message Edited by Dennis Knutson on 08-04-2009 03:16 PM

I would apply for this job if i didnt live in florida lol, but because i do i am stuck trying to find a job in florida not fun
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome

Annual Maintenance Contract with vendor

Dear Experts,
I am new to AMC cycle.
I have scenario like this ,
Can anyone suggest me how to execute this in sap
u2022     Get AMC Estimation from the party ( supplier/contractor ) and place purchase order.
u2022     Make Payment to the party ( supplier / contractor) and sign the contract .
u2022     Make Preventive maintenance / Brake down maintenance as per the contract
u2022     If required send the Equipment / Components to the party through returnable challan .
u2022     Receive the rectified equipment / components from the party and close the challan .
u2022     Create history for the same .
Your helps will be really appreciated
Thanks and Regards
V.Dhanasekaran

Hi,
Go through this thread.
AMC for a equipment

What is International business Division related bond licences, ARE forms?

What is International business Division related bond licences, ARE forms?

Hi Goutam
In International Business, to encourage the exporters, Government of India have introduced various incentive schemes to bring more revenue to country. Listing a few for your information.
1) Duty Entitlement Pass Book Scheme

Duty Entitlement Pass Book Scheme (DEPB Scheme)- The scheme is easy to administer and more transparent. The scheme is similar to Cenvat credit scheme. The exporter gets credit when he exports the goods. The credit is on basis of rates prescribed. This credit can be utilised for payment of customs duty on imported goods.
The objective of the scheme is to neutralise incidence of customs duty on the import content of export product. The neutralisation shall be provided by way of grant of duty credit against the export product.
Exports under DEPB scheme are allowed only when DEPB rate for the concerned export product is finalised.
Under this scheme, exporters will be granted duty credit on the basis of notified entitlement rates. The entitlement rates will be notified by DGFT. The entitlement rates will be a % of FOB. The entitlement rate will be fixed on basis of SION (Standard Input Output Norms) and deemed import content. Value addition achieved in export product will also be taken into account. Supplies made to unit in SEZ are also entitled to DEPB. DEPB is issued only on post-exportation basis. Excise duty paid in cash on inputs will be eligible for brand rate of duty drawback.
2) Export Promotion Capital Goods (EPCG) scheme

EPCG scheme - Under Export Promotion Capital Goods (EPCG) scheme, a licence holder can import capital goods (i.e. plant, machinery, equipment, components and spare parts of the machinery) at concessional rate of customs duty of 5% and without CVD and special duty. Computer software systems are also eligible. Import of spares of capital goods is permitted, without any limit. Jigs, fixtures, dies, moulds will be allowed to the extent of 100% of CIF value of licence. Spares for existing plant and machinery can also be imported. Second hand capital goods upto 10 year old can also be imported under EPCG scheme.
EPCG authorisation is issued with validity period of 24 months
3) Advance License
An advance licence is granted for the import of inputs without payment of basic customs duty. Such licences shall be issued in accordance with the policy and procedure in force on the date of issue of the licence and shall be subject to the fulfillment of a time-bound export obligation, and value addition as maybe specified. Advance licences maybe either value based or quantity based.
As per the latest amendments to the EXIM Policy, the facility of Back to Back Inland Letter of Credit has been introduced, to enable an Advance Licence holder to source his inputs from domestic suppliers.
Value based advance license
Under a value based advance licence, any of the inputs specified in the licence maybe imported within the total CIF value indicated for those inputs, except inputs specified as sensitive items.
Under a value based advance licence, both the quantity and the FOB value of the exports to be achieved shall be specified. It shall be obligatory on the part of the licence holder to achieve both the quantity and FOB value of the exports specified in the licence.
4) Drawback

Drawback is allowable if any manufacture, process or any operation is carried out in India [section 75(1) of Customs Act]. Thus, drawback is available not only on manufacture, but also on processing and job work, where goods may not change its identity and no manufacture has taken place.
Type of Drawback Rates All Industry Drawback rates are fixed by Directorate of Drawback, Dept. of Revenue, Ministry of Finance, Govt. of India, Jeevan Deep, Parliament Street, New Delhi - 110 001. The rates are periodically revised - normally on 1st June every year. Data from industry is collected for this purpose. The types of rates are as follows :
All Industry Rate - This rate is fixed under rule 3 of Drawback Rules by considering average quantity and value of each class of inputs imported or manufactured in India. Average amount of duties paid is considered. These rates are fixed for broad categories of products. The rates include drawback on packing materials. Normally, the rates are revised every year from 1st June, i.e. after considering the impact of budget, which is presented in February every year. All Industry drawback rate is not fixed if the rate is less than 1% of FOB Value, unless the drawback claim per shipment exceeds Rs 500.
The AIR (All Industry Rate) is usually fixed as % of FOB price of export products. However, in respect of many export products, duty drawback cap (ceiling) has been prescribed, so that even if an exporter gets high price, his duty drawback eligibility does not go above the ceiling prescribed.
Brand Rate - It is possible to fix All Industry Rate only for some standard products. It cannot be fixed for special type of products. In such cases, brand rate is fixed under rule 6. The manufacturer has to submit application with all details to Commissioner, Central Excise. Such application must be made within 60 days of export. This period can be extended by Central Government by further 30 days. Further extension can be granted even upto one year in if delay was due to abnormal situations as explained in MF(DR) circular No. 82/98-Cus dated 29-10-1998.
Special Brand Rate - All Industry rate is fixed on average basis. Thus, a particular manufacturer may find that the actual duty paid on inputs is higher than All Industry Rate fixed for his product. In such case, he can apply under rule 7 of Drawback Rules for fixation of Special Brand Rate, within 30 days from export. The conditions of eligibility are (a) the all Industry rate fixed should be less than 80% of the duties paid by him (b) rate should not be less than 1% of FOB value of product except when amount of drawback per shipment is more than Rs. 500 (c) export value is not less than the value of imported material used in them - i.e. there should not be negative value addition.
5) ARE Forms

Any goods manufactured in India and exported, means the rebate of duty or tax, as the case may be, chargeable on any imported materials or excisable materials used or taxable services used as input services in the manufacture of such goods. To account all these transactions, Central Excise have asked the manufacturers to submit various forms depending upon their business. ARE form is mainly used for exports for claiming excise duty either by Letter of Undertaking, Bond or Rebate.
Last but not least, unfortunately, in SAP, but for excise, none of the issues are addressed.
Hope this information would suffice. Reward if this helps you.
Thanks
G. Lakshmipathi

Stock update of equipment and its individual components when dismantling?

Dear experts,
We are buying an equipment(for ex.Generator) and we would like to dismantle the equipment into individual components(ex..motor,alternator etc) and build the stock of the individual components in stores so that we can use the components for different maintenance acitivities.when we dismantle the components the stock of the actual equipment(generator) should become 0 and stock of the individual components(ex..motor,alternator etc) should get added in the stores.How can we map this scenario?
Regards,
Ashraf

Ashraf
When I read your requirement I forsee you proceed in the following way
Seems you are buying a assembly instead of buying individual spares
You need to convert that as a Equipment by issuing to a Maintenance order only if you feel
It's going to be installed physically in a location & starts operating as a technical object
Other wise if it's going to be dismandled into separate spares please discuss with MM consultants
as it involves stock movements ,they can map into a process
Don't issue it against Maintenance order route in this case
rgds
Satish

Customer service warranty for components in an equipment

Hi Friends
Pl guide me how to configure the warranty for an equipment where only few components only will be replaced free of charge to the customer during warranty few components are charged during warranty, how to bill for the components that will be charged during warranty.
Thanx and regards
syed.

I, too, had to followup via telephone with Tech. support in the Philippines.
They dropped the ball, but quickly regrouped and the process is back on track to attain a fix.
Apparentely, there is a "Service Depot" in San Jose, TX (SAT).
I did not experience "hold times, " so only can advise to telephone back, take names and notes.
Ask to speak with a supervisor, if at all possible, try and remain somewhat calm.

DVI-to-VGA adapter disabled on HDMI-equipped monitors?

Can anyone with an Apple DVI-to-VGA adapter on a Core Duo or Core 2 Duo (both at 10.6.8, currently and probably forever) still connect to a second monitor if the monitor also has an HDMI port? I could until early 2011. From 2008 to 2010 I could connect to every VGA monitor through the DVI adapter.
I thought the DVI-out on my MBP died but got a newer MBP and it, too, doesn't work on any HDMI-equipped screens. Both computers and all my DVI-to-VGA adapters work fine on monitors without HDMI. Yes, I rebooted. No, it's not the cables. Again, all components otherwise work in other arrangements. I am not talking about any other setups. The HDMI-equipped monitors all work fine with miniDisplayPort-to-VGA plugs (today!) from newer Macs.
Any work-arounds? Anyone have a best-recommendation on an adapter that works still?

Thanks, BSteely, I have the latest QT and iTunes already. Closing the lid seems to kick the MacBook external display into some special mode that Front Row can't display videos in. For example, you get the Front Row interface, but as you select movies/TV shows, the preview window on the left side is blank. Open the cover, and have both displays going, and you can see the previews fine (and of course, you can see the movies/TV shows play fine as well when you click on them)
Running Quicktime Player full screen works fine without Front Row in either open or closed lid mode. So it is apparently something wrong with Front Row itself.

Error while creating equipment BOM (IB01)

hi guys,
while creating equipment BOM (IB01) i am getting this error, while adding components.
'Material type NLAG cannot be used with item category (plant 1000)'.
regards
chinta

HI Chinta,
I understood ur problem IB01-give the equipment number which is generated by the system and give plant name in which you have created the equipment and bom usage as 4 (plant maintenance) and press enter.
Then you will get the components list give the description,quantity and item category as:
as you gave it as L it is throwing an error give it as N(Non stock item), then you wont get the error.while selecting the item cat. you will get differnet components and you select the appropriate one based on you equipment.Hope you issue is resolved.
Regards,
Bharat

MSI's Latest Dragoon Equipment Z77A-GD65 Gaming!!!

As PC Gaming is becoming more and more popular, MSI formed a gaming community named “Dragoon Army”. This division is composed of international gaming teams sponsored by MSI and is equipped with G-Series notebooks and as well as Gaming desktop hardware.
The latest gaming equipment that MSI has to offer is the “Z77A-GD65 Gaming “motherboard. Now in black and red color theme and with the new MSI Dragon look, it is a new masterpiece tailored for gaming perfection.
Below are the highlights of the board:
• Killer E2200 Game Network – Is built for maximum networking performance for online games and high-quality streaming media. Featuring Advanced Stream Detect, Killer E2200 automatically detects and accelerates game traffic ahead of other network traffic for smoother, stutter-free in-game performance and the competitive edge. With this exclusive, automatic traffic prioritization, games and real-time chat get priority over low-level system chatter, giving you the lowest latency for game data on the most controllable network hardware available.
•Gaming Device Port – Optimized for high polling rate (500 to 1000 Hz) which lower’s your mouse’s response time from 8 milliseconds to 1 millisecond. Additional gold plating on the ports enhances the durability drastically and ensures your PS/2 and USB ports are always working when you ship out to a LAN party.
•Sound Blaster Cinema – Get amazing surround sound with just stereo headphones. The most important gaming sound effects are reproduced crystal clear allowing to focus on your game even during extremely long gaming sessions.
•Military Class III Components – High quality components ensuring your PC’s stability and efficiency under extreme gaming conditions.
•Optimized for Multi-Graphic Cards – Provides enough space for optimal airflow when using multi-graphic configuration (SLI, Tri-SLI & Crossfire). No worries about PC overheating.
•OC Genie II – Automatically overclocks your CPU and Memory for a faster and smoother gaming experience.
•Supports DDR3 3000 Memory for faster response
Let’s open up the package
Black interior and the bundles are all placed underneath the motherboard.
Specifically there are new bundles for this gaming kit. First one is the Door Label with the message “I’m Sorry Busy Gaming / I’m Not Here” and the Dragoon Army badge which I think is cool hehehe.
• User’s Guide
•Quick Installation Guide
•Reviewer’s Guide - Gives a good understanding how you can fully maximize the Killer E2200 Game Network and the Sound Blaster Cinema Audio Features.
• DVD Software Utility Disc
• 2x SATA 6GB/s Cables
• M-Connectors
• V-Check Points
• I/O Back plate
Here is the board. New heatsink design for the VRM and the most noticeable of all is the Southbridge heatsink with the Dragon design ~~ Wicked!! .
12 CPU Power Phase design. Super Ferrite Choke and Hi-C Caps of Military Class III components around the CPU socket providing the best electric current capacity and at the same time power efficiency. Heatpipe design in VRM heatsinks for faster heat dissipation.
At the upper right area of the board are the Easy buttons which consists of OC Genie, Power and Reset. Then just below it is the V-Check points which provides exact and actual voltage readings of your Processor, Memory and Chipset and usually being use during overclocking.
8-Pin processor power connector which helps to gain higher overclocks instead of the usual 4pin. 4x DIMM slots with a max of 32GB and when paired up with a 22nm CPU it can handle speeds up to 3000MHz.
Clean layout for the bottom part of the board. 3x Gen3 PCIE VC Slots capable of running video cards at bandwidth speed of 16x/8x/4x.
Carved Dragon!!! Such masterpiece  . Below is the Debug LED indicator which helps isolating problems during system boot up and also serves as temperature indicator of the processor during system operation.
Left to Right: 2x SATA 6GB/s Asmedia Controller, 4x SATA 3GB/s Intel, 2x SATA 6GB/s Intel and Intel USB 3.0 header.
Just want to take photo of the labels hehehe 
Well I hope MSI included a Bluetooth and Wifi Connectivity for the board like what they did with the MSI Z77 MPower.
• 1 x PS/2 keyboard/mouse port
• 1 x Clear CMOS button
• 1 x Coaxial S/PDIF-out port
• x Optical S/PDIF-out port
• 4 x USB 2.0 ports
• 2 x USB 3.0 ports
• 1 x RJ45 LAN jack
• 1 x 6 in 1 audio jack
• 1 x HDMI®
• 1 x DVI-D
• 1 x VGA
Moving on, I will be showing you screenshots of Click Bios II, Control Center in Windows, Sound Blaster Cinema, Killer E2200 and the UEFI Bios.
These are the two windows you will be using to configure your Killer Network. You can assign network priorities with certain softwares. So if you are an online gamer. Ofcourse you will prioritize your games to lower the latency and smoothen out your gameplay.
Now we look into the control panel of the Sound Blaster Cinema. This is an improved version of the previous THX Audio software. You can adjust the bass from here, make audio surround, crystallize the audio to make the sound more clearer and many more…
Control Center configurations and tabs are all the same but the color is changed to black and red and ofcourse the addition of the Dragon logo. Same goes for the Click Bios II Gaming version.
The response of the BIOS is much faster. Tabs are all the same though.
Another set of UEFI screenshots.
That’s it for now and will be updating this with benchmarks stay tuned….

Now available in the U.S.A. market;
>> Z77A-GD65 Gaming <<

Updating Equipment from SAP R/3 to CRM

Hi ,
In my Current Scenario, Equipments Created in the SAP R/3 will replicated to SAP CRM system as a Objective for I Base . at the same it will create IBASE Hierarchy . an installed base component is created for the individual object. Both objects are linked to one another so that the installed base components point to the individual object .
Both Component Description & Objective Description Should be same.
Now Issue was, we have changed Equipment Description in R/3 System and it will replicated in to SAP CRM system perfectly . But component Description still showing old one even Objective shows updated Description
1) Is this SAP stranded functionality defined like this ? if not could please some one suggest solution for this ...
Regards
Ravipati

Check the links
Integration between mySAP and CRM using XI
How to make integration with CRM system with XI
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
CRM XI Integration
Regards.

Tables or Logical database to create standard report for Equipment BOM?

Dear All
My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock quantity,storage location of stock,description of component,price of component,Pending PR of component(if any),Pending PO of component(if any) etc
I want to develop the report with standard infoset query instead of going for abap development.is there any logical database to map the report or what tables can i use for table joins??
Required sample report with fields as below
BOM Component
Stock available/Not available indicator
Description of Components
BOMQty/ UOM
Price
Part Number
Plnt
Sloc
Stock Qty
Bin
Pending PR
Pending PO
1000001121
YES
BEARING
NO
2000
ERS22
1000
MECH
4
A1
300012431
Regards
M.Manojkumar

Manoj,
The following is the tested solution.
Table join
Output
This figure shows the case of a Equipment BOM where 3 components are there. Installed Quantity are 4, 1, 1 respectively. Last two columns are showing the Storage Locations and the Stocks available.
Fields taken to output are
From STPO : IDNRK MENGE MEINS
From MARD LGORT LABST
As said before, more than this you can not do in SQVI. With this basic join in SQ02, using codes in Extras you can do much more.
Jogeswara Rao K

Item category in equipment BOM ?

hi all,
how could i chose the item category of a component while creating equipment BOM.
how do i know weather it is of 'L' of 'N' or any thing else.
regards,
chandra

Hi
Item category L- stands for stock items i.e. for these items you normally maintains stocks.
N- is Non stock item i.e. when you use it in BOM its for idication only. However when one creates order & assigns components of item category N, it trigers a PR for immediate procurement. So check with your business requirement.
Regards
Shakti

Getting the below Exception after starting the components in JavaES5

Hi All,
I have Installed the JES5 "java_es-5_appsuite-windows-x86" on windows and after successfull intsallation and checking the option to start all the components getting the below error in the appserver-->domains-->domain1-->logs-->server.log file
===============================
[#|2008-05-19T22:20:34.562+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|launcher.jvmoptions_exception
com.sun.enterprise.admin.util.InvalidJvmOptionException: Invalid Jvm Option Files/Sun/JavaES5/appserver/domains/domain1/config/server.policy. Option must start with -.
 at com.sun.enterprise.admin.util.JvmOptionsElement.checkValidOption(JvmOptionsHelper.java:393)
 at com.sun.enterprise.admin.util.JvmOptionsElement.<init>(JvmOptionsHelper.java:280)
 at com.sun.enterprise.admin.util.JvmOptionsHelper.<init>(JvmOptionsHelper.java:69)
 at com.sun.enterprise.tools.launcher.ProcessLauncher.buildInternalCommand(ProcessLauncher.java:545)
 at com.sun.enterprise.tools.launcher.ProcessLauncher.buildCommand(ProcessLauncher.java:414)
 at com.sun.enterprise.tools.launcher.ProcessLauncher.process(ProcessLauncher.java:204)
 at com.sun.enterprise.tools.launcher.ProcessLauncher.main(ProcessLauncher.java:128)
[#|2008-05-19T22:03:56.125+0530|WARNING|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=16;|ADM1082:Creating the application reference failed - Detailed Message:
com.sun.enterprise.deployment.backend.IASDeploymentException: Component not registered
 at com.sun.enterprise.deployment.phasing.DeploymentServiceUtils.getRegisteredType(DeploymentServiceUtils.java:973)
 at com.sun.enterprise.deployment.phasing.PEDeploymentService.associate(PEDeploymentService.java:232)
 at com.sun.enterprise.deployment.phasing.PEDeploymentService.associate(PEDeploymentService.java:276)
 at com.sun.enterprise.admin.mbeans.ApplicationsConfigMBean.createApplicationReference(ApplicationsConfigMBean.java:652)
 at sun.reflect.GeneratedMethodAccessor218.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:305)
 at com.sun.enterprise.admin.config.BaseConfigMBean.invoke(BaseConfigMBean.java:360)
 at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
 at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
 at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
 at sun.reflect.GeneratedMethodAccessor22.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sun.enterprise.admin.util.proxy.ProxyClass.invoke(ProxyClass.java:54)
 at $Proxy1.invoke(Unknown Source)
 at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:272)
 at com.sun.enterprise.admin.jmx.remote.server.callers.InvokeCaller.call(InvokeCaller.java:38)
 at com.sun.enterprise.admin.jmx.remote.server.MBeanServerRequestHandler.handle(MBeanServerRequestHandler.java:92)
 at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.processRequest(RemoteJmxConnectorServlet.java:69)
 at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.doPost(RemoteJmxConnectorServlet.java:94)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
 at sun.reflect.GeneratedMethodAccessor141.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
 at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
 at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
 at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
 at java.security.AccessController.doPrivileged(Native Method)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
 at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
 at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
|#]
[#|2008-05-19T22:04:03.718+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.deployment|_ThreadID=26;|DPL5109: EJBC - START of EJBC for [guessnumber]|#]
[#|2008-05-19T22:04:03.718+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.deployment|_ThreadID=26;|Processing beans ...|#]
[#|2008-05-19T22:04:03.781+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.deployment|_ThreadID=26;|DPL5110: EJBC - END of EJBC for [guessnumber]|#]
[#|2008-05-19T22:04:03.937+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.deployment|_ThreadID=26;|Total Deployment Time: 4875 msec, Total EJB Compiler Module Time: 63 msec, Portion spent EJB Compiling: 1%
Breakdown of EJBC Module Time: Total Time for EJBC: 63 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 63 msec (100%),
|#]
[#|2008-05-19T22:04:11.437+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.deployment|_ThreadID=26;|deployed with moduleid = guessnumber|#]
[#|2008-05-19T22:04:11.718+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=14;|ADM1041:Sent the event to instance:[ApplicationDeployEvent -- reference-added guessnumber]|#]
[#|2008-05-19T22:04:12.000+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=14;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-05-19T22:04:12.031+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=16;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- deploy web/guessnumber]|#]
[#|2008-05-19T22:04:12.046+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.container.web|_ThreadID=16;|WEB0100: Loading web module [guessnumber] in virtual server [server] at [guessnumber]|#]
[#|2008-05-19T22:04:15.734+0530|INFO|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=16;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-05-19T22:04:23.593+0530|WARNING|sun-appserver-ee8.2|javax.enterprise.system.tools.admin|_ThreadID=14;|ADM1082:Creating the application reference failed - Detailed Message:
com.sun.enterprise.deployment.backend.IASDeploymentException: Component not registered
 at com.sun.enterprise.deployment.phasing.DeploymentServiceUtils.getRegisteredType(DeploymentServiceUtils.java:973)
 at com.sun.enterprise.deployment.phasing.PEDeploymentService.associate(PEDeploymentService.java:232)
 at com.sun.enterprise.deployment.phasing.PEDeploymentService.associate(PEDeploymentService.java:276)
 at com.sun.enterprise.admin.mbeans.ApplicationsConfigMBean.createApplicationReference(ApplicationsConfigMBean.java:652)
 at sun.reflect.GeneratedMethodAccessor218.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:305)
 at com.sun.enterprise.admin.config.BaseConfigMBean.invoke(BaseConfigMBean.java:360)
 at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
 at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
 at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
 at sun.reflect.GeneratedMethodAccessor22.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sun.enterprise.admin.util.proxy.ProxyClass.invoke(ProxyClass.java:54)
 at $Proxy1.invoke(Unknown Source)
 at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:272)
 at com.sun.enterprise.admin.jmx.remote.server.callers.InvokeCaller.call(InvokeCaller.java:38)
 at com.sun.enterprise.admin.jmx.remote.server.MBeanServerRequestHandler.handle(MBeanServerRequestHandler.java:92)
 at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.processRequest(RemoteJmxConnectorServlet.java:69)
 at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.doPost(RemoteJmxConnectorServlet.java:94)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
 at sun.reflect.GeneratedMethodAccessor141.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
 at java.security.AccessController.doPrivileged(Native Method)
 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
 at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
 at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
 at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
 at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
 at java.security.AccessController.doPrivileged(Native Method)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
 at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
 at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
 at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
|#]
=========================================================
Any suggestions would be greatly appreciated.
Thanks & regards
Srikanth

Solution
Hi,
It is what I guessed as the web page explains. The domain.xml file does not recognize any equipment name that has an acute in it. That was my case. So I have changed the name of my equipment and the problem was resolved when I installed the GlassFish again.
Thanks for all of you about to visit my posts
See you around,
Oggie
PS:
Here I leave you the tag in the domain.xml that causes the problem,
<jms-service addresslist-behavior="random" addresslist-iterations="3" default-jms-host="default_JMS_host" init-timeout-in-seconds="60" reconnect-attempts="3" reconnect-enabled="true" reconnect-interval-in-seconds="5" type="EMBEDDED">
 <jms-host admin-password="admin" admin-user-name="admin" host="Jose" name="default_JMS_host" port="7676"/>
 </jms-service>I hope this time you get it like me

Equipment hierarchy with Non serialized products to Installed base in CRM

Hi,
I have just performed an equipment download from R/3 to CRM. I now have these records created as individual objects assigned to an installed base.
However my equipment record in R/3 has Serialized Products as well as non serialized products in form of BOM (bill of material).
Example: Equipment Hierarchy (In R/3 )
    10123428 Main Equipment have 2 non serialized product
199-012100         (Non serialized product under this equipment)
                270-012200         (Non serialized product under this equipment)
       10123429         Subordinate equipment to main equipment
                              (Serialized product )
340-070800 (Non serialized product under this 2nd equipment)
              270-562700 (Non serialized product under this 2 nd equipment)
The Main equipment(10123428) is created as installed base in CRM successfully.
     The Subordinate Serialized product (10123429) to main equipment is created as individual object under this Installed base of the Main equipment properly.
     But the non serialized products (199-012100,270-012200 ) for main equipment and non serialized products (340-070800 ,270-562700)for the subordinate serialized product are not coming in CRM .
Because When I go to IB53 transaction there is no entry in the components in the product Tab under product id column.
Has anyone replicated R/3 equipment records with BOM structure into CRM and got their Non serialized products visible in the components of the Individual objects.
Any help would be most appreciated.
Regards,
Rahul

Hi Prabhakaran,
You can filter the data downloaded from R/3 to CRM based on the filter criteria assigned to adapter objects. You can do this via transaction R3AC1 wherein you specify the table and fields based on which you want to filter out the data.
For Serial Numbers and Equipments the business objects are SERIAL and EQUIPMENT respectively.
Reward with points if this helps.
Regards,
Gaurav Gera

Equipment Components Cannibalization

Similar Messages

Maybe you are looking for