Equipment download from ECC 6.0 to CRM 7.0

Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.

Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred

Similar Messages

  • Equipment Download from ECC 6.0 to CRM 5.0

    Hi,
    I have made equipment in ECC 6.0 using the Transaction code IE01.
    While trying to download it into CRM, the BDoc shows a validation error
    I have activated the adapter objects EQUI_CONFIG and EQUIPMENT.
    I will be obliged If somebody can give me the step by step process to download the equipment from ECC to CRM and the customizations to be done as a prerequisite.
    Thank You
    Rekha

    Hello Everyone,
    Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
    Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
    The Error Message is <b>Assign a Base Category to the Product.</b>
    I have the Base Hierarchy R3PRODSTYP Assigned to the Application
    Product.
    And i cannot edit the Hierarchy or Categories since they are Downloaded
    from ECC.
    Please let me know how to Specify a Base Hierarchy/Category for the
    Equipments to get Downloaded as Individual Objects.
    Thanks & Regards
    Kumar

  • Issue with customer download from ECC 5.0 to CRM 5.0

    Dear CRM gurus,
    We are facing very strange problem regarding sales area and sales office in CRM 5.0 test system
    During the download of an ECC 5.0 customer into CRM the BDOC is giving the following error - 'Sales office O 50000617 is not available' and 'Sales office O 50000617 sales group not maintained for sales area O 50000608     10 10'and Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    I just select the BDOC and reprocess it immediately. Now the customer is downloaded into CRM and BDOC turns into green. I am also able to see the sales office and sales area in the downloaded CRM BP.
    The sales office 50000617 is very much there in CRM and is properly assigned to sales area 50000608     10 10. That's why, I should be able to reprocess the struct BDOC successfully.
    But for some reason the sales office is not getting determined first time during the download. This issue is driving me crazy. This only happens with the customers with sales office. If there is no sales office in ECC customer (i.e. the field is empty) then there is no issue. This customer will get downloaded without any error.
    Also the downloaded material doesn't have the sales area data. 
    This issue doesn't happen in our development system. The only difference is, sales org structure in development system is manually created and it is downloaded from ECC in test system.
    Can you please advice me on how to solve this issue?. It is a bit urgent.
    All valuable inputs must be rewarded,
    Regards,
    Raj

    Hi Gun,
    You are the only one responded to my issue. I have allocated some points.
    Yes. I have checked the assignment in CRM organizational model.
    I did download the org. structure from ECC 5.0
    All objects including sales offices are activated for determination and I have verified with green light
    As per your suggestion if the sales area data is not matched between the two systems, then how come the error will not reappear during the bdoc reprocess?
    What is missing during the first time bdoc process? Looks something is missing for validation module?
    Any inputs?
    Thanks,
    Raj

  • Customer Master download from ECC 6.0 to CRM 7.0

    Hello Experts,
    We have an issue where the DELTA DOWNLOAD of a customer master is not working. Also, no BDoC is getting generated when the new customer is created in ECC.
    This happens sometimes and not always. Any specific settings or any SAP NOTE on this?
    Kindly help.
    Regards

    Hello,
    Since you've mentioned that this issue takes place only sometimes, I guess the TBE31 events are fine then. Probably have a look at SMQ1 of the ECC and check if the queue pertaining to CUSTOMER_MAIN is stuck somewhere.
    Just cross check if settings in tables CRMCONSUM and CRMRFCPAR are proper.
    Regards,
    Rohit

  • Payment methods download from ECC to CRM

    Hi Masters,
    Due to some requirement, new Payment methods customised in ECC so have to download from ECC to CRM. How it download through delta download. Existing payment methods data updated with adapter object name # CUST_TSP_WRITE and table name # CRMC_BUAG_PAYM in crm. iam new to crm plz Could anyone tell me step by steps.
    its urgent.......... plz........
    thanks in advance.
    Regards
    Sri

    Hi Sri,
    Payment methods maintained in ECC can be replicated to CRM via CRM download object DNL_CUST_PAYM in transaction R3AS in CRM. This updates the associated CRM table CRMC_BUAG_PAYM and CRMC_BUAG_PAYM_T.
    If you wish to create payment methods directly in CRM, then you can do so via customizing in CRM through transaction SPRO >
    Customer Relationship Management   > Master Data   > Business Partner > Business Agreement   >Define parameters for Business Agreement > Define Payment Methods.
    I hope this helps.
    Best Regards
    Gavin

  • Errors while transaction download from ECC- CRM

    we are trying to download transactions from ECC 5.0 to CRM 5.0.
    the initial download has stopped in between and we get an error "SysFail" in the Inbound queue (SMQ2). Information on this error is "The current application triggered a termination with a short dump"
    when we try to analyze the short dump, it says the termination occured in the ABAP program :SAPLCRM_DOWNLOAD_MAP - in "FILL_BTM_PARTNER". In the source code you have the termination point in line 254  of the include program "LCRM_DOWNLOAD_MAPF37".
    please provide pointers to resolve this issue .
    thanks
    RH

    following is the place where the error is being triggered in the program, any suggestions?
    Information on where terminated                                                                   |
    Termination occurred in the ABAP program "SAPLCRM_DOWNLOAD_MAP" - in                         
    "FILL_BTM_PARTNER".                                                                          |
    The main program was "SAPMSSY1 ".                                                             |
    In the source code you have the termination point in line 254  of the (Include) program "LCRM_DOWNLOAD_MAPF37
    Source Code Extract                                                                               
    Line
    SourceCde
    number_int = <ls_bapisdpart>-itm_number.                                |
      if sy-subrc eq 0.                                                                     |
    ls_btm_partner-ref_guid = ls_item_keys-guid.                                        |
    ls_btm_partner-ref_kind = gc_object_ref_kind-orderadm_i.                            |
    endif.                                                                                |
    endif.                                                                                |
    *orderadm_h_guid
    ls_btm_partner-orderadm_h_guid = ls_orderadm_h-orderadm_h_guid.                         |
    *bp_partner_guid                                                                          |
    if lv_nrart = gc_partner_r3_types-customer.                                             |
    *-----AG, WE, RE, RG, etc.                                                                  |
      call function 'CRM_BUPA_MAP_CUSTOMER_TO_BP'                                           |
    exporting                                                                           |
    iv_customer       = <ls_bapisdpart>-customer                                      |
          importing                                                                           |
    ev_partner        = ls_btm_partner-bp_partner_guid                                |
    exceptions                                                                          |
    partner_not_found = 1                                                             |
    others            = 2.                                                            |
    if sy-subrc eq 0.                                                                     |
    display_type                                                                             |
    s_btm_partner-display_type =                                                       |
                           gc_partner_no_type-business_partner_no.                             |
    no_type                                                                                |
    ls_btm_partner-no_type =                                                            |
    gc_partner_no_type-business_partner_no.                              |
         else.                                                                                |
    if ls_btm_partner-partner_fct = '00000001'.                                         |
    >>>>>
    message x020(crm_order_misc) with gv_logsys_r3.
    endif.                                                                              |
       endif.                                                                                |
      if ls_btm_partner-task     eq gc_bdoc_task-delete and                                 |
      ls_btm_partner-ref_kind eq gc_object_ref_kind-orderadm_i.                          |
    special handling for deleting item partner. In this case the item                         |
    partner must not be deleted but updated with the header partner                           |
      insert ls_orderadm_h-orderadm_h_guid into table lt_header_guid.                     |
    insert gc_object_name-partner into table lt_requested_objects.                      |
    call function 'CRM_ORDER_READ'                                                      |
    exporting                                                                         |
      it_header_guid       = lt_header_guid                                           |
    iv_only_spec_items   = true                                                     |
    it_requested_objects = lt_requested_objects                                     |
    importing                                                                         |
    et_partner           = lt_partner_header                                        |
    exceptions                                                                        |
    others               = 1.                                                       |

  • Data in Equipment Download from R/3 to CRM

    Hi,
    I have just performed an equipment download from R/3 to CRM.  I now have these records created as individual objects assigned to an installed base.  However my equipment record in R/3 has some partners related to it (sold to party), I have checked the partner determination in R/3 and created one in CRM with the same partner functions and assigned it to the product category used for the Equipment download.  However even though I the equipment records are downloaded into CRM as individual objects successfully I do not have any related partners for the installed base or individual object.
    Has anyone replicated R/3 equipment records into and got their partners relationships replicated too successfully.
    I have the post Creation of individual object in crm but there is no mention of partner determination in there.
    Any help would be most appreciated.
    Regards

    For the warranty replication, you'll have to do some programming in CRM using BADI CRM_EQUI_LOAD.
    Use method ENLARGE_COMPONENT_DATA.
    Create warranty link
      DATA: it_interlinkage_to_create TYPE crmt_il_ibcwty_maint_ext_tab,
            is_interlinkage_to_create TYPE crmt_il_ibcwty_maint_ext,
            lv_object_guid            TYPE comt_product_guid,
            lv_object_reference       TYPE crmt_il_wty_reference,
            ls_prwty                  TYPE crmm_prwty,
            ls_product_id             TYPE comt_product_id,
            ls_warranty_guid          TYPE comt_product_guid.
        ls_product_id = 'STD_WAR_1Y'.  "Default warranty product
      SELECT SINGLE product_guid FROM comm_product INTO ls_warranty_guid
             WHERE  product_id = ls_product_id.
      is_interlinkage_to_create-warranty_guid =  ls_warranty_guid.
      is_interlinkage_to_create-start_date    =  ls_comp_det3-valfr.
      is_interlinkage_to_create-end_date      =  ls_comp_det3-valto .
    is_interlinkage_to_create-determine_dates = 'X'.
      INSERT   is_interlinkage_to_create INTO TABLE it_interlinkage_to_create.
      lv_object_reference = '02'.
      LOOP AT it_ibap_struc1_tab INTO is_ibap_struc1_tab.
        lv_object_guid = is_ibap_struc1_tab-guid_compc.
      ENDLOOP.
      DATA: it_messages     TYPE  comt_il_error_tab,
            it_interlinkage TYPE  crmt_il_data_ibcwty_tab.
      CALL FUNCTION 'CRM_IBCWTY_IL_API_CREATE'
        EXPORTING
          iv_object_guid            = lv_object_guid
          iv_object_reference       = lv_object_reference
         iv_timestamp              = l_timestamp
          iv_enqmode                = 'E'
        iv_raise_exception        = 'X'
          iv_save                   = 'X'
          it_interlinkage_to_create = it_interlinkage_to_create
        IMPORTING
          et_messages               = it_messages
          et_interlinkage           = it_interlinkage
        EXCEPTIONS
          error_occurred            = 1
          OTHERS                    = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    The reason for this is that warranty is a relationship in CRM and part of your equipment in R/3.
    I'm still looking for the documentation on the partner replication can anybody help me on this?
    Regards,
    Jacques Dokter

  • Equipment changes in ECC not affecting in CRM

    Hi,
    Equipments from ECC are loaded in CRM. Then any changes done for equipment in ECC, not affected those changes in CRM. What needs to check for this to happen.
    rgds,
    balu

    Hi,
    Thanks for the quick reply...
    1. In CRM,
    SPRO->CRM->Master Data->Installed Base->Replication of Technical Objects from SAP ERP->Define Default Settings for Replication of Equipment
    i hv activated Delta Load check box.
    2. No changes are affecting for all equipments.
    3. In table TBE31, following data is maintained:
    EVENT : 00001270
    APPLK : BC_MID
    FUNCT: CRS_MATERIALRT_COLLECT_DATA
    EVENT PM000020
    APPLK BC-MID
    FUNCT EQUIPMENT_COLLECT_DATA
    In table CRMRFCPAR, field DISCARDDAT has not checked.
    rgds,
    balu

  • Replicating Service contracts and Service orders from ECC 6.0 to CRM 2007

    Hi CRM Gurus,
        How can we replicate Service contracts and Service orders from ECC 6.0 and CRM 2007. Any pointers to do this?
    Please let me know.
    Best regards,
    Vinay

    Vinay,
    I dont think you need any Middleware adaptor objects for CRM Request download .
    You need to create a request in CRM using R3AR2 . Here you need to provide the R/3 table name and field name to download the service document along with Document ID
    You can monitor your request download in txn R3AR4.
    But as MCG rightly told , you should have done all requried customized settigns before downloading service documents .
    Regards
    Dinesh

  • Modifying Hierarchy Node name in Query or during download from ECC

    We have some hierarchies that we download from ECC into BI and use them in query to display as report for Income statement or Balance Sheet statements. The issue we want to resolve is when we download the hierarchy from ECC into the intermediate download process tags hierarchy name as prefix for the node name. So for example if the hierarchy in ECC is as below
    ABC (name)
      1000 (node name)
      2000 (node name)
    When its downloaded in BW it looks as below
    ABC
      ABC1000
      ABC2000
    We want to see hierarchy in BW same as ECC. I tried removing the prefix in the query with no success.
    Since the table RSTHIERNODE has the prefixed also as node name so that's how it will be displayed.
    I thought I will modify the download process (datasource) to remove the prefix but the delivered user exit EXIT_SAPLRSAP_004 get executed prior to select of the data.
    Has anyone got any other suggestions?
    Thanks for your time.
    Edited by: SK on Oct 28, 2008 2:19 PM

    Ravi,
    Just checking. Did you create a authorization variable and added it in the query for that characteristic?
    Gova

  • Equipment Replication from ECC to CRM 6.0

    Hi Gurus,
    I am trying to Replicate equipments from ECC to CRM 6.0
    I did all the activities as specified still encountering issue while replicating.
    I did following activities
    1) Default settings
    OLTP-EQ-0401-0401-X(Delta)
    2) BADI - CRM_EQUI_LOAD_STDIMP    (Activated)
    3) Specify adapter object for uploading objects
    0401 - DNL_EQUIPMENT
    I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
    A) I checked SMQ1, SMQ2 - No Queues are blocked.
    B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
    C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
    I checked the BDOC Message for the passed lines in SMW01 it says
    1) Start of Initial load.
    2) No Objects were selected.
    In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
    Please correct me if I am following a wrong process or forward me the check list for Equipment load.
    I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
    Please advice.
    Thanks,
    Sharath.

    Hi Sharath,
    I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
    I have done the following steps:
    1. Created a category for the object family 0401 and assigned the relevant set types to it.
    2 Maintained the settings for downloading equipments into CRM at:
    SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
    3. Activated BADI CRM_EQUI_LOAD
    On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it.  When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
    Would appreciate if you could share how did you solve your problem.
    Thanks in advance for the help!

  • Custom data for equipment load from ECC to CRM 7.0

    Dear All,
    Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
    Thanks & Regards
    DB

    Hi,
    You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from  ECC to  CRM are downloaded.
    For more details jut go through
    http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
    Best Regards,
    Rajendra

  • Price download from ECC goes to which condition maintenance group in CRM?

    Hi all,
    I have a question related to pricing download. If I am downloading conditions from ECC to CRM, how does the system determine that the condition type needs to go to which Application & Condition Maintenance Group in CRM?
    Thanks in advance.

    Hi,
    When u download pricing conditions from ECC to CRM the Application is always CRM and u need to create Condition Maintenance Group in CRM in SPRO path:
    Customer Relationship Management>Master Data>Conditions and Condition Technique>Condition Technique: Basics>Create Maintenance Group
    here u can create and add the conditions and Condition table as required.
    Hope it helps,
    Regards,
    PePe

  • CRM exchange rate delta download from ECC

    Hi experts,
    We are trying to download the exchange rate from ECC for the delta scenario. I've tried to schedule a job to run the program SMOF_DOWNLOAD with Object DNL_CUST_BASIS3, but it comes up with an err, which says "Error     004     DNL_CUST_BASIS3: No Initial Load if data distribution is active. Use Synchron. Load". Will anyone advice how to achieve the delta download for exch rate from ECC to CRM or what i did wrong in the program execution?
    Rgs, Michelle

    Hi,
    you can check the object DNL_CUST_BASIS3 by t-code:R3AC3,
    Delete Function COMPARE, Then can load again and check
    Regards...
    Arup

  • Listing/Exclusion Conditions are not getting downloaded from ECC to CRM

    hi,
    I have created the customized table for listing/exclusion purpose as per the requirement.
    I have created the middleware adapter for that object.(DNL_CUST_G804)
    I have down the initial download and when I check the status it is green color when I check the records in CRM Table I did not find it.
    When I check in the SLG1 the following error has been occurred
    "No Entries Determined for the A Tables (Block 1)"
    Message no. CND_MAP312
    Diagnosis
    No entries have been transferred from R/3 to CRM for one of the following reasons:
    1. The R/3 condition table does not contain any entries.
    2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
    System Response
    Error message CND_MAP 312
    Procedure
    If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
    Condition records have been maintained in ECC server.

    Hi
    i have the same problem , how did you solve it ?
    regards
    Jacopo

Maybe you are looking for