Equipment Download to CRM from ECC
Hi All,
We are trying to download the equipments from ECC to CRM, they are downloading to CRM individually.We want to get them in the hierarchy structure as they are in ECC. Like relevant IObjects grouped to-gether.
Whats the solution for this, please help out on this.
Thanks,
Praveen
Hi,
Below link you can find the details for replicating the Equipment from ECC to CRM.
SPRO> CRM>Master Data--> Installed base --> Replication of equipment from ECC --> Prerequisites and General Information for Equipment Replication
For equipment config download below are the activities.
Initial Download Procedure
1. Activate the adapter object EQUI_CONFIG in mySAP CRM.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Object Management > Business Objects and select the active/inactive box for EQUI_CONFIG.
Examine the filter settings for EQUI_CONFIG. For a each source site, set the filters to the same settings as for the object EQUIPMENT.
Don't forget to regenerate the filters!
2. Start the initial download process for EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Initial Load > Start.
Delta Download Procedure
1. Activate the object class EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Delta Load from R/3 Back-End.
You may wish to activate the EQUI_CONFIG delta download if you are downloading changes for EQUIPMENT.
If you want R/3 to apply filters during the delta download, use transaction SM30 and maintain view CRMPAROLTP as below:
Parameter name = CRM_FILTERING_ACTIVE
Parameter Name 2 = EQUI_CONFIG.
Parameter Name 3 = EQUI_CONFIG
User = CRM
Parameter Value = X
Hope this helps.
Regards,
Chandrakant
Similar Messages
-
EQUIPMENT replication to CRM from ECC
Hi,
Appreciate, if some one can help me in solving my issue with EQUIPMENT Master.
Below is the procedure I followed to replicate EQUIPMENT Master
Through R3AC1 transaction EQUIPMENT object is filtered for one equipment number.
Adapter object EQUIPMENT is used to do the initial load.
Here Validation BDOC is genearted, with the filtered value.But no notification BDOC is generated.
No Equipment or IBase is created in CRM.
Can some one tell me, what are the settings I need to do before replication of EQUIPMENT?
Regards,
PBP
Message was edited by:
SAP CRMSAP Implementation Guide 
Cross-Application Components 
SAP Product 
Basic Settings 
Allow Product References for Individual Objects
Created New Entry, with check box selected for Reference Active
Created New Entries
Customer Relationship Management
Master Data
Installed Base
Replication of Equipment from SAP ECC Customer Service (CS)
Define Default Settings for Equipment Replication
Maintained Below entries:
Site Name: EAS
IBase Category: 01
Product Type: 01
Object Family: 0401
Category ID: MAT_EQUI
Created New Category in standard hierarchy R3PRODSTYP
MAT_EQUI
Product Type: 01 Material
Object Family: 0401 Equipment
Set Types attached are
COM_TA_MANUFAC
COM_TA_R3_ID
COM_LOCAT_ADDR -
Condition Table download to CRM from ECC
Hi
I have to download condition tables created by customer(say A872, A888) into CRM system.
When I see the adapter objects R3AC5, there is no adapter object present for the same.
Please tell me what are the sequence of steps required for the same. Like mapping tables to adapter object..doing any other config or development for download.
Thanx in advance.
Cheers
HitsHi Hits,
The condition table A500 onwards are the customer specific tables which SAP provides. So you need to create your own adaptor objects for these tables. The steps are really simple.
Copy the adaptor object DNL_COND_A002 and give the name ZDNL_COND_A872 follow the same step to create object ZDNL_COND_A888.
Reffer to the oss note 514952 which might also required.
<b>
Reward points if it helps!!</b>
Best regards,
Vikash. -
How to update Factory calender in CRM from ECC?
Hi All,
Factory calenders are downloaded to CRM from ECC, using adapter object DNL_CUST_CAL_C in Initial load (R3AS). My doubt is, whenever a new holiday is added to Factory calender in ECC, how the particular added holiday will be downloaded to update the same in CRM system?
Please help me.
Regards,
MaddyHello Maddy,
In my system download object DNL_CUST_CAL_C is for the download from the CRM (online) database to the old consolidated database (CDB, for the offline Mobile Sales scenario). You could see this in transaction R3AC3.
For your scenario I don't know how to download. This thread here speaks of a manual adjustment in transaction SCAL.
http://scn.sap.com/thread/274825
Best regards,
Thomas Wagner -
Can we download employee data from ECC to CRM using standard middleware?
HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PVStandard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda -
Postcode can't replicate to CRM from ECC
hi,guys,
I found the postcode field and city field could not replicate to CRM from ECC,but other fields can replicate conrrectly.why?Our CRM system is 7.0 EHP1.Hi Raymond,
Are you able to solve your problem. As I am facing the same issue. But I am trying to replicate from ECC TO CRM.
When I am changing Address like City in R3 and checking BDOC in crm its green and showing change city. But when I am checkign Business partner master date change city is not reflecting.
Regards
Nishith -
How to pull resource (equipment) times into BI from ECC
Hi Experts,
i want to know How to pull resource (equipment) times into BI from ECC plz help me to this..
plz tellme step by step analysis ....how can find the data sources ....
Its very argent.........plz any one help me
VenkatHi
Didn't understand your question. Do you want to extract that field from R/3? Please elaborate -
Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM
Hello,
we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
Bdoc Type:PRODUCT_SRV
Thanks,
adiAdi,
Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
Best regards,
Brian. -
How to activate delta download for BP from ECC to CRM
Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.gHi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b> -
Download ztable data from ECC to CRM 7.0
Hi,
I have created ztable in ECC and CRM 7.0,(tables are same).Now I want to downlaod data from ECC to CRM.
Table should only be updatable from ECC. No maintenance required in CRM.How to achieve this?
Please suggest me.
Thanks,
Brahmajicreate customizing adapter objects in R3AC3.
copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code.
load object in R3AS.
create a variant and shedule the based on requirement -
Condition records not generated in CRM from ECC
Hi all,
I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully.
I got all the condition types, access sequence and tables.including CUSXXX tables.
I have also got few condition records for condition types SAPXXX . I am not able to get the condition records for the CUSXXX tables.
Suggest me how to proceed further.
Regards
Yaswanth.KYes I have checked the SLG1. There were one error..
"No Entries Determined for the A Tables (Block 1)"
I am not able to judge how to proceed with that error.
The detailed Text is diapleyed under..
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Regards
Yaswanth.K -
Replicating Custom Fields for Products in CRM from ECC
Hi All,
I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
this new settype to MAT_HAWA. (As all our materials fall under this material type).
2. I am looking to map SAP standard field from ECC to this custom field of mine.
I wrote the code in CRM BADI
'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
DATA: ls_category_bdoc TYPE COMT_PROD_CAT_REL_MAINTAIN,
ls_category TYPE COMT_PROD_CAT_REL,
lt_categories TYPE COMT_PROD_CAT_REL_TAB,
ls_settype TYPE COMT_settype_ext,
ls_cat_settype_rel TYPE COMT_CAT_FRAG_REL,
lt_cat_settype_rel TYPE COMT_CAT_FRAG_REL_TAB,
lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
EXPORTING
IV_SETTYPE_GUID = ls_cat_settype_rel-frgtype_guid
IMPORTING
ES_SETTYPE = ls_settype
EXCEPTIONS
NOT_FOUND = 1
NO_IMPORT_VALUES = 2
NO_TEXT_FOUND = 3 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE ls_settype-frgtype_id.
WHEN 'ZMASTER_INFO'.
ls_ZMASTER_INFO-relation-owner = 'X'.
ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
ENDCASE.
ENDLOOP.
Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
Could anyone please suggest if i am missing anything here? Any help is appreciated.
Thanks,
Karuna.Hi Karuna,
One more solution is to change the BDoc data content before it hit the Database.
this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
How does delivery info flow back to CRM from ECC ?
Hi Experts,
How does the delivery info (Quantity Delivered present in the table CRMD_CUMULATED_I) get replicated from ECC to CRM ?
Is it through the middleware ? If not, how ?
Any pointers would be of great help.
Regards,
Kris.hie kris,
did u have any answer?
regards,
marry. -
Product Hierarchy download into CRM from ECC6
Hi Guys,
Recently we have added few Product hierarchies into ECC6 (level 2, 3 , 4 and 5 hierarchies)
now they are not replicated into CRM...
how can I replicate them into CRM from ERP6... quick guidance....?
The object - DNL_CUST_PROD1
Thanks
KPit will be done maually,
- On CRM
For Defining the Product Hierarchy Strucuture :
CRM IMG -> Cross Application Components -> SAP Product -> Product Category -> Define Category Numbering Schemes
- make new entry
Number Scheme R3PRODHIER
- after that select the new Scheme, and choose a new entry (should be the same as structure PRODHS on ECC)
For Defining Product ID
CRM IMG ->Cross-Application Components->SAP Product->Basic Settings->Define Output Format and Storage Format of Product Ids (tx. COMCPRFORMAT)
note : should be matched with ERP (Tx. OMSL)
refrence B09_BB_ConfigGuide
الحمد لله الذي علمنا -
Equipment download: R3 -- CRM
Hi,
The equipment BOM in R3 contains serialized(equipment) and non-serialized materials.
When we download the equipment BOM from R3, the corresponding equipments are viewable in CRM, through the install base. However, the non-serialized materials are not viewable...even though they exists as materials in CRM.
Would appreciate to know if anybody has faced a similar problem.
Regards,
RajibHi Rajib,
Serialization for service products is not activated in out-of box CRM. You need to activate this functionality by enabling the required product view. This will solve your problem for sure.
Please refer to the following link for detailed explanation on product serialization
http://help.sap.com/saphelp_crm50/helpdata/en/42/b64f027b8f311ce10000000a1553f7/frameset.htm
<b>Do not forget to resolve if helps</b>,
Regards,
Paul Kondaveeti
Maybe you are looking for
-
Dear All, I am creating a report on Multiprovider to analyze Plan vs Actual amount. Plan data is sitting in one cube and actual data is sitting in another cube. Now both individual cubes data are correct. I have combined both cubes by MP. Now there a
-
How to set more than one day in calendar?
Hello. Is there a way to set more than one day in calendar and every selected day would create new record? Thanks.
-
CWA/ISE/WLC - client timeout when redirected to portal.
Problem: When connecting to the CWA ssid, the client gets redirected to: https://lab-ise01.lab.local:8443/guestportal/gateway?sessionId=3c02a8c00000000878430a51&action=cwa but the link times out. I'm currently following this guide: https://supportfor
-
[solved]pacman seems to be stuck in infinite loop
Hi, All I was trying out gnome2.20 which is till in testing. Installation of the packages was smooth, but I could not start X after the installation. The Xorg logs said that there was no X sever installed while the It was listed in the pacman -Q I de
-
HT4528 My phone says its charging all the time but wont turn on
My phone says its charging but wont turn I have it plugged in all day long and it just continues to show the low battery on the front! About every 6hours it will turn on for 5 minutes then shut right back off! Idk what's going on please help! All the