Equipment master : user status

Hi,
Where do I get to see USER STATUS of an equipment master.
Regards
nandini

Hi,
When you open equipment master on the header below description you have status available. There you will find a symbol i in Blue color, when you select this icon it will take you to another screen where on left side you can see System status and right side you can see the User status.
You can assign the user status profile to the equipment category level. or if any user status profile's are declared for equipment relavent in configuration then you can select the same by going to the screen as mentioned above.
Hope it's helpful.
Regards,
N.Nagaraju

Similar Messages

  • Config User Status to the Equipment Master User Status

    All,
    I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.

    Hi,
    For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
    Regards,
    Maheswaran.

  • Status not visible in Equipment Master

    Hi,
    I am not able to view the System Status and User Status in Transaction IE02, 'General Data' Screen. However if I click on the Status button, the system and user statuses are seen ('Change Status' screen).
    Is there any config setting that I have to do?
    Thanks.
    Raj

    Raj,
    Please check in SPRO under PM &CS >>> Techinical object>>>Equipment >>>Assign User Status Profile to Equipment Category >>> Status profile
    Check wheather for perticular equipment status category status profile is assigned or not ?
    Riyaj

  • System status and user status don't appear in maintenance order

    I can't see the user status or the system status in the maintenance order header or equipment header or any report although when pressing the button information you can see it

    Hi Michael Nawar ,
    Please check have you define Status profile and status in T code OIBS ?  , and for object like PM order whether you have assigned it to your defined order type in T code OIOG ?
    and for equipment check in SPRO Master Data in Plant Maintenance and Customer Service >> Technical Objects >> Equipment >>Assign User Status Profile to Equipment Category.
    Riyaj

  • Additional filed in Equipment Master IE01

    I want to add additional fileds in Equipment Master - user field
    Is there any user exit & Badi for this, i need Drop down also for these fields for report purpose
    Thanks
    Prakash
    Edited by: prakash balasubramanian on Jun 4, 2008 6:08 AM

    Bala,
    Have a look at user-exit ITOB0001via TCode SMOD
    Also see BADIs EQUI_SCR* via TCode SE18
    Have a look [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] for a list of PM/CS user-exits, BADIs, Etc
    PeteA

  • Deleting user status profile in equipment master

    Hello experts,
    can anyone tell if it's possible to delete a user status profile. Once we used an user status profile in an equipment i cannot find i way to delete or change the profile to another profile.

    Hi,
    You can only change the user status profile in the equipment provided no status value has been set. Once a status value is set (maybe as intital status) the field is closed for input and no change can be made to the profile.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • Urgent: error: user status ECUS is active for equipment.

    Gurus,
    My material is assigned to only one serial no. and one equipment.
    I am trying to do pgi from va02 and the system is throwing an error saying ' user status ecus is active for equip.' but in iq02 when we check the ecus status is not active. infact when we change the user status to anything the error thrown is still the same. Kindly reply urgently as this is affecting the clients production process.
    Thanks,
    Anand.

    hi
    i think once you have delivered the material ,it will create the equipment master record record stating the status as installed at customer site,
    the status you have said i think is user status ,if so kindly change the user status and proceed with the above said procedure
    revert back with any further queries
    regards
    thyagarajan

  • System status and configuration tab in equipment master.

    Hi,
    Will some one expalin following points.
    1.Can we add / modify system status in configuration.-if yes path for the same.
    2.Is system status  linked to user status-if yes path for the same.If no on whhich basic system status is changed .
    3.What is use of configuration data tab in equipment master.Is this required for creating work order,notification ,task list etc.Is their any link between equipment master and material master.
    Thanks & Regards
    Vinay

    Vinay,
       1. Yes you can add modify system status using transaction BS22. However these are system delivered functionality and its not advisable to change these.
      2.Its the other way around. User status can be linked to system status through the configuration for user status.Double lick on the user status definition to reach the system status dependencies editor in transaction OIBS.
    3. Equipment master and material master can be linked either through serial number functionality (Material number + serial number =  Equipment number) or through the "Construct" field(Structure tab)  in the equipment master. The configuration data tab is used to link equipment master to a pre-existing variant of material. [Sap Help|http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/01/d5454a4ab311d189740000e8322d00/frameset.htm]
    Regards
    Narasimhan

  • USER STATUS TABLE FOR ORDER MASTER

    Hi
    Please reply the Data table name for the field "USER STATUS" under control data tab of Order master.
    Regards
    Prakash.

    Hi,
    The statuses for orders are strored in JEST table.
    Regards,
    Eli
    P.S. Please, avoid posting in CAPITAL letters

  • System status in equipment master

    Hello all,
    In the equipment master the system status is showing ESTO HUAS SLOR. Is this correct? The material with this serial number is in stock - so ESTO i s valid. But it is not assigned to any sales order (Cross checked table EQBS)...What makes this combination work (System status).
    Also, in the action log it says previously it was assigned to sales order but now its in inventory. How to correct this. Please help.
    Thanks
    RJS

    Hi,
    Please clarify that after assigning to sales order have you performed return delivery? Because of this might the link between ESTO and sales order is not there. To assign the ESTO to sales order as EDEL  go to the trx BS22, search the status EDEL. Then , you double-click on short text, Search operation PMS8 and set flag "enable" o "warning". Whit this setting, You can post a delivery whit status ESTO EDEL. Hope it works. Thanking you.

  • Equipment User Status Update

    Dear Gurus,
    I want to update equipment user status with PM Order Status.
    for example, if i close the PM01 - Maintenance Order , equipment user status will be updated "001-Fixed".
    how can i update the user status like above example? I have found some user exit (STATTEXT) but it is not working in PM order. Is there any user - exit for this case?
    thanks for your help.

    Mahee,
    you are right, i guess my example is not clear for this case. I wrote this basic example for easy understanding.
    anyway, i wanna write a scenario, we have 4 user status for equipments. we wanna run with PM order status and good movements. equipments are on our customers so that we can refurbish and fix on the field or our refurbishment center.
    1.  if equipment is come  from customer for refurbishment , equipment status will be updated "001-waiting for refurbishment"  with good issue.
    2. if equipment is refurbished, (refurbishment)order will be completed so equipment status will be updated " 002- refurbished"
    3.if equipment is not refurbished, (scrap) order will be opened for removing equipment's spare so equipment status will be updated " 003- scrap"
    4.if equipment's spare is removed, (scrap) order will be closed and equipment status will be updated " 004 - write off"
    I hope it will be cleared.
    there is a bapi for updating equipment user status"BAPI_EQUI_GETSTATUS" but i don't want bapi because of locking the equipment. which can i use user-exit or badi for this case?
    thanks for your help

  • Movement Type 122 and Equipment Master status

    Using Movement type 102 (Reversal Goods Receipt) the Equipment master status is reset to
    AVLB and the stock batch is deleted.
    However movement type 122 (Return Delivery to Vendor) does not do this.
    Is there anyway to modify movement type 122 so that it works like 102 ?
    Regards.
    Phil.

    If it is a Return to vendor - 122 movement type transaction, the reason for the movement is that the equipment is defective or some issues are there and that is the reason it has been returned. Given 122 movement type is designed to reflect such a business scenario, how you are expecting that this should result in Equipment status to become AVLB.
    So the question is why are you posting 122 if it is not real return due some defect ?

  • User statuses for equipment,functional location,order,notification

    Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
    Regards,
    Vivek

    Vivek,
    There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the  business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
    You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
    Hope it is helpful to you.
    if you want further detail please revert.
    DP

  • EQUIPEMENT - User status and system status

    Hi freind,
    It would be great help if someone can brief me on  procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
    regards
    Pravin

    hi Pravin,
    Check this out
    <b>USER STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
    <b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
    <b>USER STATUS</b>/<b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
    Regards,
    Santosh

  • User Status History on Device Master Record

    Hello experts - I am in the process of investigating a defect and like to see the User Status history on the Device. For some reason the user status history is not part of the change documents maintained on the device. Help!

    Hello Mehul
    Can you please check the data element of the field. In the further characteristics tab you have a check box to maintain change document. It should be checked. After that goto SCDO Selectobject click generate program if required.
    Thanks
    Rajat

Maybe you are looking for