Equipment Replication from ECC to CRM 6.0
Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.
Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!
Similar Messages
-
Custom data for equipment load from ECC to CRM 7.0
Dear All,
Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
Thanks & Regards
DBHi,
You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from ECC to CRM are downloaded.
For more details jut go through
http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
Best Regards,
Rajendra -
Customer replication from ECC to CRM
Hello everyone,
I am having some difficulty replication a customer from ECC to CRM.
In our environment, customers are generally created from CRM & then replicated to ECC.
Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
Since I am a SD Consultant, I was thinking of extending the customers in ECC.
I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
I cannot see any BDOC in SMW01 also.
Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
Do I have to check any additional objects which I need to check ?
Or is it that no settings means nothing created in ECC would come over ?
Can anyone guide me so as to understand why this is happening.
Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
Thanks
Vin
Edited by: vinit parkar on Aug 3, 2010 10:58 PMHi,
If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
Cheers
Binai -
Issues in employee replication from ECC to CRM through ALE/IDOC
Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George -
Business partner replication from ECC to CRM
Hello community!
I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ECC, CRM, PI systems are registered in SLD.
And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
The thing that i cann't find:
What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
Thank you in advance, DzmitryThe list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry -
Problem in customer replication from ECC to CRM
Hi experts,
When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
Partner (): the following errors occurred
Incorrect input data:
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
Why the Bdoc messae is not getting populated with correct value?
Also how I can see the data which is being sent from ECC. Is there any Idoc or something created at ECC outbound side where I can see the sent data?
Where in XD01 bdoc message is being created?
Please help.
Regards,
VimalHi Vimal,
You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
Thanks,
Rohit -
Business Partner replication from ECC to CRM based on Company code
Hi:
I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
Trying to maintain Filters for CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code. I get this error " Table not maintained in smoftables."
Checked table " SMOFFILFLD" to see there are no entries for KNB1.
While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
BR,
Dzmitry -
"Error in validation" in order replication from ECC to CRM.
Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
JerryHi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane -
Order replication from ECC to CRM
Hi All,
The requirement is we have different order types for example, ZOR, ZGW, KE in ECC out of which we would like to replicate only ZOR order type orders. So I used Adapter SALESDOCUMENT in CRM and set filters with AUART (Order type) EQ ZOR and ERDAT (Creation Date) GE '04/05/2010' so my assumption is if any ZOR order is created after 04/05/2010 they will replicate to CRM.
And I created transaction type ZOR in CRM and ZGW, KE are not created in CRM as I do not need them. I checked CRMFILTAB and the filters are there but the issue is:
Everytime I create ZOR order in ECC these order are replicating fine. There are 2 BDOCs generated R3AD_'CUSTOMER' and CSA_ORDER_'Order number' successfully...so far so good.
Whenever I create any order with ZGW, KE Orders, even these orders are trying to replicate to CRM and getting failed as we do not have ZGW, KE Order types in CRM. The BDOC is R3AD_XXXXXXX is failing with the following error messages.
-->Processing of document with Guid A6BE324C3C92B353E10000000AFEC80C is canceled
-->Business transaction type ZGW does not exist
-->Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
For example, if the order is created for customer 7719, In SMQ2, R3AD_0000007719 as failed and this is blocking all other 7719 customer related changes. How to make these other orders not even try to replicate to CRM and fail.
Please advise.
Thanks,
Sharath.Hi Shekar,
Thanks for the Reply.
Here are my versions
CRM --- CRM 2007
ECC --- ECC 6.0
I know we are eligible for Scenario A but I haven't activated the Scenario A settings as of now. What we did was, we made the message in ECC from Error to Warning so that it'll allow us to change the order created in CRM. I wasn't aware of the scenarios during that time as I was new to CRM, recently I went through and need to activate them in the system.
In CRMPAROLTP Table, these are entries I have
CLIENT PARNAME PARNAME2 PARNAME3 CONSUMER
300 CRM_EXIT_BEF_DATA_TRANSFER CONDITIONS CONDITIONS CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTACRMB CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTAIPMI CRM
300 CRM_EXIT_CRM_GET_QNAME BEABILLSTAIPMO CRM
300 CRM_EXIT_CRM_GET_QNAME BUPA_REL CRM
300 CRM_FILTERING_ACTIVE BUPA BUAG_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA BUPA_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA BUPA_REL CRM
300 CRM_FILTERING_ACTIVE BUPA CUSTOMER_MAIN CRM
300 CRM_FILTERING_ACTIVE BUPA CUSTOMER_REL CRM
300 CRM_FILTERING_ACTIVE BUPA_HIERARCHY BUPA_KNVH CRM
300 CRM_FILTERING_ACTIVE CONDITIONS CRM
300 CRM_FILTERING_ACTIVE EQUIPMENT EQUIPMENT CRM
300 CRM_FILTERING_ACTIVE MATERIAL MATERIAL CRM
300 CRM_FILTERING_ACTIVE VEND VENDOR_MAIN CRM
300 CRM_NO_BEFORE_IMAGES SALESDOCUMENT CRM
300 CRM_RELEASE
Please let me know, if I am missing anything. Do you think activating Scenario A is important? I think my versions suite that I need scenario A, If I am not wrong.
Thanks,
Sharath. -
Replication of Material Changes from ECC to CRM
Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe -
Replication Z-Tables from ECC to CRM
We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM, anybody have any information about this.
Thanks in advanced
SebasHi Sebas,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
You can also try this
1. Create the Ztables both in ECC and CRM
2. create customizing adapter objects in R3AC3.
3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
4. create a variant and shedule the based on requirement
Thanks and regards,
Madhukar Reddy -
Downloading Material Master data from ECC to CRM
Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.
Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components SAP Products Basic Settings Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management Transactions Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty -
Transfer z-table data from ECC to CRM via Middleware
Hi,
I need to transfer some z-table data from ECC to CRM using middleware. Does someone have any tip or reference link?
AndréHi,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
Regards,
Susanta -
Replication of functional location and equipment from ECC to CRM.
Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar. -
Equipment Replication Error from ECC to CRM
Hi,
We are trying to replicate the Equipments form ECC 5.0 to CRM 2007 facing some error in CRM like inbound queue is not generated and our queue generated with status SYSFAIL error massage is u201CBAPISTRUCTURE_NAME_UNDEFINIEDu201D. I checked in ECC out queue status is STOP. We are done the Material Master and Customer Master Data Replication form ECC to CRM successfully. Activated the Equipment related objectives and done the Initial Load we are facing the problem for Equipment.
Please advise me
Thanks in advance.Hi,
In the SAP Help of Equipment Replication from SAP ECC to SAP CRM following are prerequisites:
Integration
The initial download of data is triggered in SAP CRM and is executed by middleware. Uploads and delta downloads take place automatically when data is changed in SAP CRM and SAP ERP respectively.
To use this function you require the following releases, or higher:
■SAP CRM 7.0 (with active middleware)
■SAP enhancement package 4 for SAP ERP 6.0
You can have a look at the full help link @
http://help.sap.com/saphelp_crm70/helpdata/en/46/cc79505ec61525e10000000a114a6b/frameset.htm
Can you check the Bdoc Messages and mention the Error and the Status of the Queues of the Equipment Adapter Object EQUIPMENT.
Hope this will help.
Thanks,
Samantak.
Maybe you are looking for
-
My Macbook pro keeps freezing while playing videos
experience frequent stalls/hangs, accompanied by the spinning beach ball progress indicator every time I play video's. weither it be on youtube or VLC player or any video player for that matter. It happens during games I have on here and also happens
-
Apple Studio Display 15" (Blueberry) Problems
When I try to use this monitor with from any source, vertical lines show instead of the actual picture. They quickly fade away and then quickly come back in different colors.
-
My friends in my scenario employee who goes for long term disability during his first period(three month) he should be deducted 75% of pay during his second period(three month) he should be deducted 50% of pay remaining period 10% of pay. For me for
-
Hi, I have a java package which contains several java classes. Package name Util Contains lets say 3 Classes but further classes could be added in the future. I need to know how many classes are in this package. So im wondering is it possible to a co
-
Run as Administrator Windows 7
Hi All, When we run a client in SBO 2007 A as administrator in Windows 7, we get an error: Application has a problem. Diagnostic File C:\Program Files\SAP Business One\Log\Sap Business One_20110823085854.dmp was created. Please contact support and at