EQUIPMENT replication to CRM from ECC

Hi,
Appreciate, if some one can help me in solving my issue with EQUIPMENT Master.
    Below is the procedure I followed to replicate EQUIPMENT Master
     Through R3AC1 transaction EQUIPMENT object is filtered for one equipment number.
     Adapter object EQUIPMENT is used to do the initial load.
     Here Validation BDOC is genearted, with the filtered value.But no notification BDOC is generated.
     No Equipment or IBase is created in CRM.
Can some one tell me, what are the settings I need to do before replication of EQUIPMENT?
Regards,
PBP
Message was edited by:
        SAP CRM

SAP Implementation Guide 
Cross-Application Components 
SAP Product 
Basic Settings 
Allow Product References for Individual Objects
Created New Entry, with check box selected for Reference Active
Created New Entries
Customer Relationship Management
Master Data
Installed Base
Replication of Equipment from SAP ECC Customer Service (CS)
Define Default Settings for Equipment Replication
Maintained Below entries:
Site Name: EAS
IBase Category: 01
Product Type: 01
Object Family: 0401
Category ID: MAT_EQUI
Created New Category in standard hierarchy R3PRODSTYP
MAT_EQUI
Product Type: 01 Material
Object Family: 0401 Equipment
Set Types attached are
COM_TA_MANUFAC
COM_TA_R3_ID
COM_LOCAT_ADDR

Similar Messages

Equipment Download to CRM from ECC

Hi All,
We are trying to download the equipments from ECC to CRM, they are downloading to CRM individually.We want to get them in the hierarchy structure as they are in ECC. Like relevant IObjects grouped to-gether.
Whats the solution for this, please help out on this.
Thanks,
Praveen

Hi,
Below link you can find the details for replicating the Equipment from ECC to CRM.
SPRO> CRM>Master Data--> Installed base --> Replication of equipment from ECC --> Prerequisites and General Information for Equipment Replication
For equipment config download below are the activities.
Initial Download Procedure
1. Activate the adapter object EQUI_CONFIG in mySAP CRM.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Object Management > Business Objects and select the active/inactive box for EQUI_CONFIG.
Examine the filter settings for EQUI_CONFIG. For a each source site, set the filters to the same settings as for the object EQUIPMENT.
Don't forget to regenerate the filters!
2. Start the initial download process for EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Initial Load > Start.
Delta Download Procedure
1. Activate the object class EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Delta Load from R/3 Back-End.
You may wish to activate the EQUI_CONFIG delta download if you are downloading changes for EQUIPMENT.
If you want R/3 to apply filters during the delta download, use transaction SM30 and maintain view CRMPAROLTP as below:
Parameter name = CRM_FILTERING_ACTIVE
Parameter Name 2 = EQUI_CONFIG.
Parameter Name 3 = EQUI_CONFIG
User = CRM
Parameter Value = X
Hope this helps.
Regards,
Chandrakant

Postcode can't replicate to CRM from ECC

hi,guys,
I found the postcode field and city field could not replicate to CRM from ECC,but other fields can replicate conrrectly.why?Our CRM system is 7.0 EHP1.

Hi Raymond,
Are you able to solve your problem. As I am facing the same issue. But I am trying to replicate from ECC TO CRM.
When I am changing Address like City in R3 and checking BDOC in crm its green and showing change city. But when I am checkign Business partner master date change city is not reflecting.
Regards
Nishith

How to update Factory calender in CRM from ECC?

Hi All,
Factory calenders are downloaded to CRM from ECC, using adapter object DNL_CUST_CAL_C in Initial load (R3AS). My doubt is, whenever a new holiday is added to Factory calender in ECC, how the particular added holiday will be downloaded to update the same in CRM system?
Please help me.
Regards,
Maddy

Hello Maddy,
In my system download object DNL_CUST_CAL_C is for the download from the CRM (online) database to the old consolidated database (CDB, for the offline Mobile Sales scenario). You could see this in transaction R3AC3.
For your scenario I don't know how to download. This thread here speaks of a manual adjustment in transaction SCAL.
http://scn.sap.com/thread/274825
Best regards,
Thomas Wagner

How to pull resource (equipment) times into BI from ECC

Hi Experts,
i want to know How to pull resource (equipment) times into BI from ECC plz help me to this..
plz tellme step by step analysis ....how can find the data sources ....
Its very argent.........plz any one help me
Venkat

Hi
Didn't understand your question. Do you want to extract that field from R/3? Please elaborate

Replication of Customer from ECC to CRM --- Multiple A/c Groups

Hi Experts,
I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
Now, I want to replicate customers with 5 other A/c groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
Thanks and Regards
Varun Taneja

Hi Robert,
I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
I hope I am clear about my requirement.
Please share your feedback.
Thanks and Regards
Varun Taneja

Replication Z-Tables from ECC to CRM

We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM, anybody have any information about this.
Thanks in advanced
Sebas

Hi Sebas,
The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
Replication of Z table from CRM to R/3 - No mBDoc Created
You can also try this
1. Create the Ztables both in ECC and CRM
2. create customizing adapter objects in R3AC3.
3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
4. create a variant and shedule the based on requirement
Thanks and regards,
Madhukar Reddy

Replication of Quotations from ECC to CRM

Hello Experts,
The scenario is as follows:
I am required to replicate all the quotations from ECC to CRM.
My question is: what are the various middleware settings to be done?
I have created a transaction type for quotation by the same name in ECC and CRM so far.
It would be great if I can get help on the following:
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
2.What action profile do I need to maintain on ECC and CRM side for quotation?
3.How should the number ranges be defined on ECC and CRM side for quotation?
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
What more needs to be done?
Once the settings are complete and fool-proof, I know I can run an Initial Load (R3AS) on the object: SALESDOCUMENT from R/3 to CRM.
What are the filter settings to be maintained in SalesDocument Object?
Experts, this is my requirement and all the pointers would be greatly helpful.
Many thanks,
VSK.
Edited by: venkatskumar on Feb 16, 2011 12:17 AM

Hello
Please find below my reply :-
1. What are the item categories that I need to maintain on both ECC and CRM side for Quotation?
>> You can make a Z copy of the standard Quotation Item categories in ECC and CRM.
2.What action profile do I need to maintain on ECC and CRM side for quotation?
>> Action profile settings are specific to your business scenario. You need to define ACTION Profile in ECC. In CRM you can have an ACTION PROFILE and assign it to the CRM Transaction Type
3.How should the number ranges be defined on ECC and CRM side for quotation?
>> If ECC is a leading system for quotation creation, the number range will be EXTERNAL in CRM and assign this EXTERNAL number range for CRM Quotation Transaction Type
4. Do I need to do a Cross-Copy Control of quotation from ECC and CRM at the transaction and item category level?
>> Yes
5. Do I need to assign the Quotation Type (ECC) to ERP Profile on CRM side?
>> Not sure on this. Requesting other experts to answer this.
6.Can the transfer of quotations from ECC to CRM happen only after replicating the product and customer data from ECC to CRM?
>> Yes. The master data such as Material, Customer, Pricing should be downloaded to CRM, if the quotation needs to be replicated to CRM.
Hope this will be helpful.
Regards

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Replicating Custom Fields for Products in CRM from ECC

Hi All,
I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
    this new settype to MAT_HAWA. (As all our materials fall under this material type).
2. I am looking to map SAP standard field from ECC to this custom field of mine.
    I wrote the code in CRM BADI
    'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
DATA: ls_category_bdoc       TYPE COMT_PROD_CAT_REL_MAINTAIN,
      ls_category            TYPE COMT_PROD_CAT_REL,
      lt_categories          TYPE COMT_PROD_CAT_REL_TAB,
      ls_settype             TYPE COMT_settype_ext,
      ls_cat_settype_rel     TYPE COMT_CAT_FRAG_REL,
      lt_cat_settype_rel     TYPE COMT_CAT_FRAG_REL_TAB,
      lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
      CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
        EXPORTING
          IV_SETTYPE_GUID         = ls_cat_settype_rel-frgtype_guid
        IMPORTING
          ES_SETTYPE              = ls_settype
       EXCEPTIONS
         NOT_FOUND               = 1
         NO_IMPORT_VALUES        = 2
         NO_TEXT_FOUND           = 3 .
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
CASE ls_settype-frgtype_id.
      WHEN 'ZMASTER_INFO'.
      ls_ZMASTER_INFO-relation-owner = 'X'.
      ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
      ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
      ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
      APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
      APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
   ENDCASE.
ENDLOOP.
Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
Could anyone please suggest if i am missing anything here? Any help is appreciated.
Thanks,
Karuna.

Hi Karuna,
One more solution is to change the BDoc data content before it hit the Database.
this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Condition records not generated in CRM from ECC

Hi all,
I have downloaded objects DNL_CUST_CNDALL, DNL_CUST_CND , DNL_CUST_PRC, from ECC to CRM successfully.
I got all the condition types, access sequence and tables.including CUSXXX tables.
I have also got few condition records for condition types SAPXXX . I am not able to get the condition records for the CUSXXX tables.
Suggest me how to proceed further.
Regards
Yaswanth.K

Yes I have checked the SLG1. There were one error..
"No Entries Determined for the A Tables (Block 1)"
I am not able to judge how to proceed with that error.
The detailed Text is diapleyed under..
Diagnosis
No entries have been transferred from R/3 to CRM for one of the following reasons:
1. The R/3 condition table does not contain any entries.
2. The maintenance authorization has been transferred to CRM. This means that data in the R/3 condition table can no longer be downloaded from R/3.
System Response
Error message CND_MAP 312
Procedure
If this maintenance authorization has been transferred to CRM in error, this can be transferred back in exceptional circumstances so that a data download from R/3 is possible.
Regards
Yaswanth.K

How does delivery info flow back to CRM from ECC ?

Hi Experts,
How does the delivery info (Quantity Delivered present in the table CRMD_CUMULATED_I) get replicated from ECC to CRM ?
Is it through the middleware ? If not, how ?
Any pointers would be of great help.
Regards,
Kris.

hie kris,
did u have any answer?
regards,
marry.

Vendor replication in SRM from ECC

Hi,
We have a requirement for replication of email address for vendor from ECC to SRM.
The email addresses are stored in ECC on the vendor master (XK03 transaction).The e-mail can have multiple email addresses where Vendor Master team specifies EFT in the “notes”.
Now for all the email addresses if notes section of email address has any value like *EFT* this email address for the Vendor in SRM should not be replicated, it means for Vendor in SRM email address should show blank value.
Please share your ideas how to proceed for this solution.
By,
Kalpana

Hi,
The standard replication of vendors is done through tcode BBPGETVD (program BBP_VENDOR_GET_DATA).
This program is for the initial replication of vendors. Afterwards, BBP_VENDOR_SYNC will be batched for new vendors/updates to vendors.
Email address is in table ADR6 (by address# ADRC). You can get the ADRC# by Vendor # in table LFA1.
Regards,
Rafi

Replication of materials from ECC 6.0 to SRM

Hi ,
1 ) Please tell me the steps for replicating the Materials from ECC6.0 to SRM.
2) if we are trying to push the P.R from ECC 6.0 to SRM (PDP Scenario) whether the material should be
there in SRM already?
Regards
G.Ganesh Kumar

Hi Andrea,
I write to pull the master data from ECC as per the guide line given in the link. But there some problem. No master data is being transferred to SRM server from the ECC.
I am stuck in the process R3AS. When I am running the transaction and seeing the status in R3AM1, the indicator shows, the program is running.
But when I see the report through SMQ1, the staus is SYS Failure. on further drill down, The error is " The current application triggered a termination "
Can you help me in sorting out the problem and when I have gone wrong. If you have any documents for step by step procedure for the same, can you forward to my id, darpan2k6 in gmail.
Regards
Edited by: imdarpan on Mar 12, 2010 5:53 PM

Standard IDOC/BAPI to create work order in CRM from ECC PS

Hello Guys,
Any input on any standard IDOC/BAPI I could use to create a work order in SAP CRM based on the data feed from SAP ECC (Project systems)?
Any help on this would be really appreciated.

Hii.
Did u get answer of SAP-> XI->CRM. IF so, share wid us.
I m stuck in same kinda scenario

EQUIPMENT replication to CRM from ECC

Similar Messages

Maybe you are looking for