Equipment specific contract determination in notification

Hi Guys,
Superior equipment is assign in contract. Superior equipment's contract auto determine when I am creating service notification for sub equipment. I do not wants auto determination of Superior equipment's contract while creating service notification for sub equipment. Please suggest how I can achieve this.
Thanks

Hi Harshvardhan,
This is standard behaviour. If your superior Equipment assigned to any service contract, while creating service notification for any of its sub ordinate Equipment, system will determine contract
If you don't want this to happen, you can change the settings of your notification type in OIM9
Uncheck the field AUTO CONTRACT DETERMINATION
Uncheck and try to replicate
regards,
santosh

Similar Messages

Contract determination in service order for PPR items

Hi Experts,
Contract data is not being determined for some items in service order. All these items are assigned to product list in service contract using product range or PPR.
1) PPR is created with the type "sales contract"
2) In the categories section assigned the relevant category ID's
3) PPR is assigned to the service contract under product list.
4) Service order is maintained for contract determination 'D' - determination both at header and item level
5) When a service order is created I see that expected items are not showing the contract data.
Any suggestions - any specific setting I am missing
I found a SAP note for same problem in previous versions of CRM. (5.0 to 5.1)
but we are on BBPCRM 6.0
Thank you
Ram

Hi Shalini
                i am trying to create a service ticket from WEB IC by confirming Account and Ibase and then creating service request and able to save without error.
            if i end session and open the service request again in change mode and if delete the ibase, then appeas the message
"You should run a new contract selection for item 0000000010", going through OSS notes, but found nothing.
           Contract Determination is set to 'E' : Assign at Item leve : Assign immediately if unique for transaction type ZXXX.
if i open the service ticket in CRMD_ORDER and go in change mode if i click process action button next to error, this will disappear. but it comes when i assing a ibase to the request, so its working only when i create.
any sort of help will be appreciated.
Thanks
Gopi

Service Contract Determination in Follow-Up Transactions

Hi all
in our setup (CRM 2007) we can successfully create Service Orders where Contract Determination on item level takes place and assigns items to contracts. This also works for Service Confirmations, in case we create them as stand-alone transactions.
If we however create a Service Confirmation as follow-up from a Service Order, in which contract determination took place, the contract information is not contained in the Service Confirmation.
Any ideas how to get the contract information over?
Thanks!
Christian
Side note: We did not find a copy routine or copy control settings solving our problem - however we might be wrong...

Hi Christian,
If the service order line items are entittled to service contract , at each item level you will get contract info in contract data tab.
when you transfer these items to confirmation , confirmation item contract data will not have contract information. Only when you enter items in confirmation manually then system will pop up window for selection contract and confirmation items get contract information.
thanks,
Nitin

Service order Item category on Contract determination

Hi
We have contract determination on CRM service orders and it is working as expected. Our Service contract makes the Service order free of charge but its still generates the debit memo in ECC system with zero value.
We don't want this to happen so a work around will to have the item categories different when the Service order has a contract. These item categories will not be configured for ECC billing integration in R/3 plug-in hence no debit memo will be generated.
My question to Service gurus is that is there another way of achieving this? if not is there a way to flip the item category after contract determination without putting in any code.
Thanks and Regards
Rupesh Patil

Rupesh,
I dont think we can flip item category without coding..!. but certainly possible with coding.
Regards, Sudeep..

List of PO with reference to a specific Contract

Hi,
Anyone knows if exists any standard transaction where one can see the Purchase Orders created with reference to a specfic Contract, or if I have to creat a query to do so?
Best Regards,
Pedro Mariano

Thanks Shiba, but I want to see is the PO made with reference to a specific contract, so what have to be my input is the contract.
I checked t-codes ME3L, ME3M, ME3C and ME3N, and in no one of them did I find the connection between contracts and PO's.
Best Regards,
Pedro Mariano

Contract determination form the service order

Hello everyone,
I am working on CRM 5.0 service order and service contracts.
I created an IBase and I assigned it to the products in the service contract on the item level (in object list) and the same I did on the item level in the service order (in object). But When I enter the product in the service order it gives me an error that a "new contract for the item 10 should be run" with execution choice to run it.
After I ran the contract I found the product price is not picked from the service contract and picked form the pricing of the service order and a message in the tab page contract that no contract has been determined
The IBase created contains only the product ID and quantity field and linked with a business partner sold to party
Is it possible to make the contract determination depends only on the organizational structure and sold to party and remove the Ibase form this determination
Thanks in advance
Jacopo François

Hi Pratik Patel
I want to know why this problem happen the error message "new contract for the item 10 should be run" shows that there is a contract have been determined but the product price is not picked from the service contract and picked form the pricing of the service order and a message in the tab page contract that no contract has been determined
Would you please help me to implement this badi?
Thanks
Jacopo François

Contract determination on change of Price List Type on Pricing Tab for item

I need to to re-trigger the Contract determination for a document item when the price list is changed. Currently the only BADI i can see this working with is the pricing Badi. The only issue is that I get a linking error when going from no assignment and then changing it so that the item then has a reference to an item on the contract

Dear All,
I have fulfilled this by doing rev acct determination in vkoa using item category and moving it up the order. Also I used a requirement in v/08 for 100% discount on free material.
This has resolved my issue and i am now closing this thread.
Thanks and Regards,
Rohan
Edited by: Lakshmipathi on Apr 2, 2011 10:53 AM
Since you have arrived at a solution, please change the status of the thread to "Answered"

Service Contract Determination for material product

Hello,
I am trying to implement service contract determination for a complaint and I observe that the service contract gets determined at the complaint item level only when I add a service type product at the item level and not when I add a product of material type. Is this a system limitation that a service contract can be determined only for a service product or am I missing some configuration? Has anyone else faced a similiar issue?
Thanks,
Divya.

hi divya
the contract get determined even after adding product of type material
1.create a srv contract (sc)
2.add product of type material
3. release the contract and save it (note the no.)
4.create a trnx complaint(crmc) maintain the setting fr contract determinition(F)
5.put the product in trnx and ur contract will get determined
see if it suffice ur requirement
"reward points if u find useful"

Service contract determination for service request

Hi,
is there a way to influence the contract determination in a service request creation process?
The contract should be found if there is one for sold-to-party OR ship-to-party.
Thank you.
Kind regards
Manfred

Hi Manfred,
I don't know about "Ship-to arty" use in contract determination. AFAIK Sold2-Party, Sales and Service Organization, status of the Service Contract (released), Start and End date and the object list are responsible for the Contract determination. Hence if I'm not wrong a sold2-party must be provided.
There is the CRM_SERVICE_CONTRACT Badi and what we did in our process is to use the Event framework to ensure a contract redetermination after change of the sold2-party. Take a look at CRM_SEARCH_SERV_CONTRACTS_EC for ideas in that direction.
Regards,
Hendrik

Problem in service contract determination using spare part items

Hi experts
I created a service contract with spare parts in product list, and discont for those spare parts in price agreement. The spare parts item category group is SRVM.
If I then create a serice order and add the spare part as the item of the transaction, depends on item category I put in for the spare part, contract determination may or may not happen. If I put SRVP ( service product) as item category then the contract determin will happen. But SRVP is not allowed for the spare part product. If I use SRVM as item category, then the contract determination will not happen at all.
The questions are
Can contract determination be triggered by item category SRVM? If yes, what do I have to do to make it happen? If no, what item category can I use for spare parts to trigger the contract determination?
Your help is highly appreciated.
Ming

Hi
Please check following link.
http://help.sap.com/saphelp_crm70/helpdata/en/c1/315dc323e64f43b1e2ff92ff077d5b/frameset.htm
Regards,
Srini

Plant Specific Tax Determination

Hi Experts,
I have a Requirement for my client for Plant Specific Tax Determination.
Currently Freight Service Tax is determining from the value assigned in FTXP to all the Sales Orders accross all the Sales Org and Plants.
But now the Requirement is to get different Services Taxes with respect to Plant/ Sales org.
Pl Explain Step by Step.
Thanks in Advance.
Srinivas

Dear Mr. Lakshmipathi,
Thank u for ur response.
I tried the same procedure before posting the thread itself, but its not working.
coz, if we want to access Taxes from Pricing procedure, we should give Accounting key for the relevant Cond type in pricing procedure. But in our pricing procedure all the Tax condition types are Statistical and not needed any accounting key. Mainly our requirement is Not to Disturb the existing accounting entries.
We r using TAXINN Procedure.
All the Tax cond types r accounted through Taxinn Procedure only.
In Taxinn Procedure, for Freight Service Cond type Access Seq is MWST(Tables- Country & Tx Cl No.)
But in Pricing Procedure, for Freight Serv Cond Type Access Seq is JDUM(Sap Standard one)
During Sales Order, system is considering only MWST Condition Record, that is FTXP or VK19
But this should be Plant or Sales Org Specific.
So Please Help me to solve it.
Thanks in Advance,
Srinivas.

Auto task determination in Notifications

Hi,
Does anyone help me out in Auto task determination in Notifications.I have completed all SPRO settings but still the task is not populating in notifications.
Defined Response profile
Defined Service Profile
Assigned Notification types to Response Monitoring.
Is there any other settings apart from it.
Best Regards,
Arun

Hi Arun
Please refer the below link
http://help.sap.com/saphelp_dimp50/helpdata/en/2a/cef814ecbd11d2958500a0c93029cf/content.htm.
You need to use user exit- ICSV0002: Automatic task determination for service notifications

Equipment Specific Anual Maintenance Contract

Hi friends,
Plant Maintenance-For an Equipment, if a 'Anual Maintenance Contract' is created through a Maintenance order on an external Vendor for a specific period, during that validity period, the SAP system should nt allow to process any further maintenace order for the same equipment. Please suggest a solution.
SR
Edited by: siva.rao on Jan 21, 2010 11:34 AM

Hi Sweta,
Please maintain separate class for AMC and define different characteristics (AMC duration,vendor) to it and assign to equipment for which you want to maintain the AMC.
And when ever vendor perform certain activity on the AMC equipment,Obviously you will create Work order based on the AMC equipment,so that will capture how many times vendor has visited the site and perform the operations (From IW38 or IW39,just give the AMC equipment and execute)
you will get the report.
Regards,
Srinika

Setting user specific contract data while creating sales order using BAPI

Hi all,
I am creating sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2.
Now my problem is that there is no structure for contract data (i.e. VEDA), system automatically set contract data using customization values.
I am doing some validations on cotract data in MV45AFZZ which fails, because these validations are performed on standard values, user specific values r not set.
How to handle this issue, your small clue may help a lot.
Regards,
S@meer

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

On Work Order using Object lists for equip u can manually create Notifi

On a maintenance Work Order using Object lists for equipment you can manually create a notification for each line item.
We want to automate this process to do this when we save the document.
Any ideau2019s on how to do this?
Does a user exit exist for this?

Hi:
Check with Tcode: IBIP - Plant maintenace batch input utility tool.
Hope, it may help!
Thanks,
Murali.

Equipment specific contract determination in notification

Similar Messages

Maybe you are looking for