Equipment with projects how to?

Hi all!
Here are some questions about equipment, I only want to get an image about it.
Can you explain for me how equipment is use agains the project, on which object, WBS, networks, activities or all? (I saw that I coud use it in work centers but this only for the usage not for the creation)
How do I use equipment if I have a investment project and assets, can I use this asset to make an equipment?
Can I use an equipment like an asset?
Is an equipment build of a set of materials in a structure or a BOM?
Is there any economic information there or is in a project I have it or the asset?
Any other information is appreciated.
Regards
Jose Marin

With an utility such as Carbon Copy Cloner.
(63008)

Similar Messages

How can I get the class(ification) for an equipment with BAPI ?

Hello Experts,
I have created an Equipment with a BAPI. ("BAPI_EQUI_CREATE")
and i create the assignment to a (equipment-)class with the BAPI BAPI_OBJCL_CREATE.
When I use another BAPI BAPI_EQUI_GETDETAIL I get all information to the equipment,
but I don't get the information to wich class is it assigned.
How can I get this ?
Thanx in advance

Hi,
As Keshav mentioned you can get the classification data by using BAPI_OBJCL_GETDETAIL
you have to pass the following parameters to it.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = equipment no in your case
objecttable = 'EQUI''
classnum = Class Name
classtype = Class Type
Thanks.

How to process Fisacl year change for Investment Management with Project?

How to process Fisacl year change for Investment Management with Project as measure

hi
check this menu path
Accounting --> Investment Management --> Programs --> Periodic Processing --> Fiscal Year Change

How can i filter just te equipment with date to 31129999 ??

Hi ,
How can i filter just te equipment with dateto 31129999 ?? i need just the valid equipment with dateto 31129999 but this char i cant take it to filter, how can i do this?

In the Update tab of the InfoPackage, you can select the Time-Dependent data. In this, if you only want to extract Equipment Master Data Attributes or Master Data Text for effectivity dates of current date through 31-Dec-9999, you can create a routine for the time interval by updating it as such:
CONSTANTS: c_max_date TYPE d VALUE '99991231'.
p_datefrom = sy-datum. "Current Date
p_dateto = c_max_date. "Max Date

How can I tell if my HP Pavilion DV7-6B55DX is equipped with Bluetooth?

How can I tell if my HP Pavilion DV7-6B55DX is equipped with Bluetooth?
I have installed the Intel Centrino drivers without error, however I cannot find anything related to bluetooth connectivity. How can I figure out if I actually have it? ( I have seen conflicting information on the reviews )
Thanks!

Windows 7 or 8 will pick up a bluetooth module and it will show up in device manager even if the completely correct driver is not installed. If you have no bluetooth device in device manager you ain't got bluetooth.

How to deliver 2-tier project with Project Builder?

Hi all,
I am playing around with Project Builder and try to deliver form with Delivery Wizard in 6i.
However, I am unable to select the radio button where we ask Project Builder to create installation script. It is gray out.
Am I missing something here? Any tip is appreciated.
Cheers,

Hi Wandeson,
The OLAP products are:
Oracle 9i Release 2 Enterprise Edition, which includes the OLAP option.
Front end:
For custom analytic applications, use BI Beans and JDeveloper. Current release is 9.0.3.
For more details, please read the Business Intelligence Technical Overview OTN:
http://otn.oracle.com/products/bi/content.html
http://otn.oracle.com/products/bi/pdf/bi_overview.pdf
Oracle 9i OLAP:
http://otn.oracle.com/products/oracle9i/datasheets/olap.pdf
http://otn.oracle.com/products/bi/9iolap.html
Hope this helps,
Katia
BI Beans PM

I have few muse projects how can I integrate them in an another muse website which I have just created?

i have few muse projects how can I integrate them in an another muse website which I have just created? How can I make link between HTML document inside muse. The Html document (saved on my desktop )is another web project done with css3 and Html but for my portfolio I need to create an HTML link so the project can be viewed by others.

Perhaps with iFrame Builder Lite | Exchange | Adobe Muse CC ?

Can anyone share with me how you write Javadoc?

Can anyone share with me how their companies write Javadoc?
Are your developers solely responsible for it? Do your technical writers own it or review it? How do you make sure it's good?
Right now, my software developers are mostly responsible for writing all the API info and it's of poor quality and really lacking details. I don't mean spelling/grammar-type problems. My developers just don't seem to "get" what information to include, no matter how many guidelines or checklists I give them.
A very simple example is:
* Gets the status
public java.lang.Integer getStatus() {...}With no indication of what status values may be returned and what the values might mean.
How do you ensure that what you write is actually useful? Please help!
I'm aware of the method Sun recommends, but I want to know what others do.
Thank you

Hi,
Well, concerning the question what a good API documentation should be. Just imagine, you are a programmer and you want to use that API. You need to know how it works. There can be only three ways to find it:
(1) The API documentation
(2) Probing experiments. Even a good documentation may not describe everything. Sometimes, the only way to understand certain things you particularly need may be guessing something, writing a code basing on it and see how it works. Then, guessing something again, more precisely now, and so on. Even a very good documented API (for instance, javax.swing) may require that sort of approach to be able to use it eventually.
(3) At last, when source codes are available, one may look at them and try to understand precisely, what a particular method actually does.
I think the better the API documentation the less one may need to endeavor those two last steps. There is actually a limit about it. Without any proper explanation at all, one may never be able to use a particular API, neither after probing it nor after looking at source codes (that is not to say the sources may be simple unavailable at all).
Concerning how to write the API documentation, that's mostly the question of managing your team. I think, basically, the original source of the ultimate information about everything implemented in the projects are those very programmers (developers) and, probably, some software architects. But those guys normally are not especially eager to write any documentation (especially developers). That your example just demonstrates it. It seems, your programmers just wrote that "Gets the status" for you to make them leave in rest after that. In addition, the programmers normally have such a sort of work and activity that does not match particularly well with the writing literature and doing their main job simultaneously. You should not enforce them to do that!
To write a good documentation, you will need to engage a technical writer. That's normally a guy with some programming background. However, writing some literature is actually what he does the best. (Sometimes, such people do something else about written word beyond the technical writing.) The job of that guy would be to write the documentation. This will take from him (or her) two basic things:
(1) The ability to understand the whole software system (that's where his programming background will be needed!);
(2) To communicate with the programmers who have developed the stuff and to obtain from them all the necessary information they know. That may require some personal (verbal) communication with them, because asking them to write everything again will only result in the same "Gets the status" explanations. However, to be successful in this, the technical writer needs to have some explicit management approval behind him. Otherwise, some of the guys will avoid speaking to him at all (saying they lack the time). So, the management should assign them the necessary priority for such communications.
Particularly big projects may even need to have the whole team of technical writers.
Anyway, writing docs is a hard work. But it is extremely important! The good documentation may both increase your sales and eliminate lots of expense on further support of your customers.
Regards,
Leonid Rudy
http://www.docflex.com

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

Integrating Exchange Server in the cloud with Project / Sharepoint Server internal

Hi,
I wonder how do I integrate service Exchange Server with Project Server 2010.
I have a Project Server 2010 you need to send emails with project updates and other integrations with Outlook.O standard procedure is to perform procedures (run commands in Exchange Server Shell) and create users in Project Server.
But I have a situation where my client uses a service exchange in the cloud and not a server for internal mail.
How do I integrate Project Server with Exchange this scenario where the mail server is an external service (cloud)?
I made the settings as the procedure () but got no success, no mail was received to be alert or reminder:
Below are the screens with the settings that were made.
Crawl Resource Configuration (http://technet.microsoft.com/pt-br/library/ee806927(v=office.14).aspx)
1) I Installed SMTP service on my server.
2) I made the configuations above
3) I configured the outgoing/Ingoing Setting in Sharepoint Central Administration

Hi Marcelo,
Without providing the extended rights to project user, I dont think you will be able to successfully integrate project server with exchange cloud. Here is the technet article about how to integrate it with extended rights which needs running commands running
on exchange server:
http://technet.microsoft.com/en-in/library/ff468700%28v=office.14%29.aspx
Vikram Daruru - MSFT

Planning ETM Equipment in Project ...

Hello Everybody
I m planning machine hours of ETM (Equipment & Tools Management) equipment in my project. I have done all the necessary settings required and are getting requirement generated automatically in ETM planning board without making requisition note. Planning board is also letting me assign PS requirement to ETM equipment but is not allowing me to create shipping document from planning board. When i press SHIPPING button on planning baord, message appears that " NO RECIPIENT COULD BE DETERMINED" !
Recipient and sender are mentioned in requisition note which i have avoided as i have generated requirement from my PS Project. Can anyone advise if i have to create requisition note for the requirement generated from PS Project as well or i could enter recipient in PS project as well?
I know this question is more related to ETM, but PS Gurus might help me as this is one the requirement of construction industry of EC &O Projects and equipment machine hours are planned in Projects.

Hello Everyone Again
I have found answer myself.
Recipient of ETM Requirement generated from PS Project has to be created through VD01 (Create Customer) with Project Definition as recipient type.
This recipient type allows certain project definition to be entered in customer master data which becomes the recipient while making shipment document of equipments.

Project Online with Project Pro for Office 365

Hi,
I have several licences for Project Online with Project Pro for Office 365.
Project Web App is working fine, as well as Excel Web App, Word Web App...
I just miss Project Pro for Office 365. I don't know were to find it, how to activate it :-(
Thanks for your help !

Please find the link for activation
http://technet.microsoft.com/en-us/library/gg982959.aspx
for trouble shooting
http://support.microsoft.com/kb/2745026
http://social.technet.microsoft.com/Forums/projectserver/en-US/bbd848ab-b383-46b7-b968-91d233d252eb/how-to-install-project-online-and-project-pro-for-office-365?forum=projectprofessional2010general
kirtesh

Change Table Fields in "Costing" in with Project System (PPM 5.0)

Dear Gurus;
I need to know, how can I change fields in "Costing" with Project System (Project Management in tab name "Accounting").
The integration works well, but I need to view the values of: Actual, Plan and Commitment.
In the Standard way, just only can see the Plan (with the colum "Costs").
Please, help.
Best regards.
Mariano.
Edited by: Mariano Sabiche on Apr 27, 2011 3:17 PM

Hi Mariano
The particular screen you are referring to will only show the planning on Easy Cost Planning due to the labour costs and revenues planned on the cProject. You can use the services&deatil on the assignment - click on the WBS assigned to get the detailed list of services for the assigned WBS element. You can then click on Detail Data to get detailed data on the assigned WBS element. If you want a report with all the data, best use the BW cubes for that to combine cP and PS data.
Hope this helps
Regards
Duan

Zoom operation crashed Acrobat with Project 2007 content

I have some PDF created with Project 2007 contents on them. These file can be view normally. However, as soon as I zoomed in the MS Project content within the PDF, Acrobat crashed, regardless when it was standalone or within a browser. Can someone advice what the problem might be?
Thanks
uminds

Acrobat is capable of most of what you are asking for. The user can click on a part to select it, then, by right-clicking on the selected part they can select "Zoom to part" from the context menu. I am unsure how to author a 3D model so that the individual part information shows up in the Data panel of the sxtructure tree, but I have seen many files that do exactly that. I believe that this has to be done in the authoring application. As for the detailed 3D model of the individual part, Acrobat 3D gives you the ability to authro different views, which can contain individual parts. The best way to do this is to make the view of the individual part a Comment View. This type of view maintains all of the specific issues of the view.
I think that all of the attributes you've asked for are supported by Acrobat 3D in one way or another.

OTL with Projects and Payroll Integration - Actual Costing

How does the costing work when we have the OTL integrated with Projects and Payroll? (R12.2.4 functionality - Actual Costing)

As explosion process is based on elements, it only applies to payroll. You can use this functionality with Projects and Payroll Timecard Layout, but project will get the non exploded hours.
--Shiv

Equipment with projects how to?

Similar Messages

Maybe you are looking for