Equipments in Service notification
Dear Fnds,
While iam creating Service notification i can enter only one Equipment ...but i want to enter more than one Equipment in Service notification.
We are selling multiple Products lets say X and Y..
If 2 product come for service at a time....so need to enter 2 Equipemt in one service notification.
Thanks in Advance
Regards
raj.
Dear Fnds,
But in my case i need to maintain the 2 or more Products in a single Service notification.
Lets say iam manufacturing Laptops and Mobiles..
In Laptops i have around 100 products and in Mobiles i have around 100 products.
some time iam getting Laptop-123 and laptop-0099
I need to book the notification as two equpments.
Thanks in advance
regards
raj.
Similar Messages
-
Creation of Service Notification and filling certain fields
Hi,
I am trying to create a service notification document from inside dunning activity (TR FBVB).
The steps that I followed are
A custom FM is configured which is called after dunning event ISU_DUNNING_BLOCK_DEVICE_0350. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE. This FM creates the relevant service notification document for the disconnection order.
The problem we face in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
Our requirement is to have the service notification created via the above fields populated in it.
Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53)
Regards,
Imranhi eshwar
you can create service order by using the service notification,
create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you want to create
hope this will clear you
regards
thyagarajan -
Creation of Service Notification No for SO.
Hi everyone,
I am working on the User Exit for the first time. Kindly help me out with the following requirement.
When a sales order is saved, create a service notification and link to the sales order header.
To fulfill this requirement we need to use the following:
Program SAPMV45A, Include MV45AFZZ, USEREXIT_SAVE_DOCUMENT
BAPI to create service Notification is : BAPI_ALM_NOTIF_CREATE
When the service notification is created, the following fields should be populated in the notification as the end result:
1. Sales Organization (VIQMEL-VKORG)
2. Distribution Channel (VIQMEL-VTWEG)
3. Division (VIQMEL-SPART)
4. Sales office (VIQMEL-VKBUR)
5. Sales Group (VIQMEL-VKGRP)
6. Notification short text should contain the sales order number (VIQMEL-QMTXT)
7. Sales Order (VIQMEL-VBELN)
The following fields should be updated in the sales order as the end result:
1. Notification number (VBAK-QMNUM)
I need to check if notification no. needs to be created or not. Also, the notification type should be valid. If not I need to throw a warning mess. but SO no. should be saved. if the condition is satisfied then BAPI should be called and notification no. should be created.
In case if BAPI fails then handling should be done with the help of the transaction SLG1.
Please provide me technical help.
Regards,
AyushiHi Ayushi,
In the Include MV45AFZZ you need to write you code.
First check for whcih service notification. I mean Notification Type.
Then use you BAPI if it is correct for the notification type.
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
EXPORTING
notif_type = p_header-tables-mnmisc-notif_type
notifheader = p_header-tables-mnhead
task_determination = p_header-tables-task_determination
orderid = p_header-tables-mnmisc-orderid
IMPORTING
notifheader_export = l_head
TABLES
notitem = l_it_item " Since you dont have any items to create leave it blank.
notifcaus = l_it_caus " Since you dont have any causes to create leave it blank.
notifactv = l_it_act " Since you dont have any activities to create leave it blank.
notiftask = l_it_task " Since you dont have any tasks to create leave it blank.
notifpartnr = l_it_part "etc ditto
longtexts = l_it_text
return = l_it_return.
read table it_return index 1 / read table it_return TYPE = 'S'
if sy-subrc = 0.
lv_notNumber = MESSAGE_V1 / MESSAGE_V2 .
message 'Notification created' with lv_notnumber type 'S'.
endif.
The above logic is a Psuedo or a hint only. Hope this helps.
Thanks & regards,
Bhargav.
Finally in the user exit give the message -
Create multiple sales orders from single service notification?
Is it possible to create multiple sales orders from a single notification (IW51)?
We currently create sales orders directly within transaction IW51 (Create Service Notification). We kick off the sales order creation by pressing the "SALES ORD." button in the notification screen. We're now interested in creating a 2nd Sales Order which would tie directly to the same Service Notification. This is so that we can have the second order assigned to a different account assignment WBS (there are two different parties doing work on the service notification).
I assume you would have to go to VA01 to create the Sales Order, but am not sure how to tie it directly to the service notification from here. I treied to do a create with reference, but there is no ability to create with reference to a service notification.
Do I have to create a second service notification for the 2nd Sales Order for this to work? I want to avoid doing this if at all possible.
I'm running SAP R/3 Enterprise
Thanks for your help!Hi,
go to vtaa- copy controls for sales document to sales document.
select your combination of order and quotation go to item level. There select value 0(zero) in field positive/negative negative.
No need to change update document flow.
After setting zero in copy control that be told on above. create order with respective to the quotation.
After saving the order.
go to document flow to see the status in between quotation and order.
If you placed setting right, then u certainly observe for quotation status will be open. so you can create no. of sales order with respect to that quotation..
Have a good day.. -
Creation of items in Service Notification
Hi,
I am trying to create a service notification document from inside dunning activity (TR FBVB).
The steps that I followed are
A custom FM is configured which is called after dunning event <u>ISU_DUNNING_BLOCK_DEVICE_0350</u>. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE to create a service notification from the disconnection order. This FM creates the relevant service notification document for the disconnection order.
The problem I am facing in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
Our requirement is to have the service notification created with the above fields populated in it.
Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53 to view service notification)
Regards,
ImranHi Imran:
Could you please Function Module ISU_S_DISCDOC_CREATE instead of
ISU_S_DISCDOC_CHANGE ?
Hopefully your problem would be resolved.
Regards
Shashi -
Unable to view Service notification in CIC fact sheet
In the Customer Interaction Center for Utilities(CIC0), I'm unable to view a certain service notification under a custom fact sheet. However, if I try to view it by accessing CIC from ECC, it is visible there. What could be the possible issue?
It is working fine now. Actually I had some DML configuration data in the old DS and it got replicated in the new DS instance. So whenever I click on the ServiceConfiguration tab it tries get some config details about that service and ultimately fails to get so. When I deleted the entry in LDAP, I can see all the services available.
--lakshmi -
How to block a material that not to creation of service notification thru-IW51
Hi All,
I have tried in all over areas ( MM02 level and MM06 level ) to block a material that not to create service notification with that material but didn't get a solution.If any one knows solution for this kindly provide me.
"How to block a material that not to create a service notifcation thru IW51?"
Best Regards,
Narendra KonnipatiNarendra,
1. I do not see any possibility without using this exit. It is a very simple and effective thing for your ABAPer and you too.
2. In case of many Materials-Notification type combinations, you can maintain similar code by joining several elseif s.
3. Alternatively, you can maintain a Z Table as under:
QMART
MATNR
S3
10000000099999
S3
10000000099988
S1
10000000088988
S2
12000000088988
Means, for every Notification type there will be one or more prohibited materials. The coding will not be difficult, but will have around 15/20 lines.Finally, if you have to get your issue resolved, I feel this is the way and also easy way through your ABAPer.
Tell me in case of any further opinions.
Best of Luck
KJogeswaraRao -
Link Between Service Notification and Sales Order
Hi All,
In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
Please guide me.
With Regards
Vinu.NHello Vinu
For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
That is a solid link right there.
I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
Hope this helps. -
Planner group is not updated in service notification using BAPI
Hi,
Planner group is not updated in service notification using BAPI BAPI_ALM_ORDER_MAINTAIN.
I have written the below code, but planner group is not updated in the service notification.
Please advice which parameters do i need to pass to update planner group in the service notification.
wa_methods-refnumber = '000001'.
wa_methods-objecttype = 'PARTNER'.
wa_methods-method = 'CREATE'.
wa_methods-objectkey = wa_subscr1-aufnr.
APPEND wa_methods TO i_methods.
wa_methods-refnumber = '000002'.
wa_methods-objecttype = 'HEADER'.
wa_methods-method = 'CREATE'.
wa_methods-objectkey = wa_subscr1-aufnr.
APPEND wa_methods TO i_methods.
wa_methods-refnumber = '000000'.
wa_methods-objecttype = ' '.
wa_methods-method = 'SAVE'.
APPEND wa_methods TO i_methods.
REFRESH i_partner.
CLEAR wa_partner.
wa_partner-orderid = wa_subscr1-aufnr.
wa_partner-partn_role = 'VW'.
wa_partner-partn_role_old = ''.
wa_partner-partner = wa_subscr1-parnr.
wa_partner-partner_old = ''.
APPEND wa_partner TO i_partner.
REFRESH i_planrgrp.
CLEAR wa_planrgrp.
wa_planrgrp-orderid = wa_subscr1-aufnr.
wa_planrgrp-plangroup = wa_subscr1-ingpr.
APPEND wa_planrgrp TO i_planrgrp.
REFRESH i_planrgrp_up.
CLEAR wa_planrgrp_up.
wa_planrgrp_up-orderid = wa_subscr1-aufnr.
wa_planrgrp_up-plangroup = 'X'.
APPEND wa_planrgrp_up TO i_planrgrp_up.
*----Change order details with Technician name
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = i_methods
it_header = i_planrgrp
it_header_up = i_planrgrp_up
it_partner = i_partner
return = i_return.
Thanks & regards,
KrishnaTry this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL. " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0. " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a® -
Sales order with reference to Service Notification
Hi Freinds,
I have to create a sales order with reference to Service notification (IW51). can someone sugggest me BAPI or Function module to perform this task.
Appriciate your help.
Best regards
Pravinno std bapi's as far as i know..when you hit create create repair order(in iw51) system calls QM06_RMA_ORDER_CREATE
..whick internally calls SD_ORDER_CREATE..may be this should give some pointers..
Regards
Siva -
Why is creation of a service notification using BAPI not working?
I need to create a service notification.
I have found 2 BAPIs.
BAPI_SERVICENOTIFICAT_CREATE
BAPI_SERVNOT_CREATE
The code below using the second BAPI is not creating a notification and the return parm does not have any errors.
You can see it does a call to commit after the BAPI call
Perhaps I am missing something critical in the parms.
We are trying to creat a service type notification using equipment.
DATA ls_notif_h TYPE bapi2080_nothdri.
data ls_notif_e type BAPI2080_NOTHDRE.
DATA lt_return TYPE STANDARD TABLE OF bapiret2.
DATA ls_return LIKE LINE OF lt_return.
ls_notif_h-equipment = '10000044'.
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
TASK_DETERMINATION = ' '
SENDER =
ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
NOTITEM =
NOTIFCAUS =
NOTIFACTV =
NOTIFTASK =
NOTIFPARTNR =
LONGTEXTS =
KEY_RELATIONSHIPS =
return = lt_return
IF lt_return IS INITIAL.
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
ls_return.
ENDLOOP.
Thanks.
ScottTry this way
CALL FUNCTION 'BAPI_SERVNOT_CREATE'
EXPORTING
* EXTERNAL_NUMBER =
notif_type = 'S3'
notifheader = ls_notif_h
* TASK_DETERMINATION = ' '
* SENDER =
* ORDERID =
IMPORTING
NOTIFHEADER_EXPORT = ls_notif_e
TABLES
* NOTITEM =
* NOTIFCAUS =
* NOTIFACTV =
* NOTIFTASK =
* NOTIFPARTNR =
* LONGTEXTS =
* KEY_RELATIONSHIPS =
return = lt_return
* IF lt_return IS INITIAL. " <<< Comment this lie
read table lt_return into ls_return with key type = 'E'. " << Change
if sy-subrc ne 0. " << Change
COMMIT WORK AND WAIT.
write: / ls_notif_e-NOTIF_NO.
ELSE.
LOOP AT lt_return INTO ls_return.
WRITE:/ 'errors'.
* ls_return.
ENDLOOP.
endif.
a® -
BAPI for Service Notification Creation (with address)
Hi Friends,
Could any one help and let me know if there is a BAPI which helps to create a Service Notification and has the capability to update the address fields in that Service Notification. I am aware of the BAPI "BAPI_SERVNOT_CREATE" but it does not have the capability to update the address fields (like name1, name2, street, city, region, email address etc). Thanks in advance.
Regards
SidRavi ,
Thanks for your passing me the bapi , when i use it the program goes to dump , its regarding the category , what has to be passed to the category ,
As of now i m passing Notification type , Requestor , Code grp and activity code.
Sorry for not Rewarding points in time , i was at lunch , -
Hi,
Is there any BAPI or a direct input program,that would enable me to update a Service Notification.The BAPI should have reference to the QMEL table of Service Notification.
We have added two custom fields to the Additional Tab1
of the standard Service notification transaction namely
IW51 and also to the QMEL table.I want a BAPI which would help me update these two custom fieds in the QMEL table.
Please help me solve this requirement.I will reward the perosn with points.
Regards,
Amit.BAPI_SERVICENOTIFICAT_CREATE ?
or
BAPI_SERVNOT_MODIFY_DATA ?
Rob
Message was edited by: Rob Burbank -
BAPI to update ALNZN while creation of Service Notification
Hi Folks,
I want to update ALNZN ( condition after malfunction in system condition tab of IW22/IW52) using BAPI/FM while NOTIFICATION CREATION.
I tried with most bapi's mentioned below but all of these dont have field for system condition tab.
BAPI_SERVICENOTIFICAT_CREATE.
ALM_PM_NOTIFICATION_CREATE
BAPI_ALM_NOTIF_CREATE
BAPI_ISUSM_NOTIF_CREATEMULTIPLE
BAPI_QNOTIFCAT_CREATE
BAPI_SERVNOT_CREATE
BAPI_QUALNOT_CREATE
IWON_NOTIFICATION_CREATE
Please suggest standard method to create service notif along with QMEL-ALNZN
And also we need to update existing notif with same field, please suggest for NOTIFICATION UPDATE functionality as well
Thanks,
MozilaNot possible with BAPI.
Use BDC or direct update on QMIH table -
Updation/Creation of service notification
I want to create a service notification using transaction iw51& iw52. The notification has a few custom fields to be updated I am using BAPI_SERVNOT_CREATE to create the notification but i am not able to update the custome fields the BAPI doesnot have Extension_In/Extension_out fields also. I have tried using BAPI_ALM_NOTIF_DATA_ADD , BAPI_SERVNOT_MODIFY_DATA , BAPI_SERVNOT_ADD_DATA these too have the same issue. I want to know the BAPI which can be used for updating the custom fields
I am prefering to use BAPI instead of BDC.
Kindly Respond urgently.
Thanks.Hi Ayushi,
In the Include MV45AFZZ you need to write you code.
First check for whcih service notification. I mean Notification Type.
Then use you BAPI if it is correct for the notification type.
CALL FUNCTION 'BAPI_ALM_NOTIF_CREATE'
EXPORTING
notif_type = p_header-tables-mnmisc-notif_type
notifheader = p_header-tables-mnhead
task_determination = p_header-tables-task_determination
orderid = p_header-tables-mnmisc-orderid
IMPORTING
notifheader_export = l_head
TABLES
notitem = l_it_item " Since you dont have any items to create leave it blank.
notifcaus = l_it_caus " Since you dont have any causes to create leave it blank.
notifactv = l_it_act " Since you dont have any activities to create leave it blank.
notiftask = l_it_task " Since you dont have any tasks to create leave it blank.
notifpartnr = l_it_part "etc ditto
longtexts = l_it_text
return = l_it_return.
read table it_return index 1 / read table it_return TYPE = 'S'
if sy-subrc = 0.
lv_notNumber = MESSAGE_V1 / MESSAGE_V2 .
message 'Notification created' with lv_notnumber type 'S'.
endif.
The above logic is a Psuedo or a hint only. Hope this helps.
Thanks & regards,
Bhargav.
Finally in the user exit give the message
Maybe you are looking for
-
Exchange 2007 - ValidPorts key data keep reverting
Randomly on my exchange server (Exchange 2007 SP3 with Rollup 14 on Server 2008 R2, fully patched), the validports registry value data revert from the data I entered to the "default" data. The "default" values I'm describing are machinename:ports and
-
I have been trying to insert a spry horizontal menu bar on my site ( http://www.davisbrotherscabinetmakers.com/dbmc/index2.php) Everything displays fine in Firefox but does not display correctly in IE. Any suggestions? You can access the Spry stylesh
-
Java Sqlite Connection in Linux
I am getting the following connection error between Java and Sqlite in Redhat Linux OS: Unable to load sqlite: java.lang.UnsatisfiedLinkError: /usr/local/lib/libsqlite_jni.so: /lib/i686/nosegneg/libc.so.6: version `GLIBC_2.7' not found (required by /
-
Duplicate library within Aperture 3
I'm a novice user whose not gonna know all the relevant information the knowledgeable and helpful folks will need to thoroughly answer my question, but here's the best I can do. Perhaps with specific questions, I'll be able to provide more informati
-
Motivations to buy a Mac Powerbook
Dear all, I am thinking to buy a Mac Powerbook. However, I need advice from Mac fans. What are good and bad points about using a Mac Power book? Thanks a lot! SONY Windows XP