Equium 100-147 upgrade to windows vista home premium

Have been upgraded for 9 months but get compatibility error windows appearing for various toshiba drivers. On opening toshiba assist/protect&fix/preinstalled drivers/tools&utilities it lists everything as my old xp media centre. Can this page be upgraded to vista.
Thanks for help
Robin

----- Original Message -----
From: robin
To: [email protected]
Sent: Saturday, May 31, 2008 2:50 PM
Subject: Equium laptop model PSAABE
Hello
In dec 2006 I purchased an equium laptop which was installed with windows xp. It had a free upgrade to windows vista home premium in june 2007
All the Toshiba driver info on the laptop still refers to windows xp and I wondered if a package can be downloaded to
update all the drivers to vista and change the Toshiba Assist/Protect & Fix/Preinstalled Drivers Depository/Tools & Utilities window to read Vista Home Premium instead of Windows xp.
Thanks for advice
Robin

Similar Messages

  • Tx2120us, upgrade from Windows Vista Home Premium 64bit to Windows 7 Ultimate 64 bit

    I wonder if there's anyone out there who has managed to sucessfully upgrade his/her HP tx2120us tablet PC from Windows Vista Home Premium to Windows 7 Ultimate or to do a fresh Windows 7 ultimate install on a HP tx2120us tablet PC.
    I purchased a Windows 7 Ultimate 64bit edition AND a 320GB 7200rpm hard drive and started a fresh Windows 7 installation. After the installation was done, the network adapters fixed and wireless were working. I also managed to install the Audio drivers for the built in realtek audio adapter. Even the touchpad, touchscreen and pen seem to work but then I stopped after several attempts to install a suitable display driver for the NVIDIA G-Force video adapter. The resolution with my Vista OS is 1280 x 800 but the default Windows 7 OS only provides a generic 1064 x 768 resolution and not any download from HP could install a suitable NVIDIA driver for Windows 7.
    As I stopped there I don't even know if there is a driver for the card reader or the Light Scribe DVD burner and whatever is buit in into this tx2120us.
    I'd really very much appreciate if someone who had succeeded with the installation of Win 7 Ultimate 64bit on the tx2120us could provide me with working drivers or the links to them.
    thanks

    Palm does not support 64-bit Vista for cabled Hotsyncs.
    There is a huge Vista64 bit thread at the top of this section explaining your options - BlueTooth Hotsync is about the only way you can procede with a Centro.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Upgrading from Windows Vista Home Premium to Vista Ultimate

    Hi all
    I am trying to upgrade my windows Vista from home premium to ultimate and I have the original CD for the ultimate but when I put the CD and upgrade it wont upgrade and it gives me this message:
    " - The upgrade cannot be started. To upgrade, cancel the installation and the choose to upgrade to a version of windows that is more recent than the version you are currently running."
    And my computer is up to date so I dont understand is there something messing or I have to install a clean version of windows Vista?!
    And if I have to install a clean version is the any way to install the windows without deleting my documents ?!
    Hope someone will help me :D
    Thx

    To be honest I don't know how it works exactly and maybe you should ask this on some Microsoft forum or make call by Microsoft in your country. I think they are the right address for such issues.
    Of course you can make clean Vista installation. All your data can be saved if you have two partitions and all important data will be saved on second partition. When Vista installation starts for Vista destination choose first partition. This partition will be deleted but all your data on second partition will be untasted.
    If you have more questions let us know.

  • Windows 7 upgrade and existing Windows Vista Home Premium license...?

    Hi,
    As per Lenovo's scheme, after applying for Windows 7 64 bit upgrade and upon receiving the installer DVD, do I need to compulsorily install it?
    Does "upgrade" here really mean that the day when the Windows 7 DVD was issued on my name, my existing Windows Vista Home Premium 64 bit license will become Invalid or get expired? Or I can continue using my existing installed Windows Vista on my Laptop and install the received copy of Windows 7 as and when I want or even don't install it on my Laptop, if happy using existing Windows Vista only?
    Regards,
    Aniket Dumbare

    More Information
    I just found instructions to run "BCDEdit" and the results were the following so  it looks like the "Boot Manager" is on S while the "Boot Loader" is on C (Whatever that means)
    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Windows\system32>Bcdedit
    Windows Boot Manager
    identifier {bootmgr}
    device partition=S:
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    default {current}
    resumeobject {2164a006-c421-11de-8836-de5db8963170}
    displayorder {current}
    toolsdisplayorder {memdiag}
    timeout 30
    Windows Boot Loader
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.exe
    description Windows 7
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {2164a008-c421-11de-8836-de5db8963170}
    recoveryenabled Yes
    osdevice partition=C:
    systemroot \Windows
    resumeobject {2164a006-c421-11de-8836-de5db8963170}
    nx OptIn
    C:\Windows\system32>

  • How to Perform In-Place Upgrade of Windows Vista Home Professional amd64

    I'm trying to perform an in-place upgrade of Windows Vista Home Professional amd64 but the setup process fails stating that I need to remove Windows PowerShell prior to the upgrade. 
    I didn't have http://support.microsoft.com/kb/928439 installed so I couldn't uninstall it.
    I checked Windows features and PowerShell and the ISE were listed.
    I tried removing it (via optionalfeatures.exe) but it fails with 'An error has occurred. Not all of the features were successfully changed.'
    I tried installing http://support.microsoft.com/kb/928439 then removing the Windows feature - same error as above.
    I tried installing http://support.microsoft.com/kb/947821 then removing the Windows feature - same error as above.
    I tried uninstalling http://support.microsoft.com/kb/928439 then removing the Windows feature - same error as above.
    I tried performing an in-placce upgrade again and it continues to say that Windows PowerShell needs to be removed.
    I cannot remove PowerShell (or the ISE) via ocsetup.exe as no such option exists according to http://technet.microsoft.com/en-us/library/ff716463.aspx
    I tried removing it with DISM via /online /Remove-Package /Disable-Feature, but "DISM does not support servicing Windows Vista with the /Online option."
    I tried sfc /scannow again - same 'Windows
    Resource Protection' error.
    I tried the in-place upgrade again and it still needs PowerShell to be removed.
    There have been chkdsks and reboots peppered throughout this process.
    I don't know what else to try & I  feel like I'm stuck in a possibly crazy catch 22 situation.
    Note: This is a Windows Vista Home Premium SP2 64-bit machine.
    For those that need more history on how I got here, I'm going to refer you to my 'Windows
    Resource Protection could not perform the requested operation' post in the, incorrectly categorized, Windows 7 forums.  In short:
    Whenever I run Windows updates, all the updates fail.  It doesn't matter if I do one, all or something in between - they all fail.
    I ran sfc /scannow but that fails with 'Windows
    Resource Protection could not perform the requested operation' 
    I tried performing an offline scan as well but that failed with the same 'Windows
    Resource Protection' error.
    Not sure what to do at this point and I don't know what logs would be helpful for you to review at this stage (cbs.log, windowsupdate.log, other?)

    Please try below and check if we can boot normally now.
    1.
    Boot to Recovery console2. Use the backup
    System registry hiv to replace the current hiv
    In the Recovery Console.
    In CMD, go to:
         %systemroot%\System32\Config\
    Run: ren system system.old
    Go to:
         %systemroot%\System32\Config\regback
    Run: copy
         %systemroot%\system32\config\regback\system %systemroot%\system32\config
    Restart your computer.
    After that, please try to test if the server can boot to normal mode now.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Any updates,
    JuliusPIV?
    JuliusPIV
    Northwind Traders
    475 Points               
    10               
    2               
    0                       
    Recent Achievements           
    Forums Replies III                                           
    Forums Answerer II                                           
    Code Answerer II                                                           
    JuliusPIV's threads                               
    View Profile           
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Apologies for the delay.  I will first try your suggestion above followed by system restore if that fails.
    I'll do this over the weekend (if not this evening) and update this post.
    Thanks!

  • ITunes Version 7.0.2.16 and Windows Vista Home Premium

    I am still using iTunes Version 7.0.2.16, and due to my failing computer, I am unable to upgrade to a newer iTunes version.
    I am about to replace my old computer and the new computers all seem to come with Windows Vista Home Premium.
    Do you know if Windows Vista Home Premium supports iTunes Version 7.0.2.16?
    (My plan is to install this old version, copy my music directory across to the new computer, and then upgrade iTunes.)
    Any advice would be appreciated.

    Yes, you can install itunes 7.0.2.16 on Vista Home Premium.
    http://en.wikipedia.org/wiki/ITunesversionhistory

  • Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • Cannot open iTunes 8 with Windows Vista Home Premium

    Hopefully someone here can help me with my problem. I have a new Ipod Touch that needs itunes 8 to work. I have a new HP PC with Windows Vista Home Premium. The problem I'm having is: itunes & quicktime will download successfully onto my computer, but after download will not open. I receive the error message "itunes has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I have tried to open them from desktop & from programs ...will not work. I was using itunes 7 with no problems, but after upgrade to the new version (itunes 8) I started having this problem. Here are a few of the things I have tried so far with help from just about every tech support I could find: uninstall & reinstall itunes (tried this several times..didn't help, but itunes installs successfully each time)...try installing quicktime & itunes separately (didn't help)..disable firewall & virus protection (didn't help)...turn off Data Execution Prevention (DEP) (didn't help)...tried saving software to discs & installing itunes that way (didn't help)...I have updated all of my software including windows vista...I've run virus checks...& pretty much run checks on anything else I could find. I occasionally get the same error message when I try to open Rhapsody, but not every time. I'm thinking of using my backup discs & restoring my computer to factory settings. To do that would be a last resort, but I am getting pretty close to desperate. Does anyone think restoring it would help? If anyone has any ideas for me to try I would really appreciate it. Thanks so much.

    You need to to check to see if your Quicktime works normally. Itunes will not work if QUicktime doesn't.
    If Quicktime doesn't work, describe what happens with any error message in full.
    Go to your control panel and try to start QUicktime preferences. In XP you need to be in classic view to see it, I am not sure about Vista.
    Give the full text of any error message.
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar
    If so uninstall them, they are bad news for Quicktime.
    Report back with your results.
    If Quicktime is OK have you seen the Apple troubleshooting article for launch failure, I guess you have probably done quite a bit of it anyway, but is worth going through it systematically:
    http://support.apple.com/kb/TS1717

  • TS1814 Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)

      I can not connect to the iTunes store can anyone help meMicrosoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Gateway GT5464
    iTunes 10.7.0.21
    QuickTime 7.7.2
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 1.0.6.2 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0027AD8C09AA48C0
    Current user is not an administrator.
    The current local date and time is 2013-11-23 13:55:29.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Intel(R) 82945G Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 12c6ce1e6c8749bf21c4b93f896a44e8
    iPodService 10.7.0.21 is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {646A3344-F31F-4EE7-993F-DE95A709D38D}
    Description: Intel(R) PRO/100 VE Network Connection
    IP Address: 192.168.0.15
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.0.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.0.1
    Lease Obtained: Sat Nov 23 13:31:28 2013
    Lease Expires: Sat Nov 23 14:31:28 2013
    DNS Servers: 209.18.47.61
    209.18.47.62
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2012-09-11 23:36:26.

    Hello tatyana9196,
    We've an article that provides a whole host of information and steps that can help restore your connection to the iTunes Store.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • I get no browser home page; no favorites/bookmarks; no back buttons; no tools, etc. just a generic Firefox bar with preset sites which go nowhere when clicked. I have windows vista home premium. Firefox works fine on my desktop

    Upgraded to latest Firefox version on my laptop w/ Vista Home Premium and get no browser page; no back buttons; no bookmarks/favorites; no address bar...nothing like a typical browser page...all I have is a cumbersome Firefox bar that has preset sites that do nothing when clicked.
    FF worked fine before I "upgraded". Want 3.5 back
    == This happened ==
    Every time Firefox opened
    == about 5 days ago

    I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
    Two points, Steve:
    1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
    2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
    Do you have any idea what to do to solve the problem?
    Regards

  • Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

    Hi Everyone,
    I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
    Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
    I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
    Thanks for your time,
    Lauren

    thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Minimum Requirements for Windows Vista Home Premium - Downloading & Installing

    I need to install Adobe Acrobat  Pro X for windows on my laptop and my operating system is Windows Vista Home Premium but I cannot because the system is telling me I can't due to not meeting minimum requirements. What may I do to upgrade my system so the program can be run and be installed thanks?

    Acrobat X Pro system requirements
    Windows
    1.3GHz or faster processor
    Microsoft Windows XP Home, Professional, or Tablet PC Edition with Service Pack 3 (32 bit) or Service Pack 2 (64 bit); Windows Server 2003 (32 bit and 64 bit; Service Pack 2 required for 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows Vista® Home Basic, Home Premium, Business, Ultimate, or Enterprise with Service Pack 2 (32 bit and 64 bit); Windows 7 Starter, Home Premium, Professional, Ultimate, or Enterprise (32 bit and 64 bit)
    512MB of RAM (1GB recommended)
    1.9GB of available hard-disk space
    1024x576 screen resolution
    DVD-ROM drive
    Microsoft Internet Explorer 7 or 8; Firefox 3.5 or 3.6
    Video hardware acceleration (optional)
      Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

  • I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

    Hi there,
    I'd like to ask you something:
    I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
    Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
    I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
    What is this access authorization, why was something like that invented and what can I do to get it?
    How do I have to proceed in detail?
    What would it cost?
    I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
    Anyways - can you help me please?
    If you can't help me, who can do so?
    It would be nice if you could answer me as soon as possible!
    Thank you guys
    Prying Pedro

    Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
    Termporarily disable any security software on the computer.

  • Error message in windows vista home premium

    I was installing a driver package...from microsoft corporation when this window showed up.
    (some folders cannot be accepted because "skip system and application folders" option enabled}
    I can't find any information on the net or microsoft on How to fix the problem..Any suggestions would be greatly Appreciated it.....
    Thank You!

    thank you ed
    but i think the whole operating system could be compromised(windows vista home premium)
    actually these are drivers for a printer scanner fax copier from brother...but nothing is helping.....
    I ran it as an Administrator..but either i get the message above or this error(difx driver package install error=1610154566.the exe's are 295-INST-A.EXE and 375-USB2KXPVISTA-32-A-US.EXE downloaded from Brother site...I don't know.Maybe i shall re install
    the all operating system....this computer was my brothers...and he could have been compromised with today's viruses..I thank you for taking the time to answer me....

Maybe you are looking for