Equium 200D Vista Home Premium Beta?

I've just purchased an Equium P200D and after a couple of days I received the follwing message under Computer Management- Problem Reports and Solutions-
"_+Upgrade to the latest retail version of Windows Vista"+<<br />
+_The problem was caused by Windows Vista, which is created by Microsoft Corporation. You are running a beta version of Windows Vista, which is no longer supported by Microsoft Corporation_+.
Needless to say I'm a bit confused as the shop did not mention anything about a beta version of Windows Home Premium being installed. I've ran the winver utility and this returns Version 6 (Build 6000). Is this just another Micrososft glitch or do i have something to worry about?
Thanks for your help.

That sounds really weird, Ive never heard something like before. If I were you I would contact an authorized service partner and ask them for this issue, because thats not usual that a preinstalled windows reports that it is some kind of beta version.
Please click [HERE|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] find an ASP near you and contact them.
Greets

Similar Messages

Equium 100-147 upgrade to windows vista home premium

Have been upgraded for 9 months but get compatibility error windows appearing for various toshiba drivers. On opening toshiba assist/protect&fix/preinstalled drivers/tools&utilities it lists everything as my old xp media centre. Can this page be upgraded to vista.
Thanks for help
Robin

----- Original Message -----
From: robin
To: [email protected]
Sent: Saturday, May 31, 2008 2:50 PM
Subject: Equium laptop model PSAABE
Hello
In dec 2006 I purchased an equium laptop which was installed with windows xp. It had a free upgrade to windows vista home premium in june 2007
All the Toshiba driver info on the laptop still refers to windows xp and I wondered if a package can be downloaded to
update all the drivers to vista and change the Toshiba Assist/Protect & Fix/Preinstalled Drivers Depository/Tools & Utilities window to read Vista Home Premium instead of Windows xp.
Thanks for advice
Robin

When I run a diagnostic on my network connection, Itunes says that a secure connection was not found giving the following message. Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) Hewlett-Packard HP Pavilion dv6700 Notebook PC iTu

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv6700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
VoiceOver Kit 1.4 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0025AAF8089EC380
Current user is not an administrator.
The current local date and time is 2011-05-15 21:05:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dc0c6f739bfede483c8983f10e41784f
iPodService 10.2.1.1 is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {588EB1BD-8374-43B1-B687-C47C33764298}
Description:    Intel(R) Wireless WiFi Link 4965AGN
IP Address:    192.168.1.2
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Sun May 15 20:23:07 2011
Lease Expires:    Mon May 16 20:23:07 2011
DNS Servers:    192.168.1.1
Adapter Name:    {1C11AE53-28A5-4AC7-BA9F-CD4109D7856C}
Description:    Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 18:00:00 1969
Lease Expires:    Wed Dec 31 18:00:00 1969
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2011-04-30 21:01:11.

Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir

Install error #1620 PrPro Windows Vista Home Premium

Install error 1620 when attempting to install CS4 "This installation package could not be opened" (for each component of the software package). Windows Vista Home Premium 32 bit, Intel i7 processor. Unable to install any components of PrPro. This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
Also read the article below... I have NOT done this, but it seems to be an easy process
http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

Replacing Motherboard on HP Media Center PC running Windows Vista Home Premium (32-bit)

Running OEM version of Windows Vista Home Premium (32-bit) on an HP Pavilion Media Center m8226x Desktop PC. Replacing motherboard ASUS M2N68-LA Motherboard 6150SE HP Narra2-GL8E with an MCP61PM-HM (Nettle2) motherboard due to failure. Both boards have same chipset and form factor. Can I just replace board without reinstalling windows? Do I need to install new drivers? I don't have an install CD or install key, would Microsoft provide a key if needed? Is there a link I can reference for MB replacement/ install?
Thanks for you assistance!
HC
This question was solved.
View Solution.

The OEM license is tied to the original motherboard version, ie M2N68-LA. You lose the OEM "rights" when you changed the board.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP Compaq d530 SFF not recognizing DIMMs. Windows Vista Home Premium 32bit - BIOS version 02.44

Hello HP community!
I recently received a HP Compaq d530 SFF, from the company, where I had my work experience.
I gladly took their offer and took the PC home, all was going well until I bought myself some new DIMMs, from ebuyer.com.
I new for a fact, the computer needs DDR 333MHz, PC2700 and it had to be in DIMM format, so I went and bought 3x1GB modules. A few days later they arrived and I inserted them into the computer, making sure that two DIMMs were in the blue slots, and the others (I wanted to keep a 256MB module in) in the black slots.
I re-inserted the power cable and tried to boot the PC, it showed me a BIOS message, showing the amount of memory had changed, since the last boot. Once the configuration showed up, it only recognized the 256MB module. I then powered down the computer, to then remove the 256MB module, to see what would happen. I then rebooted the PC and it gave me an error tone (No picture). To which I then (rotatingly) tried each different DIMM, to see if one of them was defect. They all gave me the same error tone. Since then, I have been running Windows Vista Home Premium, with 1GB (4x256MB DIMM).
Does anyone maybe have a suggestion, how to solve this problem?
I have already updated the BIOS version to 02.44 (Latest I could find).
Thanks in advance!
Yours sincerely Simon Cahill
This question was solved.
View Solution.

Beatsleigher,
Not all memory is the same, even when picking PC2700. Did you purchase non-ECC?
Here is a guide on memory config for the D530SSF
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I need my product key to enable to activate windows vista home premium and i can't see iton certific

I need my product key to enable to activate windows vista home premium and i can't see it on Certificate of Authenticity label

Once the label is worn, you cannot get another key for free. You are better to order a recovery disc set from HP, then you dont need a key
You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

[24" Imac, 10.5.3] Can't install Vista Home Premium on Boot Camp

I'm having problems getting Boot Camp to run Vista.
I set up a 32 GB Boot Camp partition with Boot Camp Assistant, and encountered no problems. Stuck in my full version of 32-bit Vista Home Premium (includes SP1), and then continued with the installation. iMac reboots, drive spins, and then all I'm left with is a black screen with a dos cursor blinking in the upper left corner. Doesn't respond to keyboard or mouse input. Will reboot into OS X no problem. Below is a list of the things I've tried to resolve the problem, but non have made any difference.
* Booted from Vista DVD while holding down "c"
* Turned off wireless Mighty Mouse & rebooted
* Plugged MS wired mouse into keyboard & rebooted
* Removed all attached USB and FireWire peripherals & rebooted
* Ran Boot Camp Assistant, deleted partition, created new 32 GB partition, rebooted
* Ran Boot Camp Assistant again, deleted partition, created 60GB partition, rebooted
* Consulted apple.com/support/bootcamp and found nothing helpful
* Consulted Support Discussions and could not find any threads dealing with the problem I'm experiencing
Does anyone know how to solve this pesky problem? Advice and suggestions welcome.
Thanks,
R

I would never go back to Vista, forums are where people ask for help. If you looked at the Leopard OS X forum you would definitely never want to upgrade or use Safari or TimeMachine or worry what the next Security Update or to iTunes harbors.
Upgrading from Vista is supported but backup first, and a clean install is always going to be best. And the same goes for even Tiger to Leopard. Also needs to be the same 32 or 64-bit, going from one to the other is not supported.
Some systems, and keyboards and such, are better supported than others. Windows 7 has support for a wide range of current hardware already.

Itunes won't start on vista home premium

I installed Vista Home Premium and did a fresh install of iTunes (7.1.1.5).
iTunes won't start and gives an error (iTunes won't start):
Eventname: APPCRASH
Name: iTunes.exe
Version: 7.1.1.5
Timestamp:45f8a616
Name of the errormodule: StackHash_03ef
I can't seem to find the solution in the Forums and internet.
I deinstalled and reinstalled iTunes several times but it still gives the same error.
Quicktime also won't start.
Any help is appreciated.

I deinstalled all codecs (including Nero), because windows vista solutions also pointed me in that direction, but no luck yet..
okay. we'd better try swapping out your QuickTime now that the codecs are out of the way.
sometimes with that sort of "error message free" launch failure with QuickTime, Add/Remove doesn't want to get rid of the QuickTime. so we'll try the following technique if that happens:
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Windows Vista Home Premium (64-bit) is slow. Which start-up services should run?

I recently had to use system restore and make a few changes to get my system running again. Ooops. I now have a very slow computer whereas it was working fine before. I haven't recently installed any new software or hardware and suspect that some essential start-up services may have been disabled, stopped or set to manual while some other unused services may have been set to start, automatic or automatic (delayed).
Can someone please direct me to another thread (if available) or list which start-up services should be in which state?
Thank you!
System details:
~ HP IQ818A
~ Windows Vista Home Premium
~ Service Pack 1
~ 4GB RAM
~ 64-bit
~ avast! Anti-virus is active

Sydney,
I don't have an IQ818 at the moment, all I have is an IQ506T - from last fall. I had just done a recovery of it.
Note: 1) I did choose to NOT perform automatic updates, 2) I haven't yet configured Norton, and 3) I haven't turned off TouchSmart from running in the background.
This isn't exactly your system, but it would be somewhat close. Your safest bet would be to recover and start over, but here goes with the services listings. Please note its comma delimited - you can look at it better with something like Excel, Works or Open Office.
Good luck on this.
-dm (an HP employee, but the comments/etc, are mine, not HP's)
Name,Status ,Startup Type,,
Andrea ADI Filters Service,Started,Automatic,,
Application Experience,Started,Automatic,,
Application Information,Started,Manual,,
Application Layer Gateway Service,,Manual,,
Automatic LiveUpdate Scheduler,,Disabled,,
Background Intelligent Transfer Service,Started,Automatic (Delayed Start),,
Base Filtering Engine,Started,Automatic,,
Bluetooth Support Service,Started,Automatic,,
CalendarSynchService,Started,Automatic,,
Certificate Propagation,,Manual,,
CNG Key Isolation,Started,Manual,,
COM Host,,Manual,,
COM+ Event System,Started,Automatic,,
COM+ System Application,,Manual,,
Computer Browser,,Automatic,,
Cryptographic Services,Started,Automatic,,
DCOM Server Process Launcher,Started,Automatic,,
Desktop Window Manager Session Manager,Started,Automatic,,
DFS Replication,,Manual,,
DHCP Client,Started,Automatic,,
Diagnostic Policy Service,Started,Automatic,,
Diagnostic Service Host,,Manual,,
Diagnostic System Host,Started,Manual,,
Distributed Link Tracking Client,Started,Automatic,,
Distributed Transaction Coordinator,,Manual,,
DNS Client,Started,Automatic,,
Extensible Authentication Protocol,Started,Manual,,
Function Discovery Provider Host,Started,Manual,,
Function Discovery Resource Publication,Started,Automatic,,
GameConsoleService,,Manual,,
Group Policy Client,Started,Automatic,,
Health Key and Certificate Management,,Manual,,
HP Health Check Service,Started,Automatic (Delayed Start),,
HP Touch Screen Enhance,Started,Automatic,,
Human Interface Device Access,Started,Automatic,,
IKE and AuthIP IPsec Keying Modules,Started,Automatic,,
Interactive Services Detection,,Manual,,
Internet Connection Sharing (ICS),,Disabled,,
IP Helper,Started,Automatic,,
IPsec Policy Agent,Started,Automatic,,
KtmRm for Distributed Transaction Coordinator,Started,Automatic (Delayed Start),,
Link-Layer Topology Discovery Mapper,,Manual,,
LiveUpdate,,Manual,,
LiveUpdate Notice,Started,Automatic,,
Microsoft .NET Framework NGEN v2.0.50727_X64,,Manual,,
Microsoft .NET Framework NGEN v2.0.50727_X86,,Manual,,
Microsoft iSCSI Initiator Service,,Manual,,
Microsoft Office Diagnostics Service,,Manual
Microsoft Software Shadow Copy Provider,,Manual
Multimedia Class Scheduler,Started,Automatic
Net.Tcp Port Sharing Service,,Disabled
Netlogon,,Manual
Network Access Protection Agent,,Manual
Network Connections,Started,Manual
Network List Service,Started,Automatic
Network Location Awareness,Started,Automatic
Network Store Interface Service,Started,Automatic
NVIDIA Display Driver Service,Started,Automatic
Office Source Engine,,Manual
Parental Controls,,Manual
Peer Name Resolution Protocol,,Manual
Peer Networking Grouping,,Manual
Peer Networking Identity Manager,,Manual
Performance Counter DLL Host,,Manual,,
Performance Logs & Alerts,,Manual,,
Plug and Play,Started,Automatic,,
PnP-X IP Bus Enumerator,,Manual,,
PNRP Machine Name Publication Service,,Manual,,
Portable Device Enumerator Service,Started,Automatic,,
Print Spooler,Started,Automatic,,
Problem Reports and Solutions Control Panel Support,,Manual,,
Program Compatibility Assistant Service,Started,Automatic,,
Protected Storage,,Manual,,
Quality Windows Audio Video Experience,,Manual,,
ReadyBoost,Started,Automatic,,
Remote Access Auto Connection Manager,,Manual,,
Remote Access Connection Manager,Started,Manual,,
Remote Procedure Call (RPC),Started,Automatic,,
Remote Procedure Call (RPC) Locator,,Manual,,
Remote Registry,,Manual
Routing and Remote Access,,Disabled
Secondary Logon,Started,Automatic
Secure Socket Tunneling Protocol Service,Started,Manual
Security Accounts Manager,Started,Automatic
Security Center,Started,Automatic (Delayed Start)
Server,Started,Automatic
Shell Hardware Detection,Started,Automatic
SL UI Notification Service,,Manual
Smart Card,,Manual
Smart Card Removal Policy,,Manual
SNMP Trap,,Manual
Software Licensing,Started,Automatic
SSDP Discovery,Started,Manual
Superfetch,Started,Automatic
Symantec Core LC,,Manual
Symantec Event Manager,Started,Automatic
Symantec Lic NetConnect service,Started,Automatic
Symantec Settings Manager,Started,Automatic
System Event Notification Service,Started,Automatic
Tablet PC Input Service,Started,Automatic
Task Scheduler,Started,Automatic
TCP/IP NetBIOS Helper,Started,Automatic
Telephony,Started,Manual
Terminal Services,Started,Automatic
Terminal Services Configuration,,Manual
Themes,Started,Automatic
Thread Ordering Server,,Manual
TPM Base Services,,Automatic (Delayed Start)
UPnP Device Host,Started,Automatic
User Profile Service,Started,Automatic
Virtual Disk,,Manual
Volume Shadow Copy,,Manual,,
WebClient,Started,Automatic,,
Windows Audio,Started,Automatic,,
Windows Audio Endpoint Builder,Started,Automatic,,
Windows Backup,,Manual,,
Windows CardSpace,,Manual,,
Windows Color System,,Manual,,
Windows Connect Now - Config Registrar,,Manual,,
Windows Defender,Started,Automatic,,
Windows Driver Foundation - User-mode Driver Framework,Started,Automatic,,
Windows Error Reporting Service,Started,Automatic,,
Windows Event Collector,,Manual,,
Windows Event Log,Started,Automatic,,
Windows Firewall,Started,Automatic,,
Windows Image Acquisition (WIA),Started,Automatic,,
Windows Installer,,Manual,,
Windows Management Instrumentation,Started,Automatic,,
Windows Media Center Extender Service,,Disabled,,
Windows Media Center Receiver Service,,Manual,,
Windows Media Center Scheduler Service,,Manual,,
Windows Media Center Service Launcher,,Automatic (Delayed Start),,
Windows Media Player Network Sharing Service,,Manual,,
Windows Modules Installer,,Manual,,
Windows Presentation Foundation Font Cache 3.0.0.0,Started,Manual,,
Windows Remote Management (WS-Management),,Manual,,
Windows Search,Started,Automatic,,
Windows Time,Started,Automatic,,
Windows Update,Started,Automatic (Delayed Start),,
WinHTTP Web Proxy Auto-Discovery Service,Started,Manual,,
Wired AutoConfig,,Manual,,
WLAN AutoConfig,Started,Automatic,,
WMI Performance Adapter,,Manual,,
Workstation,Started,Automatic
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

My 3GB RAM T500 is only coming with Vista Home Premium 32bit, what to do about it?

OK, a recent thread informed me that switchable graphics T500s and presumably T400s can only access 2.5GB of RAM so I have been sold half a gig of unusable RAM with reassurrance from the sales representative I made the sale with that there would be no such problem, and that the concern was only with 4GB RAM and up.
My options:
-Complain to tech support, ask them for a Vista Home Premium 64bit disc free of charge
-Clean install of Windows 7 64bit, and then when installed to download the 64bit drivers from Lenovo's driver page. The original installation will have recovery discs made ofcourse should something go wrong.
The latter looks like the more appealing option, since I would like to purchase Windows 7 on release regardless, would there be any problems with what I plan here? Help much appreciated.
Message Edited by daniel1598 on 06-13-2009 10:24 PM

Hello Daniel1598,
please have a look at the Beta OS Discussion for more information regarding WIN7 and T400/500.
Please ask further questions regarding WIN7 over there.
Edit: typo.
Message Edited by Agotthelf on 14-06-2009 09:24 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Remote Control Vista Home Premium from OSX 10.6.2

I have been trying now and a little while to remotely log in and control my Vista home premium desktop without success. I would like to do it via my home wireless network without having go via the internet. I figured using remote desktop connection for mac would work. But since found out that I have to have the ultimate edition of vista to do this. I would prefer not to have to pay for an upgrade to my vista machine as this is why I just spend nearly $2K on my new mac.
Is there some type of software which can be purchased/downloaded and installed on both machines (if required) to do this??
My reason for wishing to do this, is i am fairly new to the mac world and would like to maintain and run my vista machine until i am completely settled on my Mac. It would be handy just to remote into my vista machine to complete any task or use any particular piece of software without having to try and squeeze two machines on the one desk.
thanks in advance for any assistance you guys can give.

I found a temp solution a program free to use called team viewer. Works fine. But I am going to continue to search, as there is always better out there.

Foxtabs not working. Using firefox 23.0.1. Vista Home Premium

When I open a new tab I get a blank one and my foxtabs are gone, I mean foxtabs is not working.
What can I do? Please, please help.
I'm using firefox 23, and foxtabs 1.4.9. Windows vista home premium.

In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

CS3 'freezed' installation problem on Windows Vista Home Premium.

Hi! I searched everywhere for answer that installation of my PS CS3 is freezed in moment on the screen.
I installed Acrobat Reader, Dreamweaver cs3 only. Both in English language.
I tried to uninstall, then install, using cs3clean, but it`s nothing change in my situation. Even I tried to copy whole content of my cs3 installation disk to hard drive.
Why installation is freezed ? The screen:
http://img237.imageshack.us/img237/7184/cs3problemja8.jpg
Ps. I`ve got Vista Home Premium.
Thanks, best regards!
Ps2. Sorry for my english :)

Kasprzak,
How long did you allow it to sit like this? Only reason that I ask is that I recently did an install on my laptop, and the DVD drive was EIDE and it took probably 20 mins. to get through each disc.
For installation issues, Adobe offers free tech support. Check your documentation for the toll-free phone number in your country, or region.
Hunt

Unable to scan and communicate with scan function C6180 Vista Home Premium 64 bit Printing works

I have an all in one C6180 Photosmart connected by wireless network (infrastructure). Network consists of 2-laptops, 1-Desktop and the printer. Everything works from HP solution Center on the Compaq laptop and the Dell desktop both running Windows XP. My newest laptop is a Dell studio XPS core2 2.4ghz running Windows Vista Home Premium 64 bit. I am unable to scan from the Dell Laptop using HP Solution Center nor can I scan from the printer buttons to the laptop. Solution Center opens I select "scan document" and immediately get an error message "unable to communicate with scanning device. Likewise with the copy function. The laptop does recognize the printer though and I am able to print wirelessly. All functions work when connected via USB so I believe the printer is fine. I have been working with this problem since I bought the printer in 2007. I spent many hours reading hundreds of internet posts, talking by phone with HP and via e-mail support from HP. I became frustrated and gave up for awhile but now I want to see if there are any new solutions that I don't know about. I downloaded full feature software and drivers for the 6180 from HP and performed various levels of uninstall (L1, L2, L3, L4). I also cleaned the registry with ccleaner, windows disk cleanup and manual registry deletions when allowed per HP. I have checked port settings, tried stopping HP functions is Services.Msc. The Digital monitor is currently running, however no scanner communication-computer to 6180 and no scanner communication 6180 to computer. I can print and fax from computer wirelessly. I have ran the HP diagnostic utility separately and it appears everything is fine, connection IPaddress etc. During install when prompted to run test it says the printer is connected to the network. I have tried to add a device to the network after install and get the message no wireless devices found. The scanner does not appear under Cameras and Scanners in control panel. Nor will it find the scanner when I try to add device. Firewalls and antivirus have been turned off. Still can't make it work. Suggestions please.

Sorry about your pain. L3 uninstall is what I recommend. Re-install from hp.com and this time, with the printer properly attached it should flow OK.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Equium 200D Vista Home Premium Beta?

Similar Messages

Maybe you are looking for