Equium 350D and Windows 7 - Webcam driver load failure

Have successfully installed Windows 7 on an Equium L 350D.
Have Successfully installed Tosh Camera Assist software (Chicony) and hardware profile indicates the driver is OK, and I can see the toolbar for the camera.
But on every boot and when trying to activate the camera I get 'Webcam Driver Open failed - Please restart camera or computer'. It worked perfectly OK with Vista.
Anyone any ideas?

If anyone wants to know the right answer please check laroumecs last posting at http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=179711

Similar Messages

N73 and windows media player driver

hi everyone,
im having a problem installing the windows media player driver off the disc for the n73 it installs everything else but fails to install that anyone know where i can down load a copy.?
ive got:
pc suite 6.83
windows xp service pack 2
windows media player 11
cheers

I have the latest version of Windows Media Player 11. I have the same problem and will try to explain the steps in the best way I can.
I connect the N73 to the laptop using a cable
I select media player and press ok twice.
Found New Hardware box appears and tells me "Windows needs to install driver software for your N73.
I select the recommended option "Locate and install driver software"
After a few moments I am then asked to insert the CD that came with the N73. It doesn't work as it is an old CD with old drivers from last year.
I select I don't have CD option and I get "problems and reports caused by mobile phone" message etc.
I have tried installing the latest CA-52 driver but I cannot install since I have the latest PC Suite. Windows Media Player is also set up to automatically download licenses required to play and synchronised tracks.

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Where can i find windows 7 webcam driver for compaq cq61-100sl?

I'm searching for a webcam driver for compaq cq61-100sl but i can't find it, please help me!

Hi:
Normally, all you need is to install the Cyberlink YouCam software.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78419-1&cc=us&dlc=en&lc=en&...=
Paul

Windows 7 x64 driver installiation failure for 621...

Hi,
I've just installed PC Suite (freshly downloaded) on my Win7 x64 system and it will not install the drivers for my Nokia Navigator 6210.
It just says driver installiation failure when i try to install it. I've tried restarting my PC and phone. I've been into device manager andunder wireless communication devices it has nokia 6210 navigator USB phone parent with an exclamation mark next to it and the device status says "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
ive tried uninstalling the drivers from the device manager window and installing from windows update, which does install drivers, instructs my to restart my PC and after i do it shows the same error in Device manager again.
PC Suite says i have a 32 bit system but the only version of PC Suite i found was a x86 and x64 bit combined package.
Here is some info about my system;
What version of Windows is being used? 7 x64
What Service Pack is installed? RC
What version of PC Suite is installed? 7.1.40.1
What is the connection method, cable, bluetooth or IR? Cable
PC Connectivity Solution:
Version 9.44.0.3
Nokia Connectivity Cable Driver:
Version 7.1.22.0
Operating system:
32-bit Edition
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 8.0
- Mozilla Firefox 3.5 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385)

Hi austempest
I just tried a quick check at the Windows 7 Compatibility Center (http://bit.ly/4uZDu2 ) for “PC Suite,” and the search came back that the Sony Ericksson PC Suite isn’t compatible. There was no tangible return for “Nokia PC Suite,” but I’m beginning to think that perhaps you could try either installing the entire Suite in compatibility mode, or at least try installing the driver in compatibility mode.
Here are a couple of procedures:
Installing Software in Compatibility Mode-- http://bit.ly/aSO7U
Installing hardware in Compatibility Mode-- http://bit.ly/B0tCG
Hope this helps
Geoff V
Windows 7 Client Team

Windows 7 Webcam driver?

Hey, I have an X200 tablet that I just installed Windows 7 on. I've installed patches/drivers for almost everything, but I can't get the webcam to work. Any help?

Thanks Wendel.
I downloaded the 65dt11ww driver from here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68014 which is the Vista 32 bit driver for the webcam
I double clicked it and it installed itself into C:/drivers/Vista32/camera.
I then went to Start, Accessories, Run and clicked on Browse and went to the above camera file where I clicked on Setup (the application file not the other ones). Run setup and bingo! one working camera.
Thanks for the advice from the forum members - much appreciated.
A big thumbs down to Lenovo for not supporting a 2 year old laptop.

Resored envy dv6 notebook and windows 8 won't load i dont have the discs

I bought an HP envy dv6 notebook used with Windows 8. The person I bought it from did not remove her password or fingerprint scan, I was unable to reach them (i bought it out of state). I did some research and found the best thing to do was a complete system restore - which i followed the directions and did. I do not have the original driver disc.
I am now in a contant loop where it comes up with the first password which I successfully changed but would like to remove. When it starts to load the administrator it goes into a constant loop of Windows did not load properly. Restart the computer. And I fo around and around, I have tried everything I have found on here and many other sires and still I am unable to get it to work.
I have a Windows 7 disc but I am afraid to even try it since I was told that the reset to factory settings would work and it doesn't I do not want to do anymore damage.
I did notice that the born on date say 00/00/0000 I am not sure if that is part of the problem or not
This question was solved.
View Solution.

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please contact official HP Customer Support in your country / region, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for the computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Problems with Bootcamp and windows 7 graphic driver

So I installed windows 7 ultimate on my 24" Imac 2.93GHZ with a Nvida GT 120.
I installed the boot camp software on windows, which installed the graphics driver and everything.
Anyway so I downloaded Dungeons and Dragons online cause I wanted to see how the performance is.
When I run it, it says no sutible graphics drivers were found, check to see if your system meets the requirements.
Which it does, the game is quite old and could run on a old Geforce 6600.
So I went to Nvidia to look for the driver, I thought I found the right one, downloaded it, but it didn't work saying that I didn't have the card. Am I supossed to download the mobile version of this driver?
Thanks!

Fixed it, just needed to upgrade my bootcamp.

Laserjet 6P and Windows 8.1 Driver

The Laserjet 6P is not in the Printer list in Windows 8.1 and I don't see it as a supported OS at HP.com. Does anyone know a driver in Windows 8.1 that I can use for my old, but sturdy Laserjet 6P?

My Windows 8.1 Pro 64-bit system has built-in drivers for this printer model:
I don't know whether the drivers are present on a fresh Windows install; they may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.

Mac and windows sharing external drive on mac.

I am trying to access my external drive on my mac from my pc. Sharing is enabled but the drive doesn't show up. what are the options to do this? I have tried to find it by name command line in windows but no go. I also tried to mount it to the pc but no good the drive mounts but will not asign a drive letter and is not a readable format for XPpro.... Doh!
Thanks
Mark

If you want the drive to be readable on both peecee and Mac, the drive should be formatted as a FAT32 volume which OSX can read and write to or as a NTFS volume which the Mac can read but not write to.
That is not correct.
Windoze does not recognize any Mac formats.
That's true, but Windows doesn't need to read Mac formats to access a network disk. The disk formatting is handled by the computer directly connected to the disk (which is the Mac). The network file access does not contain any disk formatting information and therefore it doesn't matter what format is used on the disk.
You can use SharePoints to make that drive visible to non-Admin users.

TS1538 iPhone 5 and Windows 7 device driver not being recognized

I've de-installed in the correct order and re-installed all Apple software for Windows 7 x64 box.
I've manually added paths to the device driver.
I've re-scanned device manager.
I've gone through 4 different kbb articles.
Used 4 different USB ports on the Front Panel of this box.
I've restarted, stopped, started the Apple Mobile Device Service.
I've rebooted 15x, my Alienware R3 laptop works just fine.
I can see the iPhone 5 in iTunes, and this problem has been occurring with my iPhone 4.
Devices and Printers lists the iPhone and Apple Mobile Device USB driver without any conflicts on the exterior.
If you go into properties boom Unvailable. I've turned off every shield in Avast. I only have 1 A/V.
What else can I do?
The rig is a custom built i7 3770s, MSI motherboard, 16gb DDR 3 RAM, USB 3 support etc. I've tried everything... why won't my iPhone get recognized? I seriously do not want to wipe the box for a device driver. Does RDP software create conflicts with USB devices? I have a couple installed.

Hi Allan,
I am using 11.0.4.4 version of iTunes.
Nilay

Help!!!! have a 1st gen shuffle and windows xp can't load itunes music to my ipod get error50

Help downloaded i tunes 10 awile ago and now can not get music to load to my ipod from my itunes library...used utility reset to restore to factory settings and still get error 50. Updated to 10.4.1 last night and still getting error 50 I have windows xp and need help on what to do next!!!!!!

If you took the backup of your music that you made from the old computer and compiled the iTunes folder to the new computer your iPod would think it was syncing to the same iTunes Library (it can only sync to one library on auto sync) and would add the music you purchased.
Sounds like you didn't have a backup file. You need to put all the music you had on the old computer on the new computer and then sync it. If it was music you purchased from iTunes download it again, there is no charge. If it was music you ripped from CDs then rip them again. If you don't want to download or rip them again then buy TouchCopy and move the music from your iPod to your new PC iTunes library then sync again.
By the way this is a user-to-user technical support site, I don't really care whether you buy music from iTunes or not.

Pavilion DV7 4085-sf and Windows 8 Graphics Driver

Hi guys ,
can anyone help me with a graphic driver for my laptop Pavilion DV7 4085-sf ?
I have this video card Ati Mobility Radeon 5470 and i not find drivers for Windows 8 to that card.
Thank you verry much!!
This question was solved.
View Solution.

flock16 wrote:
Hi guys ,
can anyone help me with a graphic driver for my laptop Pavilion DV7 4085-sf ?
I have this video card Ati Mobility Radeon 5470 and i not find drivers for Windows 8 to that card.
Thank you verry much!!
You might refer to the steps in this post to help you install graphics drivers for your notebook. Please let us know if this works for you.

Dv6707us Windows 7 webcam driver

I have an HP dv6707us entertainment laptop and i cought a copy of windows 7 ultimate x64 and installed it. Now i really need for the built in webcam to work but it doesnt. Ive tried finding drivers on the HP support and drivers page for my model but under "windows 7" all there is, is HP wireless manager. And under Vista x64 i cant really find the webcam drivers. However they are lsited under windows xp but the installation doesnt work.
EDIT: Also when i go into the windows device manager and i look under "sound, video, and game controllers" there isnt any webcam listed

webcam should be in IMAGING DEVICE in your device manager... please check again and let here know that is there any USB VIDEO DEVICE avaible or not..

T410s GPS and Windows 7 sensor driver framework

Hello,
I'm just wondering if there's a way to make my T410s GPS to show up in Windows 7 Locations and Sensors? Currently it seems that the GPS enable application is pretty much the only app capable of taking advantage of GPS chip and I would like to expand the use of it.

If the gps is NMEA, my generic Windows 7 driver will work.
http://www.turboirc.com/gps7

Equium 350D and Windows 7 - Webcam driver load failure

Similar Messages

Maybe you are looking for