Equium A100-02L screen colours fade to green/yellow.

Equium A100-02L screen colours all green/yellow but it all displays correctly in Safe Mode.
Reliability & Performance Monitor says:
A device has a configuration problem that prevents it from working properly.
Details: The device, Microsoft ISATAP Adapter, is reporting "tv_ConfigMgrErr31". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ROOT\*ISATAP\0001.
Is this the problem? How can I fix it?

Hi mate
Please check this Toshiba US forum thread:
http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Microsoft-ISATAP-Adapter-is-reporting-quot-tv-ConfigMgrErr31/td-p/35676
seems the guy received the same error message and could this MS knowledge base article was very helpful:
http://support.microsoft.com/kb/932520/en-us

Similar Messages

Equium A100-02L - overheating/shutting down

Hi folks
My daughters Equium A100 02L keeps overheating/ shutting down. The fan underneath is choked with dust etc. I dislodged some of it by blowing and poking with a fine wire. How can I remove the fan to give it a good clean? I know I could use compressed air and try blasting it from the exterior grilles, but this may not suffice?
any help diagrams/ video link help would be great.
cheers

> How can I remove the fan to give it a good clean?
It is not so easy because the whole notebook must be disassembled. Unfortunately Maintenance manuals is not public document and on the net you can maybe find some descriptions and several pictures but I don't think it will help you much.
The first problem is how to remove speaker cover placed on the top of the keyboard. If you do this on the wrong way you will damage small plastic holders and ...... you know what I mean.
If the notebook is still good and your daughter is satisfied with it contact service and ask how much will cost professional cleaning.
They will disassemble whole notebook and check how it looks inside. I saw very often that CPU grease on old notebooks is also not the best and completely desiccated. That means the CPU temperature can grow up and reach critical level. Talk with them. Maybe they can also replace CPU grease.
Ok it costs a money but on this way you will be sure everything will be done well and on professional way.

Equium A100 black screen on startup

Toshiba Equium A100 laptop
Completely black screen on startup so please don't say go into safe mode etc, because I can't.
I can't see a thing.
Like once in every 100 goes it will come on and I can F12 to boot from the format disk but it eventually freezes before completion.
Video showing what's happening - BTW the buttons you see me pressing are Fn+F5 I've heard that that sometimes works, but yeah, it didn't.
http://www.youtube.com/watch?v=Sb7KcROckVI
Thanks.

Hi
Look not good dude I think its an serious hardware issue
I checked the movie and cannot hear a beep when the notebook passes the POST (power on self-test). So for me it looks like something wrong with the hardware
But did you try to connect an external monitor in order to check if something would be visible on second screen? Check this
You could also try this:
Disconnect AC adaptor, remove the battery, wait some time (3-5 hours), then connect both parts and try to power up the notebook. If this fails, well in such case have no many other ideas. Ohhh wait maybe you could check the RAM modules. Try to power up the notebook using one module in each slot

Screen colours blury and green, cant select music

My classic wont let me navigate it to select songs etc I have lost all control. The screen is blurry and changed colour. It is charged. It allows me to turn it on and off and volume control. It plays music and shows me screens randomly. It is stuck, I press buttons on wheel, turn it off and on and it will have moved to a different folder - but I have no visual control... Any idea whats wrong?? Anyone?? Very depressing... need my ipod for gigs

Has your iPod got wet?
Phil

Equium A100: blank screen

HELP! My notebook has a totally blank screen and I cannot get a display. I suspect this has something to do with my children! I have read the user manual, but am completely stuck. Can anyone advise? The caps lock is illuminated and I can't get rid of that either.
Thanks

Hi
I assume you children have changed something. Maybe its not a hardware malfunction.
What you can do is to connect the external display to the notebook.
Check if you can see something on the external monitor. You can also try to change the display device with the key combination FN+F5.

Equium A100-02L with an audio problem

Hi There
It seems to be a relatively popular topic but I still have not been able to fix my laptop. It came with Vista installed and as it was relatively sluggish, I decided to install XP SP3 on the machine. I have all the drivers from Toshiba as well as all windows updates from MS update. Everything seems to be working wonderfully except the sound. Windows has never picked up that I have onboard sound and so has never attempted to install drivers. I have installed the ones from Toshiba, and then the ones from realtek, all to no avail.
In my device manager it says, under 'other devices', that there is a PCI device with no Drivers (Yellow question mark, with a yellow exclamation mark). I feel that this may be the root of my problems but I have been unable to do ANYTHING about it.
If anyone has any ideas or needs any further info, PLEASE PLEASE PLEASE ask :)
Thanks for your time.

Hi
The problem is that you need to install firstly the XP hotfixes KB835221 and KB888111 before you will try to perform the sound driver installation.
So install firstly these patches (google sipmply) and after new reboot install the sound driver.
Possibly you will have to remove the sound card from the device manager firstly and then after second reboot you could be able to install the sound driver.
Try simply and check it out.
Best regards

After stand by screen is frozen - Equium A100

I have just bought an Equium A100-306 and this is my first laptop (have always had desktops) so not sure if it is me that is doing something wrong..... After being left unused for a while, my laptop goes into standby mode. If the laptop is open the power on button flashes orange, I press this to come back out of standby but when it wakes up the screen is frozen.... there is also a note that comes up at the bottom saying network cables are not connected (even though I haven't touched anything).
The only way I have found to get out of this is by pressing and holding the power button and then starting the computer up again, it works perfectly again when its back on?
Would be grateful of any help?
Rach

Hi Rachel
Such issues are always strange and I think we can only suggest what could be wrong or what could help.
Hmm you said there is a messages saying the network cables are not connected.
I think you should firstly disable the power saving in the device manger -> LAN properties and disable the Link Down power saving in the advanced tab.
I have also checked the driver page and it seems there is a new BIOS released. You could try to update the BIOS to the newest version and check if you use the newest LAN driver version.
Good luck

Black screen on Equium A100-306 after watching movie on external projector

Hi!
I've got Equium A100-306 Laptop and it was working fine. Yesterday I plugged in a projector and watched the movie.
Once i finished the movie i switch it off and disconnected the projector.
After few hours later i tried to switch my laptop and found that the inital screen loads up after that there's nothing in the screen.
I could go in the BIOS but couldn't go the Safe mode. I still remember i did use Fn and F5 key but nothing comes up so any help could be much appreciated.
As the initial screen loads up i don't think there's a problem on screen neither on graphic card as the toshiba logo shows up at the starting.
Can anyone help to figure out if tht's a hard disk problem may be.

Hmm for me it looks like the display was set ONLY to an external display device (projector, external monitor, etc) and therefore you are not able to see anything on the notebooks internal screen.
I think you should connect the projector or an second external monitor to this notebook and should try to set the display back to the default settings (notebook screen only)
The FN+F5 combination should help you.
As far as I know the notebook changes the screen output in this order:
*Internal screen* *(CRT) external screen + internal screen* *(CRT) external screen only* *TV (s-video out) + internal screen* *TV only (s-video out)*
So possibly you have chosen the last device (s-video out only)

Tutorial for Colour Correction and Green screen

Anyone know of any good tips to remove the green look from white hair? or any tutorials I can read for colour correction with green screen?
I filmed a getlemen who has white hair on a green screen. The colour of his hair picked up a slight tint of green and I need to remove it. Can anyone lend some sound advice.
Thanks

Your best chance is to study the manual carefully and to cycle through the chromakeying filters you have at your disposal. If you were using DV, you will probably need to purchase a far more capable keying application, one that compensates for DV's terrible chroma resolution.
The books on the shelves at Borders and Barnes/Noble for After Effects and FCP will help you get the most from your existing key filters. You will ned up stacking several copies of your footage with different key settings. Without preproduction, the proper lighting, a good camera and adequate tape format, managingr a good chromakey in post is very difficult.
google chromakey, too.
bogiesan

Equium A100-147 doesn't boot up - no display on screen

Hi,
I have a Toshiba Equium A100-147. When I switch it on, I can see the LED's light up but there is no display on the screen.
I read on a previous thread on a similar model that this was fixed by resetting the computer.
I understand there is a possibilty that this is an issue with the motherboard, however I remain hopeful that a manual reset might work.
Can someone please tell me how this can be done??

You could try this short and simple procedure;
- remove the battery from the notebook
- disconnect all external 3rd party devices and the AC adaptor
- leave the notebook for about 20-30min
- then connect battery and AC adaptor again
If the notebook will not power up after this procedure then your have a serious hardware issue and only the ASP could help you.
I dont want to make any statement about the possible faults because its always difficult to say whats wrong exactly but it looks a little bit like a mobo issue.
Bye

Equium A100 - Unable to boot from bootable disc

Equium A100-549
My partners son has a 2 year old Toshiba laptop that has become slow over time. I had made a backup of the system with office etc installed using Acronis. Anyway, decided to clear it off by running Acronis and the image saved. The program runs as normal and it drops down to a dos like screen ready to restore. It then sits there with the curser flashing as normal and then it locks up, and doesnt allow you to browse to the image.
I though that this may be corrupted, so reinstalled Acronis. Made an Acronis boot disk to run the image and it ignores the disk and boots straight to the normal hard disk (IDE 0) Still no joy. Then tried the laptops restore disk. In the BIOS I specified CD device as first, and also the restore disk says place in drive and turn off.
Then as it boots hit F12 which brings up a menu allowing you to boot from CD drive. I have done this, but it doesnt appear to look at the CD and just loads windows from the HDD. I removed the CD from system devices and rebooted. It found it and added the new device to itself and requested a reboot. Still no joy!
Scanned with Norton but still no good. Removed Norton. The result is the same. Able to read from the CD and also write to it as well. Ran Toshibas diagnostics on the device and all appears ok with it.
Tried to make a boot disk on flash stick, but this is ignored also, even though specified boot using other devices.
Basically it looks like I cant get it to look at the CD before loading off the HDD.
Would flashing the BIOS cure it? - Registry error causes this?
Is there anywhere that I can speak to someone from Toshiba about this?
Any info / help much appreciated

Worked first time. I was in the middle of running a downloded version of system mechanic to see if it would find anything. Anyway, I placed the restore disk in it and pressed C on reeboot and it worked - foolishly I stopped it and tried again. It worked again. Had searched the entire net and a few forums before coming here. One post and its fixed!!!!
A life saver, especially at christmas as I didnt want to have to buy another laptop.
Once again thanks
Nick

Green/Yellow screen issue? (Not blobs, whole screen discolouration)

Hey there,
I know there has been many websites posting about the yellow blobs that have been appearing on the new iPhone 4's retina display as a result of manufacturing issue.
However, my entire screen seems to have a much 'cooler' tint that my previous iPhone 3GS or MacBook Pro screen. This is my second iPhone 4 (the first didn't vibrate) and the screen appears the same - unfortunately, I'm a tad OCD and would just like to confirm this is how the screen should appear. When I visited the Apple Store, I didn't have time to compare to other handsets on display.
It's not dreadfully green/yellow, but white appears much cooler than I'd imagined. The 'blue' top bar on apps such as Safari, Messaging and Email appears more green than blue.

It doesn't appear to be in blobs as the sites describe though.
On a pure white screen, the entire screen shows no trace of defects - it is all the same colour with no localised discolouration, it appears white. It just appears as if the screen itself is 'cooler' (I can't find any other word to describe it) - it just appears to add a greenish hue to the screen, specifically items that appear grey, blue or green.
I'm just curious if this how the Retina Display is supposed to be? I know with each successive iPhone, the screen became warmer and more yellow, I was wondering if Apple have decided to go cooler in this approach.

Connecting Equium A100 to a TV

I have an Equium A100-147 and a TV (Type is KV28FX).
I wanted to connect the A100 to the lap tpo to view some pictures.
I have tried connecting with a S to S lead, and a S to scart lead, neither of which work. Can anyone suggest an answer?

ensure that both ends are connected (one from your laptop to your tv). once thats done, right click on your
desktop and from the drop-down menu go to Graphic Options, then to Output To from which select Intel Dual Display Clone. Finally click on one of the options from that menu and you should get your output on both screens.
good luck!!

Pale screen colours after updating to Adobe Flashplayer 11.8.800

I have just updated to Adobe Flashpayer 11.8.800 using Window 7 (64 bit) my screen colours all changed and all went pale... do I now uninstall or is there a fix ? Anyone else have the same problem ?
Now fixed after re-booting - the colours came back again...

It sounds like we've got a number of *different* problems on this thread. I'll try and respond to a few of them.
@filter 2.5 and everyone else running into a green screen issue. Please try the solution outlined in the post below to see if it will allow you to use hardware acceleration. The other alternative is to try a different ATI driver.
http://forums.adobe.com/message/4865912#4865912#4865912#4865912
@pipseer - Somehow Internet Explorer's activex filtering was enabled on your system. This troubleshooting is also described in this FAQ: ActiveX Filtering in Internet Explorer
@Sahloknir - For the sound issue, we're going to want your system specs. Please start a new thread with:
Operating   system
Browser
Flash   Player version
Dxdiag Report Instructions
Sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
@mem2013 - The Flash Player update service will not impact Flash Player's performance. This is a separate service that runs for just an instant on your system once an hour (if you have automatic updates enabled.) Changing it from manual to automatic shouldn't make any difference.

ATV2 Screen Colours Are Incorrect (and Unchanging)

I am trying to use the new Apple TV 2 with my Panasonic TX-32LXD700A television but the colours are all wrong; blues are green, yellows are pink, etc. The odd colouring also affects the on-screen menus. Note that this is different to the "HDMI handshake every 20 to 30 minutes" problem, in my case the colours are always incorrect and unchanging. The device plugs in via HDMI. I have tried swapping the to the second HDMI port. I've tried a second cable. I've tried changing the order in which the devices are switched on from cold boots. Nothing works. The picture and sound is otherwise fine. Switching to another input forces the normal colouring to return to all inputs, but as soon as the Apple TV 2 has finished booting the colours switch to the incorrect space. The firmware of the TV is given as version 3090-10000. There are no options in either the user menus or the service menus to change the colour-space. I plugged the Apple TV into a computer monitor using a HDMI-DVI cable and the colours appeared fine. Please help!

I called Apple and whilst the guy on the phone was very understanding he was unable to help. I was hoping there was some secret combination of the remote buttons that would see the colours spring into life, but no.
I called Panasonic and asked for access to the latest version of the firmware for the television. They are sending it to me on an SD card via courier at no charge (one would think that it must be cheaper to host it on-line). The new firmware addresses a "sound distortion" issue (which I can recall happening occasionally sometime ago) but here's hoping it fixes my ATV2 colours too.

Equium A100-02L screen colours fade to green/yellow.

Similar Messages

Maybe you are looking for