Equium A100 - s video link has not functioned
Dear Forum Members
I have an Equium A100 running Vista (home edition).
In the past I have happily had my PC linked to a TV using an S video lead to view TV programmes, dvds etc.
However recently my computer had to be reset to the original factory settings and since that time the s video link has not functioned - the PC wallpaper shows on the TV but nothing else.
I have loaded what I hope are the appropriate latest drivers (perhaps source of problem) and the display settings appear to be correct.
Any help with this problem would be greatly appreciated.
Ron
>... the PC wallpaper shows on the TV but nothing else.
This happen when option Extend the desktop onto this monitor is enabled.
Please enter display settings/properties and be sure this option is disabled.
Similar Messages
-
ITunes cannot recognize touch/audio/video playback will not function
All right, I asked apple support about this and didn't even get the dignity of a response, so here goes. My computer crashed a while ago, and when we rebooted it, this started: Whenever I plug my iPod into the computer, I get a message saying "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again." So I followed those instructions, and I still get the same result.
A reason I think this might be happening is because I installed the iPod Touch update (not the one you have to pay for, but the one that puts that grey strip across the bottom of the home page), then the computer crashed. So maybe the update is installed on the iPod but not on iTunes? I'm not even sure how to get the update again to be honest.
There are a number of things that we have not reinstalled yet on the computer, like our audio/video playback. Whenever iTunes is started I get this: "iTunes has detected a problem with your audio configuration. Audio/video playback may not function properly." And it doesn't--we have no sound on the computer right now. That is something I would like to change ASAP, I'm just dying to hear some new music.
And when I say we have no sound, I mean zero sound capabilites: iTunes, Windows Media Player, even the internet, there is nothing at all.
I really don't know much about computers, and I just didn't know where else to turn. Thanks to anyone who thinks they can help.Hey dbsabres06,
Use the steps in this article: http://docs.info.apple.com/article.html?artnum=93698 to uninstall and reinstall the Apple software on the computer. The Apple Mobile Device support is the driver that allows the iPhone and iPod touch to be recognized.
For the audio configuration issue, try the tips in this article:
http://docs.info.apple.com/article.html?artnum=304424
Not hearing audio from system events, or applications like windows media player might be a driver issue.
Try running your windows updates or checking your computer manufactures website for updates.
Jason -
Equium A100: DVD/CD drive has stopped working code 22
Toshiba Equium A100 on Vista operating.
DVD/CD drive has stopped working and is showing as disabled. Have tried to re-enable but error code 22 returned. Can anyone help?Hi
The Microsoft page provides these details about error code 22
*This device is disabled. (Code 22)*
_Recommended resolution_
+Enable the device by using Device Manager.+
+In Device Manager, click Action, and then click Enable Device. This starts the Enable Device wizard. Follow the instructions.+
It looks like you have already tired this. Well, in your case I would recommend removing the CD/DVD drive from the device list in the device manager. Just simply mark the device an press delete.
Then restart the notebook and check what happens. -
Insert link is not functioning properly. Please help.
Hello :)
My insert link option used to work just fine.
Recently, it is not allowing me to do this and I cannot understand why.
All I get is 'NO NAMED ANCHORS OR HEADINGS IN THIS PAGE'. This is VERY frustrating!
Please help me as I need to send many links for work,and I don't know how else to do it.
Thank you.Is the cursor in the message text area? Have you already entered any message text when you try to insert your link?
-
Even though the import function is visible on the list in my file menue it is in lighter print and not accessible / functional therefore I have no way of importing bookmarks.
I've looked through various help searches and have not been able to find a solution to the problem.Make sure that you not run Firefox in permanent [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode" -
Web Photo Gallery - Contact info not functional?
When I build a web gallery, using the Flash Gallery (default) in the 'Template Browser', no matter what info I put in the 'Contact info' and 'Web or Mail link' boxes (under Site Info), it does not work.
Example, under 'Contact info' I put the word 'Contact'....in the 'Web or Mail Link' I put 'mailto: [email protected] (I have not put my actual email here for purposes of this forum, and yes my email address is valid and will both send and receive in Outlook).
So anyways, when I upload the new web gallery using Dreamweaver CS3, or if I just simply preview it using the 'Preview in Browser' button, well the word 'Contact' appears in the upper right corner of the web page (photo gallery - as it should since that is what I put as word in the 'Contact info' box, but yet when I click on the word 'Contact' it it does nothing. Actually when I click on the word 'Contact' the first time, there is a line that appears below (as if to identify a link). But as I say it does nothing, opens no email window, nada! Except for when I click on the word 'Contact' subsequently, there is no more line underneath as if the link had become inactive???
I tried using another email address of mine, which is also shorter, but it does not work either....I also tried putting my main homepage address into the ''Web or Mail link' box and still nothing happens...it's as if the link is not functional...?
Has anybody else experienced this? Am I doing something wrong? Is it maybe just a Flash Gallery bug? (Because I have not tried using other type galleries i.e Blue Sky)I have the exact same problem, step by step in Lightroom 2.4. I'm using Vista Ultimate SP2 and Internet Explorer 8.
Have anyone found a solution to this problem or is it just the two of us? -
After I downloaded the video-Podcasts and I want to start them, nothing wil happen.
The audio-podcats are functioning okay.
I have got the latest version of Itunes en Quicktime player installed.
Who can help me?When the Sync finishes, do you see a message saying something like "video xxxx has not been transferred to your iPod because it cannot be played on this iPod"? If so, you could try highlighting the video in question and clicking on *Advanced/Create iPod or iPhone version* (it will be different wording if you are using iTunes 7 or earlier!).
However, unless iTunes 8 has "improved" this feature, it takes along time to convert and it does not always work. I gave up with the conversions.
The "problem" is probably caused by the Podcast producer changing the format of their Podcasts, possibly for a good reason. Check first in iTunes or even on the Podcast producer's web site, do they have a different Podcast (of the same programme) especially for the iPod and you are downloading the wrong one?
(Out of interest, what is the vid Podcast you are referring to, did you subscribe to it in iTunes?)
After that, you could try contacting the Podcast's producers to let them know what has happened. Bear in mind though, that Podcasts are produced independently of Apple/iTunes and are intended for all makes of MP3, not just iPods. So they may not care that only iPod users cannot watch it.
Good luck. -
Video podcast will not upload onto iPod. Dimension changed!problem!
I usually subscribe to a specific vid podcast but lately i have noticed that my ipod will not sync the new vid podcasts. it's very frustrating! i have had a closer look and realised that the vids that don't sync into my iPod have a larger dimension 852x480 compared to the old 480x270. This is an MPEG-4 file. What is the problem? What should i do? Can i adjust the dimension? if yes how? I'm not sure if this is the problem but if there are any suggestions i'd appreciate them.
When the Sync finishes, do you see a message saying something like "video xxxx has not been transferred to your iPod because it cannot be played on this iPod"? If so, you could try highlighting the video in question and clicking on *Advanced/Create iPod or iPhone version* (it will be different wording if you are using iTunes 7 or earlier!).
However, unless iTunes 8 has "improved" this feature, it takes along time to convert and it does not always work. I gave up with the conversions.
The "problem" is probably caused by the Podcast producer changing the format of their Podcasts, possibly for a good reason. Check first in iTunes or even on the Podcast producer's web site, do they have a different Podcast (of the same programme) especially for the iPod and you are downloading the wrong one?
(Out of interest, what is the vid Podcast you are referring to, did you subscribe to it in iTunes?)
After that, you could try contacting the Podcast's producers to let them know what has happened. Bear in mind though, that Podcasts are produced independently of Apple/iTunes and are intended for all makes of MP3, not just iPods. So they may not care that only iPod users cannot watch it.
Good luck. -
Re: DVD drive not working on Equium A100
I have a problem with my drive it has power but wont read or write, no it is not error code 39
This happened when SP1 on Vista was installed it upset my chipset drivers.
So I have uninstalled SP1 and tried to update BIOS but I get an error code on winphlash new BIOS part number doesn't match system BIOS part number.
error code 120
Cant find this error code anywhere?
Anyone help?>but wont read or write
Sorry but this statement is too general for me. You didnt write which medias you have tested. Original DVD movies or music CDs. Maybe some self created stuff.
Please tell us more about this issue. As Silas already wrote it cannot be because of SP1.
Have you tried to remove SP1 and check functionality?
Friend of mine has Vista preinstalled Satellite A100-504 with SP1 and everything works well.
Which Equium A100 do you have exactly?
On download page there are listed three of them.
Have you used right BIOS version? Which one you want to use?
Please don't be mad on me but if you want to have some help please offer more information.
If I inform car service about my problem I cannot say: I have BMW and motor don't want to start.
They also want to know which model, which engine and so on. You know what I mean. -
Equium-A100-147 - broken sound and video
Hi everyone,
I have the Equium A100-147, Its been working fine for last couple of year.
But in the last few weeks has get problem in sound and video (broken sound and video).
The sound is breaking and sometimes uable to listen + video breaking and so much delay due to its get so slow with so much sound distorsion etc..
This remains after new installation (format HDD) of Wind XP unable to fix even installed new drivers.
The Device Manager shows all drivers including audio and video working ok, d'nt know what's problem please help me.
Thanks.Hi
Something like that can happen during high HDD activity this means that the reading/writing process could affect the sound/video playback
But usually this should not take long time
At the other hand this can happen because of higher temperature
High temperature can affect the CPU and GPU performance
I think you have used this notebook for couple of month without any troubles in my opinion you should check if cooling modules and fans are clogged and could remove the dust and debris from cooling modules use compressed air spray this helps p get rid of dust
Maybe then the notebook will run much better -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
MAJOR DEFICIENCY = WASTED MONEY:
I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...
Maybe you are looking for
-
How do you get your own videos or movies in iPod 5th Gen
Is it not possible to put our own movies into an iPod? I own my movies, just as I own my music...but I can't figure out how to get any of my movies into my iPod. Or do you have to buy all movies thru iTunes in order to play them on the iPod...??? I w
-
Where is the file? ( ussing jfreechart )
Hi, I have a servlet that generates a chart and I need to save this lika a .jpg The servlet runs but I don�t know where the .jpg file is. I�m working into a remote server (Debian with tomcat) My code is: import java.io.*; import java.net.*; import ja
-
Can I install patches from SAP site?
Dear Friends, I understand that i need some patches are required for my frountend GUI 6.2 for Business Explore and WAD. Somehow the basis support is not good over here. 1) Is there any place, or better way of searching and how to install them on my P
-
HR guru's, can anyone please tell me which Table and Extractor of HR module in R/3 give information about employee's available hours or availibility ?? thanks akash.
-
It's been 1 month since I can't syncronize my phose cause of thath problem.....Gettin frustrated!!!!!!