Equium A110-233 drive not reading any discs - error code 39

Drive not reading any discs.
Something to do with driver. As far as i can tell it says code 39 error.

Hi
Please try the first method:
http://support.microsoft.com/default.aspx?scid=kb;en-us;320553
There you will find a link to the MS website which provides a nice solution.

Similar Messages

Hard drive not reading any disc

I am trying to insert software into my hp touchsmart IQ526 and it wont read any disc i put in

For the purpose of troubleshooting, can the DVD/CD drive read a commercial DVD or a music CD? If no, then probably the drive has failed. From the page illustrating the DVD/CD drive, it appears to be a "laptop" style drive. Harder to change out, but not impossible. If that task is beyond your skillset, try an external drive that connects via USB.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

CD/DVD Drive is not reading any discs on Equium A100

My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

Hello,
Here are a few windows articles that could help.
http://support.microsoft.com/kb/891894/en-us
This one might do the trick, if not try this one.
http://support.microsoft.com/kb/826510/en-us
Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated

This is usually a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

Drive wont read any disc

Model: HPE-030sc
My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc.
When I push the F drive in my computer, it just says program could't be fund.
Anybody who can help.

Alfster76 wrote: Model: HPE-030sc My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc. When I push the F drive in my computer, it just says program could't be fund. Anybody who can help.
Hello Alfster76, Did you uninstall the DVD drive in the Control Panel, Device Manager, then reboot the system and see if it finds new hardware and installs the drivers for it?
Sometimes this works. If not, you might check the data and the power cables going to the DVD drive, just to insure they are properly connected.
If this does not resolve the issue, the DVD drive may have become faulty.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Still no fix for superdrive not reading any disc at all?

I've searched through the forum and it seems like there's still no solution for the superdrive not reading any sort disc at all. I have had this imac for almost a month. I rarely have used the superdrive but was trying to play a normal audio cd tonight and upon further investigation found that the drive is not reading any type of disc.
If a disc is loaded, the drive whirs/beeps 4-5 times while trying to read the disc and then ejects it. this happens for dvd movies, audio cds, osx install disc, etc.
I did successfully play and rip some cds a few weeks ago when the imac was first purchased. I have not inserted discs often enough in the past to substantiate that upgrading to 10.4.5 or 10.4.6 affected the drive's performance.
Think I need a new drive or could this be software related?
imac intel core duo 17" Mac OS X (10.4.6)

I want "solved"
You can add me to the list too - I check this page frequently for a reply from an apple representative - to no avail.
My computer is less than 2 years old, purchased brand spankin' new, w/o the warrantee - but hey when you pay that much for your 'puter it should not break down at ANY time during (at least) the first 5 years, unless gross negligence and disregard is involved (which is is not).
I would not categorize myself as being in the 'high usage' category for burning either dvd's or cd's, but here I am less than 2 yrs after purchase w/ a superdrive that can't even read a store-bought cd, and oddly enough the problems I am having DO seem to coincide w/ download of a 'security update.'
Hmmmm......
I would like, at the very least, a helpful suggestion from someone working for Apple - if not an acknowledgement of an actual issue with a faulty (expensive) product.
A guarantee of satisfaction with a purchase should not be wrapped up in purchase of a service plan - good customer service is good policy, and should be provided as a means of standing behind the quality of a product you both sell, and believe in.
There is no good reason why my computer should be broken, and there is no good reason why it shouldn't be fixed - and I see a lot of you have even more reason for complaint than I do. It is irksome in the extreme that this issue seems not to warrant the attention from anyone who can make a difference to our plight.
One would think that a drop-down menu on an official web-site would have a better response rate from affiliated 'professionals' - but we all know the old adage about assuming...
Hey - maybe customer service really is dead - and I might believe that if it weren't for the fact that I respond, personally, to customer e-mails on a daily basis...
Where is our response?
I apologize for the lengthy "blog" - but short and sweet hasn't done the trick..maybe this will?? We can only hope...

My ENVY 17 3D's Bluray drive does not read any disc.

I got a refurbished ENVY 17 3D (i7 740Q) and having a bluray drive issue.
When I insert a disc in to the drive it keeps spitting the disc out after a few seconds. And I can't hear any motor spinning sound. It's weird, I mean at least it should be reading the disc then spit it out, on the other hand it do exist in my SYSTEM. I didn't have a single burning CD software installed but I did install an iTunes. Should I return it to HP?

Anyone has solution to this, before I decided to send it to HP for repair?
I tried the Optical Drive Diagnostic using HP support assistant, but since the drive keep ejecting the media (CD/DVD/BR) for testing, I can't complete the diagnostic. I uninstalled and reinstalled with the latest drive update, still the same problem, even with the latest BIOS update.
I even went with a complete system recovery reboot and still can't solve the problem. The BR drive worked fine since it's recognized by the system, and Windows does not show any error. So why does it keep ejecting the CD/DVD/BR?
This happened out of the blue btw, so I have no clue what caused the problem. It was working fine like moments ago.

Drive is not reading any discs on my Satellite A100-192

Hi,
today i wanted to watch a dvd movie, i've inserted the disc into the drive and waited for an autostart to play...nut nothing happened.
Drive LED is on all the time and i can't access the drive in windows. I've tried with several original dvd discs and one blank cd /i've got nothing else in here/.
What could cause this problem?
I've tried it in Windows XP and Vista Beta 2 :/
Best regards,
Krystian

Hi
One question: Did you use the Toshiba recovery CD? If not, please check if this issue appears on the Toshiba image.
If you dont get any auto start messages after DVD inserting into the drive so I would firstly check the settings.
Please make a right click on to the drive icon. Then please select the AutoPlay tab.
There you can choose the dvd movie and select an action. Otherwise you can enable the option prompt me each time to choose an action
If this doesnt help so you can also try to remove the drive from the device manager. After this procedure please reboot the unit. The OS should recognize the drive again. Then try to play DVDs again

Blue ray drive not working all of a sudden and not reading any discs

I am using hp hdx 18 laptop which is a few years old and it was working fine until recently i found that the drive doesn't read discs anymore but the device manager shows it's fine and it tries to read by spinning and making noise and then stop
I tried to boot the machine from dvd in setup but it will just go straight to HDD bootup.
is it busted? just wondering what I can do to see if there's anything I can do before getting an external drive
thanks
donald

It could have failed as suppected. When you tried to boot to a DVD or Restore disk, did you remember to change the boot order to DVD/CD first device?
The drive is normally a replaceable device but an external device should work OK, too.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

G5 not reading any discs....?

sorry if this has been posted somewhere, but i did not see anything that could possibly solve this problem. i can eject my tray just fine but when i insert a disc (CD, DVD, burned & regular), the drive wont even spin or read it. so obviously nothing shows up on my desktop. it was working fine until a few weeks ago. i have tried a lens cleaner but my computer wont even read that. i have no idea what i can do to fix this especially since i have not done a lot of burning or movie watching. the machine is a G5 dual 2.0 and the drive is a SONY DVD RW DW-Q28A. any help would be greatly appreciated.

Try resetting your PRAM.
Insert a bootable disk and restart.
When there is the starting chime press the OPTION key: If your disk won't show up as bootable option it may be time for calling Apple.

My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
If not, it will have to be replace.
Allan

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

Hi, My dvd drive ad7586h doesnt read any discs, though diagnostics report fine functionality.plsHELP

1. HP probook 6550b
2. Win 7 Pro 64 Bit (original since bought)
3.DVD drive ad7586h doesnt read any discs, but device manager and HP support assistant report this device to be wortking properly..
4. not aware of any..

Hi,
Please try this:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

CD drive not reading Audio or Photos intel core 2 duo Mac - says there is nothing on disc / Blank - Is there a fix ??

CD drive not reading Audio or Photos
intel core 2 duo Mac -
says there is nothing on disc / Blank - When there is
Is there a fix ??

At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Disc Burning & report what it says, like ...
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Equium A110-233 drive not reading any discs - error code 39

Similar Messages

Maybe you are looking for