Equium A110-233 - I need select manually the boot device from menu

In the last few days when I turn on my laptop the Toshiba screen appears but I need to manually go in and select the boot device to start windows.
(Down the bottom the message 'Press F2 for set up. Entering boot device selection menu')
Why has this started and what can I do to get it to go straight into Windows XP like it used to?

After switching your notebook ON please use F12 button and you will be able to select the first bootable device.

Similar Messages

IPMITOOL - change the booting device from disk to network

I am using ipmitool utility to change boot device on Sun T3 machine. Currently DISK is set as boot device for Sun T3 machine. I am running the following ipmitool utility commands to force boot from network. But everytime I power on/off the Sun T3 machine, it always boots from DISK.
The setup I am in is the following:
I use ipmitool and connect to ilom of sun t3 and perform/monitor the sun t3 host machine.
Thanks.

Thanks.
The host machine is Sparc Sun T3. It is not x86 hardware.
Ideally I would like to use ipmitool to change the boot device. The commands I am running are the following:
ipmitool -I lanplus -H xxx.xxx.xxx.xxx -U root -P tom chassis bootdev pxe clear-cmos=yes
ipmitool -I lanplus -H xxx.xxx.xxx.xxx -U root -P tom chassis bootparam set bootflag force_pxe
Both commands run to successful but no effect on changing the boot device.
I tried with obp command and SP command like you mentioned below, both are not change the boot order. Not tired eeprom yet.
ideally i want to write a shell script which when run would connect to ilom of Sun T3 Sparc and run change the boot device.
Regards,
Edited by: 900765 on Dec 6, 2011 2:39 PM

I need to Enable the Switch list from menu bar

Hi Friends,
i   copied RFITEMAP Program and created the custom report and changes have done according to the requirement
After executing the custom report it was Disabled the SWITCH LIST Option(GRID/CLASSIC)
but standard report we can change layout GRID/CLASSIC from SWITCH LIST Option
How can i enable the Switch list option in Cutom report................
Please help me above issue..
Regards
Venkat Boddu
Edited by: venkat boddu on May 11, 2009 6:49 PM
Edited by: venkat boddu on May 11, 2009 7:01 PM

The option for Switch List is being excluded from the PF-Status when the calling report is not the RFITEM*.
Include LFI_ITEMSF01, Line 379
* list refresh and toggle: only if called by RFITEM**
if caller_repid(6) ne 'RFITEM'.
    wa_extab-fcode = 'REFR'.
    append wa_extab to rt_extab.
    wa_extab-fcode = 'LTOG'.      " Switch List option
    append wa_extab to rt_extab.
endif.
You can replace your Z program name in your Z include or change the condition like
if caller_repid(8) ne 'Z_RFITEM'.
endif.
I assume that your Z program name is Z_RFITEM
Regards,
Naimesh Patel

How do I get an Equium A110-233 to recognise the network card under Linux?

Hi,
I've just bought an Equium A110-233. I partitioned the hard disk so I've got XP and Fedora Core 5 (FC5).
XP works fine when I plug in the network cable, but FC5 (or at least the Linux kernel) does not seem to be able to find and activate the network card.
The message I get is "8139too device eth0 does not seem to be present, delaying initialization". The 8139too module is in memory as is mii (which points to it).
Somehow I need to get Linux to detect that the card is there, but I just don't know how to do that. Can anyone help?
Thanks.

Hi
As far as I know the notebook has a integrated Realtek Network I/F Chip RL8100CL.
I think you should googol around for the compatible LAN driver for Linux which supports this chip.
Unfortunately, on the Toshiba page you will not find any drivers for any Linux distribution because Toshiba doesnt support this OS. ;(

Equium A110-233 Broken laptop screen

Hi, I have an Equium A110-233, the screen is broken.
I have attached an external monitor and it displays when booting up until it gets to the Windows logon screen then it switches back to the laptop screen.
Is there any workaround known for this other than replacing the broken screen?

Hi!
Replacing the interal screen is a little bit tricky because you have to disassemble a lot of. You must remove many parts and screws and for this you should have a little bit experience with it.
An ASP can help you to do this and they can order such part and exchange it or you have a look on ebay.
Normally you can switch between the monitors with FN+F5.
Bye

Equium A110-233: Is there a built in microphone?

Hello,
Is there a built in microphone on this Tosh? It does not work!
Thanks!

Hi,
the Equium A110-233 doesn't have a built in microphone, just a port to connect an external one.
Bye

BW3.5 : Busness content == Need to find the source cube from an web item

Hi,
While executing( preview) an iview of the predelivered CRM business package( com.sap.pct.crm.slsAnalyt.spa.Customer iview for Sales manager), in Enterprise Portal, I get an error " Error loading template 0TPL_0CRM_SM_CUSTOMER".
I can see this perticular web template in BW and when trying to activate this by tranferring into the content windows it brought thousands of other objects( even when I selected 'Only necessary object'). I am not sure whether I should go ahead with the activation.
I would like to know what is the relationship between a cube and a web template and how to findout the related cube from the template?
Also is it possible to activate only certain webtemplates only for queries of a perticular cube?
Thanks
Arunava

Thanks Dinesh,
\ BW3.5 : Busness content ==>Need to find the source cube from an web item
Posted: Nov 2, 2005 10:00 PM Reply E-mail this post
Thanks Dinesh
I would still like to know the relationship between a cube and a web template and how to find out the related cube( or query etc) from the template?
Please let me know,
Thanks
Arunava

I need help with the boot setup in BIOS

I am trying to reinstall windows 7 back onto my sister's laptop, The BIOS Version is 3.5
I went to the boot order to put the cd/dvd rom in the first boot order and then the notebook hard dive second, selecting f 10 to save and exit. When the computer boot up to go through it process, it goes to a screnn saying that boot device cannot be found, please install a window operating system (3F0) Going back to the BIOS and setting the BIOS to default, selecting f 10, save and exit. Goes through the boot up getting the boot device cannot be found.....
Again I go through the BIOS to the boot order and moving the cd/dvd rom first and the notebook hard drive second and selecting the f 10 to save and exit. Anyway, I still get Boot Device Cannot be Found, Please Install a Windows Operating System (3F0).
Can someone please help me or is this a lost cause.

Hi,
Rather than setting the boot priority in the bios menu, try the following and see if there's any change.
Remove the installation dvd and shutdown the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu.
Insert the Windows DVD.
Select the Boot options menu ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can anyone help me, I need to change the address (country) from US to UK so i can purchase?

can anyone help me, I need to change the address (country) from US to UK so i can purchase?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
Can anyone share their experiences and how to with me?
Thank in advance.
Katherine

Hi Katherine,
yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
HTH
Borys

I used my military (.mil) address as the backup for my appleID account, but now that I need to open the verification email from apple, the .mil doesnt allow me to open and verify that I am who I am?

I used my military (.mil) address as the backup for my appleID account, but now that I need to open the verification email from apple, the .mil doesnt allow me to open and verify that I am who I am?

Hey Edgew7,
Thanks for the question. The following resource may provide a solution:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Tap Settings > iCloud and try to sign out.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Tap Settings > iCloud and sign in with the new Apple ID.
Thanks,
Matt M.

We need to pass the customer id from Parent BO report to Child BO report.

Hello Experts
We are using SAP BI BO 4.1 for Business Objects and SAP BW 7.3 as BW Backend.
Requirement: We need to pass the customer id from Parent BO report to Child BO report.
Issue: Customer (0CUST_SALES__CUSTOMER) Characterisitic is used where in the display characteristic is set to Key i.e 'Display As "Key" ' But the In BO the Dimension appreas as Text .
I have tried out by changing the display characteristic as KEY/ TEXT/ KEY & TEXT but still at the BO end the it is displayed as TEXT.
Workaround Tried: I have used the detailed object for the Dimension 0CUST_SALES__CUSTOMER- key in SAP BO i.e the key value where in we are able to view the customer ID. But we are unable to pass the value from parent report to child report as the query level Filter cannot be applied onto a detaield object.
Is this a BI- BO Integration issue?? Kindly help me out with the same.
Regards
Akshay.

Hello Victor,
I have gone through the doc sent. It was helpful.
Info Object (BW)/ Dimension (BO): 0CUST_SALES__CUSTOMER.
In SAP BO the dimension has detailed object under it 0CUST_SALES__CUSTOMER- KEY and 0CUST_SALES__CUSTOMER- TEXT.
Now I can pass "0CUST_SALES__CUSTOMER- KEY" from the parent report. But in the child report we cannot apply Query level Prompt / Filter on the detailed object which will hold the parameter passed from the Parent report.
Q1: Can we apply prompts on a detailed objects?? Is there any configuration changes required.
Q2: Is there any other method the achive the same??
Regards
Akshay.

Need to check the data flow from R/3 to BW server.

Hi BI experts,
This query is regarding need to check the data flow from R/3 to BW server.
As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and find out if there are already any existing objects in BW system which I can use for these reports.
So, can u plz help me.

Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
~AK

Need I disabled the floppy device in bios setup

If I use a SATA HDD and I must set the DVD driver as the first boot device on msi 865pe neo2-s or msi 865pe neo2 motherboard. Need I set the floppy device to disable in bios setup?

If this is just for a one-time boot off the DVD, use the F11 key while booting.

I need to unsubscribe the creative suite from my computer and put it onto my new one, how do i do this

I need to unsubscribe the creative suite from my computer and put it onto my new one, how do i do this

There is a bit of confusion in the way you explain what you want... more on that in a minute. Whatever the scenario is, you are allowed to have the software installed and working on two machines, so if you like you can leave the original installation intact as a backup and just install on the new machine like you did originally.
Back to the confusion... You say "unsubscribe" which would be associated with the Creative Cloud. You say "creative suite" which would not be a subscription (I think they stopped CS subscriptions when the Cloud came into being). So if you have a Cloud subscription you would sign out of it on the old machine if you no longer want it there. Then you could uninstall if you like. If you have a licensed Creative Suite then you would open any one of the applications in it and choose Help -> Deactivate. Then you could uninstall if you like.

Equium A110-233 - I need select manually the boot device from menu

Similar Messages

Maybe you are looking for