Equium A110: Cannot use LAN after wake up from hibernation or standby

Hi guys
I cannot use lan on my tosiba equium A110 after it wake up from hibernation or standby. The lan icon is there bur internet wont work. Please help me out.
One other problem. when i try to cut some thing i cannot paste it if i open a new folder. I have to keep the folder open go back cut it again and then paste it. I mean if after cut i open any folder it wont paste it.
Please help me out .
Thanks

Hi
Did you try to refresh the connection? Something similar happens on my notebook but not with LAN but with WLan. If you right click on the small lan icon you will see the option repair. Check it.
Have found also this possibility. I dont know if it will help but try it.
1. go to [Start] -> [Control Panel] -> select [System]
2. On system properties dialog box select [Hardware] tab -> click [Device manager]
3. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
4. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
5. Press [OK] to close the dialog box.

Similar Messages

Satellite P200-144 shuts down after wake up from hibernation mode

Sometimes when I resume my computer from hibernation, I come back to it (after going to make a cup of tea whilst it boots up, for instance) to find it off again.
I have since observed it more closely and discovered the following: if I resume from hibernation and do not touch the mouse or keyboard, the computer will load up Windows but then hibernate itself again immediately.
If I move the mouse pointer at some point whilst Windows is finishing loading the desktop, etc., then the computer doesn't automatically hibernate.
Has anyone else had this problem and is there a solution?

Thanks for your reply. I am, and always have been, running the latest BIOS. I have never experienced the issue with standby, but that is probably because of the way I use my computer -- with standby, I start using it immediately. I have not tested resuming from standby and not pressing any buttons or moving the mouse.
Have you tested it as I described, by not moving the mouse or pressing any keys when resuming from hibernation, or are you just recalling from memory that you have not experienced it?

Satellite Pro L850 PSKG9A: cannot change brightens after wake up from sleep

Hi guys,
Have a problem with my Toshiba Sat Pro L850 PSKG9A-00C001
Every time i close my laptop screen and put computer to sleep and Then Wake it up again,
My screen is at MAX brightness (Blinding nearly) and i cant change it with my keyboard shortcuts and it says brightness is at Level 1!?
PLEASE HELP THANKS

I found an interesting Toshiba document:
+Display can either be set to the maximum or minimum brightness and brightness regulation do not work properly.+
http://aps2.toshiba-tro.de/kb0/TSB2503AH0000R01.htm
It does not describe exactly the same problem with the brightness but it sounds similar to yours.
The issue can be solved by BIOS update.
Could you check if BIOS update would solve your issue?
Additionally its recommended to update the display driver just in case to check it has an influence on the display brightness control.
_Another method to change the brightness:_
From ATI software Catalyst Control Center -> advanced -> desktop properties -> reactivate ATI color commands and then you can adjust the brightness from ATI tools.

Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to be an issue with activation.

Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to be an issue with activation.
Thanks
Wolfgang

Hi Sukrit,
The software package was bought from german distributor CANCOM on 2013-01-03.
I set up my account at Adobe and posted the serial number.
This is the licence:
After 30 days I could not use Acrobat. Most time I only need the distiller for creating pdf from
Indesign. I reinstalled Acrobat several times, after 30 days it stops working again.
I contacted the support but without success. This PC used WIN XP.
Now I got a new PC win WIN7.
I got the message to visit may account, which I did. I can't remember to ckeck the serial
number.
Photoshop and Indesign are working. Acrobat stopped after 30 days, this is the point my
request started.
Trying to put in the serial number again yields this:
Please be so kind to clear this issue.
With my best regards
Wolfgang Sauer
Am 4 Apr 2015 um 5:59 hat sukritd15 geschrieben:
Hi,I cannot use Acrobat after 30 days on my new PC Win7, seems to
be an issue with activation.
created by sukritd15 in Acrobat Installation & Update Issues - View the full discussion
Hi ,
Could you please elaborate more about the issue?
What are the challenges you are facing with activation of Acrobat ?
The basic method to activate/license Acrobat is by typing in your Adobe credentials ,i.e Adobe
ID and password.
That will let you access Acrobat easily.
Let us know if you are experiencing any more difficulties in activating Acrobat .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting:
https://forums.adobe.com/message/7405504#7405504 and clicking `Correct´ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To
post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message
please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7405504#7405504
To unsubscribe from this thread, please visit the message page at ,
click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to
https://forums.adobe.com/thread/1516624.

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

K8N Neo-FSR CPU fan at full throttle after wake up from S3 (Suspend to RAM)

Hi,
using either Core Center or BIOS' smart cpu fan control my cpu fan throttles down to less than 2000 RPM without system load. Fine! But after wake up from S3 (Suspend to RAM) power down the cpu fan runs forever at full throttle with about >5000 RPM, making lots of noise. So far I didn't succeed neither with BIOS settings nor using Core Center to gain fan control after S3 wake up. Since Core Center apparently shows up the cpu temperature correctly with less than 40 degrees Celsius this may be a BIOS 1.4 bug.
Can someone please point me into the right direction? Yep, I did read the FAQ and already use board's search function :-)
Falo

addendum
did some further testing. Apparently this doesn't happen if I wait at least a couple of minutes between shutdown to S3 and wake up. In this case fan control works as expected afterwards.
Falo

After update to 10.7.1, Wifi retrieved after wake up from sleep?

Anyone who had "no wifi after wake up from sleep @ MBA 2011 " issue before, is this fixed after 10.7.1 update installed? Any tester please drop your comment.

In another Mac forum saying that after the 10.7.1 update, need to reset the PRAM to get this issue solved.

9600M GT: 5W more power-draw after wake up from sleep?!

Hey Ladies!
I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
Looks like a bug to me?!

Hey Ladies!
I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
Looks like a bug to me?!

Cannot use CS2 after reinstalling on a new computer

cannot use Photoshop CS2 after reinstalling it on a new computer

Hewlett Packard computer. I reinstalled CS2 on new computer and have used it, but now I keep getting a message that the 30 day trial has expired. I have my disc in but this doesnt help. I have been trying to re register it, but that is not working, it just cuts it off. Cant get past the registration point.

Cannot use emacs after the recent security update

After the most recent security update (Feb. 2008) for OS X 10.4.11,
I cannot use emacs anymore. The error message from the computer
is:
emacs: execv(/usr/bin/emacs-ppc) failed: Permission denied
I am using Powerbook 12". Anyone can help me to solve this problem?
Thanks,
Jack

Welcome to the Forums Jack!
First...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Repair permissions and try a Safe Boot, hold shift at startup.
If that doesn't work and you have enough space on the HD, then you can try an Archive and Install feature...
http://docs.info.apple.com/article.html?artnum=107120

Cannot use telephone after setting up fax

I use the same line for talking and faxing. After I plugged in the phone line to the fax my phone stopped working. I can dial out and the phone rings in but nobody can hear me and I cannot hear them.

Hi @acmyra76,
Welcome to the HP Forums!
I see that you cannot use your telephone after setting up fax with your HP Officejet 6830 on Windows 8. I am sorry to hear this, but happy to help!
Is your phone line an analog or digital phone service? Analog. Digital. What’s the Difference?
If your phone service is digital you may need to get a filter for the line.
I would recommend going through this guide, Cannot Send or Receive Faxes, to verify the fax is connected properly.
For future reference, here is your printer's user guide, HP Officejet Pro 6830 e-All-in-One Printer User guides.
You might also want to contact your phone company as well, just to make sure there are no issues with them.
Hope this information helps, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot use photoshop after paying for subscription

I had been using photoshop on a monthly subscription and I stopped it. Could not restart that subscription so I paid for a new one. Problem now is I cannot use photoshop at all. I tried entering the old serial number to see if it would work and it did not. I have not received a new serial number for the new subscription. I also tried downloading the creative cloud for photoshop to install and i got an error. I do not know how to fix this problem.

I got the Creative Cloud to Install. I did use the steps that were given in other discussions here and those did not work. I did find this on a google search and it worked. The only thing I did not do was the CC Cleaner since Creative Cloud was never installed in the first place.
1. Restart Windows
2. Download Creative Cloud Cleaner Tool
3. Run Creative Cloud Cleaner tool and choose option 3 and then option 1 to complete the cleaning process.
4. Once done please rename OOBE folder from these locations:
Windows:
C:\Program Files (x86)\Common Files\Adobe
C:\Users\(UserName)\AppData\Local\Adobe
5. Restart Windows
6. Download Creative Cloud
7. Run Creative Cloud file (CreativeCloudSet-Up.exe).
And it worked just fine and now Photoshop is working.

Ipad mini cannot use Safari after connecting to Youtube?

My ipad mini doesn't seem to want to open Safari after I try to watch videos on Youtube. I tried using the Youtube app, reinstalling it, and using Safari to open up Youtube videos, but no go. It seems that my ipad mini is also unable to use Safari after trying to watch these videos, and I have to go out of my way to turn off and turn on the Wifi button again. This is already my second ipad mini, because I exchanged the first one due to the "battery charging" issue.
I've already tried to do the home button + power button reset and reset all my other settings. I know it's not my router because I can use my netbook and my mom can use her laptop on it, and even her ipad. I have also had this ipad for about a month now, and the problem only arose this afternoon. If there is an internal problem, I'd really like to exchange it again while I still have warranty, but I was just wondering, did anyone else seem to have these problems? And if so, did you get it fixed?

Go into Settings -> Safari -> Clear History and Website Data

Can't delete a file displayed in ListView ("File in use") even after removing it from window.

I have a ListView displaying a collection of icons. The user can then select different icons (checkboxes) to do things like Copy or Delete.
Problem is, when I try to delete the actual file from the disk, I get an error telling me the file is "in use" ("vshost.exe", the VS runtime during testing).
I thought maybe it was because it still appeared in the window and was still in the ImageList, but even after removing it from both locations, I still get the error. My code:
Dim intCnt As Integer = 0
Do
ImageList2.Images.RemoveAt(intIconsChecked(intCnt)) ' Remove from collection.
lsvCollection.Items.RemoveAt(intIconsChecked(intCnt)) ' Remove from ListView window.
FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".rsc") ' "+1" b/c Icons start with "01".
FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".png") ' "In use" Error here.
".rsc" deletes just fine, so I know I'm deleting the correct file. Why does VS still think the file is still "in use"?
Thx

Mugsy,
Consider this as food for thought, even if you don't use it.
If you set it up right then you can control how it works. A reference is a reference and any left behind will cause you grief down the road when you try to delete things.
As an example, a simple class follows. It does *not* implement IDispose, although it does have a private shared Dispose method in it:
Public Class MyImages
Private _bmp As Bitmap
Private _name As String
Private _sourceFilePath As String
Private Sub New(ByVal bmp As Bitmap, _
ByVal name As String, _
ByVal filePath As String)
_bmp = bmp
_sourceFilePath = filePath.Trim
_name = name.Trim
End Sub
Public ReadOnly Property Bmp As Bitmap
Get
Return _bmp
End Get
End Property
Public ReadOnly Property Name As String
Get
Return _name
End Get
End Property
Public ReadOnly Property SourceFilePath As String
Get
Return _sourceFilePath
End Get
End Property
Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
Else
' Should do validation here that the file
' is actually an image but I'll not do this
' here...
Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
miList.Add(New MyImages(thisBMP, GetFileNameWithoutExtension(imageFilePath), imageFilePath))
End If
Catch ex As Exception
Throw
End Try
End Sub
Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String, _
ByVal imageName As String)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
ElseIf String.IsNullOrEmpty(imageName) OrElse imageName.Trim = "" Then
Throw New ArgumentException("The name of this image cannot be null or empty.")
Else
' Should do validation here that the file
' is actually an image but I'll not do this
' here...
Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
miList.Add(New MyImages(thisBMP, imageName, imageFilePath))
End If
Catch ex As Exception
Throw
End Try
End Sub
Public Shared Sub Remove(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String, _
Optional ByVal removeFilePathAlso As Boolean = False)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
Else
Dim findInstance As System.Collections.Generic.IEnumerable(Of MyImages) = _
From mi As MyImages In miList _
Where mi.SourceFilePath = imageFilePath
If findInstance.Count <> 1 Then
Throw New ArgumentException("The instance of MyImages specified by the" & vbCrLf & _
"image file path is not in the collection.")
Else
Dispose(findInstance.First)
If removeFilePathAlso Then
My.Computer.FileSystem.DeleteFile(findInstance.First.SourceFilePath)
End If
miList.Remove(findInstance.First)
End If
End If
Catch ex As Exception
Throw
End Try
End Sub
Private Shared Sub Dispose(ByVal instance As MyImages)
If instance IsNot Nothing AndAlso instance._bmp IsNot Nothing Then
instance._bmp.Dispose()
instance._bmp = Nothing
End If
End Sub
End Class
When you look through that, look specifically at the "Remove" method and in particular, look at the order in which things are done. That's the critical part in this.
I tested it with a simple form:
Two buttons, a checkbox, and a picturebox. I also copied a small folder full of image files to my desktop since I'll be deleting a file from it. Following is the code for Form1:
Option Strict On
Option Explicit On
Option Infer Off
Imports System.IO.Path
Public Class Form1
Private miList As New List(Of MyImages)
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim desktop As String = _
My.Computer.FileSystem.SpecialDirectories.Desktop
Dim imgFolder As String = _
Combine(desktop, "Images")
PictureBox1.BorderStyle = BorderStyle.FixedSingle
For Each imgFilePath As String In My.Computer.FileSystem.GetFiles(imgFolder)
MyImages.AddNew(miList, imgFilePath)
Next
btn_RemoveFirstImage.Enabled = False
CheckBox_RemoveSourcePath.Enabled = False
End Sub
Private Sub btn_ShowFirstImage_Click(sender As System.Object, _
e As System.EventArgs) _
Handles btn_ShowFirstImage.Click
Try
If miList.Count >= 1 Then
With PictureBox1
.SizeMode = PictureBoxSizeMode.Zoom
.Image = miList(0).Bmp
End With
btn_RemoveFirstImage.Enabled = True
CheckBox_RemoveSourcePath.Enabled = True
End If
Catch ex As Exception
MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
"Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
End Try
End Sub
Private Sub btn_RemoveFirstImage_Click(sender As System.Object, _
e As System.EventArgs) _
Handles btn_RemoveFirstImage.Click
Try
If miList.Count >= 1 Then
MyImages.Remove(miList, miList(0).SourceFilePath, CheckBox_RemoveSourcePath.Checked)
End If
PictureBox1.Image = Nothing
btn_RemoveFirstImage.Enabled = True
CheckBox_RemoveSourcePath.Enabled = True
Catch ex As Exception
MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
"Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
End Try
End Sub
End Class
Running it is straightforward:
Now when I click to show the first one:
A different image is shown because that first one no longer exists - either in the collection or in the folder.
Closing/disposing all references is the key and the order matters.
Something to consider the next time around. :)
Still lost in code, just at a little higher level.

Equium A110: Cannot use LAN after wake up from hibernation or standby

Similar Messages

Maybe you are looking for