Equium A200-1VO - Replacement DVD Drive

Hi,
I was wondering if anyone could help me find a replacement CD/DVD Drive for a Toshiba Equium A200-1VO. Would i need to get the exact same model DVD Drive or is there another suitable drive available that will work?
I know how to fit the drive so installation isn't needed
Many Thanks
Nick

Hi!
I have also replaced my DVD drive on an older Toshiba notebook and I can say you should only install a DVD drive that is listed in the user manual.
So you can make sure that the new drive will work because the drive has the same pin assignment.
If you dont have the user manual you can download it on the Toshiba website. ;)
Bye

Similar Messages

  • Touchsmart IQ542 - Replacement DVD drive

    Does anyone know where I can get a replacement DVD drive for my Touchsmart IQ542? The current drive has decided that it really likes the DVD that is currently in it and won't spit it out, I suspect that this problem will only get worse so now is probably a good time to replace the drive.
    Ideally I would like to put a Blu-ray drive in but if that's not possible a replacement for what is already in there would be fine.
    This question was solved.
    View Solution.

    Hi,
    Sure. Here is a search I did for UK sources for the part.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • G x64 replacement dvd drive

    I am having trouble locating a replacement dvd drive for a HP G6 2240sa laptop.
    Part no. 681814/001
    HP do not have in stock and none of their spares partners either.
    Had no help from HP.
    Plenty of used ones in USA but postage is far too high.
    Any sugestions please.

    http://www.ebay.com/itm/HP-Pavilion-15-6-G6-2000-Genuine-SATA-DVD-RW-Burner-Drive-GT50N-681814-001-G...
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.X681814-001&_nkw=68...

  • Is it available to replace DVD driver in MacBook Pro with SSD 512GB Crucial m4 2.5-inch SATA 6Gb?

    I'v external DVD driver and I'd like to replace DVD driver with in MacBook Pro with SSD 512GB Crucial m4 2.5-inch SATA 6Gb.  Is it available? All your opinions are welcome.

    Here is a post from another thread on this problem.
    So here's the deal, don't expect SATA III devices to work on the optical port.  I just went thru this on both my 2009 and 2012 13" MBP's.   The 2009 is SATA II (3Gps) and the 2012 is SATA III (6Gps).   A SATA III SSD (OWC 6G) will only connect at 1.5 Gps on the 2009.  On the 2012, it actually connects at 6 Gps, but every drive I tried crashed (dropped drives, file errors, kernel panics), including a Samsung 830 and  Seagate Momentus XT 750.  Out of desperation, I stuck the (slow 500 Gb) Apple HD in, it connects at 3 Gps and works like a champ.   Check your System Info on SATA info.   If you have a 2009, don't waste your $$$ on high end SSDs or drives.  If you have newer, BEWARE, you're likely to have issues with high end SATA III devices.    On the bright side both Samsung and OCZ V4 work great on the main drive (450 MB/s read) and boots in 10 seconds!!      The optical drive SATA port is a major issue for everyone ( like me ) who buys MBPs because they can trip them out, this is a real nagging issue/obstacle.   This is a firmware issue that needs to be addressed by Apple. I'm hoping for a firmware update and that Apple isn't doing this intentionally.
    Posted by Halfmoonh4
    Found here.
    https://discussions.apple.com/thread/3949727?tstart=0

  • Satellite A200-AH5 CD/DVD drive does not burn any CDs

    I own a Toshiba Satellite laptop (A200 -AH3) running Windows Vista Home Premium.
    For what it is worth, the processor is a T2085 @ 1.73 GHz. It is a 32-bit Operating System.
    In Device Manager when I click on DVD/CD Rom drives, I get TSSTcorp CD/DVDW TS-L632D ATA Device.
    Clicking on this I find that the driver is working properly and up to date. I have not been able to burn a CD on this system...
    I have not tried to burn a DVD.
    I have run through all the steps for burning a CD, however, but even though it goes through the process of showing the progress as each song from a playlist is burned to disc, when the disc is supposedly finalized...there is nothing on the disc when I try to play it back and with the exception of iTunes or another program opening when I place the CD into the drive to be played, absolutely nothing happens.
    I tried burning music on a disc on my sister's desktop computer and it burned fine.
    So...It is not a problem with the discs.
    When I took the disc my sister had burned and placed it in the disc drive on my laptop, it displayed the tracks that had been burned and it played the music just fine. This has me really thrown for a loop.
    The laptop is only a year old and I can't burn a single thing.
    Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I have no idea if it will burn a DVD, but I have ruined 2 boxes of CD-R discs already. After the disc has supposedly burned the music...even though no music has been burned...the disc is ruined and has to be tossed.
    I am not terribly knowledgeable about techncal aspects of computers, so I hope you can speak to me in general terminology if you respond to my problem. I really hope someone out there can advise me as to what is going on or what I should do to resolve the problem.
    Thanks for any help in advance!
    Thanks.
    Gord
    Canada

    Hi
    In your case I would recommend trying different CDs from different manufacturers.
    You should know that not all CDs or DVDs would be fully compatible with your internal CD/DVD drive.
    In many cases not compatible CD or DVD would cause exactly the same issues which you have described in your message so try different medias!
    Furthermore I would recommend checking the Toshiba driver page for an CD/DVD drives firmware update.
    As Im not mistaken the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for some new firmware. Maybe a new firmware is available
    Last but not least you could switch to other burning software Im using the Nero In my opinion its the best applications for such purposes

  • Replacement DVD drive for a Portege A100

    Hi
    My Portege's DVD drive is making horrible clicking noises and appears to be on its way out. I have read from a thread on here that universal drives might not work as the Portege's BIOS has assigned the DVD drive as slave and that the new drive must be slave in order to work. Is this correct? I really do not want to be doing the soldering fix!
    I have another laptop which has a TSST drive in and i plugged this in and the portgege showed an ide error. Is it just a matter of having the correct firmware or is the issue regarding the ide settings mentioned above.
    I have shortlisted a Toshiba dvd drive PA3162E-2CD2 but it says it is compatitble with the Portege 4000, 4010, M100 and Tecra 9000, but does not list the A100 as compatible. Does anyone know if this drive will work on my machine?
    Thanks in advance.

    Hi again
    You are right. I have checked users manuals and there is nothing about compatible ODDs (optical disc drive). I recommend you to replace it wit the same model. Portege A100 is not known to me (I believe it is designed for UK market only) but ODD replacement is pretty simply. I believe ODD is fixed and it is mostly done with one screw that you can find on bottom side. After removing the screw you can take ODD out of notebook.
    New drive must be placed into same place, fixed with screw and the job is done. If nobody offer any help here you can see if you will be able to remove ODD alone.
    Bye and good luck!

  • Replace DVD Drive

    I have an HP 7320 slimline desktop, running XP 32 bit. I'm upgrading to 2 gig memory, and need to replace the DVD drive. It is IDE; however, the hard drive is SATA. On the motherboard, it looks like there is a second, open connector for another sata device. My question is it available for a new DVD drive? I do not like the cable for the IDE drive. The problem with the current drive is when I push the button to open the drive it "kerchunks" a couple of times, but the drive does not open. I tried using a straight paperclip & punched into the small hole on the front of the drive, I can feel it engaging in some sort of a button inside, but the drive does not open. Can I replave with a SATA drive????

    Hi:
    Yes, you should be able to, if you have a SATA power connector near the DVD drive you plan to replace with a sata one. 
    You will also need a SATA data cable, of course.
    I did that on an old HP d530 CMT.  I didn't have a SATA power connector near the optical drive, so I had to get a Molex to SATA power adapter.
    Below is what I got.
    http://www.tigerdirect.com/applications/searchtools/item-details-print.asp?EdpNo=3151189&Sku=ULT4010...
    Mine had an IDE HDD and IDE DVD.
    So after replacing both with SATA and those thin data cables, it really opened up the real estate in the case for better airflow.
    Paul

  • CD-ROM error on boot after replacing DVD drive -Qosmio F20-574

    Ok so I have a Toshiba Qosmio F20/574 and I'm trying to replace the factory DVD drive (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD drive Im getting a CD-ROM error on boot. The only time I do not get it is when I boot with the factory DVD drive.
    Here are the things I've tried...
    -Cleared the CMOS
    -Removed the bezel to make sure its plug all the way in
    -used the EEPROM utility to set the drive to slave.
    -tested the drive in another laptop
    -unistalled the factory dvd drive through device manager and tried to boot with the new dvd drive
    Here are the things I found weird...
    - in the BIOS (ACP BIOS 1.30) under Device I/O it shows the Hard Drive and cd drive but its not listed by name, its showing only the IRQ of the master and secondary IDE controller (Built-in HDD Primary IDE (1F0H/IRQ14), CD-ROM Secondary IDE (170H/IRQ15)). This doesnt change, even if I boot without a DVD-Drive.
    -There is no BIOS update available for this laptop. This is a Toshiba from Japan and Ive tried using Qosmio F20 BIOS 1.40 from another region but it doesnt work.
    -I cant seem to find an update firmware for the Liteon DS-8A1P (CX17)
    I cannot think of anything else to try. I really need help! Any ideas?

    Hello
    your Liteon DS-8A1P (CX17) currently in SLAVE or CABLE SELECT Mode
    you must make it as MASTER
    Toshiba accepts drives in MASTER settings only
    you can not make it by jumper , because there is no jumper inside the drive
    you can make it master by:
    1-firmware update to the drive to make it MASTER.
    2-by soldring pin 47 to pin 45 inside the drive (not recomended).

  • Where can I buy a replacement DVD drive for a mac mini A1347

    My mac mini is out of warranty and my toddler stuffed several discs into the drive slot.
    Whenever it booted, it made a horrible ratcheting clicking noise, but couldn't eject anything.
    I disassembled the entire computer, and pulled all 3 discs out with pliers. After reassembling, the computer works fine, but the DVD drive won't "catch" a disc and pull it in. I'm pretty sure some gear or something has been irreparably damaged, or that I bent it as I was pulling the disc out.
    I've been having a difficult time trying to find a replacement drive to order anywhere.
    Besides going with an external USB drive, does anyone know of the cheapest option for a replacement slot drive for the mac mini A1347. (AKA "mid 2010", AKA Core 2 Duo DDR3).
    I don't want to haul it down to an Apple Store and pay a huge premium to have them diagnose and replace a part that I'm very capable of doing myself.
    -John

    If your in the US then the ifixit link is a good option, in the UK the following is an option
    http://www.applemacparts.co.uk/store/mac-mini-intel-mid-2010-a1347-core-duo-c-76 85_8044_9197_9198.html?filter_id=1371&sort=1a
    However when I had to replace a drive in a Mac mini, I bought a bare drive off eBay.

  • Replacement DVD drive - broken Mashita drive

    Hi,
    I have a broken Mashita DVD burner, probably the UJ-845-B (I already removed it), but this one is no longer available. I'm looking for a replacement internal Drive. I've seen people using Pioneer, Sony and other types of Mashita DVD burners, but usually with other iMacs.
    I've got some questions:
    1. What DVD burners are compatible with my iMac G5.
    2. If I install a newer model Mashita will I need to update firmware and where can I get it (or does Apple provide it)
    3. Other things I need to take into consideration before buying a new one
    Thanks,
    Eric

    Hi,
    Just some info on my own question:
    I purchased a NEC/Sony Optiarc AD-7633A. I removed the old Mashita ( "How-To" documentation can be found on Apple's website) and then replaced the bezel (front side where CD/DVD's go in) from the Optiarc with the old one from Mashita. Some simple cutting of little clips is necessary to make things fit well. Place things back and works like a charm.
    No updating of Firmware necessary and the Apple immediately recognizes the DVD drive
    Good luck for all of you who need to replace their own Superdrive.
    Eric

  • Replacing DVD Drive

    I have a Pavilion dv6-1360us Notebook that I believe has a bad DVD drive.  The drive will write to a CD but not a DVD.  I've tried all of the "fixit" and recommended solutions without success.  I found the replacement drive (DVD SATA Optical Drive - pn 511880-001) on HP Parts site for about $90 bucks but am wondering if I should try to remove/replace the drive myself.  Does anyone have any suggestions or recommendations?  Are there any instructions available to take on this task?  Thanks for responding.
    This question was solved.
    View Solution.

    Hi,
    The procedure to remove the optical drive is detailed starting on Page 48 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Looking for replacement DVD drive

    Have a P6650z desktop, and the dvd drive needs to be replaced. I intentionally didn't get a Dell b/c I was thinking that I'd be getting better hardware.
    OK I'm looking at a couple of DVD drives, but I'm not sure if they will fit the bay of my Pavillion or not--the Pavillion has a special eject button on the outside of the bay itself. Could I install either of these drives into my Pavillion?
    http://www.amazon.com/Asus-DVD%C2%B1RW-DVD-RAM-Internal-DRW-24B1ST/dp/B0033Z2BAQ/ref=sr_1_1?ie=UTF8&...
    http://www.bestbuy.com/site/Asus+-+DVD-E818A7T+Internal+DVD-Reader%2C/3998897.p?id=1218446822405&sku...
    This question was solved.
    View Solution.

    Hi,
    Based on this link, your machine uses standard bays that means any standard Optical drive should fit. Do you have any plan to add Blue Ray drive on your machine ? If YES, you can go for BD drive now, probably you have to pay around $10 more.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need replacement dvd drive for ad-7910A

    Hi,
    I have a Lenovo T61 that was dropped and damaged the dvd drive - the dvd drive is a sony nec ad-7910a which is 9.5 mm thick and IDE (i believe). I tried everywhere for an exact replacement, but apparently this dvd drive is obsolete. Anyone know which available dvd drive would be a suitable replacement?
    Thanks 

    dvd drive or dvd burner?
    DVD Burner Multi (Hitachi LG the best one good for all discs) - P/N 39T2679
    DVD Burner Multi (Panasonic the worst one in my opinion) - P/N  39T2677
    DVD/CD Burner Combo (Hitachi LG) - P/N 39T2687
    Don't think there is DVD reader available for the T61 (maybe i am wrong) there is one available for the old T4x series which you can also use but facia is slightly different, but won't affect the performance, you can get them on the ebay for couple of dollars.
    Hitachi LG dvd-rom P/N 92P6579 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Replace dvd drive with SSD

    I am thinking about removing the dvd drive in my macbook pro 15" and putting in a SSD drive. Then create a fusion drive using both the existing harddrive and the new ssd.
    What is recomended?
    1) Swapping the hd to the dvd and putting the ssd in the existing hds place.
    2) Or just replace the ssd with the dvd-drive? Leaving the HD where its at.

    MacBook Pro's, for some reason, like the boot drive in the 'original' HD location. I have no idea if this would be the case with a DIY 'fusion' drive, however.
    You may want to actually call OWC to see what they recommend (and, if you're going to replace the optical drive, you simply can't so better than the OWC Data Doubler)...
    Good luck,
    Clinton

  • Need to replace DVD drive on my system.

    My DVD drive has finally died after years of service and was wondering which of the following would be a good replacement to use:
    Pioneer DVR-710
    Pioneer DVR-112D
    I know several people have used the 112D and given good reviews about it. Has anyone used the 710?

    Hi-
    Here are some user reports with the DVR-710/111:
    http://www.videohelp.com/dvdwriters/pioneer-dvr-111d-dvr-710/1522
    Entering Pioneer DVR-710 into the xlr8yourmac data base yields 14 reports:
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

Maybe you are looking for