Equium A210-171 - Vista Resume Failure

Equium A210-171 running Windows Vista Home 32-bit.
On Boot, I get Windows resume loader screen indicating error and asking to select either 'continue with system resume' or 'delete restoration data and proceed to system boot menu'. BUT keyboard will not respond (not even to select caps lock). Have to turn off at switch to restart.
Any key press after Toshiba boot splash screen produces a blank screen (even f8 and other function keys).
Tried default BIOS settings to no effect.
This problem occurred a couple of months ago and was resolved by wiping Hard disk and putting on a new copy of windows from a Vista CD. Now it is back again - cannot keep starting from scratch!

Have managed to recover normal Windows boot, by removing the hard disk, connecting it to another machine and renamed then deleted the hibernate file.
The hard disk checks out ok on testing, but there does not seem to be any reference to SMART support in this BIOS. It seems that windows or power failure during hibernate was the source of the Hibernate issue
However the problem with the keyboard still remains Any key-press between the end of the Toshiba splash screen and the opening of the operating system freezes the machine, and an external USB keyboard is similarly affected.
Hence it is not possible to use F8 to select windows repair options, and it is not possible to Boot from a DVD/CD if that boot operation requires press enter to boot from DVD as does the Windows install DVD or Anti-Virus boot CDs.
When this happened before, the BIOS was upgraded to ensure that a corrupt BIOS was not the source of the problem. However, the Toshiba BIOS upgrade software prevents reinstallation of the same or older version of the BIOS. So, as there has been no upgrade since version 2.0, BIOS replacement is not an option - BAD software design by Toshiba!!!
Any Ideas to clear this problem?

Similar Messages

Equium A210 -171 - how do I re-install Vista

Hi,
I was updating the O/S (Vista 32Bit) on-line from Microsoft when the laptop (Equium A210 -171) shutdown.
It may have reached the overheating limit and this is the reason that it shutdown (me guessing).
I let the computer cool down and when I tried to boot from the instructions as per
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1845345& rpn=PSL48U&modelFilter=L45-S7423&selCategory=3&selFamily=107376866
the computer seems to lock up.
When I get to boot in Safemode the computer seems to lock up on \windows\system32\drivers\disk.sys or some other system file.
The action of pressing 0 and then turning on the computer with the Product Recovery CD-ROM in the drive also results in a lock up of the system resulting in a black screen only. Pressing C at startup also produces the same effect.
As a test I put a Linux Ubuntu CD-ROM into the drive to see if I could run another O/S on a different HD.
This action was successful. But my children need Windows for the games that they play.
So, my question is ... how do I re-install Vista. The factory re-install setup seems to be not functioning.
Many thanks,
Tommy.

> As a test I put a Linux Ubuntu CD-ROM into the drive to see if I could run another O/S on a different HD.
I mean you have installed a Linux on different partition and not HDD. Right.
Well, this means that HDD is OK and the notebook should run with Windows as well.
> The action of pressing 0 and then turning on the computer with the Product Recovery CD-ROM in the drive also results in a lock up of the system resulting in a black screen only. Pressing C at startup also produces the same effect.
First of all I recommend start the BIOS and to set booting from CD/DVD drive at the beginning.
Then save the changes and reboot the unit.
While pressing the power button, press F12.
This allows you to get the boot menu on the screen.
Insert the Windows installation disk (or Toshiba recovery disk) and choose ODD (CD/DVD drive)
Then notebook should start to boot from CD/DVD drive.
Note; if you are using Windows CD (not recovery disk) then you should change an option in BIOS.
Set the SATA mode to compatible and save the changes.

Re: Equium A210-171 - How can I burn a Recovery disk

I have a Equium A210-171 and I believe there is and onboard recovery to bring back to factory settings.
Could someone please help be in how I can do this or burn the onboard to cd. or even where I can get the cd from.
Cheers

If you didnt get recovery DVD and if you have HDDRecovery folder on second partition, that means your notebook is delivered with HDD image only.
You can create recovery media using Toshiba Recovery Disc Creator. The shortcut should be placed on the desktop.
I have done this several times on different models successfully using all the time Verbatim or TDK DVD-R media.

Equium A210-171 - Maximum hard drive capacity?

What is the max capacity hard drive the equium a210-171 can take?

Hi turboiwan,
As far as I know Equium A210-171 has already SATA interface for HDD so you can install every HDD with this interface because on SATA standard are no capacity limits. That means 500GB HDDs or more would work.
For example I upgraded my notebook with 500GB Western Digital HDD and this worked great.

Equium A210 171 What info do i need before i use the recovery disk?

Hi,
I have 1 recovery disk that came with my equium, haven't used it before.
On the back of the recovery disk envelope it says "insert the first disk"
I'm assuming there should be a second?
Also what info will i need to provide during the install process? like serial number?
All i have is a black and white sticker that's on the side of the box it came in, but that was so long ago.
I'm having lots of issues with windows installer not running and many others,
Windows updates won't work either and i've tried to fix those but a clean reinstall of the os was recommended.
Now at this point nothing will install because windows installer won't work.
So i think i wil lhave to attempt a clean install, but i'm not even sure the cd drive will work.
I have gotten a great run out of this laptop, bit slow for my needs today but over all great product, bought in 2007.
With a clean os and 4 gigs of ram this thing could last for years more, can't afford a new one right now.
I have really tried to avoid using a recovery disk in the past, as i've never had any serious issues till now.
Thanks
Message was edited by: sounds

> I have 1 recovery disk that came with my equium, haven't used it before.
>On the back of the recovery disk envelope it says "insert the first disk"
>I'm assuming there should be a second?
Im wondering why you get such disk together with your notebook why? Because I did not get the recovery disk but I had to create one using the Toshiba Recovery disk creator software
But my notebook is newer than your A210 this might be the reason why you got such disk
I created a recovery disk and I needed two DVD disks I think these depends on the image file size
> Also what info will i need to provide during the install process? like serial number?
This is not needed because your system was already activated.
But I recommend to backup your personal data because the recovery disk would format the whole HDD and you would lose the files.
PS: recommend reading the other threads in the Product recovery forum!

Equium A210-171: CD won't run and ODD error code 19

Hi,
I was trying to run a cd that came with my sony walkman but the cd won't run
So i went to Device Manager and noticed that there's a yellow info triangle in front of the: TSSTcorp CDDVDW TS-L632H ATA Device
There's a messege when i try to update the driver
(Windows cannot start this hardware device because its configuration info ( in the registery ) is incomplete or damaged (Code 19)
Any sugestions please?
Is there a free driver scanner and repair tool maybe?
Thanks in advance
Message was edited by: sounds

Hi,
I don't want to destroy anything so not touching it untill i know
I just want to know if i should uninstall that TSSTcorp CDDVDW TS-L632H ATA Device
Then do the registery part
But considering i can't update the TSSTcorp CDDVDW TS-L632H ATA Device
And i can't get the fix it thing to work, if i uninstall the TSSTcorp CDDVDW TS-L632H ATA Device
Then delete those registery entries, how will it be reinstalled.
Message was edited by: sounds

Equium A210-171 Control Panel\Hardware and Sound Missing Realtek HD Audio

Hi,
I was doing some updates the other night and went into msconfig,
I think i clicked hide all microsoft services and then disabled everything or most of not sure.
But usually when i go to Control Panel\Hardware and Sound i can see a tab to realtek hd audio
When i click that i get another control panel/window where i have some options to change sound
Like i had a few options where i could select to use effects like Hall, Disco, party etc
Also installed realtek AC 97, not sure if that was needed, i cant see the realtek folders in program files though.
It has another option to fix loudness which is handy to give volume a small boost.
Could anyone tell me how to get realtek back in Control Panel\Hardware and Sound
Thanks in advance

I managed to fix it by uninstalling it from add/remove programs and then i found the drivers for my os
Yes btw i still have the os that it came with and she runs great for a laptop i bought in 2007
Toshiba will definitely be my next purchase though :)

Equium A210 - Coke in the keyboard

Hi everyone;
I just bought an Equium A210 - 171; but buy accident, I spilt the Coke into the Keyboard. I have tried to clean everything, even single buttons, it works but all the buttons are still so sticky, hard not like the original anymore.
Anyone know how to fix it or where to buy a new keyboard for it?
Thank you very much

I've had the same problem. I bought a new keyboard from eBay, it works fine.
But I have heard you can take the keyboard out of the laptop and soak it in water, I know it sounds dull but its only water. But you must dry it through and through before installing it. Use a hair dryer first then leave it in your airing cupboard for at least 48hrs.
Can anyone support me on this?

Equium A210 - inconsistent Wi-Fi network

I have an Equium A210 laptop (Vista) networked with a PC and a Netgear router.
Quite often I cannot access my network from the laptop, although I have no problem accessing from my mobile in the same location as the laptop.
The problem would appear to be with the laptop.
Please help

Hi
Have you disabled the WLAN power saving feature in Windows Power Management? You should set it to maximum performance. For this option check also this useful document:
http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
Otherwise try also updating the WLAN driver and BIOS. Both can be downloaded on the Toshiba European driver download page.
Last but not least I would also recommend updating the firmware of your router.

Re: Downgrading Equium A210-1AS from Vista to WIN XP

I have a fully functioning desktop and a barely working Equium A210-1AS I have Avanquest Fix-It 10 working well on the desktop. I installed Fix-It 10 on the Equium and after a day or so the computer crashed. It would boot and after endless restore operations and uninstalling a not-needed program and Fix-It 10 the computer is sort of working with a peculiar message. I was too mean to pay an extra 30 for a recovery disk for the Equius which has Vista Home OS. Now it so happens that I have a genuine OEM CD of WIN XP in my possesion. I bought it and used it on a desktop that I eventually took to the Council rubbish dump when it stopped working.
Can I create a CD with all the XP drivers downloaded from the Internet then just boot up with the WIN XP disk then insert the drivers CD?
I believe I could activate WIN XP by telephone and explanation. Would this work and what would the difficulties be? I do not need to save any data.
BTW I like XP and dont like Vista!
Thanks for any help,

I have another problem. When I use the other link supplied by Jeka-IL to the Toshiba website concerning an AHCI driver, and I went to Device Manager to find out which chipset I had the result was nothing like the example given by Toshiba. What I saw was as follows:
IDE ATA/ATAPI controllers
IDE Channel
IDE Channel
IDE Channel
Ricoh Memory Stick Controller
Ricoh SD/MMC Host Controller
Ricoh xD Picture Card Controller
Standard Dual Channel PC IDE Controller
Standard Dual Channel PC IDE Controller
IEEE 1394 Bus host contollers
Etc
etc
The processor is an AMD Turion 64 x 2 Mobile Technology TL-60 2.00 GHz
This I am sure is a processor that could operate 64bit but is currently operating Vista 32bit

Re: Equium A210-1C4 - ATI CCC doesn't open on Vista

Recently I have been unable to open the ATI Catalyst Control Centre on my Toshiba Equium A210-1C4 notebook. When I click the CCC icon on the start menu the tray icon opens but when I right click it and choose Catalyst Control Centre nothing happens but the tray icon is still there.
I was having a similar problem a while ago but instead of doing nothing the splash screen appeared and then Vista displayed the message 'ATI CCC has stopped working'.
Any ideas?

Hey,
If Catalyst Control Center wont open it could be something wrong with display driver I would recommend reinstalling the display driver from official Toshiba website:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Just search for your notebook model and download the newest version. Before you install it, remove the old one firstly and restart your notebook. Then install the downloaded version.
Does this work for you?

Re: Equium A210-1AS - Blue screen and can't start it

My computer was working fine, i shut it down, the next time i start up it shows the windows loading screen, then for a second a blue screen flashes by, it restarts and repeats, i shut it down and started tapping F8 untill the advanced boot options comes up, safemode ect... none of them work and all lead to the blue screen, if i select the repair option at the top "Repair Your Computer" it begins to load with a vista background and cursor and then shows the error "The installed program cannot start. click OK to turn off the computer."
in Advanced Boot Options i try "Disable automatic restart on system failure" and the blue screen stays up so i can see it, it shows a usual blue screen error, reading:
UNMOUNTABLE_BOOT_VOLUME
STOP: 0X000000ED (0X85DDA600, 0XC000009C, 0X0000000, 0X0000000)
I do not have a recovery CD as i believe there is a recovery partition, but i don't know how to access this-
I am using Equium A210-1AS
Part Number : PSAFJE-005005KS
Windows vista 32bit
Thanks,
I know know the recovery partition is accessed theough "Repare your computer" but just shows "The installed program cannot start. click OK to turn off the computer." :/
null

Hello
In my opinion the case is clear: If you cant start the HDDrecovery feature (btw, its not a recovery partition!!!) using Repair my Computer option, you need the Toshiba recovery disk to reinstall it and get factory settings back.
Im wondering that you dont have a recovery disk. You didnt create it? So you didnt read the user manual but this should always be done before you do something with computers.
Anyway, you can order a new recovery disk here:
https://backupmedia.toshiba.eu/landing.aspx

Equium A210 - Diskpart Error during recovery

Hi,
I am trying to recover an Equium A210 back to factory state. I run the recovery utility and select the default settings. I get a diskpart error and the recovery process stops. This i what it shows:
Try to remove all letters from potential partitions on HDD 0 ...
Try to remove all letters from potential partitions on HDD 1 ...
Microsoft DiskPart version 6.0.6000
Copyright (C) 1999-2007 Microsoft Corporation.
On computer: MINWINPC
Disk 0 is noe the selected disk.
DiskPart succeded in cleaning the disk.
DiskPart encountered an unexpected error.
Check the system event log for more information on the failure.
ERROR: DiskPart failed!
Press any key to continue . . .
How can i check the system event log when I have no way of looking at it as the HDD has no operating system now.
Any help & advice would be great ,

Could be that the HDD has some errors and diskpart can't overcome them so I would suggest the use of a live CD as Ubuntu to format the HDD and than retry whit the installation.
PS: If Linux is too much of effort you ca try with a Vista or XP disc to only whipe your drive but you will encounter the same problem (but if you already have is worth a try)

Equium A210-1C4: Winload.exe problem after using product recovery disk

Hi There
I Could really do with some help here. I have a Toshiba Equium A210-1C4 Laptop. Partitioned drive with Vista home premium service pack 4.0.
Last night I used the product recovery disk supllied with the laptop to try and restore it back to its factory settings.
and the end of the process I'm left with a cmd prompt box with X:\windows\system32\cmd.exe in the blue top bit stating:
Error: imageX could not apply vista F:\05993xsp.swm Index 2 from ODD to C:\!
Press any key to continue. That box dissappears then another one with Administrator: X:\windows\system32\cmd.exe in the blue top bit stating:
waiting for ODD to become available...
ODD Drive F: ready.
check for medium in drive F:...
Failed to initialise the raid class.
No RAID - continue normally...
X:\windows\system32>
Now whenever the laptop tries to restart it just comes up with the error message:
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE
CAUSE
FILE: \WINDOWS\SYSTEM32\WINLOAD.EXE
STATUS: 0XC000000E
INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
IS MISSING OR CORRUPT
Below I then have the option to esc or continue both with the same outcome of system trying to restart.
The recovery disk has no repair option on it.
please help, I haven't a clue.
thanks

Hi
It looks like something went wrong during the Recovery procedure.
Did you try to recover the notebook once again?
If not you should definitely try this!
You are right; the recovery disk hasnt a option for repair because the recovery disk is not the same like a MS Vista disk. The Recovery disk contains the image files (its a package) and the files contains the Vista, Toshiba drivers, tools and additional software.
Therefore if something went wring during the recovery procedure, you will be not able to repair the OS installation but you have to run it again.

Equium A210 - After BIOS update the DVD drive stopped working

hi, since I have updated my BIOS recently, my DVD drive has stopped working on my Equium A210-1AS with Vista 32bit.
I have tried Microsoft fixme program that does not work, upper and lower registry is not there ether in regedit.
Has anyone got any solutions to get DVD drive working again?
Thank you

The CD/DVD was working fine before I was prompted by Toshiba tempro to update my BIOS, since then my CD/DVD drive doesnt work.
Have tried fixme from Microsoft that doesnt work, have tried to delete upper/lower filters they are not there, have unistalled CD drive and restarted the drive re-installs and still does not reconise any CD/DVD to boot up and DVD drive disapears some times
Any suggestions?
Thanks

Equium A210-171 - Vista Resume Failure

Similar Messages

Maybe you are looking for