Equium A60-692 - Can't open start menu and keyboard issue

I have a problem when starting my laptop A60-692 and I am not near any service points.
When I push the power button the screen goes through its start up routine gives it's welcome fanfare loads up my desktop.
But when I click on the start the start window only flashes up for a split sec and doesn't stay up. If I press the windows key on the keyboard I can then click on the start and the start window will appear and stay on the screen.
However if I open a program such as note book or internet explorer, the keyboard will not respond and only gives out a cowbell sound when I operate the keyboard. If I click start then shut down and click restart the laptop will shut down and restart then everything works fine!
It's all very annoying and time consuming. I'struggled with this for a long time, although it was not like this when new.
Anybody had the same problem or have any advice to give?
I would be extremely thankful!
Regards
Andrew

Thanks for you input. I have never had a problem with the keyboard once I have carried out a restart.
I have the problem when I first start and the first boot the key board will not type.
It will bring up windows such as "help" window when I hit the H key or "tools" window when I hit the T key.
If I now restart the laptop will shut down and reboot and everything will work perfectly!
But its such a pain the extra time it takes. this problem has been with me for sometime and I thought that installing the recovery disc that it might get rid of it, but no.
I arried out a hardware test on the keyboard today and it says that it is working fine.
I will look at the Bios and see if they appear O.K.
I will be away for acouple of weeks so it might be sometime before I can get back with any thing further about this

Similar Messages

Can't open start menu or search on build 10061

This seems to happen after each build update, and it is usually fixed by the app-cache repair
Get-appxpackage -all *shellexperience* -packagetype bundle |% {add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “\appxmetadata\appxbundlemanifest.xml”)}
However that isn't working this time.
In event viewer I'm seeing these type of errors appear each time I try to open the start menu
"Activation of app Microsoft.Cortana_8wekyb3d8bbwe!CortanaUI failed with error: The operation was blocked by parental controls. See the Microsoft-Windows-TWinUI/Operational log for additional information."
and
"Unable to start a DCOM Server: CortanaUI as Unavailable/Unavailable. The error: "346" Happened while starting this command:
"C:\Program Files\WindowsApps\Microsoft.Cortana_1.4.3.156_x64__8wekyb3d8bbwe\SearchUI.exe" -ServerName:CortanaUI.AppXwbw90g5vtrwjvhq9gjet3rhd0cy7ctte.mca"
I do use family safety, however the account I am logged on with is a local admin and is a parent account that is not monitored by family safety.
Another example, if I try to launch the Spartan browser, it flashes up briefly then closes. The TwinUI/Operational log give the "blocked by parental controls" error, followed by an Informational entry saying
"Activation of app Microsoft.Windows.Spartan_cw5n1h2txyewy!Microsoft.Spartan.Spartan attempted. Execution state: Attempted activation of the app, 7, The operation completed successfully.."
Any thoughts or suggestions?

Unfortunately, this happens in spells when someone has never used family safety. Nuking from space (refreshing PC) is not the answer I'm seeking, that's for sure. I bet this one will be patched, or just made obsolete, by the expected new build around mid-week.
Update: In my case, which is the non-parental-control-caused version of this, it sure looks like it's tied to RAM usage, explaining the seeming randomness of it for me. Through trial and error, I've found that when hitting RAM usage
slightly higher than 70% (according to Task Manager's figure), the flakiness begins with all things Metro (Start itself, any Metro apps within Start, even the functionality of the clock on the tray) disappear about 1 second after being clicked. So, the workaround
for now is to keep RAM usage down. Due to RAM leakage over time, this means rebooting more than you otherwise might want.
Update 2: I think it's at least exacerbated by, if not caused by, not having a dedicated graphics card on the above system, which uses only Intel's onboard HD Graphics 3000. I say this because on a basically identical system--which in terms
of hardware is only different by the addition of a 1GB AMD graphics card--I'm unable to reproduce the problem. Both systems are Core i5-2500 with 8GB RAM.

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating me, can anyone help me?

I keep getting the start menu and various programmes opening when I use a series of keys when working in my accounting programme, I am not using the command key and is very frustrating, can anyone help me? I am working on a Mac OS X Version 10.6.8, just need to know if I can reprogram the keys to stop this happening?

Safari browser and menu shortcuts:
http://docs.info.apple.com/article.html?artnum=42951
Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
http://docs.info.apple.com/article.html?artnum=75459
Changing behavious of Function Keys:
http://support.apple.com/kb/HT3399?viewlocale=en_US
and more useful information on keyboard shortcuts here:
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
How to re-map individual keys:
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

Open start menu through java

Is there any way to open start menu through java application just like when we open start menu by pressing the windows key on the keyboard.
Waiting for urgent response
Thanx
Salman.

Hi Salman,
This is possible in 1.5 in a stright forward way. Following is the code
import java.awt.GraphicsDevice;
import java.awt.GraphicsEnvironment;
import java.awt.Robot;
import java.awt.event.KeyEvent;
public class WindowsStartOpener
public static void main(String[] argv)throws Exception
GraphicsDevice gd = GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
Robot robo = new Robot(gd);
robo.setAutoDelay(100);
robo.keyPress(KeyEvent.VK_WINDOWS);
robo.keyRelease(KeyEvent.VK_WINDOWS);
If you are using 1.4 version. You can try with the mouse event methods of Robo class.
It is not possible with the versions earlier than 1.4. In this case you can write a C/C++ program and use JNI to invoke it.
cheers,
Sundar Lal Ch

Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

HT201401 cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

Can't open store menu in itunes

can't open store menu in itunes

What happens when you try?
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

Can't open start page

Hello !
I have installed APEX 4.2.2 on CentOS 6.2 64 and can't open start page. Except of it I see empty page.
Could anybody explain this.
Thanks in advance Andrii.

Thanks for reply.
I have run
@apxldimg.sql /u01/app/oracle/product/11.2.0.3
as is written on http://www.snapdba.com/2013/04/installing-apex-4-2-and-configuring-embedded-plsql-gateway-epg/
and apex is running ok.
Andrii.

I can't open contact app and when i click on the mail, calendar, contact menu in setup, i go back to the main screen

I can't open contact app and when i click on the mail, calendar, contact in the setup menu, i go back to the main screen.
Anyone can solve this issue ?

Try reset ipad. Hold down Sleep and Home button for about 10 seconds until you see the Apple logo.

Why my iphone screen can not open the key and can not enter the menu

why my iphone screen can not open the key and can not enter the menu

Your issue is not clear - are you saying your phone is disabled and/or you forgot the passcode?
http://support.apple.com/kb/ht1212

I run mac os x 10.9.5 and i can't open apple store and mail application crush

i run mac os x 10.9.5 and i can't open apple store and mail application crush
any help??
thanks in advance

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to launch one of the problem apps. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Can't open Word, Excel and Powerpoint Preview apps

Hi guys i hope thats the right forum for that question... I've installed these apps and they worked a while, but since a week i cant open any of these apps. I tried reinstall but no change. Can anyone help me? Thanks in advance!

Hi Active_Copy,
How about the Carey Frisch suggestions?
http://answers.microsoft.com/en-us/insider/forum/insider_office-insider_word/this-app-cant-open-workaround/defcacc1-4890-45bc-a204-5f209a17c3e5
here is the steps from it:
Instructions
1. Open Notepad
2. Paste the following text into the blank doc
echo off
net stop clipsvc
if "%1"=="" (
echo ==== BACKING UP LOCAL LICENSES
move %windir%\serviceprofiles\localservice\appdata\local\microsoft\clipsvc\tokens.dat %windir%\serviceprofiles\localservice\appdata\local\microsoft\clipsvc\tokens.bak
if "%1"=="recover" (
echo ==== RECOVERING LICENSES FROM BACKUP
copy %windir%\serviceprofiles\localservice\appdata\local\microsoft\clipsvc\tokens.bak %windir%\serviceprofiles\localservice\appdata\local\microsoft\clipsvc\tokens.dat
net start clipsvc
3. Save the file (somewhere easy to find) as "activelic.bat" (note the .bat extension)
4. Execute the batch file from an administrator privileged command prompt. (right click Start button (window logo) | select ‘Command Prompt (Admin)’) - see screenshot for example
5. Go to the Start menu and uninstall the App exhibiting the behavior.
6. Go to the Gray Store and reacquire the App. Launch it and it should now open, reacquire a new, valid, license.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How Do I Change the Language of Start Menu and Modern Apps After I Installed Windows? Applying Language Pack only Localizes Traditional Applications?

Howdy,
I installed Windows 10 Technical Preview with original language settings for the US region.
No that I need my Windows localized to Espanol - Spanish.
I type "language' in Cortana, select Add language to this device and click Add a language on the Region & language.
Then I select added language and click Set as primary.
After the restart I see that while Windows Explorer is displayed in Spanish, Start menu is displayed in English (including app sections such as Explore Windows), as well as Modern apps that have retained their English names (such as Mail).
I even set the location to Spain in regional settings (although I didn't like the idea, as I want to browse the US market). To no avail.
How do I change the language of the Start menu and modern apps?
Thank you.
Well this is the world we live in And these are the hands we're given...

Okay, I ran the in-place upgrade and it worked!
What I did:
1. Downloaded and attached Espanol edition of Windows Setup ISO.
2. Started setup.exe from that ISO.
TIP: If need be, you can downgrade your installation of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview by changing two registry values, EditionID and ProductName. You may use the following registry file on Windows 10 Enterprise
Technical Preview:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
Import these settings into registry and start setup wizard from the Windows 10 Pro Technical Preview setup CD. Voila! Windows will offer upgrade of your current setup of Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview with
saving all your settings and applications!
The only thing that wasn't localized are the new app sections. I still see Explore Windows and Everyday apps. Probably, these UI strings haven't yet been translated.
Well this is the world we live in And these are the hands we're given...

TA21041 I can not open some folders and get not have permission to open the folder

I can not open some folders and recieve the message: you do not have permission to open this folder. how I can solve it?

Select that folder, choose Get Info from the File menu, and give yourself read access under Sharing & Permissions. This shouldn't be done on folders in system directories.
(66976)

QuickTime appends itself to start menu and shows recent files

Everytime I play a movie Quicktime adds itself to my start menu, and shows recent movies when the mouse is dragged over the icon (despite that I have chosen not to save recent movies in my preferences). Any suggestions to stop this? Thank you.

Hi John,
This issue is related to the programs package we installed.
• An installation package contains all of the information that the Windows Installer requires to install or uninstall an application or product and to run the setup user interface.
• The developer can specify installation context, and based on these properties, Windows Installer automatically redirects the values of folder properties and registrations to locations.
• The shortcut is added to the profile by these context
We could right click these file and could find out they are the shortcut mentioned above.
For more information about Windows Installer, please refer to the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd765197(v=vs.85).aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
hi Fangzhou
useful link
thanks a lot

Equium A60-692 - Can't open start menu and keyboard issue

Similar Messages

Maybe you are looking for