Equium A60 does not start after BIOS update

I have an Equium A60. After being caught with some very nasty malware and a trojan I made the disiccion to reformat the machine and reinstall the o.s..
All went well until I updated the bios. Machine crashed and now I cannot get it to reboot. Press the power button and the machine will start for 3-4 seconds and then shuts down.
I know this is due to the bios and want to know if there is any way that i can reset this back to it original settings?
thanks in advance for your help

Hi Rob.
The model of my laptop is EA60-152 / PSA67E.
Yes i did upgrade from the Toshiba website.
I should have never done this it was working after the reinstall of the o.s and so i should not have tried anything else(never fix something that aint broke).
The only place i have found for a new motherboard is Toshiba. But the price is nasty. Talk about what a fool am i.
Never mind though i keep on thinking that there may be an answer or a scrap one that i can rob a bios chip from. Other than that a very nice paperweight me thinks..!!!!
If i get an answer than i will post it here..

Similar Messages

Notebook does not start after BIOS Update crash

Hi all,
I just want to ask whether is a chance to reactivate my Satellite A300 after a BISO update crash without send it to the Toshiba service.
I downloaded the new BISO and started it from the Windows menu. After a few seconds my PC crashed and everything was frozen.
I switched off the PC.
Now when I press the power button to start the Notebook the monitor is black and I can hear a sound brrr, brrr, brrr from the CD-Rom drive.
Do you think it is possible to boot from a CD or something like that. Is it possible to reactivate my notebook?
Your help would be really appreciated!
Thanks a lot
Best regards,
Chotte

Sorry but if the BIOS chip is damaged there is no much you can do about it. You must contact authorized Toshiba service provider.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Satellite Pro L100 does not run after BIOS update

Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
What do I do?
The first thing that came to mind was to reset the BIOS.
One problem, I can't find the RTC battery or a jumper switch.

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

ThinkVantage Toolbox does not run after BIOS update

Lenovo ThinkVantage System Update Tool on my T410 ThinkPad (2518EWG) offered me download and installation of ThinkPad BIOS Update Utility US version 1.28-1.11.
Since then, whenever I try to run Lenovo ThinkVantage Toolbox I receive a message: „This version of Lenovo ThinkVantage Toolbox is not licensed to run on this system“.
I notice that the ThinkVantage Toolbox still shows the old BIOS No. 6IET49WW (1.09), while the updated BIOS is 6IET68WW (1.28).
Any comprehensible instruction how to solve the problem for a computer layman will be much appreciated. Thanks - Jan

I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

Aperture does not start after iphoto update

Hello,
It seems that recent update to iphoto made Paerture not to start.
At first attempt, Aperture opened the window, but never went into normal and beach ball was over the blank window, no functions worked.
After Force quit, it does not start at all:
From dock it just silently does not start and from Launch pad the error:
"The application "Aperture" can't be opened
-1712"
is displayed.
What could this be and how to make Aperture working again.
This is Mavericks, 2012 MacBook Pro, Hires.
Thanks a lot

Computer reboot solved the issue.
Aperture now sarts normally.

Mac Pro does not start after security update

Just updated my MBP (mid2011, OX ML) with the latest Security Update ; after reboot it does not start. I get the start screen with login and it keeps spinning? Any wisdom here? thx

Hi, Matholy.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Jason H.

Equium A60 does not start-up properly

Had this notebook for 2 years now and yesterday it just froze.
Control,Alt Delete wouldnt work so had to turn off using the power button. Tried to turn back on but just shuts down again after a few seconds. The blue light comes on around the button and then goes off.
Managed to get it started a couple of times but then just froze again. Any ideas?

Hi,
you said it shuts down itself? Is it working if you leave it a while and let it cool down? So maybe just the ventilation system is clobbed with dust and needs to be cleaned.
Did you installed some new software or bios updates or added some RAM? Regarding the RAM you can run memtest86 (www.memtest86.com) to check your memory on possible errors.
Would appreciate some feedback from you
Cheers

Satellite C660D-104 does not boot after BIOS update

Hello,
I installed the latest bios on my computer Satellite C660D-104 but it has not rebooted.
Where is the place to do a reset?
Under the ram I have no triple x or B499
I can not find, can you help me please?
Thanks,

BIOS update failed this means that ROM module (where the BIOS is stored) isnt flashed properly.
As far as I know such issue could be resolved by flashing the ROM module again using Toshiba BIOS crisis disk.
I guess Toshiba authorized service provider own such crisis disk and could reflash the ROM

Tecra A2: display brightness Fn F6+F7 does not work after BIOS update

Updated bios to 1.40 WIN at end of January. Since then F6 & F7 keys fail to increase or decrease screen brightness. Is this a coincidence or is the bios update the culprit!!??

Hi
Usually the BIOS update shouldn't have any bad influence on the Toshiba drivers and the OS performance.
There must be another reason for the FN key malfunction.
At first I would suggest to reinstall the common modules. Please check if it will help.

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Jdeveloper does not start after patch update

Hi all,
I just installed the latest patch for jdeveloper, and I am having a problem starting the IDE. The splash screen displays, and that is it. When I run jdev from console, I get a bunch of error messages -
java.lang.NoSuchMethodException: oracle.jdevimpl.vcs.generic.profile.ActionInfo.
addHelpTopicId(java.lang.String)
at java.lang.Class.getMethod(Class.java:1581)
at javax.ide.extension.DynamicHook.findMethod(Unknown Source)
at javax.ide.extension.DynamicHook.attachData(Unknown Source)
at oracle.jdevimpl.vcs.generic.esax.VCSHookHandler.attachData(VCSHookHan
dler.java:231)
at javax.ide.extension.DynamicHook.end(Unknown Source)
at javax.ide.extension.spi.SAXManifestParser$Handler.endElement(Unknown
Source)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPa
rser.java:1310)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
ngParser.java:328)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:295)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at javax.ide.extension.spi.SAXManifestParser.parse(Unknown Source)
at javax.ide.extension.ExtensionRegistry.loadExtension(Unknown Source)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtension(Extension
ManagerImpl.java:331)
at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
at javax.ide.extension.ExtensionRegistry.loadExtensions(Unknown Source)
at javax.ide.extension.ExtensionRegistry.initialize(Unknown Source)
at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
agerImpl.java:763)
at javax.ide.Service.getService(Unknown Source)
at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(Unknown So
urce)
at oracle.ide.ExtensionRegistry.getOracleRegistry(ExtensionRegistry.java
:81)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1049)
at oracle.ide.Ide.startup(Ide.java:674)
at oracle.ideimpl.Main.start(Main.java:49)
Any help pls ?
Thanks,
Kunle.

More discussion on this here -> http://forums.oracle.com/forums/thread.jspa?threadID=398360&tstart=0
The simple answer is that the SU4 update contains an extra jar which is not needed.
If you go to the jdev/extensions directory and rename oracle.jdeveloper.vcs.10.1.3.jar to oracle.jdeveloper.vcs.10.1.3.jar_old, then rename oracle.jdeveloper.vcs.10.1.3.jar.backup to oracle.jdeveloper.vcs.10.1.3.jar jdev will start correctly. A bug has been logged for this, and we will correct it as soon as possible.
Thanks,
Geoff

Tiger does not start after failed update

Hi,
I ran software update, to install updates for Tiger, 10.4.6. I got a prompt to shut the laptop down, and follow the instructions on startup of the laptop. I pressed the shut down button, I was then told by the instructions to hold down the power button until the white sleep indicator flashes, and the bar travels across the screen. I accidentally let go of the power button and it shut down halfway through the update (I cannot remember what the update was).
Now, when I press the power button, the screen stays blank (no flash or anything), no sounds are produced, but the sleep indicator stays at half brightness, until I force shut down the laptop again (holding down the power button).
How can I get this laptop to start up again normally?
Thanks,
George.

Hi George,
This sounds like a firmware update. Apple has a firmware restoration CD that you can make. What you do is download a disc image of the CD, burn it in another Mac, and then run it on your computer that's not working. The directions are kind of involved, so you might need to print them.
Also, pay special attention on the firmware download page to the section where it tells you which computers it's good for. I've linked to version 1.7, but there are other versions available, too, depending on which computer you have.
charlie

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Equium A60 does not start after BIOS update

Similar Messages

Maybe you are looking for