Equium A60 keeps restarting after ATI Graphics driver installation

I have installed ATI graphics driver from Toshiba, but when I restart the laptop, it won't boot up, keeps restarting just before surposed to go onto windows XP. Please help.

i have the same problem. It looks like graphic card stopped working in SVGA mode, it is possible to boot Windows by enabeling VGA mode or choosig save mode on F8 screen. Reinstalling drivers didn`t help. Even reinstalling Windows didn`t help:(
blue "screen of death" shows this
<...>
"The device driver got stuck in an infinitive loop. This usually indicates problem with the device itself of with the device driver programming incorrectly.
Pl.check <...> drivers updates.
Tech.Info
*** STOP: 0x000000EA (0x841C8508,0x8424D258,0xF7933CBC,0x00000001)
ati2dvag
begining dump<...>

Similar Messages

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds.

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself.

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
Please advise.
Thanks in advace.

Computer keeps restarting after installing windows 8

Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped

We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag.

FIM Sync service keeps restarting after being disabled

Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
What is starting this service? How can I stop so that it remains in the disabled state?
Thanks
J

Hi,
Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
I suggest you start the FIM Sync service again and stop it, then disable it.
You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
Stop the FIM Sync service and then disable it.
Here are two links, you can use as a reference:
http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

My iPhone 6 keep restarting after I open a few apps!!!!!

My iPhone 6 keep restarting after I open a few apps!!! Sometimes during a call

Hi kaiserleung,
Thank you for using Apple Support Communities.
Please see the information in the article below on troubleshooting this issue where your iPhone is unexpectedly restarting.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Cheers,
Alex H.

Why does the ATI Graphics Driver p6624y taking forever to install

my HP advisor suggested I install an ATI Graphics driver update ... p5524y ... so I am attempting to do so. It set a restore point, checked available disk space, connected and downloaded rather quickly ... but the INSTALL/APPLY is taking forever (been running in excess of 1 hour now with 0% showing on progress bar.

Hello KenBayPark,
Have you tried stopping the update and attempting to install again? It could of just been a glitch.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Iphone keep restarting after 60 seconds

I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it back to factory settings would be the next step:
Use iTunes to restore your iOS device to factory settings - Apple Support

Finder froze, restarted. Now keeps restarting after boot.

Hi!
The title pretty says it all.
Finder froze completly, and I forced a restart. After the restart it keeps restarting AFTER boot. By that I mean after getting into the desktop.
Any ideas?
Tried a few things my self, but it just keeps restarting..
Got a Mac mini, can the macbook somehow boot from that? I just need the data from the harddrive!

I could not find anything the direction I was going. OK, you can start from your DVD. What happens if you just click install? If you are able to install, then your would be installing Sno over Sno, as if doing an upgrade install, in an attempt to fix your Sno installation. In principle, your files, users, apps, and settings would not be affected. But,before trying this sort of install, you will need to resolve the issue of what sort of backup you have. Most importantly you may have important unbacked up files. If so, then you might be better off going to a data recovery specialist before trying to reinstall Sno over Sno.

My iphone 4 keeps restarting after i changed the battery

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.

I'm setting Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.
i get the message: "setup did not find a driver compatible with your current hardware or operating system., Setup will now exit."
i think it's having problems "Extracting setup.exe" - i get the message "Cannot create setup.exe" and "Cannot create data1.cab"
help!

You're welcome.
Thanks for the points.
10 points for your solution!

My Equium A60 doesnt bootup after Windows update

Hi.
I have an Equium A60 (PSA67E) around 1 year old. There have been number of problems with this one recently. Firstly there was the overheating problem. The machine would heat up and shuts off by itself without any warning. I tried many options by keeping the cooling ports clear but dint help at all.
Recently I have upgraded my bios to 1.90 version as suggested by Toshiba. I'm still to see overheating until now after bios upgrade.
The most annoying is the display driver which in this case is a ATI radeon mobility 7000 failing. This would cause the display to become oversized and the resolution is very low. It would go by itself when I restart the machine.
Last month I reformatted the machine using Toshiba recovery CD. All went smoothly until I switched on the automatic windows update. The first update comes and I install it and restart machine to let it function. It goes well. The second update comes is installed and as I proceed to restart to let the upgrades functional, it wont boot. The machine keeps on starting again and again without loading OS. The display is the typical Toshiba boot display with the yellow indicator (loader) on the screen and after a while a blue screen comes for a short while (I am unable to read what error message it says) and machine starts booting up again. What can be the problem?
I need to install windows XP SP2 and for that I need to go through updating Windows. What can be the remedy and what about the available display driver update. I tried it but it makes situation worse.
I have used the recovery CD at least 20 times as there is no other alternative. I tried starting in safe mode but din't work.

Hi Gaurav,
From your description of the problem there doesn't seem to be anything wrong with what you have done so far, but I would just like to clarify a few points.
1. After you install the system from the recovery CDs do you install/enable your anti-virus software ?
2. Are you using Windows Update in automatic mode or do you manually select the update process ?
I would recommend that you disable the automatic restart on error (Advanced tab in System properties) so that the system will not attempt to reboot when you get your blue screen error. This will let you see what the error is.
regards,

Equium A60 Blue Screen after updating to XP Home SP2

I have a Toshiba Equium A60-692. I have updated to XP SP2 and now get a blue screen on start up with the message that ATI driver ATI2DVG has gone into a continuous loop. The Microsoft error report says this is due to incompatable drivers, but I have the latest driver from Toshiba.
Anyone have any ideas?

HI Laura,
if it is important for you to install SP2 on your notebook you should try a complete new OS.
At first save your data on an external device (CD, DVD, USB-HDD, ...) and start the Toshiba recovery CD. But pay attention all data will be lost, also other partitions!!!
After the new fresh OS is ready, update your drivers, Tools and QFEs from Toshiba HP and install it!
I the end try the SP2 installation! Then it should run!
Bye Meier

Boot Camp Windows 7 Black Screen After Graphic Driver Installation

Hi,
I have MacBook air (2012 model i think). I tried to install windows 7 64 bit using bootcamp. On the first windows boot and before installing boot camp drivers windows was fine. After installing bootcamp drivers and windows restart the windows came up to a black screen and stuck forever. When I uninstall graphic driver (intel HD 4000), windows is good again. Tried to reinstall different graphic drivers versions - didn't work. searched internet everywhere and didn't find any solution.
please help!

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

Mac Mini Late 2011 keeps restarting after shutdown.

Hi, I had my Mac Mini Late 2011 installed with Mountain Lion yesterday (25 July 2012). The installation was successful but I cannot shut it down.
When I shutdown, the system goes down and the display goes black, but after 3 seconds it starts up again showing the message that the Mac is restarting because there was a problem and ask me to push a key on keyboard to continue or wait for 40 seconds and the system will automatically continue.
This happens repeatedly. It does not shutdown.
So I decide to do the clean install the Mountain Lion but it does not solve the problem.
Please help.
Supong

I have my problem solved now.
My case, the Mac Mini mid 2011 and the Mountain Lion. I tried clean install the ML with no migration but this did not solve the problem.
"evanluke" posted in another thread (thread no.19044865 https://discussions.apple.com/message/19044865?tstart=0#19044865?tstart=0 ) that when he read the system report, it showed system panic event related to graphic driver. He is using the Mac Pro so it is not difficult for him to remove the relevant hardware.
But for me, the Mini, I have to wait for the mercy from Apple.
So, I tried changing my monitor from HDMI to VGA using the DVI to VGA cable connecting to another monitor port.
The display was ok though I could not set proper resolution. Then I switched back to HDMI, ** leaving the DVI connect to VGA monitor **, then shut Mini down. it went down properly with no self-restarting.
I started up the Mini and shut it don again and again, no restart happened.
I want to know what if I remove the VGA connection, it did self-restart again.
Reconnecting the VGA, no self-reboot.
I must leave DVI to VGA connect to both end to stop self-reboot problem until Apple realize the problem and post the update.

Equium A60 keeps restarting after ATI Graphics driver installation

Similar Messages

Maybe you are looking for