Equium A60 very slow with Windows XP SP 2

This Toshiba unit boots very very slow it takes ages to getit booted yes got a software firewall installed but it can't be correct that it takes really ages to boot a laptop like this one. I have searced here for some updates but I have not really found anything. Is there any known issue with windows xp and sp 2 for this laptop?
Do you have any adviecs?
Regards
Matts

The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
sorry for my english guys
[Edited by: admin]

Similar Messages

  • Coveflow very slow with Windows Vista

    Salut à tous
    Avant je n'ai jamais eu de probleme avec Itunes mais après un formatage et avoir remis mes chansons, les coveflows étaient rapide.
    Mais maintenant c'est lent pourtant mon pc est très puissant donc ca ne peux pas venir de la
    que faire ?
    Hello everybody
    Before I never had problem with Itunes and coverflow had perfect but after a formatting and to have given my songs, the coveflows are very slow
    my PC is very powerful and that cannot come from
    what to make?
    hanks

    The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
    Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
    sorry for my english guys
    [Edited by: admin]

  • HP LaserJet P1006 Print very slow with Windows 8.1

    I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I downloaded the Windows 8.1 Driver for the printer.
    But this time, first I tried to remove the software but it didn't work; the printer still show up on the control panel - Devices and Printers. then some how I was able to reinstall the software , after that the printer is working but printing very slow even it is a LaserJet printer.
    Please any one can help with that?
    Thanks;
    Waleed;

    Hey @wmowafi,
    Welcome to the HP Support Forums!
    I understand that you're experiencing a slow printing issue on Windows 8.1 when printing to your HP Laserjet P1006 Printer. I would like to work with you today at resolving this issue. Now the only driver available for your product on Windows 8.1 is a hostbased plug and play basic generic driver. Therefore, there is limitations for what can be done for troubleshooting. As you stated, you have already attempted an uninstalled and reinstalled of the driver to no avail. I'm going to suggest some further steps and tools to resolve this issue for you.
    Step 1: Uninstall Your Printer:
    Disconnect your USB cable
    Click the following link: Fix problems that programs cannot be installed or uninstalled to access the Microsoft Uninstall Tool.
    Once the website opens, select Run Now on the right hand side
    Allow the Tool to run.
    When prompted choose Uninstall
    A list of programs should populate and you're looking for the Laserjet. It may appear as LJ P1000 series. Please select the Laserjet series and Uninstall it.
    If the Laserjet doesn't show in the list of programs than your Windows 8.1 computer does not see the Laserjet driver as properly installed.
    Step 2: Clear the Temp Files:
    Launch your Start screen by right clicking on the Windows icon on the bottom left of your screen or by select the Windows button on your keyboard located to the right of the Ctrl button.
    Once the Start screen launches, type the word Run
    Click on Run to launch it
    In the Run box type %temp% and select OK
    Once the Temp folder opens, hold down Ctrl + A at the same time on your keyboard and everything will highlight in the folder. Select 'Delete' on your keyboard. Don't worry, no files or folders on your actual computer will be removed during this process. If a file is still be used on your computer you will get a pop up to 'skip' the file
    Once the Temp folder is emptied of its files, close the window
    On your Desktop, right click on the Recycling Bin and left click on 'Empty Recycling Bin'
    Restart you computer
    Step 3: Reinstall the Laserjet P1006:
    Please keep your USB cable disconnected
    Click on the following link: HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    The driver page for your product will now launch
    Select Download and allow the download to Run
    Once the download is complete an extraction will automatically run and once completed the installer will launch
    Run through the step-by-step on screen instructions.
    Please do not plug in your USB cable until prompted
    Ensure that your USB cable is plugged in from the rear of the printer directly to the computer. Avoid extenders or docking stations as they can cause printing and communication issues.
    Test printing!
    Please let me know if the steps I've provided resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Java 2D very slow with Windows XP

    Hi all!
    I'm writing an isometric game engine using Java 2D API, in full-screen exclusive mode and using all the advantages of the new VolatileImage class. The engine is almost finished, I'm testing it putting some animated players on screen and showing the frame rate of the engine. Everything went right, frame rate was very high in Linux and Windows 98/Me. But when I try to run the engine on Windows XP I can only get 5 or 6 fps!!!! And I don't know why!! It seems that XP makes Java run very slow... at least when using Java2D...
    Please, anyone knows why the performance is reduced??? Is there a new JRE release for Windows XP?? I'm using JDK 1.4.1.
    Thanks for your help.

    If you're using the Fullscreen API, then you're using BufferStrategy, thus you shouldn't use VolatileImages, it does this for you in the background. You shouldn't create any buffers, simply use the one provided. I'm assuming your problem probably lies in transparency. I've made an isometric engine using the fullscreen API that has run with complete 60fps page flipping. I would assume your bottle-neck lies in:
    Transparencys (These are very slow, there is a way to make a bitmask, much like you'd do in DirectX)
    Dynamic Memory allocation/Alpha rendering in your animation loop. (You need to allocate ALL of the colors you're going to use, and avoid using an alpha component if you want to avoid the VM getting bogged down by the garbage collector because you're allocating 30 Color objects a second).
    I made a Color object that was some what hacked together that has methods to allow you to access it's values for doing this kind of thing, allocating your scheme before hand is an easier approach.
    The method that performs the page flipping is a BLOCKING method, so you should orient your drawing before it, and not assume it's simply placing a request, like repaint does.
    -Jason Thomas.

  • SAP Client is very slow with windows 8 Pro 64 bit

    Dear All,
    I'm currently using Win8 Pro 64bit OS and SAP 7.30 PL3 am facing a slow performance compared to my old Win 7 system with 7.20,
    Actually i upgraded one of my users OS with Win8 ( previously it was Win7 32 bit ) after that SAP started giving issues i tried 7.20 with PL 14 and 7.30 with PL 3 but both are hanging while the time of login...... means  after entering my credentials it will take more than one min for loading my data. In the same time other windows 7 systems with 7.20 pl 10 is taking maximum of 2 sec for loading the data, using the same credentials.

    Hello Nikhil.
    Can you see here?
    MAIN MODULE INFORMATION:
       SAP GUI for Windows
       SAP Logon Pad for Windows
       730 Final Release
       7300.1.0.1074
       1337608
    SYSTEM INFORMATION:
       Operating system: Windows 8 Pro 6.2 (9200)
    You are using patch 0 for Windows 8
    Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
    Patch 7 or higher,.
    Apart from that the error is not from the GUI side,
    See below:
    Previous frontend interpretation time   :           109 ms
    Previous server response time           :          5078 ms (for 1 roundtrips)
    The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
    Please use a supported version for the OS you intend to use.
    You can find this information in note
    http://service.sap.com/sap/support/notes/66971
    Jude

  • Lenovo g780 is very slow with Windows 7

    Hello all forum users, please help me with my big problem.
    I have Lenovo g780 from 3 months. I`m really supprised, becouse i have the best version (model 20138) and for me is really slow. When i boot up it takes more like 5 min. Looking for wirless more like 3 min. I reinstalled windows and update all drivers from lenovo site but is still this same. Please help me somehow.
    Procesor: Intel(R) Core(TM) i7-3632QM CPU @ 2.20Ghz
    RAM 16 GB
    HD- 1TB

    Hi Anomus,
    I’m sorry to hear that the issue persists even after performing OSRI (Operating System Re-Install), this confirms that this might be hardware related. I would Strongly Suggest Calling Technical Support for Assistance to get the details of nearest Authorized Service Center to get the issue analyzed.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Equium L40 very slow and Windows Defender found a trojan

    Wondering if you could help me with a situation.
    Turned my laptop on and Windows Defender found a trojan so I selected delete all. Then it happened 5 mins later and I pressed delete all again.
    Later on my internet went incredibly slow and often freezing up.
    Opening files and folders often locked up but I could still click on the Red X although it took about 30 seconds to close it after I clicked the X.
    I am now getting random pop ups even when not on the internet.
    Do you have any suggestions?
    Thanks.

    Hi Pearlescent, in my opinion I suggest you to remove Virgin PCGuard because even though this is a legitimate program it does not provide excellent virus-scanning tools or protection. I recommend either AVG Antivirus Free, Avast! Home Edition or Avira Antivir. Any one of these antiviruses are a good choice and provide good protection for free. I would also recommend download Spybot! Search and Destroy for it is an excellent anti-spyware application and can be used alongside Ad-Aware. I use AVG Internet Security and it works wonders. Of course it is your choice and not mine to let you use these programs but it is just a tip. If you want to download one of these antiviruses, I suggest going to www.download.com

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • WebDav Very Slow on Windows 7 Pro

    Environment:
    Hosted SharePoint 2010
    Two laptops on a Windows Domain: 1) Windows 7 Pro 32-bit & IE11 and 2) Windows 7 Pro 64-bit & IE11.
    Problem:
    WebDAV is VERY slow on Windows 7 only. When using WebDAV on Windows 8 or using the web portal (browser), file uploads are very fast. We've performed extensive testing as follows with no success.
    Installed or confirmed SP1 was installed
    Disabled "Automatic Detect Settings" within Internet Options -> Connections -> LAN Settings.
    Forced port 443 within URL upon mapping a drive (ex. <URL>:443)
    Logged in using the local administrator's profile
    Detached computer from domain and used the local administrator's profile

    Hi Wleblanc,
    “WebDAV is VERY slow on Windows 7 only. When using WebDAV on Windows 8 or using the web portal (browser), file uploads are very fast.”
    Do you mean only the uploading operation in WebDAV of Windows 7 is slow or the whole WebDav performance is slow ?
    Please check this service ”Webclient” from the service control .
    I noticed that the process of creating a WebDAV connection is a little different in Windows 7 and Windows 8 .Someone indeed informed the information that this service will affect the WebDAV performance.
    Here are links for reference:
    Using Windows, how do I use WebDAV to upload files to my Oncourse Resources or Drop Box?(Pay attention to the creating  process)
    https://kb.iu.edu/d/araf
    How to speed up webdav in windows 7 solved for me(Pay attention to
    Ahmed Osman`s answer)
    https://groups.google.com/forum/#!topic/alfresco-technical-discussion/XF5HTouSnC0
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does
    not control these sites and has not tested any software or information found on these sites.
    Best regards

  • Very slow scrolling window thumbnails clips

    Very slow scrolling windows with thumbnail clips. The more files in the event, the worse it gets. It is very frustrating. Is in others it is the same? I have MacOookPro i7 early 2011, thunderbolt drives RAID0, 16GB memory, FCPX 10.0.7. After the hardware is decent.
    Give some feedback, thank you.
    P.S. I might add that this disadvantage are found from version 10.0.0.

    You might want to look at either booting from your install dvd (insert, restart and hold 'C' down) and running disk repair from Utilities. Alternatively, and I always suggest any Mac user should have at least one, a 3rd party disk utility like DiskWarrior (there are others) is extremely useful.

  • Imac  is very slow with downloading mail

    My imac is the ast weeks very slow with downlaoading mail.
    I am using mail 5.3 from apple
    Nothing has recently been chanched in my internet setting or internet speed
    Anybody an idea what can be wrong?

    Hi, I worked out what you recommended, but I do not see any difference at speed.
    Mail starts normal, though that is also somewhat slow,
    Before it has finished downloading mail (even is there os no mail!) it takes sometimes 2 minutes!
    Also there was no"boing"when starting up, with following your procedure, is it normal?

  • Facebook loading is very slow with nearly no images , i'm using mac

    facebook loading is very slow with nearly no images , i'm using mac os x 10.8

    i did it many times and the same problem exists

  • AE CS6 very slow with footage

    Hi guys,
    I am using AE Effects CS6 (11.0.4.2) on a new Macbook Pro with these specs:
    2.8 GHz Intel Core i5
    16 GB MHz DDR3
    Intel Iris 1536 MB
    The problem I am having is that when imported footage is visible as footage or a layer, AE becomes very slow with every click of the mouse on either the timeline or the footage in the viewer itself causing the color wheel to appear, often for 30 seconds at a time. Strangely, dealing with the composition has no issues.
    Any ideas guys?
    Thanks in advance

    Try transcoding the footage to a production codec and see if that makes a difference.
    Like, use the Adobe Media Encoder to make them something like QuickTime with the PhotoJPEG codec.
    See if that helps with the performance.

  • I installed yesterday iCloud , since the performance the system  is very slow with pinwheel at every clic

    I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
    What can I do?

    I would ask in the dedicated iCloud forum.  Good luck.  https://discussions.apple.com/community/icloud

  • Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

    The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
    I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,!  I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
    PLz tell me why! How to deal with it !

    Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Maybe you are looking for