Equium - Black screen and cant reboot with the recovery disc

I have a black screen and cant reboot with the recovery disc but I seem to be getting nowhere.
I find it strange I cant ask Toshiba direct about my problem but I have to wait for a kind hearted person to solve my problem or give me a helping hand

Of course you can ask Toshiba. Toshiba has Authorized service providers worldwide and I hope some of them are in your country too.
So please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download > Find an ASP and contact nearest service provider. Just explain the situation and I hope they will help you.
Back to your problem:
It is not easy to say why this happen. The whole issue is not described so well and I am missing some important points.
Maybe you have upgraded RAM and now notebook doesnt start properly. It is also possible that CPU is defective. It can be so many different reasons for this.
Best thing you can do is to contact service and ask for help. they can run diagnostic tools and find out quickly what the problem is.

Similar Messages

  • Iphone4 shows black screen and cant reboot with power n home button. need suggestions.

    i cant reboot or turn off iphone 4!  stays on black screen can hear phone use like saved alarms and received text messages  any thoughts on how to reboot phone or bring up home screen.  any suggestions would be appreciated.
    hlouie69

    See this Discussion
    https://discussions.apple.com/message/19521062

  • HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

    Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • I just loaded the 8.1 operating system on my iPad.  It has been sitting for about 4 hours with the black screen and white apple with the bar underneath.  What should I do?

    I am having trouble after loading the 8.1 operating system on my ipad.
    My iPad is model A1397 EMC 2424
    MEID ********
    Serial DL******JHH
    64GB
    I started loading 8.1 about 5 hours ago and it is still sitting with the black screen with the progress bar underneath.  It shows that it is almost done loading - just has a tiny bit of the progress bar left.
    <Edited by Host>

    I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything.  I thought I was doomed.  I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now.  I can't say I recommend this, but it worked for me.

  • All my downloaded(digital copy) movies will no longer play in itunes, i get a black screen, and no sound, but the time keeps going. how can i fix this?

    All my downloaded (digital copies from dvds) won't play in itunes. I get a black screen and no sound, but the time keeps moving. How do i fix this?

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • After errors with disk partition, I removed Windows from my iMac. Now when I start my computer it goes into a black screen and not straight into the Mac area like it used to, unless I hold Alt straight away to give me the option.  Any help?

    Hi,
    Sorry, I'm new to the community, so apologies if I'm repeating myself.
    OK, so I tried to install Windows Vista onto my iMac with the disk partition.  Everything was going fine and it wasn't until last minute, when it was installed that an error came up saying that this can only be done with Windows 7.  After this error, I couldn't access any errors of my iMac and when I shut down and restarted my computer, it automatically logged into Windows.
    So after a panic, I rang Apple Care and the lady helped me log into my apple area, delete Windows from my iMac, and all was restored.
    However, now when I shut down my computer and boot it back up, I think my iMac is trying to log into Windows areas that no longer exist.  It loads up a black screen and doesn't move from there.  To log into my Apple area, I have to do the whole process of holding Alt immediately after I switch the power on and access the Mac drive and log in that way.
    It's beginning to become a real pain and I'm paranoid this process is going to damage my computer.  Any advice on how to restore logging-in back to it's former glory when I first purchased it?
    Thanks

    Solved it.  Thank you very much for that!

  • MacBook Pro bought in August 2013 Black Screen and Can't See the Cursor

    I took the OSX update in the beginning of November and now when I lift up the lid of the notebook and press 'on' I get a black screen and can't even see the cursor.  I've tried pressing command + control + p + r.  I've also tried command + s.  Neither seems to fix this issue.  Are there any other suggestions to try?  Thanks in advance.

    Hi spartan220,
    If you are getting no video on your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My iPod has a black screen and when you press the power button nothing happens. Also when you plug it in the the computer or wall nothing happens.

    My iPod was plugged in over night. When I woke up in the morning it had a black screen and wouldn't turn on at all. Also it doesn't say that its charging when it's plugged in and when plugged into the computer nothing comes up like it did before.

    Reset it by holding the on/off and home buttons at the same time until you see the Apple logo (ignore the off slider if it appears first), then release.  You won't lose any data by doing this.

  • Black screen and no sound with iTunes rentals.

    I was going to chalk this up to just a corrupt download, but it's happening too much for mere coincidence now. I rented Captain America: The First Avenger in HD on my Windows 7 machine, only to find that when I tried to play it, I got nothing more than a black screen with no sound. I chalked it up to bad luck and went back to my day, only a few days later, I tried again, only to find the exact same problem had occurred with the exact same movie. I called Apple Support and told them of the problem, and while they refunded my purchases (and gave me 3 free movie rentals), they proposed no solution.
    So I tried renting Iron Man 3 today, and the same thing happened. This doesn't occur with any other movies that I own trying to play in iTunes, just with rentals. I've already tried a reinstall, which did nothing, and I'm out of ideas.
    Any assistance is appreciated.

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • IMac Black Screen, making some progress with the CAPS LOCK key...What???!!!

    Ok, super weird situation here. My friend brought me his iMac because when he turns it on, it makes the chime sound, the front light goes on, but the screen stays black.
    The first thing I tried (as a former pc user) whas to start pressing the CAPS LOCK ON and OFF to see if the computer froze at some point, but to my surprise, after hitting the CAPS LOCK many times the screen appeared.
    Ok, but the white screen with the gray apple was all distorted, the apple with be filled with little rainbow boxes and lines on the whole screen, so I thought, the Video converter might be bad.
    But then, when I tried for the third of fourth time, it appeared the same white scren with the gray apple and the progress circle spinning again, but this time it looked perfect, BUT it froze, and it just stayed there.
    Thats what I have so far......any ideas? I tried the Controlcommand+PR but it didnt do anything......
    Thanks

    It appears that the Mac is passing the Power On Start Test which results in the chime advising that the RAM seems OK. But there is something wrong with the boot volume. Try booting from the Install DVD that came with the Mac. In the Utilities menu of the Installer use Disk Utility to Repair Disk. In the left hand list choose the boot volume. On the right hand, in the First Aid pane press the Repair Disk button. Repeat until no repairs are reported.
    Dah•veed

  • Black screen and slow movement with Gnome and ati driver

    Greetings, I use ati driver free.... and Gnome... and gnome  sometimes works very slow and shows black screens... other days works fine...ideas?... i try installed catalyst-utils, but gdm dont start.
    Greetings and thanks.

    try to flash bios & graphic card drivers from the link below.
    http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=46

  • Why do I get a black screen and no sound with video in iTunes 8?

    Just downloaded the new iTunes. I don't have any video playback when I click preview in the store. No video when I try to play anything that I've already downloaded. The play cursor moves but I have a black screen with no sound. I'm hoping this is just a temporary glitch.
    Any recommendations? I'm using the latest version of Leopard 10.5.4 on an Intel iMac.
    PS: This same question is posted in iTunes download category too.
    Message was edited by: NowWhat!

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • MacBook Pro, about 4 years old. When I turn it on you get the apple screen; then a black screen; and nothing further. The pointer still points on the black screen, the column still goes up/ down. Any ideas? Alx

    Mac book pro about 4 years old. When you turn on you get the white apple start screen; then a black screen; then no further. On the black screen you can see the pointer, the pointer moves when asked, the pointer gets dark/light with the appropriate keys pressed. Tried turning on/off; also with shift key pressed. But only darkness. Alxat

    Hi there Alxat,
    You may find the troubleshooting steps in the article below helpful.
    Mac OS X: Gray screen appears during startup
    https://support.apple.com/kb/TS2570
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/ht1199
    -Griff W. 

  • When I turn on my Macbook pro retina display i get a black screen and i noticed that the machine gets very hot, any clue how to make it work?

    When I turn on my Macbook pro retina display, a black screen show up while I hear the normal start up sound.  I noticed that the machine gets very hot, any clue how to make it work?

    If the Mac is too hot to touch, take it in for service.
    Apple - Find Locations

  • My PC crashed and it wont work even with the recovery disc

    pavilion a1520e 
    windows vista 32-bit  
    it just stop working i order the recovery disk and still wont work 
    parts#   5092-5959 vista home premium 71NAv3PcA3+
                  5070-3830 vista home premium-base 
                  5070-4193 CTO-Vista Business Supplemental 

    alex103 wrote: pavilion a1520e  windows vista 32-bit   it just stop working i order the recovery disk and still wont work  parts#   5092-5959 vista home premium 71NAv3PcA3+   5070-3830 vista home premium-base    5070-4193 CTO-Vista Business Supplemental 
    Hello alex103, You might try to boot the system and press the key to run the hardware diagnostic test and see if you can confirm a hardware failure.
    My suspicion is the hard drive may have failed.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

Maybe you are looking for

  • Dynamically create Value Objects from XML file

    Hi I want to create a value object from Xml file dynamically,like in the xml file i have the name of the variable and the datatype of the variable.is it possible do that,if so how.

  • Why is my picture library in finder different than in IPhoto

    i want to drag my picture library in finder to an external drive.  But when i compare the pictures in finder it does not have all of the folders i have set up in iphoto

  • Calling a method in Runnable Class

    Hello I am trying to water this down but how can I call a method in my class If I am passed only thread t. MyClass mc = new MyClass(); Thread t = new Thread(mc); t.start(); //works because it is a method of Thread t.myMethodInMyClass (); // wont work

  • How to set a date string in a textbox which bind to a Date type datasource

    Hi, I found i can't set a default date value in a textbox which bind to a Date type datasource. Even i tried copying a date string which is picked by the calendar date picker and copy the exactly same string into my source code. It just doesn't work

  • Budget query variable error

    Experts, I have the follwing query, which works as long as I replace the variable with a data value. Just have not been able to determine what is wrong, the variable is to allow the user to select the name of the budget: SELECT     SUBSTRING(T1.Forma