Equium - HDD not recognized from Windows XP

I have replaced the HDD in this laptop because the original had a catastrophic faulure. I have replaced the HDD correctly (as far as I can see) but when I come to re-install Windows XP the HDD cannot be recognised.
Any ideas?

Hello Macius
Thanks for that, although I was also assured that my new 120 Gb IDE drive would work too, as it was under the 132 Gb limit.
So I was very interested to see if anyone had actually successfully swapped drives on this model, before spending more on what is a comparatively expensive new drive (byte for byte), compared to larger capacity ones.
The Bios offers no options at all, except to go back to the ancient basic IDE mode, which would be very slow I guess, and using software to reset the reported drive size didn't work either.
So I'm waiting until someone tells me they have personally tried something which really definitely works!
Thanks again.
Tyketronic

Similar Messages

  • External 1TB HDD not recognized from PS3

    Hi,
    I brought a 1TB external yesterday, got home loaded it up, went to plug it in the PS3 via the USB and my PS3 doesnt recognise it. I phoned the computer shop they said I had to format it, so I followed the instructions changing the settings to EXFAT and it still doesnt work.
    Can someone in english please help me?

    Hi djsi,
    Unfortunately I think its hard to say something because here its a Toshiba user to user forum and you should ask this in a PS3 forum for example.
    Nobody knows what PS3 and firmware you have and what kind of HDD you have.
    So just ask a PS3 expert or in PS3 forum. There you should get a proper answer. ;)

  • Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

    Out of warranty by a month!
    Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
    The touchscreen still works while the screen is black.
    System restarted after sleep mode I think.
    The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
    I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
    When on the external monitor the internal display is not even recognized by windows.
    When I boot in safe mode, the internal screen works fine with of course limited capability.
    I have reloaded display drivers from the support site.
    Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
    Anyone have any clues as to what my be going on? Hardware, driver etc???
    What information can I provide?
    Solved!
    Go to Solution.

    This is a pretty weird issue with conflicting observations.
    1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
    2) Display works on external monitor in regular mode. (So, not drivers issue)
    Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
    Could you re-open and check that all connections are good?
    Is the Wi-Fi card working well?
    I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • I need help, my ipod touch is not recognized by windows as a harddisk

    i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
    i would like to transfer the files from pc to my ipod touch without useing itunes.
    as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
    Message was edited by: B0Om

    B0Om wrote:
    ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
    Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
    how do i put programes and games in my ipod touch
    Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

  • Ipod not recognized by windows, itunes, and will not charge with pc.

    yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
    -1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
    -2nd, windows gave me a message saying the hardware could not be recognized.
    -3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
    i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • IPod not recognized by Windows / iTunes

    Hello,
    I hope someone here can help. So far my first experience with Apple support has NOT been a positive impression.
    I searched for info on this problem, but the other ones I see all seem to be related to freezing or battery issues.
    iPod Classic 120GB, I don't sync very often, and just finished doing a bunch of cleanup in iTunes (album artwork, song info, etc.) and want to re-sync the pod.
    When I connect to the PC with the USB cable, Windows doesn't seem to recognize the device, and it doesn't show up in iTunes.
    It is charging through USB, however. The battery is fully charged.
    I tried 3 different USB ports on the PC.
    Tried restarting iTunes.
    Tried restarting the computer.
    Went to Apple support website, tried the troubleshooting assistant:
    Reset the pod.
    *Had already tried different USB ports.
    *Had already trired restarting the PC (Although it mentions checking for the latest software updates - I didn't do this. WHAT software updates should I look for? Device drivers? OS updates? WHAT???)
    Re-installed iTunes. (Was already at v 9.2.1.4)
    *Did not try the restore. Reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
    Also read something about disk mode. I set the iPod to disk mode, but it's not recognized that way, either. When connected by USB in this mode, the iPod screen still says "OK to disconnect".
    I tried the link "iPhone, iPad, or iPod is not recognized by Windows".
    I do not see the "Apple Mobile Device USB Driver" anywhere in Device Manager. I suppose this is the problem.
    However, continuing with the instructions, it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC?????
    (These instructions also say to disconnect the device, but nowhere says when to connect it. Why do they put half-baked troubleshooting instructions on their web site???)
    Is there anyone from Apple support on this list who can help? I believe the driver needs to be reinstalled somehow, but it didn'thappen when i re-installed iTunes, so how do I do this?
    Thanks
    Keith

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • Ipod disabled & not recognized in windows 7 or itunes

    My son disabled his ipod touch 4th gen trying to get into it, he planned to give it to his cousin so I just removed the device from his Apple acnt. However, it's still disabled & now not recognized in Windows 7 or by I-Tunes on any computer or usb we try, but it does charge by usb or wall charger. I am not super familiar with Apple products & need some advice if anyone has any. Thanks!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Also try on another computer

  • HT1414 iphone not recognized in windows or itunes

    iphone not recognized in windows or itunes

    My iPhone 5 was not being recognized by two different computers, windows 7 and windows 8.1.  My wife's iphone 5 had no issues.  I followed all the advice on-line from re-installing iTunes, resetting my phone ( as new and backed up from cloud), device manager troubleshooting, re-install drivers, different cables, different ports.  Oddly enough in the fianl analysis my iPhone only gets recognized when the cable is insert in one way into the phone.  Flip the cable and it goes straight to "unknown device".  Doesn't matter which cable I use, it only works on one side.  My wife's works both ways.  I can't explain it, but there it is.  I put a dot with a permanent marker on the cable to identify which side goes up.

  • USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1

    My USB 3.0 - WD Passport 1 GB not recognized by Windows 8 and 8.1. There is no sound when I plug it on pc or some error message. But other USB devices works well. Maybe there is not suitable drivers for this device? Please Help me!

    Hi azeripatriot,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers.
    For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that when you connect your passport drive it does not auto install.  Does the power  light on the passport drive come on?  What is the error message you receive?
    Have you checked for any Windows updates?
    You can run The HP Support Assistant to help with resolving issues and looking for updates.
    If you believe it is a driver issue, you can download the software and drivers from the WD website. Here is the link WD download for passport drives.  If you  connect it to a different computer, does it install?  They also have a diagnostic tool for testing the drives.  Here is a link to their diagnostic tool .Western Digital Data Lifeguard diagnostics for Windows.
    If this has not alleviated the issue, would you please provide your exact model of computer and the operating system you are running. How Do I Find My Model Number or Product Number? 
    Would you also provide the exact error you get when connecting the passport.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Video ipod not recognized by windows at all

    My new video ipod suddenly cannot be recognized by Windows. I'm not really sure what happened - one day I was able to plug it in and have iTunes automatically start and sync, and now whenever I plug it in I just get the message "do not disconnect." Also, the iPod is not recognized by Windows - doesn't even show up in "My Computer," though it does show up in "Device Manager" and in the "Safely Remove Hardware" dialogue.
    What could be wrong? I already uninstalled iTunes and Quicktime and reinstalled them, to no luck. I also installed the new iPod system software 1.3 but also no luck. Finally, I uninstalled all of my USB ports and forced Windows to reinstall them, but that didn't work either. The first time I put in the iPod after that I got a dialogue box that it had recongized the new hardware and was installing the iPod, but nothing ever came of it.
    However, both iTunes and my video iPod are fully functional, and I have taken VERY good card of the video iPod.
    Any idea what could be wrong???

    I tried it, setting it to E. It didn't work. Tried the same thing after setting it to disk mode and it didn't work. Just the same old BS about "Do not disconnect," but it isn't recongized anywhere on the system except for Device Manager and the Disk Management tool you mentioned. No acknowledgement from iTunes or in My Computer. Meanwhile both iTunes and my iPod work fine, but they can't communicate with each other.
    I AM GOING INSANE!!!!!!!!!!!!!!!!!!!!! I have tried every trick in the book that I could possibly think of. Not only did I uninstall and reinstall iTunes, QuickTime and the iPod helper, but after I uninstalled them I COMPLETELY nuked them, eliminating every file and clearing extraneous references out of the registry. Then I reinstalled from the CD going by the instructions by the letter. I thought for sure it would work now but for some ridiculous reason it doesn't.
    I am completely at my wits' end.................. What the heck can I do???
    PS: I also have Linux installed in a secondary extended partition, which is on my hard drive but not counted as C. Not sure if that makes any difference.

  • Plays & lights work but NOT recognized by Windows/iTunes & won't charge

    It's a shuffle 512mb from a few months back and worked perfectly until last week. It continued to play as usual, but is no longer recognized when i plug it into ANY computer (i've tried about a half dozen)! I've followed every suggestion and recommendation from both the Apple Support and the discussion groups relating to my problem though it seems no one has experienced my specific ordeal. I am quite limited as it is not recognized by Windows. I tried searching for it as a "media device" but nothing. All the fucntions and lights work while playing, but there is absolutely no response when connected to a PC. When this charge goes, i'll be without my tunes!
    Any help...
    Thanks
    Shuffle 512mb   Windows XP Pro  

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

    My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

    Yes. I have the latest version intalled but this hasnt helped.
    I thought it could be to do with the Shuffle not having enough of a battery charge.
    So i plugged it into the wall charger and then tried this didnt work either.
    It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

  • Treo 700wx "Device Malfunctioned/not recognized by windows" error msg!

    Everytime i try to hook up my new treo for syncing via USB  it tells me that the device has malfuntioned or that it is not recognized by windows! i have reinstalled active sync multiple times i have changed settings in my treo and checked that all usb options are checked, ive looked for 0kb files and there are none, please someone help... additional info.. i used to have a motorola Q but i deleted that profile from my active sync still nothing, please help!
    Post relates to: Treo 700wx (Alltel)

    As i said i am new at all of this, when you say "check under device manager and see if the driver has a bang on it it" what do you mean and where can i find this? tried a soft reset still nothing, not ready to do a hard reset because i do not want to lose all of my information i have on the phone currently. Checked that my pc firewall does allow actve sync access
    Post relates to: Treo 700wx (Alltel)
    Message Edited by Jburm on 07-08-2008 08:12 PM
    Message Edited by Jburm on 07-08-2008 08:16 PM

  • Frozen appple on LCD and not recognized by windows (Device Malfunction)

    All songs totally erased from my Ipod a few weeks back. When I tried to syncronize my computer now says that the device is malfunctioned and windows does not recognize it. Now the Ipod has a frozen apple on the LCD that I cannot turn off or anything.

    The usual things to try here would be to reset the iPod and restore the iPod.
    There are troubleshooting steps listed here.
    iPod not recognized by Windows.

Maybe you are looking for