Equium L10-273 and wireless card

I have got a Toshiba Wireless LAN Mini PCI Card - 802.11b/g (PA3363E-1MPC) and have placed it into the laptop, do i need to connect up the black and white wire (which are not free and connected to the main board) or is that routed to the card in the main board.

Hi
Well, as far as I know the cables are loose if the unit is wireless compatible and if its possible to upgrade the notebook with wireless card. I found some informations about this unit and it says Wireless is not enabled on this unit.
http://www.amazon.co.uk/exec/obidos/ASIN/B000AYANXK/202-3336533-0743812
http://www.pcworld.co.uk/martprd/store/pcw_page.jsp?BV_SessionID=@@@@1845528840.112894963 5@@@@&BV_EngineID=cceiaddflmhlhfjcflgceggdhhmdgmi. 0&page=Product&sku=074685&tabIndex=1
In this case Im not 100% sure but I dont think that its possible to upgrade your notebook with the Wireless card.
But if you want you can contact the Toshiba service partner to get more detailed informations about this case.
Bye

Similar Messages

  • Does Equium L10-273 have wireless?

    I have a Equium L10-273. It has a wireless Button on the front of it, a wireless indication light AND a sticker on the bottom saying Wireless LAN:without W/L
    i suppose my question is this:
    Does the Equium L10-273 have a built in wireless device? If so, How do i get it to work?

    I am pretty sure it must have WLAN on board. Please check entry in device manager or sticker at the bottom side. To get it work enable WLAN antenna using WLAN switch. When the WLAN LED is on use FN+F8 key combination and be sure the WLAN is enabled.
    Use Microsoft option to search all available WLANs in your area. If the favorite WLAN will be listed connect to it or configure the WLAN connection if necessary (WLAN password).

  • Need manuals for Equium L10-273

    Dose any one know were I can get a manual for my Equium l10-273 as have misplaced mine?
    Have searched this site but it gives no results.

    Hi
    Do you mean the user manual???
    This can be downloaded from the Toshiba European support homepage.
    Go simple to
    http://eu.computers.toshiba-europe.com -> Support & Download -> Toshiba User Manual
    You will need to search for the user manual for Equium L10

  • CQ56-115DX and wireless card

    Sorry I posted in the wrong forum.

    Hi,
    unfortunatly you can't use a wireless mini PCI card in this notebook model, because there are no antennas installed. According to my experiences with wireless cards the best way is to use a WLAN PC card. They are very easy to install and don't cause so many problems like other cards.
    Bye

  • Equium L10-273 - power charger replacement

    Hi,
    after 2 1/2 years of relatively good service, my charger for my L10-273 died and went to heaven. I have had a couple of universal chargers since but the bit that connects the adaptor for various makes of laptops to the bit that powers up is made of 2 pins that constantly seem to break. Can anyone recommend a place where I can get a replacement charger for less than 30 and isn't held together by two thin bits of metal?
    This is the one I got:
    http://www.maplin.co.uk/Module.aspx?ModuleNo=217916&&source=14&doy=28m2

    Hi Nishal
    To be honest I would not take an 3rd party AC adaptor.
    Fact is that a not fully compatible AC adaptor could cause some serious notebook troubles.
    So in your case it would be advisable to ask the local ASP for a new, compatible part.
    I think the original Toshiba AC adaptor is not expensive too and you will be always on the safe side.
    Bye

  • Lenovo g570 and wireless card problems

    Ello folks,
    I recently bought a Lenovo g570 Notebook, started using it all went fine recently i even upgraded my windows 7 to windows 8 x 64 and everything was swell. At some point my wireless connection was working fine but then BAM my wireless connection dissappeared from the list of connections. I must say that i had the same problem with the previous windows 7. Figured that the broadcast from the router was the problem but it turned out it wasn't sooo i'm assuming it's some kind of setting from the laptop because all other wireless using tech from home can see that particular network, all except the lenovo notebook.
    Any help would be appreciated. I must say that i recently updated every driver to the latest after deinstalling the previous ones, without any result..... It's driving me nuts ....

    hi mikydutza34,
    Welcome to the Lenovo Forums.
    If you upgraded to WIndows 8 Pro, check these article as it's similar to your problem.
    Wireless unable to switch on in Windows 8
    Wireless card enabled but not connected after Win 8 Pro was installed
    Let me know your findings,
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Equium L10-273 - installing internal wireless card

    Hi all
    I have been attempting to install an internal wireless network card on the above laptop, which we have acquired 2nd hand.
    There is a slot to take the card, which has gone in, but I can't seem to locate cables to attach to it.
    Any technical bright sparks around who can possibly help me with this? Or perhaps explain why I can't find the cables - surely there wouldn't be a slot to take a card if there weren't cables to connect it?
    Grateful for any help!
    Many thanks

    yes, there are some versions of l10 which dont have wireless cables attached to them.
    I have noticed that all new lcd back covers (black cover with toshiba logo) do have cables attached to them.
    If you want to take the laptop apart yourself then it is possible to get wireless on this if you can obtain a back cover with wireless cables on it.

  • I need a wireless option for older Mac desktop is there a good card or adapter  I want to transfer hd video files over the internet.  using a hotspot and wireless card in computer, any recommendations

    Is there a good card I can put in the computer, and use with a hotspot?  Any experience with uploading HD video files this way.  DSL hard wired connection is too slow

    As for the people on eBay, my only beef with them is that it has turned into a money hungry store instead of an auction place to pick things up inexpensively, like it used to be.
    Agreed.
    There is one, in particular, who really puts a dear price on his flashed cards.
    Not a friend to the Mac community.
    Of course, others see his prices, and say "Well, if he can, then so can I".....
    By the way, I have been noticing the same cards, only for PC for around $30-$40, which lead me to believe that those are the ones they are "flashing". Sorry if that's incorrect.
    It's OK.
    I watch for the prime cards all the time.
    Radeon 9800 Pro and XT PC cards have increased to the $50-$70 range.
    Pros used to be $20-$30, XTs $30-$60.
    Some guys here in Japan are trying to get $100 for Radeon 9800 Pro cards- vanilla PC versions.
    The glut in Mac options has inflated the flashable PC card market dramatically.....
    The Mac Edition Pro retailed for $200+.
    $100 isn't bad for that card flashed to Mac... the XT gets $20-$50 more.
    Try telling a PC guy that a Radeon 9800 is a $100 card..... the old boys laugh!
    Adding to this is the recent influx of "new" Mac users, PC modders/users buying cheap, used G4's, and the demand for upgrades has increased as supply decreased.
    If you see any rev 5.70 Geforce 7800 GS AGP cards, or any FireGl (Radeon) X800XT (unflashed) cards for less than $130, amazing is all that I have to say.
    $30-$40, and I'll take 20 of each- cash!
    Hmm, same goes for Geforce 6800 Ultra's......
    I am just a little (or a lot) frustrated with Apple and Apple vendors lately. For obvious and not so obvious reasons. Please accept my apologies as I go through this phase.
    We all have our days, and our reasons. At least, I know I do......
    Apology warmly accepted!
    Count me as frustrated, as well.
    The new machines sure look nice, but when I tally up the price of the software that I own, which can't be run on Intel or 10.6x Macs, my room full of G4's look a lot nicer.

  • Equium L10-273 - T&L errors

    I have been trying to play a game on my laptop but it comes up with T&L error, I know what the problem is the Intel 82852/55 graphics controller.
    Can I fix this, is there a T&L update, can I replace all or part of the onboard graphics controller can I bypass the controller with a different card?
    There must be some way of getting past this without spending loads of money on a new board or new laptop.
    Thanks

    According to this page:
    http://www.intel.com/support/graphics/sb/CS-011910.htm
    It is not possible to run hardware T&L.
    But, if you can wait, there will be an external method to use normal graphic cards with notebooks. Check google for Asus XG station.

  • Equium L10-273: speaker/volume icon disappeared

    Hi
    The little volume/speaker icon thats usually on the taskbar has disappeared. ive tried changing the settings in the control panel but it doesnt make any difference. im not sure what happened to make it disappear!! any suggestions?

    Strange however, you could use also the system restore tool to roll back the OS to the early time point.
    Maybe this procedure will bring back the sound icon.
    But is the sound icon important for you?
    In my opinion its a easy way to change the sound properties but I could also live without this icon in the taskbar

  • Been losing connection for magic mouse and wireless keyboard

    When I have my MBP running Mavericks in clamshell mode, I lose connections to both magic mouse and apple wireless keyboard in clamshell mode. I've tried all the PRAM SCM, aluminum foil and paper tricks. What I then did was test what happens when I leave the MBP open rather than in clamshell mode and it appears to avoid losing connection, at least that is what I've concluded with Mavericks for now..... anyone else able to replicate this? Having to leave the MBP open is not ideal.

    Barry, thanks, still not working.  I've tried every thing I can think of or have read, what I'm concluding is that there is either a problem with Mavericks or something has changed on how bluetooth works in Mavericks. Did not have this problem for the last 4 years. I can reproduce the problem when I close the laptop. I had the Bluetooth and wireless card checked out and replaced about 3 weeks ago. Problem has continued.

  • How to change wireless card locale?

    I'm unable to connect to router, which is set to channel 12 or 13. So I start googling and I found out that in the US and Canada, approved channels are 1-11 but in Europe it is 1-13.
    I check my wlan adapter on MB Air and wireless card locale is set to USA!
    Is it possible to change wireless card locale to Worldwide?
    Thanks, David

    The location on your Mac should be set by the same time zone used for the Mac's clock. (you don't say where in the world you are)
    You have to log into your router to change the country/ area channel for the router.

  • KT4AV hates Wireless Card. NewB Help

    Hey all. My computer runs to perfection up until I install a wireless network card (D-LINK G520 rev.b). After installation I can get an "excellent" connection to my wireless network but my computer runs like heck and locks up constantly. Sometimes everything runs smoothly. But the instant I run too many programs or download something... I'm asking for it. It's as if I can see the network activity in my mouse movements (i.e. mouse pointer jumps as network connection jumps).
    My computer is a good 25-30 feet from the wireless router so I don't want to thread any ethernet cord over.
    Any insight?? I would really appreciate the help as I'm about to bash my head in with computers (My other computer's motherboard is out on RMA).
    here are my computer details to the best of my knowledge:
    KT4AV MSI mobo, I haven't altered the bios... original/default version & settings
    AMD Athlon XP 1500+
    F.S.B is 133MHz (??)... not to sure on that one
    512 MB RAM Kingston Aluminum
    ATI RADEON 9600 Pro with version 4.6
    Power supply is 330W unknown brand
    Primary IDE Master is 40GB HD
    Primary IDE Slave is 60GB HD
    Secondary IDE Master is TDK CDRW 241040B
    Secondary IDE Slave is JLMS (LiteOn) DVD-ROM
    PCI Slots (other than vid card and wireless card) is the USB card that came with the mobo
    Windows XP Pro with SP1
    I hope that's everything. I'm not sure how to check the core temp other than the BIOS. I have some Thermaltake heat sink monster thing (was big and expensive)... two other standard fans...
    And this is my secondary computer so there's not a lot installed on here... (33GB and 57GB free respectively per HD)
    Any ideas???
    Thanks -> Mr_Self_Destruct
    P.S. the fact that I made it to the end of this posting w/o a crash is remarkable!

    Well there's a 400W PSU in my comp now and my computer is still running really rough. Real herky/jerky. I attempted to download something and the OS froze up almost immediately. So the PSU wasn't the solution.
    And yes... I do have the latest drivers for this wireless card (just checked http://www.dlink.com).
    Any further ideas??  
    As I said before... I can put in an ethernet cable and the comp runs fine. But I don't want to.
    HELP

  • White screen on my Equium L10-300

    Hi all
    New to this site but was wondering if anyone can help me. I have a Equium L10-300 and the screen seems to start going white from the corners in till the whole thing goes white. I have found that by pushing on the top of the screen is the only why to get it back to normal.
    Does this mean that the screen is broken and needs replacing completely or is this caused by another part? Any one who can shed some light on this problem would be greatly appreciated.
    *thanks coop*

    The problem is either the lcd screen or the lcd cable.
    I have seen this occur in the past while fixing laptops, a gradual change to white followed by the whole screen being filled up white.
    If you move the lcd screen backwards and it fixes the issue then I think its a loose lcd cable.

  • Equium L10 doesn't recognise any wireless PCMCIA card that I install

    Hi,
    I've just bought a brand new Toshiba Equium L10 and I can't get any wireless card to install. I have tried different models from Belkin, Netgear and MSI, all of which work perfectly fine on other laptops but not on this one.
    The L10 is a clean Windows XP SP2 build straight from the retailer and I am carrying out the following steps to install the wireless network card:
    1. Start Windows XP SP2 and log on as admin
    2. Run software for the wireless card
    3. Insert wireless card
    At this stage, windows only recognises the wireless card as an ethernet adaptor and won't install the drivers. Even if I install it manually and point it specifically to the correct directory, it still fails to pick up the drivers and says that there is nothing in the directory for the hardware that I am installing.
    I have the latest BIOS for the L10 and have tried all of the following to no avail:
    1. Disable USB legacy support in BIOS
    2. Disable built in ethernet
    3. Run Toshiba PC Diagnostics (reports that everything is working just fine including PCMCIA)
    4. Rebuild laptop using supplied Toshiba DVD
    Does anyone have any idea what could possibly be wrong? This is driving me crazy and I've never had this kind of issue with any other laptop. Is this a known fault with Toshiba laptops and what's the fix?
    Is it a Win XP SP2 problem? Is my laptop faulty?
    Thanks in advance.
    Regards,
    K.
    [Edited by: admin on 06-Apr-06 06:51]

    Can you post the details of this card?
    Did you contact the PCMCIA card manufacture for support? Maybe there is a new driver release for this card.
    I have noticed some problems with a Vodafone PCMICA card on a Satellite P10. This card has caused a blue screen on the unit. Well, the disabling of hyper threading technology in the BIOS has solved this issue. On another cards the new driver release has also solved some strange problems.
    However, what I would say is there are many things which could have a bad influence.
    Firstly I would recommend to ask the card manufacture for a support.

Maybe you are looking for

  • Automatic creation of Notification using T-code IK11

    Hi Gurus,   i got stuck in a requirement, where they want Automatic creation of notification using T-code IK11. I am using EXIT IMRC0001.     Please guide me that with what logic i should go. Thanks Regards VICKY Moderator Message: Vague Question. Ex

  • Indesign CS6 just started crashing when exporting to pdf - help?

    I just got Indesign CS6 a few weeks ago and I'm using it on a new macbook pro. I had exported to pdf a few times with no problem. Today, I tried the same thing and Indesign began quitting for no apparent reason. I already tried restarting my computer

  • Combo box problem

    I have a form with combo boxes that is working fine inside of my movie. But, when I put the movie inside of it's parent movie via loadMovie function, the combo box no longer drops down? The rest of the form is working? Anyone out there that has exper

  • Change data capture in ODI11G

    Can anyone help me with using "change data capture" (simple set) in odi11g. Is there a link for me to follow the various steps to use change data capture with examplle.

  • Cannot configure SCSI controller

    Hi, this task has landed on my desk and i have little or no knowledge of what this involves (lucky me). I am trying to configure a SCSI controller using the cfgadm command and it will not configure? SCSI controllers and attached drives: Ap_Id Type