Equium L350 wont boot, just beeps

Hi Everyone,
I have an Equium l350 laptop model psld2e-003003ks.
It wont boot up it just beeps continually there doesnt seem to be any specific sequence of beeps just continual.
I have tried F8 and started it in safe mode which it does, but when click on "start" it displays "search" and the letter G scrolls along the search box.
I cant do an antivirus scan as it asks for my administrator password which I cant put in as again a series of letters or numbers just scrolls along the box where you input your password.
2 evenings previous I was using my laptop in bed and I got a blue error screen but managed to reboot it ok.
The next night it was fine too. I'm unsure as to whether I have a virus problem or a hardware prob.

Hello
> but when click on "start" it displays "search" and the letter G scrolls along the search box.
This would mean the key G on keyboard stocks and so a continuous beep appears. Maybe you can solve the problem if you try to repair the key: Just move the key a little bit but be careful.
Generally speaking if you exchange the keyboard your problem should be solved and a new keyboard can be ordered from an authorized service provider in your country. On Toshiba website you can find a list with all ASPs.

Similar Messages

T61 wont boot, just beeps

i have a lenovo t61 14" laptop that will turn on, the screen is black and will beep
the sequence is 1 - 3 - 4 -3 any advice?
Thanks

you have a similar problem as this forum member.
http://forum.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61P-6457-HU1-Power-On-Beep-1-3-4-3-on-oc...
Have a read of the post in that list.
You would need warranty support. There is still option of obtaining of post warranty warranty for your system even if you run out of warranty (Thinkplus service agreement).
Moderator edit: Fixed link.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Have a late 2006 iMac with new Ram installed in late 2011 . I am currently running Mountain lion. Did/ hit something while half asleep and was asked for my recovery password didn't know it.Not sure what i did after that but wont boot just searches,

I have a late 2006 iMac with new Ram installed in late 2011or early2012 . I am currently running lion. Did/ hit something while half asleep and was asked for my recovery password, I didn't know it & not sure what I did after that but it wont boot up just searches with a light grey whit -ish screen. Cant get it to clear. Any advice?
Charlies Secret Angel-

Try to boot in Safe mode, see if you are able: Hold down shift and then power on. For wireless keyboards, hold down shift after the chime.
Safe Boot
Resolve startup issues and perform disk maintenance with Disk

P35 NEO-2 FR won't boot just beep beep every 10 seconds

What's wrong with my system, My system won't boot and I get a beep beep every 10 seconds. I was updating my bios using the approved USB flash drive procedure, all I got was a blinking cursor. I rebooted and now my computer won't boot. Is my motherboard dead? I have successfully used the bios flashing tool in the past.

Quote from: Hans Gruber on 11-March-08, 21:47:41
That's a good question.
Another problem has come up. I get CMOS bad check sum error. Press F1 for "can't remember" but it sends me to bios or F2 for default settings. Basically, I can't overclock because of this bad checksum error. Everything runs at stock speed. How do I fix this? On the bright side, I now have bios version 1.8
On a side note for Remus, I never made it to the load new bios screen. The cursor "_" was blinking non stop for several minutes. According to the admins, another user in Germany had the exact same problem that had.
Now, how do I fix the CMOS bad checksum error message?
"Another problem has come up. I get CMOS bad check sum error. Press F1 for "can't remember" but it sends me to bios or F2 for default settings. Basically, I can't overclock because of this bad checksum error. Everything runs at stock speed. How do I fix this? On the bright side, I now have bios version 1.8"
Enter in BIOS and "LOAD BIOS OPTIMIZED DEFAULTS", then "SAVE AND EXIT"
If you still get "CMOS bad checksum error" at next reboot, do this:
Login in your windows, then adjust USB key geometry. Do this:
Quote from: Jack the Newbie on 11-December-07, 05:41:45
Format your USB Flash Drive with >>this<< tool and then retry with "MSI Forum HQ USB Flashing Tool".
And update BIOS via Forum Tool (Re-flash with the same BIOS 1.8) will fix the problem.

ThinkPad X200 7455-D8G not booting, just beeps

Hi All
I've bought a brand new ThinkPad X200 7455-D8G. I also obtained the Windows XP downgrade disks. So here is what happened: I switched it on. Created a Vista Recovery disk. Insert the Windows XP recovery disk. It ran through the whole process using disk 1. Then it said I must reboot to complete the recovery.
I continue to reboot - and that was it. Now there is nothing coming on on the display and it give 1 long beep and 2 short beeps.
I've removed the battery... left it out and put it back - Still the same.
I've removed the memory and put it back - Still the same.
Anyone with some ideas???
Thanks
Jeanne

according to Lenovo, this problem either originates in system board, dimm or LCD connection.
http://www-307.ibm.com/pc/support/site.wss/MIGR-46018.html
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Laptop wont boot just spins

I tried to restart the computer and when it tried to reboot the rotating circle appeared and nothing happens. This happened yesterday and iot's still going on now. I plugged it in thinking it might work but it didn't. I tried all the keyboard escapes, again nothing.

I solved the problem. I held down the power butoon for 5 seconds. It turned off and then turned on just fine.

System failure- Equium A60 wont boot up

Hey guys & gals
first time using this site & need some advice!
I have a toshiba laptop
"equium a60 model no- PSA67E-00200D8J"
Ive been having problems with my start up! i keep getting an error message saying i have a missing driver!
msg reads error- "system32\drivers\ntfs.sys"
Also getting message....
"windows could not start because the following file is missing or corrupt:
system32\DRIVERS\isapnp.sys"
Unfortuntely I cant seem to find my original start up disc & I dont want to lose non backed up files......not too savvy when it comes to problems with this......
Can anyone give some advice please, this is driving me crazy! lol
Alan.

Heyho,
seems you are in big trouble. I think the only chance to backup your files is to get some live linux CD (knoppix, mandrake, ubuntu) and a external harddisk to copy the files from your internal harddisk to the external attached harddisk.
The best way would be to ask a technician or some guy which is VERY familiar with computers to backup your data.
After that you should reinstall your operating system but without the recovery CD you are out of luck. Then you have not many options.
One of these options is to search for the startup disc or how people call it: "Recovery CD". If this one is not available then you should contact a local authorized toshiba dealer or servicepartner and obtain a new recovery disc. The last option is to purchase a Windows XP or ask someone (family, friends, whoever) for a Windows XP for install.
Greetings

My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

My macbook air wont boot up. Just beeps every 5 seconds and a white light flashes on front of keyboard

That normally indicates an issue with system memory. The startup sequence can't complete the boot due to a memory issue. Take it in for service.

I just installed new 8gb ram in my MBP 2010 and it beeps 3 times and wont boot.

I bought 8gb DDR3 1066 mhz to install on my MBP 2010 and it beeps three times during boot and wont boot. I looked at other threads and it seems like no one has found an answer. It looks brand new with no obious problems.

Macs can be very fussy about RAM... It is Important to get the Correct and Matching RAM
You can use these Links to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
http://www.crucial.com

Mac Mini won't boot it just beeps once

I have a MacMini 1.25 GHZ. When I try to start it, it just beeps loudly once and thats it. Nothing appears on the screen.
Before, this computer just showed a folder with a question mark. I tried resetting the PRAM and other normal procedures and nothing seemed to work. I thought the optical drive might have been the problem because this started happening shortly after inserting a CD.
So I opened it up and took out the CD and now I have the current problem.
Can anyone help?
P.S. After beeping, if i press and hold any key the little light on the bottom right flashes brighter three times.

Repair the directory and see if it boots then. Follow my directions below*:
http://www.macmaps.com/directoryfaq.html
- * Links to my pages may give me compensation.

My Macbook wont Boot, Power Light just lights up

I am having a HUGE Problem with my macbook pro. (Early 2011). I already brought this to the mac center but they could not find anything wrong with it. They said that the whole time it was with them their technicians did not find anything wrong with it.
The problem is that it wont boot up. The last time i was able to use my macbook pro (I am using it right now since it booted up) was 2 weeks ago. Today i tried my luck since i really needed to check my files and luckily it did boot up. but before this it would take an hour for it to boot up. After presing the on button the power light will turn on and after a few minutes a whirring sound will be heard. I will then turn off the Mac and turn it on again and the booting up sound will be heard. but last 2 weeks it was just whirring sound and after i turned it off and turned it on it wont boot up anymore until now.
I am really stumped as to what the problem of my Macbook is. Any help would be really appreciated.

Go through the steps - one by one - that ds store outlines in his user tip, Step by step to fix your Mac.
Good luck,
Clinton

Wont boot: I get beeps and flashing sleep light

The PB-T boots to a beeping noise and then the sleep light flashes once: long, then 3 short flashes.
I reseated the RAM and swapped RAM, to no avail.
Wont boot from anything even install disks. Did the PRAM too (which never does anything). Tried the reset switch on the back too. Nothing.
Ideas? I remember the beeps are usually related to RAM. no?
Steve

Hi Steve,
It sounds like you have no good RAM banks, which basically means a new/replacement LB. May not be cost-effective for an older TiBook to replace the LB.
Beep Definitions

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy, after a minute its just white. What to do?

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy but after a minute it just comes up a window thats completely white.
I've tried a lot of things, but my Macintosh classic (with original floppys) runs 7.0.0. And the PowerBook needs atleast 7.0.1 and did run 7.1.0 as original OS.
How do I fix this?

Because your PowerBook 145B shipped with OS 7.1, it can't run an earlier version of the Mac OS, such as 7.0.1. Unfortunately, Apple never made OS 7.1 available for download. You can run OS 7.5.1, 7.5.3, and 7.5.5 on your PowerBook, but I'd recommend doing so with the maximum amount of supported memory - 8 MBs. The 19-part download of OS 7.5.3 is segmented, so that each one will fit on a 1.44 MB floppy disk. The problem is that the 19-diskette set isn't an installer set as such, having no bootable disk. It's solely intended to be used to transfer the individual segments to the resident hard drive in the computer. Once that's done, double-clicking the first .smi segment creates the OS 7.5.3 installer disk image on the desktop, which you drag onto the hard drive icon. This produces a folder with the OS 7.5.3 installer in it. I've done this before with an old Mac LC and it works. You can also download the 3-diskette OS 7.5.5 Update and run that. These downloads can be found on the same page where you found the OS 7.0.1 download: Older Software Downloads.

Ipad mini wont boot up, just pings when plugged into charger

ipad mini wont boot up, just pings when plugged into charger

Hello lorvic9195,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your issue with your iPad not booting. I would suggest looking first at the "Power/Battery" section. The "Battery or charging issues" first and then the "Other issues".
Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support
Regards,
Jeff D.

Equium L40-14L - Wont boot up

My laptop crashed and now wont boot up just comes up with disc read error.
I have tried the recovery disc but this goes as far as choosing the language then seems to crash again any thoughts as to what the problem is?

Hi buddy,
You wrote that your notebook crashed but what happened exactly? Did you get a BSOD or did it shut down immediately?
At the moment I assume your HDD is maybe faulty because you got a disk read error and you can install Windows from the Toshiba recovery disk.
Have you checked the HDD with a diagnostic tool like Drive Fitness Test?

Equium L350 wont boot, just beeps

Similar Messages

Maybe you are looking for