Equium L40-10Z - Need WXP driver for sound an SM bus controller

Was vista, lost system, reformatted and installed XP as no recovery discs for Vista. Now no sound and says SM bus controller unplugged.
Any help please or where can get proper recovery discs (UK). Thank you

Hey,
I think sound doesnt work because you have no drivers installed therefore and also for SM bus controller you have to download the driver on Toshiba page.
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
*Archive* > Equium (Notebooks) > Equium L Series > Equium L40 > PSL41E
But you will see that there are no XP drivers available but what you can do is using the PSL49E model number that supports Windows XP. Usually there is no big difference between these models and the drivers should work on your system too.
For SM bus controller you have to install the chipset driver and for sound card the sound driver but latter requires Service Pack 3.

Similar Messages

  • Satellite L30-114 - Need driver for sound and SM bus controller

    Hi, friends
    Plz I need your help on my Satellite L30-114. Am having problems with the sound and the SM bus controller, even I have downloaded the sound driver and install it, from my device manager sound is not sick, it always telling me my device is working properly? Plz i need help on that.
    Secondly my SM bus controller is sick it has the cormer sign plz how can I rectify it, even my wireless is working fine.
    Only the sound and sm bus controller is giving problems.
    Thanks will be waiting for your replies.
    newton

    Hi
    To be honest I doubt that you have installed all files from the Toshiba website. Normally the Toshiba website contains all drivers and tools that you need to restore factory settings after this there are no more yellow exclamation marks or unknown devices in device manager.
    By the way: What installation order you have used?
    On the Toshiba website you can find the installation instructions document. This is a list for the recommended driver installation order.
    Check this!!!

  • Equium l40 - 10Z. Hard Drive Partition Help

    A family member has a Toshiba Equium L40 - 10Z. The "Vista (C:" drive is full with a total size 55gb, but there is also an "Data  (E" drive with a total size of 54gb on it which is almost empty (Someone installed the game Sims on it)
    Now the problem being is that there is around 20GB worth of music linked into Itunes set up on the C drive, and they want to download more and keep it all togehter on the same drive.
    Is there anyway to make the C drive bigger? I.e. remove / alter the partition size between the C and E drive?
    Or do you have any better options?
    As I don't realy fancy moving all the music and having to tell itunes where all the individual songs are located.
    Many Thanks
    ~Will

    A bit more thought give to the situation, I can probalby just use Itunes to move the whole Itunes media folder over to the E: Drive. Which shouold mean it would recognise the files automaticaly.
    But Is there still any need to have the Hard Drive so largly seperated? If at all?

  • Need driver for C675-S7200 SM Bus Controller

    Hello forum I had a nasty back door trojan and I had to reformat my drive, well now that I have done that evrything has come back fine but under my device manager I have one device that states The drivers for this device are not installed. (Code 28) and its for the SM Bus Controller. I didnt see any chipset drivers under the driver down loads on Toshiba for my laptop so any help is much appreciated Thanks

    Satellite C675-S7200
    had to reformat my drive
    No way to tell what that means. Sounds like maybe you installed a retail version of Windows.
    If so, it's best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. Drivers and utilities will have been installed in the proper order. No activation is required.
    See the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
       Satellite/Satellite Pro C600 Series User’s Guide
    If you failed to burn the recovery discs, you can obtain them from Toshiba.
       Order Toshiba Recovery Media
    -Jerry

  • I need a driver for sound blaster 5.1 VX for windows 7

    Hi , i installed the vista driver in compatibility mode ?for my sound blaster 5. VX in windows 7 but i got a blue screen and in device manager there's a yellow exclamation mark in " multimdedia audio "?stating that no driver is installed . Please can someone give a link to download at least a compatible driver or basic audio . Thanks .

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Need driver for sound (Microstar MS6558)

    I need the driver for the ms6558 motherboard.  My sound card doesn't work, so I either need the onboard sound driver or the mainboard driver itself.  someone help.

    No, there is none to be found. Furthermore MS-6558 seems to be an OEM board made for a PC manufacturer but no MSI retail board. Those are not covered by MSI support or this forum but just the manufacturer.
    None the less from google results it should have a SiS chipset so try here: http://download.sis.com/download/agreement.php?id=155808&url=download_step1.php?id=155808
    If no help contact PC manufacturer.

  • Need driver for Sound blaster CT 5

    Can not locate any reference to a driver for my Ct 5807 card--The device list says there is such an animal but I can't seem to locate a path to a download or one to purchase a disk with the driver--anu advice will? really be welcome--Thanks--Mel

    mrnester,
    It is an OLD Ensoniq card, but you will need to tell us what operating system you need a driver for before any of the forum posters will be able to make a suggestion.
    Daniel

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • Missing files on installing driver for Sound Blaster Adio PCI 64v on win 9

    I've downloaded and run the file 373UP.exe. Then I got the message: Missing file eapci4m.ecw. So, I can't install the driver!!!
    Wher can I find this file?
    With tanks.
    P.S. I li've in Belgium, I'm dutch speaking and I bought in 999 a pentium 2 computer of Packard-Bell. Now I've installed win 98 SE and I needed the driver for my sound card!

    jorisvh,
    This knowledgebase case should cover how to load the wavesets (*.ecw).
    Cat

  • Where can I get an updated driver for Sound Blaster X-Fi for Pavilion D4790Y, Win 7, 64-bit?

    I have a Pavilion D4790Y that I have upgraded to Windows 7, 64-bit.  I need a driver for the Sound Blaster X-Fi sound card, SB0670.  Creative Labs says this card is responsibility of the OEM, which is HP.  Any help?

    Hi:
    Try this one from 5 Apr 2011:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
    Paul

  • Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit.  How can I find it?

    Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit.  Where can I find it, and what file is it?  (Yes, it's an old Distiller that came with Acrobat 5.  So shoot me.  But I do need the driver.)
    Win 7 prompted me for an *.inf file.  Any idea?
    If I find the original Acrobat 5 CD, which .inf would it be?
    (Hey, since I'm asking, also a driver that will work on Win 8.1 Pro 64-bit.)
    Thanks.

    There is no .inf file on the Acrobat 5 CD that you can use to create a “driver.” If Distiller 5 even installs and runs on Windows 7 x64, the plumbing that came with Acrobat 5 to automatically feed PostScript files created by the PostScript driver to Distiller simply won't work with modern versions of Windows or any 64-bit version of Windows.
    FWIW, Acrobat 5 is five full versions back from the current version. And no, we won't shoot you; you are effectively doing that to yourself!  Your time must be worth something?!?! 
                 - Dov

  • Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

    i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

    First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

  • Need a driver for HP Color LaserJet

    Hi, Need a driver for my printer and I can´t figure out how I can get it.
    I have Mac OS X version 10.8.
    Please help!
    Regards,
    Lena-Maria

    According to Apple Support's list of supported printers, yours is supported in Mountain Lion.
    How is it connected to your Mac, Lena?  If it's connected via USB (and I know nothing about this printer) you should be able to go to System Preferences --> Printers and Fax and click on the "+" button. It should pop up in the left hand pane, where all you'd then have to do is select it and add it. It would then load the appropriate drivers.
    Some people have reported they have to reboot their Mac in order to get their printer to show up in the list.

  • I need a driver for Epson Photo Stylus 2200 for OS 10.5.8 PPC

    I need a driver for Epson Photo Stylus 2200 for my  OS 10.5.8 Power PC G5. Does anyone know where to locate one? Epson does not support this version of the Mac. They have  drivers for 10.4 and 10.6, but not for 10.5. Perhaps there is someone has a clue as to where I can find an original driver disk or download  for the my Epson.
    Thanks

    Hmmm, not sure what this Common Updater is, but...
    http://www.epson.com/cgi-bin/Store/support/SupportDownloading.jsp?BV_UseBVCookie =yes&licenseoid=17774&download=https%3a%2f%2fftp.epson.com%2fdrivers%2fepson1428 4.dmg&pn=Stylus+Photo+2200&pc=Epson+Stylus%26%230174%3b+Series&ft=Drivers&return page=%2fsupport%2fsupDetail.jsp&returnparams=%26infoType%3dDownloads%26oid%3d144 02%26platform%3dOSF_M_X5
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14402&infoType=Down loads

  • Hi. I need a driver for  printer Hp scanjet N 6350.

    I need a driver for installing to my iMac, i cany find officially driver Hp Scanjet N 6350. Please help me

    I would recommend VueScan,  you can get a trial copy to test it with then buy the app once you are convinced it works.  You can find it by clicking http://www.hamrick.com/
    Good luck.

Maybe you are looking for

  • IPod doesn't show up in My Computer/iTunes

    I tried the Driver thing with updating even deleting and reinstalling still it doesn't show up in My Computer or iTunes. I did show up like a week ago but then it said it needed a restore or something but now if I plug it in I hear the sound a device

  • Iphone Backup restore Help please

    Does anyone know how to restore your backup after the "restore iphone backup" option is gone, Without having to restore the phone again

  • Problem in transport ID

    Hi gurus, We want to transport our PI 7.1 SP06 scenarios from DEV to QA. We have taken the following actions: - We've registered our TS in SLD from back-end's Tx. RZ70. - We've created our BS - We've imported the SWC to the ESB. - We want to import t

  • How to transfer parameters to ProcessingPage?

    Hi, I want to transfer parameters to ProcessingPage,How to implement it? Thanks!

  • Auto-select precision in Photoshop CS6 is incredibly frustrating

    I have been using CS6 for a while now and one problem that I keep encountering is the auto-selection of shape layers. Trying to auto-select a layer that's within 10 pixels of a shape layer is impossible without having to zoom in. This is a little har