Equium L40-156 - Indicator WLAN sometimes not work

Hello peoples - has anyone any idea wha this is bout?
I cant seem to find a similar problem anywhere. The indicator light for the wireless connection will sometimes not work - as a result i have to manually go into network connection and turn on wireless cap. - this will not turn the light on but does allow me to access the internet.
This happens for a few weeks and then it all rights itself for a few weeks,
Then it happens again.

Hi
Do you mean this issue happens sometimes but in most cases you can enable the WLan properly?
First of all to enable the WLan you have to move the WLan antenna switch to ON (be sure that it has been switched properly to the right) and you have I use the FN+F8 key combination.
Usually this enables the WLan.
Im not sure why the WLan antenna switch does not work sometimes maybe its a hardware issue; for example loose connection or the switch was not moved properly who knows
Maybe it would be a good idea to ask an technician for a WLan switch check...

Similar Messages

  • Equium L40-17M PSL49E - Wlan stoped working after BIOS update

    Hi all,
    I have problem with my lap-top.
    The laptop is Equium L40-17M, model PSL49E-00C005KS.
    Before couple days i update my BIOS with version P20B200 (bios-20080617131309), and after update, internal wireless stop working.
    Show me device is enable but activity is off, and i can't turn on device.
    First thing what i think is "Windows" and i start recovery disk. But after recovery problem is still exist, wireless do not working.
    Then i put external USB wireless, and try to connect with router.
    Computer recognize USB but he also do not working good, therefore the problem is not in wireless (i am not sure for this), but i think that problem is it because laptop can't recognize correctly USB device.
    I want to flash bios with old BIOS but i don't have it
    I will grateful to someone who have same problem, tell me how i fix it.
    Or send me old bios for my laptop.

    My mistake, I don't explain correctly what I done.
    Yet yesterday I download driver for WLAN from Toshiba site and install it, but is no result, problem still exist. Combination FN+F8 is forbidden (no displaying icon or not working signal lamp) - its all the same laptop don't have WLAN. It is absolutely strange.
    My laptop OS is: Windows Vista premium (32bit), and first I download BIOS for Vista version 2 of course (I am not such stupid to download BIOS, before read notice), after problem I download & BIOS for XP (just for test).
    And result from test is: WLAN yet not working, when I push Fn+F8, icon for WLAN show me that device is turn off and every time is always off. No matter what button I push or what command execute. Install driver for WLAN, but its same result at - not working devices.
    After all this operation I flash BIOS, with version for Vista, recover laptop with recovery disk and install driver for WLAN. No matter, my hard working was unjustifiable, device not recognized & not working.
    May be tomorrow I try to install Linux, just for try-out.

  • Is it possible to install windows XP on Equium L40-156

    Hi, I want to install windows XP on my laptop. Is it possible to do it? and where I can get drivers?

    Hi
    Of course its possible to install the XP on this notebook.
    I checked the official Toshiba website and found out that the Equium L40-156 belongs to the PSL49 series!
    This series number is important to get compatible Xp drivers from the Toshiba European driver page.
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    On this page you can find an XP driver package for you notebook!
    Very important is the BIOS update. If you want to use the XP on this Vista notebook you have to update the BIOS to the XP version!!!
    Without the right BIOS some Toshiba features like FN keys could not work!!!
    Best regards

  • Equium L40-156 RAm

    any body has an answer :
    is 200-Pin PC2100 (266MHz) DDR SODIMM  RAM compatible with Equium L40-156 RAm
    thanks.

    Nope.  That system requires DDR2 RAM (667 MHz)  You need THIS memory, not just the type, but the brand.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Does Equium L40-156 supports internal mic

    Hi.
    We have a laptop Equium L40-156.
    We have problem with a microphon!
    We can hear people who are calling us (by Skype) but they can't hear us.
    Is it possible that we don't have a microphon inside a laptop?
    Or is it something wrong with setting?Thak you

    Did you check the microphone device in the Skype options?!
    What device was chosen?
    In my opinion this notebook was not equipped with the internal mic. You will need an external one!

  • [LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

    Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
    See the above post for more information - here's a synopsis:
    CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
    Any ideas? 
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

    X. wrote:
    Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
    Any news on that?
    @mellroth figured out the solution :-)
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • Mark debug 'sometimes' not working

    I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
    Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

    Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
    I'm using Vivado 2014.4.  "Flatten" is set to "None".  The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH.  But when synthesis gets done with them, the names are completely different.
    I don't care if the "equivalent" nets are still there.  I need the names.  Every time synthesis runs, it's a crapshoot whether the names will change.  Particularly bad are 500+ bit buses that get exploded into individual signals.  I don't have the time to regather them into the proper buses every time.
    In general, I've been pleased with the changes in Viviado.  But I can't believe how badly a wonderful tool like ChipScope has been screwed up.
     

  • Equium L40-156: Need spare battery PA3615u-1brm

    Can you help me?
    Do you know if i can get a spare battery for equium l40 156 battery model no pa3615u-1brm?
    cheers

    Google simply for this part number and you will get more than enough hits and different offers.
    Or you will contact the ASP in your country and the guys will order it from the Toshiba Europe directly.

  • Wlan modus not working

    Hi, my wlan is not working.
    I can not move the wlan button to turn it on.
    What do I need to do?

    Hi there.
    You may find the article below helpful.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    -Griff W.

  • Equium L40-156 boot up problem

    I have an Equium L40-156. When I press the power button the power light comes on but there appears to be no hard disk activity. If I manually switch it off by pressing the power button for several seconds, leave it for a couple of seconds and press the power button again it starts normally.
    Any ideas please?

    Hi mate,
    Did you recently updated your BIOS, installed some more RAM/another HDD or some software?? Maybe some driver update??
    Since when does the error appear? And do you have still warranty on it?
    So, if yes, then bring your machine to an authorized service partner and let them check your machine. Would be the best...
    Greetings

  • Uploading Files Using InputFile Component -- Sometimes not working

    Hello,
    This is the 2nd time I make a post about it!
    Because I have more than 1 application using upload, and everything is correct! But it doesn't work as it should!
    You can check the original post here: Uploading Files Using InputFile Component - Sometimes not working
    I need a solution please!
    The only thing we can conclude is that it could be a bug from oracle !!! (???) But I talked with other people and they say that it works fine for them.
    There is one important thing: when we put a form to "Uses Upload = true" it seems that the page doesn't work very normal. For exemple: if you use a table in a form that uses upload the table get's "crazy".
    Thanks,
    JP

    I have now access to METALINK!
    I can find some problems and patches about inputFile but not mine! I will check better later!
    I think the problem is caused because of my framework!

  • Sometime not work = Word Substitution

    10.2.0.415
    BlackBerry 10 os
    please help,
    i use thats version at Q5 BB but i get orror at :
    Prediction and Correction > Word Substitution >
    I cannot use this service, sometimes ok/normal, sometimes not work, its very important to me,
    Thats only my reson why i buy Q5 BB please Help,
    i have much word to explain to my friend, and with that function will help me, and make my finger easy and very health.
    Thank you very much

    yoyongsc wrote:
    Mine doesn't work in all applications, bbm, text, email, etc.
    Verry odd! My Word Sub works well in all of those you've listed.
    It does not work in commenting on BBM group pictures and in some BBM Channel comments... works every where else.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    I have the same issue.
    The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
    With a new battery the same happens, although it can run on battery but does not charge.
    It runs fine on mains power, the green light is always lit.
    I have tried several things so far:
    1. Cleaned the magsafe contacts on cable and macbook
    2. Reset SMC and PRAM
    3. Installed latest battery update
    4. Tried new battery
    5. Put old battery in fridge for an hour
    I work in IT and am fairly confident taking it apart, what should I try next?
    Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before.  Also some people say it will need a new logic/motherboard.
    Any experts here managed to sucessfully fix one of these?

  • Lan and WLan does not work on Satellite L40-18W

    Hi all
    I have TOSHIBA Satellite L40-18W and my problem 1- wireless not work & wired lan does not work.
    I have download driver and every thing is ok but it does not work ( when i search by wireless i do not find any network. My router is working fine)
    plzz help meeeee

    Hi
    Its hard to understand what you mean by not working.
    What does this mean exactly?
    Are you not able to connect to the internet or what?
    Usually if the WLan card and the LAN card have been recognized properly in device manager then the drivers are working fine and the issue could be related to wrong router configuration or maybe to some enabled firewalls, etc
    Firstly I recommend checking the router settings. Check if the router has been configured with the right data from ISP and if all other common options have been set correctly.
    The notebook supports Realtek Wlan and LAN card.
    Check if Wlan card uses the same WLan standard like the WLan router and if right encryption has been used too.

  • Layout adjustment sometimes not working

    I'm in a bit of a panic here. We've set up a file that we're due to deliver to a client today, the file has multiple master pages with various margins.
    Normally in this type of situation we turn on the layout adjustment so that the text frame moves with the margins when the new master is applied. Normally this works just fine, we use it all the time, but for some reason its randomly NOT working! i.e. the text frame stays the size it was.
    There doesn't seem to be any ryme or reason to it, sometimes its a left page, sometimes a right page.
    Any ideas?
    Thanks,
    Ken

    Yeah, I tried. Nothing seems to work all the time as is usually does.
    I'll have to look again and see if I can find some correlation with the
    pages that do not adjust.
    Oy!
    Thanks again

Maybe you are looking for