Equium L40-156: Need spare battery PA3615u-1brm

Can you help me?
Do you know if i can get a spare battery for equium l40 156 battery model no pa3615u-1brm?
cheers

Google simply for this part number and you will get more than enough hits and different offers.
Or you will contact the ASP in your country and the guys will order it from the Toshiba Europe directly.

Similar Messages

  • Equium L40-156 RAm

    any body has an answer :
    is 200-Pin PC2100 (266MHz) DDR SODIMM  RAM compatible with Equium L40-156 RAm
    thanks.

    Nope.  That system requires DDR2 RAM (667 MHz)  You need THIS memory, not just the type, but the brand.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Does Equium L40-156 supports internal mic

    Hi.
    We have a laptop Equium L40-156.
    We have problem with a microphon!
    We can hear people who are calling us (by Skype) but they can't hear us.
    Is it possible that we don't have a microphon inside a laptop?
    Or is it something wrong with setting?Thak you

    Did you check the microphone device in the Skype options?!
    What device was chosen?
    In my opinion this notebook was not equipped with the internal mic. You will need an external one!

  • Is it possible to install windows XP on Equium L40-156

    Hi, I want to install windows XP on my laptop. Is it possible to do it? and where I can get drivers?

    Hi
    Of course its possible to install the XP on this notebook.
    I checked the official Toshiba website and found out that the Equium L40-156 belongs to the PSL49 series!
    This series number is important to get compatible Xp drivers from the Toshiba European driver page.
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    On this page you can find an XP driver package for you notebook!
    Very important is the BIOS update. If you want to use the XP on this Vista notebook you have to update the BIOS to the XP version!!!
    Without the right BIOS some Toshiba features like FN keys could not work!!!
    Best regards

  • Equium L40-156 boot up problem

    I have an Equium L40-156. When I press the power button the power light comes on but there appears to be no hard disk activity. If I manually switch it off by pressing the power button for several seconds, leave it for a couple of seconds and press the power button again it starts normally.
    Any ideas please?

    Hi mate,
    Did you recently updated your BIOS, installed some more RAM/another HDD or some software?? Maybe some driver update??
    Since when does the error appear? And do you have still warranty on it?
    So, if yes, then bring your machine to an authorized service partner and let them check your machine. Would be the best...
    Greetings

  • Equium L40-10Z - Need WXP driver for sound an SM bus controller

    Was vista, lost system, reformatted and installed XP as no recovery discs for Vista. Now no sound and says SM bus controller unplugged.
    Any help please or where can get proper recovery discs (UK). Thank you

    Hey,
    I think sound doesnt work because you have no drivers installed therefore and also for SM bus controller you have to download the driver on Toshiba page.
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    *Archive* > Equium (Notebooks) > Equium L Series > Equium L40 > PSL41E
    But you will see that there are no XP drivers available but what you can do is using the PSL49E model number that supports Windows XP. Usually there is no big difference between these models and the drivers should work on your system too.
    For SM bus controller you have to install the chipset driver and for sound card the sound driver but latter requires Service Pack 3.

  • Equium L40-10X: Need details about memory

    I am thinking of upgrading the RAM memory on the above, but can't find the model or specification on the UK website (other members of the Equium family range are on the "Laptops" section of the webpage, but my model frustratingly is not!) -
    I am particularly interested as I want to get the correct type of memory (original or generic) - can users help me on this?.
    My main reason for increasing the RAM memory is that the laptop seems disappointingly slow with the standard 1GB ram which i belive is fitted as 2 x 512mb -
    If any users have any other tips for speeding the laptop up, please let me know.
    Incidentally, powering up takes about 50-60 seconds and shutdwon 40-50 seconds, is this normal.
    The laptop is currently as per facory fit specification.

    The ram required is pc2 5300 200pin sodimm.
    You can purchase this from dabs.com for appx £30 for the 2gb kit ( 2 x 1gb modules) .
    I also did this and it makes the equium L40 run better. This along with vista sp1 and the atheros wifi driver version 7.6.0.70 from this site made my notebook a much better pc.
    You can use the crucial memory selector on the dabs site to go exactly to this ram then place your order.
    Good luck.

  • Equium L40-10X: Need German keyboard number

    hi,
    i search the product number off the german keyboard, equium L40-10X
    thx 4 help.
    XAM

    Just simply call the ASP in your country and the guys will provide the right and compatible keyboard number.
    You can also order such keyboard from these guys!
    In my opinion its an easiest and safely way to order a compatible part for the Toshiba notebook!

  • Re: Equium L40-156 - How can I turn on wireless?

    Please help!
    Toshiba Equium lL40-156 wireless swich or FN+F8 wont turn on wireless function.
    Never used it before but the light used to come on.

    Hello
    If you want to enable WLAN card you must move WLAN switch to position ON and then use FN+F8 key combination to enable WLAN card.
    I don't know what do you mean with your last posting but if you install Vista again the WLAN card will be installed properly and must be shown in device manager.
    When finished do what I wrote and I am pretty sure the WLAN card will be enabled properly.
    Good luck!

  • Equium L40-156 - Vista to XP

    I made my own copy WinXP, I used nLite to put sata drivers, I made boot cd with new XP, when I restarted my laptop I can see DOS screen.
    Do you know what command I have to use to start XP instalation?
    Thanks

    The nLite program creates a simply, bootable XP CD!
    You dont need any commands to start the OS installation. You have to boot from the new XP CD and the OS setup should start.
    If this not possible then I assume you did something wrong and the new created XP CD is not bootable.
    In such case I would recommend to create new XP CD and to implement the Intel Storage Manger again!
    Best regards

  • Equium L40-156 - Indicator WLAN sometimes not work

    Hello peoples - has anyone any idea wha this is bout?
    I cant seem to find a similar problem anywhere. The indicator light for the wireless connection will sometimes not work - as a result i have to manually go into network connection and turn on wireless cap. - this will not turn the light on but does allow me to access the internet.
    This happens for a few weeks and then it all rights itself for a few weeks,
    Then it happens again.

    Hi
    Do you mean this issue happens sometimes but in most cases you can enable the WLan properly?
    First of all to enable the WLan you have to move the WLan antenna switch to ON (be sure that it has been switched properly to the right) and you have I use the FN+F8 key combination.
    Usually this enables the WLan.
    Im not sure why the WLan antenna switch does not work sometimes maybe its a hardware issue; for example loose connection or the switch was not moved properly who knows
    Maybe it would be a good idea to ask an technician for a WLan switch check...

  • Replacement charger for Equium L40-156

    Hi,
    Can anyone tell me where I can get a replacement charger for this model please?
    Thanks

    I believe you can buy them from Authorized Service Centers
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  • Equium L40 - upgrade questions

    Hi, I have an Equium L40-156 PSL49E running Vista Home Premium.
    I have 3 questions: (due mainly to a desire to upgrade things)
    1. What is the max hard drive capacity supported?
    2. What is the max memory configuration suppored?
    3. What are the benefits of upgrading to BIOS 2.00-WIN?
    Thanks in advance for any assistance, regards, Chris.

    Hello
    I will try to help you with your questions:
    Friend of mine has Satellite L40 and I can confirm that you can upgrade it with 200 GB SATA HDD. Service told him it is max capacity according the Toshiba.
    Is this enough for you?
    RAM can be upgraded up to 2 GB. It is the max supported value.
    About BIOS updates there are no specific information. If your notebook runs well you must not update it at all.

  • Satellite L40-13G - need more powerful battery

    Hello! My current battery No is PA3591U-1BRS. I need a battery that can provide me more than 2 hours of working. Can you advice me something?
    Thanks!

    Hello
    As you know Toshiba offers more powerful batteries for some notebook models. More powerful batteries are offered for business line notebooks only. Unfortunately for your Satellite L40 there are no other batteries as those you already have.
    Satellite L40 seems to be low budget notebook and there are no much options offered for it. :(
    Bye

  • Equium L40 start problem

    Hi
    I have to use F1 to start my Equium L40 every time i tun it on. It will then boot up ok but it has forgoten the time and date, once i update the time/date, the computer works perfectly i can access all my email accounts etc without having to re set anything.
    The problem started after replacing the battery due to the old one being almost completely dead. I've noticed that the computer will not run on AC alone without the battey fitted but is still charging the battery ok. (so the adapter is ok)
    I like the computer and don't really want to buy a new one but it's very frustrating and time consuming when i turn it on.
    Maybe there is a back up battery i can change to repair the fault?
    Any help would be appreciated?

    Thanks for the advice i must admit i havn't had the unit on charge for more than about 4 hours so i'll give it a try.
    My suspicion is that a circuit has overheated and failed because it's been overloaded trying to charge a worn out battery and is causing the issue of not working on the ac adapter alone.
    It's not too much of a stretch of imagination to think that the failed circuit also charges the Bios battery so it may be just flat not faulty! (in which case a long charge may have no effect)
    If the long charge fails i may need advice on stripping the computer, recognising the Bios battery so that i can test it.
    Has anybody got a repair manual or know where to get one?
    I'll let you know what i find
    Thanks

Maybe you are looking for

  • Row Total

    Using a formatted search is there a method to total a column for several row items?  Eg Total gross profit for a sales order. Regards Zabe

  • How to display events of only one IPS in Security Monitor?

    Hello, i searched the forum with no result. I have CW 2.2 with IDSMC 2.1. I got two IPS and 2 IDSM-2 (4.x is in production / 5.x is in test) which have all their four interfaces sniffing in different network segments. Now i am flooded by the thousand

  • Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

    I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running

  • GE70 and Windows 8.1 Update

    Hi there, I was wondering if anyone has managed to update their GE70 running a pre-installed Windows 8 64bit to the Windows 8.1 that Microsoft rolled out. The update shows up in the Store but download doesn't seem to start. I tried downloading the IS

  • Two triggers in the same table and event

    If I created two triggers on the same table and event (before insert), which of them will be triggered first ?... The problem from the beginning is that I created the second one as after insert and in the body of the trigger I wrote (:new.xxx:= value